Thermaltake View 31 TG Tempered Glass Mid-Tower Chassis
The View 31 TG Tempered Glass Mid-Tower Chassis features dual durable 4mm thick tempered glass window, riser GPU support bracket with optional PCI-e riser cable, two preinstalled 140mm Riing Blue fans with removable filters, and outstanding system ventilation. The View 31 TG supports the latest PC hardware and all high-end GPU solutions, guarantees on unparalleled expandability for high-end configurations and liquid cooling system to satisfy the market where users have opted for stylish PC chassis with advanced features and aesthetic appeal.

Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.

Left and Right 4 mm Thick Tempered Glass Window Design
View 31 TG with left and right 4 mm thick tempered glass window guarantees the durability of the window; moreover, the enlarged window design permits users to fully display and admire all components of the liquid-cooling system. Show off your dedicated set in the subtlest manner!

Fully Modular Concept
The View 31 TG comes with fully modular drive cages that provide the ease of installation/removal and maximize the interior space for custom cooling loop. Especially, the tool-less drive bay design allows users to freely interchange the 3.5” and 2.5” hard-drives to suit their particular needs.

Riser GPU Support Bracket
Specially designed with dual GPU placement, the View 31 TG has the support for vertical graphic card layout with dual PCI-E slots design. The PCI-e riser cable is optional. Plus, the included riser GPU support bracket not only can prevent the graphic card from sagging, but also helps to reduce the weight on the motherboard.
Thermaltake PCI-e X16 Riser Cable (Optional) – Support a wide range of GPU solutions.

Dust Reduction
Magnetic fan filter on the top simply attaches the filter for dust filtration. Super fine fan filters with excellent protection and reduction against dirt and dust at the bottom.

Made for High-End PCs with Outstanding Expandability
The View 31 TG features its cable management with maximum 50mm in width, and supports up to a tower CPU cooler with maximum height 180mm, and a dual expansion slot VGA of up to 420mm in length without HDD rack. Moreover, the View 31 TG has the ability to accommodate multiple 3.5”/2.5” storage devices at the same time. Most importantly, the hidden drive bay design guarantees expandability for more liquid cooling components.


Advanced Ventilation
The View 31 TG Series delivers advanced cooling performance for DIY/AIO liquid cooling and air cooling systems. With wide top-to-bottom side ventilation grills, the View 31 TG maximizes the air intake with two built-in 140mm Riing Blue LED fans. It includes options for up to (3) 120mm or 140mm front fans, combined with (2) bottom mount 120mm fan locations for maximum fan space selection. Dissipate heat properly with (1) rear built-in 140mm fan and (3) sectional top mounts to manage proper air flow in and out.

Two bay 3.5 drive cage for the MasterCase 5 series. Leverage the MasterCase 5s unique clip-and-click panel to easily add, adjust, or remove drive cages. Just click in the cages and use the thumbscrews to secure it in place.

The PC-Q37 boasts beautiful tempered glass and brushed aluminum panels. Adopting the latest SFX-L PSU standard, the PC-Q37 has slimmer proportions than our previous dual-chambered cases: a mini tower rather than a cube chassis. This makes a beautiful showcase for high-end PC builds without taking up too much deskspace.

Like its big brothers the PC-O9 and PC-O10, the PC-Q37 is split into two compartments to make tidy builds a breeze. The main compartment mounts the motherboard, expansion cards, and cooling equipment; the back compartment hides the PSU and drive racks. This layout allows builders to highlight their best bits with oversized tempered glass, while effortlessly keeping wires and unsightly components tucked away.

The PC-Q37 is a mini tower supporting Mini-ITX motherboards. Despite its compact size, it accommodates the largest VGA cards as long as 310mm on its two expansion slots. Users can install CPU coolers up to 120mm tall and PSUs as long as 220mm. The main compartment can house up to four 120mm fans on the top and bottom panels for an efficient bottom-to-top airflow or, alternatively, a radiator fitting 300mm x 120mm x 80mm. Why have big beautiful sheets of glass if there’s nothing exciting to show inside?

The back compartment hides a rubber vibration-dampening drive rack supporting one 2.5” and two 3.5” drives. The front IO panel includes two USB 3.0 and HD audio ports, with headers tucked aside in the PSU and drive compartment, keeping the main compartment unfettered and wire-free at the get-go. Like the O-series, the PC-Q37 features an all-aluminum and tempered glass construction with removable, washable mesh filters on the fan intake mounts.

The PC-O10 is a streamlined and modern mid tower case. By adopting the SFX/SFX-L PSU form factor, this chassis has a much slimmer profile compared to its PC-O9 and PC-O8 cousins. Lian Li cut the proportions to match that of a conventional tower, while maintaining the attractive and functional half glass, half aluminum design. With power efficiency ever on the rise, and an increasing number of high-wattage SFX-L PSUs available, enthusiasts no longer need to encumber their cases with bulky traditional ATX PSUs.

In spite of its leaner dimensions, the PC-O10 still fits E-ATX and Full ATX as well as microATX motherboards. With seven expansion slots, it supports multi-GPU setups with VGA cards as large as 340mm: plenty of room for even the best gaming builds. It accommodates CPU coolers as tall as 130mm. The PSU compartment can store up to four 3.5” and two 2.5” drives, with space in the main glass compartment for an additional 2.5” SSD. The dual-compartment layout puts attractive components in the limelight, while keeping cables, drives, and other less desirable parts out of sight.

You can purchase the optional O10-1 accessory kit to show off a dual-slot VGA card vertically with a riser cable in the same manner as the PC-O7. The kit replaces the standard expansion slot covers. Showcase your top-end graphics card with a unique orientation!

The bottom panel has mounts for two 120mm or one 140mm intake fan, with space for two 120mm outtake fans on the top panel. The back panel can additionally mount two 80mm fans. You can instead opt to install a 240mm radiator fitting 320mm x 120mm x 90mm on the top panel.

The PC-O10 includes two USB 3.0 and HD audio ports on its front panel. All of its fan mounts include removable, washable mesh filters to keep the case dust free. Water cooling enthusiasts will appreciate a removable, dedicated pump plate in the glass compartment with grommeted pass-throughs between compartments for elaborate custom loops.

Rugged, Sleek and Simple
Carbide Series 270R is compact and engineered for building high-performance yet minimalist systems.

Builder-friendly internal layout
Simple and intuitive internal layout enables easy and quick building

Versatile cooling options
Room for up to a 360mm radiator in front, 240mm radiator at top, and 120mm radiator in the rear

Expansive storage space
Rugged construction steel drive trays provide ample of room for additional drives

Clean and minimalist exterior design
Unobstructive panels deliver an understated look

Built-in cable routing
Cable routing compartment enables effortlessly clean builds

Direct Airflow Path
Provides airflow to the hottest components without any interference from drive cages

Look Hot. Run Cold.
Take advantage of Direct Airflow Cooling as well as ample room for radiators in the front, top and rear. Keep your rig running cool and quiet with 270R’s enormous cooling potential.

Keep it Clean
Unobstructive exterior panels provide an understated look for an overall clean and minimalist design. The subtle cable routing compartment makes it even easier to achieve an effortlessly clean build.

Thermaltake Versa C21 RGB ATX Mid-Tower Chassis
The new Versa C21 RGB Mid-Tower chassis is perfectly designed for gamers to build a high-end but stylish gaming system. Featuring stunning RGB LED light, users can add a personal touch with 7 vibrant colors. Additionally, the Versa C21 RGB supports up to a standard ATX motherboard. Most importantly, the spacious interior design offers plenty of space for users to install the latest PC hardware, AIO and DIY liquid cooling solutions.
*Riing RGB Fan is Optional
*The product picture(s) is only for your reference, it may differ from the actual product.

Tt LCS Certified
Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design and hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features and fitment.

* Click the icon for function display

Gorgeous RGB LED Illumination
With 7 distinctively gorgeous illumination display colors, the Versa C21 RGB is an ideal chassis for those who want to show their style and personality in a subtle manner. The light is visible from all angles. Users can use the LED controller on the top panel to switch between four different lighting schemes, including 7 multicolored mode, breathing light mode, single color mode (red, green, blue, purple, cyan, yellow and white) and blink mode.

Fully Modular Concept
The fully modular drive cages minimize the hassles of installation and removal. Especially, the 3.5” & 2.5” drive bay is applied tool-less design that allows users to freely interchange the hard-drives to suit their particular needs. Moreover, the trio drive bay concept of “2+2+3” offers a good ratio for accessories and storage devices.

*Top-front control I/O panel

Handy I/O Ports
The top-front panel is designed a USB 3.0 data transfer port along with two standard USB 2.0 ports and a LED controller, to grand direct access when needed. The Versa C21 RGB is also equipped with two fan speed controllers on the top-front panel. Each fan speed controller can control up to two fans.

Superior Hardware Support
The Versa C21 RGB supports motherboards up to standard ATX, a tower CPU cooler with maximum height 160mm, and a dual expansion slot VGA of up to 390mm in length without front fan. Moreover, with the tool-free design, users can easily mount up to three 2.5”, two 3.5” and two 5.25” storage devices into the build at the same time.

Outstanding Ventilation
The Versa C21 RGB’s unparalleled cooling ability offers with various mounting points to support any type of cooling you can dream of including DIY/AIO liquid-cooling systems and air-cooling units. Users are allowed to install up to 360mm DIY liquid cooling radiator, 240mm AIO liquid cooler or two 140mm fans at the front; two 120mm on the top and a rear 120mm fan. In addition, all intake ventilation holes are specially designed with removable dust filters to keep the interior dust free.

Clearly Superior
With immaculate tempered glass enclosing the entire chassis, every component of your build is on display for all to see, including three vivid SP120 RGB LED fans and a built-in LED controller.

The Final Frontier
Room for up to 6 case fans, and fully compatible with 360mm, 280mm, and 120mm radiators. Removable fan trays in the front and top of the chassis allows for additional space or mounting cooling outside of the chassis.

Four-panel tempered glass on every side of the case
Possibly the most beautiful case CORSAIR has ever made. With tempered glass enclosing the entire chassis, every component of your build is on display for all to see.

Direct airflow path to keep your CPU and GPU running cooler
Light up your build with brilliant LED effects. Three included SP120 RGB LED fans and included LED controller keeps your components running cool.

Room for practically anything
Create as much space as you want with room for up to 6 case fans, virtually every size radiator or by removing fan trays.

Cable management made simple
Cable routing channels with included velcro cable straps for clean cable management.

Direct Airflow Path
Drive cages are moved up and out of the path of cool air from the front intake fans and high-temperature components.

Minimal setup
With tool-free drive installation and three-point dust filter access, the CORSAIR Crystal 570X is easy to build — and even easier to keep clean. You’ll spend less time on setup and maintenance, and more time enjoying your PC.

BEAUTIFULLY TEMPERED
Beautifully simple and engineered to perform: the Crystal 460X has two-panel tempered glass, Direct Airflow cooling technology, is compact, expandable, and with one AF140L red LED and one AF120L fan, you can customize to your heart’s content.

FREEDOM TO CUSTOMIZE
We’ve engineered the Crystal 460X to pack all the performance and expandability you need into a beautifully modern and compact case design. Put your build on display through beautiful two-panel tempered glass and keep it all running cool and quiet with Direct Airflow technology.

LIQUID COOLING CAPABLE
With room for front, top, and rear radiators, you can choose to quiet down your GPU and CPU with liquid coolers just about wherever you want to.

DIRECT AIRFLOW PATH
Drive cages are moved up and out of the path of cool air from the front intake fans and high-temperature components.

ONE AF140L RED LED AND ONE AF120L FAN
Accent your build with the brilliant red LED effects and draw ample cool air directly to your components without the turbulence that can cause fan hum.

PSU AND 3.5” BAY COVER
Clean up the inside of your case by placing cables and drives behind two modular, clean, and refined PSU and 3.5” bay covers.

MINIMAL SETUP
With tool-free drive installation and three-point dust filter access, the CORSAIR Crystal 460X is easy to build — and even easier to keep clean. You’ll spend less time on setup and maintenance, and more time enjoying your PC.

UPGRADE TO RGB
Take your build to the next level with the Crystal 460X RGB version. Fully equipped with three SP120 RGB fans, change the lights to suit your mood with the integrated three-button lighting controller.

Beautifully simple and engineered to perform: the Crystal 460X has two-panel tempered glass, Direct Airflow cooling technology, is compact, expandable, and with three SP120 RGB fans, is not afraid of the spotlight.

Three SP120 RGB LED fans
Light up your build with brilliant LED effects and draw ample cool air directly to your components without the turbulence that can cause fan hum.

Room For Activities
We’ve engineered the Crystal 460X to pack all the performance and expandability you need into a beautifully modern and compact case design. Put your build on display through beautiful two-panel tempered glass and keep it all running cool and quiet with Direct Airflow technology.

Style Is Everything
Built into the chassis are three striking SP120 RGB fans. Make your build stand out from the crowd by coordinating the custom-molded translucent blades with your build for a sleek, brilliant look -- all visible through the tempered glass panels.

Clean, modern lines with an all steel exterior
Get rid of those plastic cases – the 460X has full steel front and top panels for extra durability and gorgeous good looks.

Compact design, full size capabilities
Don’t let the compact dimensions of the 460X fool you - it can house a full ATX motherboard and multiple GPUs.

Liquid cooling capable
With room for front, top, and rear radiators, you can choose to quiet down your GPU and CPU with liquid coolers just about wherever you want to.

Direct Airflow Path
Drive cages are moved up and out of the path of cool air from the front intake fans and high-temperature components.

PSU and 3.5” Bay Cover
Clean up the inside of your case by placing cables and drives behind two modular, clean, and refined PSU and 3.5” bay covers.

Minimal setup
With tool-free drive installation and three-point dust filter access, the CORSAIR Crystal 460X is easy to build — and even easier to keep clean. You’ll spend less time on setup and maintenance, and more time enjoying your PC.

With the 2.5” solid state drive prices dropping and their capacity increasing, there are more and more computer users starting to upgrade their hard disk drive to SSD. If you are computer literate, you may have more than one 2.5” SSD installed in your system. Since every computer has limited hard drive slots, what will happen if you are running out of storage space but at the same time your system is out of physical drive slots for adding more drives? The ICY DOCK Flex-Fit Quattro MB344SP HDD / SSD bracket is your answer. The Flex-Fit Quattro takes up to 4 x 2.5” HDD / SSD and only uses 1 x external 5.25” bay. The space saving design allows you to optimize your storage density and free up your valuable hard drive slots. With a tool-less drive installation design, the Flex-Fit Quattro lets you to easily insert or remove the HDD / SSD without dismounting the entire bracket from the system. This is extremely useful when adding additional HDDs / SSDs to your system, simply open the side panel of the PC case; insert the new HDD / SSD into the bracket and then plug in the cables and you are ready to go!

Effortless Installation

The Flex-Fit Quattro MB344SP is our most advanced quad 2.5” HDD / SSD bracket and we’ve designed this unit to be both user-friendly and highly flexible. The Flex-Fit Quattro MB344SP accepts up to 4 x 2.5” SATA HDD / SSD drive from 7mm to 9.5mm in drive height, which uses a completely new tool-less drive installation design with an advanced drive stabilizer system to simplify our drive installation process –all you need to do is insert the drive, and push inwards until an audible “click” is heard to indicate that the drive is securely installed. The drive stabilizer kits will automatically conform to different drive height and adjust the drives in place while providing full access to the drive. Lastly, the easy to access drive eject button allows for quick hard drive swapping in a matter of seconds without removing the entire bracket from the chassis. The best part about this bracket is it’s completely tool-less drive installation –just insert the drive and you’re set. It does not get any easier.

Better Organization, Better Productivity

With MB344SP’s high drive density design, you can put up to 4 x 2.5” HDD / SSD altogether in a single 5.25” bay for better cable management and system cooling performance. To install the Flex-Fit Quattro, simply remove the 5.25” drive bay cover, insert the Flex-Fit Quattro into the 5.25” bay and secure it with four screws. Finally, install the 5.25” bay cover back to the computer case and it is ready to use! On top of that, the Flex-Fit Quattro MB344SP can be used as an external drive organizing rack, with the option to stack multiple brackets on top of each other to create a cost-effective storage tower. This is extremely handy for people who have large collections of 2.5” drives such as media professionals.

Beautifully Crafted Design

Our Flex-Fit Quattro MB344SP is constructed with highly robust ABS plastic and fuses desirable traits such as durability and light weight. Using a sturdy plastic open frame design provides excellent durability and passive cooling factor which as a result, reduces the chances of mechanical failures while using the bracket. The open air frame design allows the drives to be cooled by the internal fans in your chassis. Along with our skeletal design, the Flex-Fit Quattro allows airflow in all the crucial areas of the drive which helps the drive's performance.

Suggested Applications

Any system with external 5.25” bay

Key Features

- Fits 4 x 2.5” SATA HDD / SSD into a single extermal 5.25” bay
- Compatible with 2.5” HDD / SSD with 7mm to 9.5mm drive height
- Tool-less drive installation design with advanced drive stabilizer system
- Compatible with any standard external 5.25” bay
- Open frame design for maximum passive cooling
- Option to be used as a stackable drive organizing rack

Two Compartment Design

The PC-O8 features a two compartment design,separate the system into two compartments, one is motherboard and graphics card section, another one is 3.5″ HDD and power supply unit section.

Modular HDD Rack

HDD rack can support six 3.5″ drives and two 2.5″ drives.

LED RGB Color Changing Kit (LED50RGB-2)

Complete kit including waterproof LED strip, cord clip, dimmer and controller.

Water Cooler Support

The PC-O8 is designed to support the majority of commercially available integrated water coolers.

Maximum Capability

VGA Card length: 370mm / PSU length: 298mm / CPU cooler height: 170mm

LED RGB Color Changing Kit
Complete kit including waterproof LED strip, cord clip, dimmer and controller.

HDD Rack
HDD rack can support two 3.5″ drives and two 2.5″ drives.

- Supports SFX PSU
- Dual Graphics Card Support
- PCI-E Riser

LED RGB Color Changing Kit
Complete kit including waterproof LED strip, cord clip, dimmer and controller.

HDD Rack
HDD rack can support two 3.5″ drives and two 2.5″ drives.

- Supports SFX PSU
- Dual Graphics Card Support
- PCI-E Riser

Exquisitely Modest Aesthetic Design

The IN WIN team presents the 303, a simple, yet elegant computer chassis crafted from steel and tempered glass. The distinctively clean front panel is complemented with a bright LED design to balance the overall appearance.

Radiant Luminosity

The IN WIN logo is highlighted “Neon” as well as the lucent stripped I/O front panel. These gorgeous LEDs also have the purpose of indicating when the PC is activated.

Accelerated Tool-less Design

In Win has set a standard for being an innovative computer hardware company. Mission accomplished with the 303 since it has perfected a tool-less design by being able to remove the beautiful 3mm tempered glass side panel by just pressing the handle.

User Friendly Dust Filter

This easily accessible dust filter has an embedded design for quick removal. It’s conveniently located on the bottom, and removing dust has never been easier.

Overall, the 303 can accommodate two radiators (top and rear) and three fans at the bottom providing users with a well-cooled rig. The cool air intakes from the bottom creates efficient air flow for quick heat dissipation.

In Win's Attention to Detail

The 303 is constructed with 1.2mm SECC, supports 2.5”and3.5” drive bays, and its separate PSU chamber provides an ideal climate without interfering with the motherboard and graphics card area. The specialized GPU holder can provide extra support to graphics cards. Yet another detail IN WIN oversees and manufactures to make PC building much easier.

Thermal-Flow
Intake the cool air through the front two 120mm fans, and exhaust the hot air out by the rear 120mm fan.

- New Tool-less HDD Tray System
- Hard disk installation is quick and easy.
- Supports four 3.5” or 2.5” HDDs.
- The HDD tray can be removed to make more room for high-end graphics cards.

Two Compartment Design
The PC-O9 features a two compartment design,separate the system into two compartments, one is motherboard and graphics card section, another one is 3.5″ HDD and power supply unit section.

Modular HDD Rack
HDD rack can support six 3.5″ drives and two 2.5″ drives.

LED RGB Color Changing Kit
Complete kit including waterproof LED strip, cord clip, dimmer and controller.

Water Cooler Support
The PC-O9 is designed to support the majority of commercially available integrated water coolers.

Maximum Capability
VGA Card length: 290mm / PSU length: 290mm / CPU cooler height: 160mm

Two Compartment Design
The PC-O9 features a two compartment design,separate the system into two compartments, one is motherboard and graphics card section, another one is 3.5″ HDD and power supply unit section.

Modular HDD Rack
HDD rack can support six 3.5″ drives and two 2.5″ drives.

LED RGB Color Changing Kit
Complete kit including waterproof LED strip, cord clip, dimmer and controller.

Water Cooler Support
The PC-O9 is designed to support the majority of commercially available integrated water coolers.

Maximum Capability
VGA Card length: 290mm / PSU length: 290mm / CPU cooler height: 160mm

Cool, Clear, and Compact.
We’ve engineered the Carbide Clear 400C to pack all the performance and expandability you need into a beautifully compact case design. Put your components on display through the gorgeous, full-size window panel that opens with a touch — and keep it all running cool and quiet with Direct Airflow technology.

Easy to build, hard to beat
With a one-touch side panel, tool-free drive installation, and three-point dust filter access, 400C is easy to build and even easier to keep clean. You’ll spend less time on setup and maintenance, and more time enjoying your PC.

Hinged and latched full side panel window
Easily access your components with a single touch – and when it’s closed, enjoy viewing every part of your build through the full side panel window.

Clean, modern lines with an all steel exterior
Get rid of those plastic cases – the 400C has full steel front and top panels for extra durability and gorgeous good looks.

Direct Airflow Path
One way to reduce noise is to make sure your fans don’t work harder than they have to. By removing the drive cages behind the intake fans, we provide a more efficient direct airflow path to your hottest components, the CPU and GPU. It’s just a smarter design.

Compact design, full size capabilities
Don’t let the compact dimensions of the 400C fool you. It can house a full ATX motherboard and multiple GPUs.

Liquid cooling capable
With room for up to a 360mm radiator in front, a 240mm radiator on top, and a 120mm radiator in rear, you can choose to quiet down your GPU and CPU with liquid coolers just about wherever you want to.

Two included AF series fans
Great airflow doesn’t have to be noisy -- the AF120L and AF140L fans can push good amounts of air across your hottest devices without that annoying fan hum, and the direct airflow design of the 400C provides an excellent path for cold air to get to your hottest parts.

PSU and 3.5” Bay Cover
Clean up the inside of your case by tucking all those cables and less-attractive drives behind two modular, clean, and refined PSU and 3.5” bay covers. Or remove them for assembly – it’s up to you.

Easy to clean
Easily access dust filters on front, top, and bottom mean you’ll never spend more than a minute getting dust out of your system.

Exquisitely Modest Aesthetic Design

The IN WIN team presents the 303, a simple, yet elegant computer chassis crafted from steel and tempered glass. The distinctively clean front panel is complemented with a bright LED design to balance the overall appearance.

Radiant Luminosity

The IN WIN logo is highlighted “Neon” as well as the lucent stripped I/O front panel. These gorgeous LEDs also have the purpose of indicating when the PC is activated.

Accelerated Tool-less Design

In Win has set a standard for being an innovative computer hardware company. Mission accomplished with the 303 since it has perfected a tool-less design by being able to remove the beautiful 3mm tempered glass side panel by just pressing the handle.

User Friendly Dust Filter

This easily accessible dust filter has an embedded design for quick removal. It’s conveniently located on the bottom, and removing dust has never been easier.

Overall, the 303 can accommodate two radiators (top and rear) and three fans at the bottom providing users with a well-cooled rig. The cool air intakes from the bottom creates efficient air flow for quick heat dissipation.

In Win's Attention to Detail

The 303 is constructed with 1.2mm SECC, supports 2.5”and3.5” drive bays, and its separate PSU chamber provides an ideal climate without interfering with the motherboard and graphics card area. The specialized GPU holder can provide extra support to graphics cards. Yet another detail IN WIN oversees and manufactures to make PC building much easier.

Two Compartment Design
The PC-O8 features a two compartment design,separate the system into two compartments, one is motherboard and graphics card section, another one is 3.5″ HDD and power supply unit section.

Water Cooler Support
The PC-O8 is designed to support the majority of commercially available integrated water coolers.

Maximum Capability
VGA Card length: 370mm / PSU length: 298mm / CPU cooler height: 170mm

Two Compartment Design
The PC-O8 features a two compartment design,separate the system into two compartments, one is motherboard and graphics card section, another one is 3.5″ HDD and power supply unit section.

Water Cooler Support
The PC-O8 is designed to support the majority of commercially available integrated water coolers.

Maximum Capability
VGA Card length: 370mm / PSU length: 298mm / CPU cooler height: 170mm

Thermal Flow
Intake the cool air through the front two 120mm cooling fans.

Maximum Compatibility
Expansion Card length: 410mm / CPU cooler height: 160mm / PSU length: 210mm

Thermal Flow
Intake the cool air through the front two 120mm cooling fans.

Module HDD Rack

Maximum Compatibility
Expansion Card length: 410mm / CPU cooler height: 160mm / PSU length: 210mm.

Support Liquid cooling kit and Fan
Radiator (120mm x 120mm or 120mm x 240mm or 120mm x 360mm) or 120mm Fan.

- Case Stand.
- USB3.0.
- Vented PCI Bracket.
- Air filter (bottom).
- Cable holes.
- Air filter(Top).

Thermal Flow
Intake the cool air through the front two 120mm fans, and exhaust the hot air out by the rear 120mm fan.

New Tool-less HDD Tray System
Hard disk installation is quick and easy.
Supports four 3.5” or 2.5” HDDs.
The HDD tray can be removed to make more room for high-end graphics cards.

Compatibility
Graphics card length: 250mm – 370mm(Max) / PSU length: 270mm / CPU cooler height:170mm /
Radiator:(Front)120mm x 240mm x 60mm / Cable Management Space: 14mm~27mm

The ability to convert a 2.5” SSD/HDD to 3.5” Standard HDD form factor and to turn it into a USB 3.0 enclosure is the latest addition to the Storage Accessories. This new 2.5” to 3.5” SATA SSD/HDD Converter with USB 3.0 is designed with Aluminum and Steel Alloy casing for heat dissipation, this versatile converter emulates the same Standard 3.5” HDD size, SATA connection and pass thru design for the fastest 6Gbps speed possible for any 2.5” SSD/HDD place into the converter. The connector on the converter use a Patent NSS connector design to support many cycles of hot swap (50,000), thus keeping the hard drive safe and in a durable environment. In addition, when it is connected via a USB 3.0 cable, it turns into a USB 3.0 enclosure. The screw-less and tool-less designed converter makes it very easy to add and change drive on this 2.5” to 3.5” SATA SSD/HDD Converter with USB 3.0.