3mm hardboard available in the standard sizes: A5, A4, A3, A2, A1, A0

These are perfect for painting on a panel.

When extra strength is needed Velcro brand Heavy Duty Stick On provides just that. Incorporating a 50% stronger closure and weather resistant adhesive that can be used indoors and out, securing items such as large pictures, wall hangings, rugs, heavy torches and tools has never been so quick or easy. Holds up to 7kg per 50mm x 50mm square piece or 4kg per 45mm "giant" coin.

Corri-Cor Mark 3 is made with more rigid double corrugated board and has the added benefit of a water-resistant coating on the back to protect the artwork from moisture. Brown both sides with a waxed back. Corrugated board with brown kraft paper liner on both sides and a unique structure that makes it both lightweight and dependably rigid. Gently bowed to keep the artwork flat and buffered with calcium carbonate for a neutral pH value. Britannia Mounts are the exclusive manufacturers of Corri-Cor. The Corri-Cor branded board is the original and largest range of bowed backing boards. Corrugated boards with liners on both sides and a unique structure that makes them both lightweight and dependably rigid. Gently bowed to keep the artwork flat and buffered with calcium carbonate for a neutral pH Value.

When extra strength is needed Velcro brand Heavy Duty Stick On provides just that. Incorporating a 50% stronger closure and weather resistant adhesive that can be used indoors and out, securing items such as large pictures, wall hangings, rugs, heavy torches and tools has never been so quick or easy. Holds up to 7kg per 50mm x 50mm square piece or 4kg per 45mm "giant" coin.

Velcro stick on tape is an easy to use alternative to nails and screws. To use, clean and dry both surfaces. Cut tape to length. Peel backing paper and press firmly to surfaces. Allow adhesive 10 minutes to set (or longer for heavier items) before attaching hook and loop. The adhesive reaches maximum strength after 24 hours.

Strong brown craft/framing tape made in Japan. This high quality tape is non-slip, stackable and writable. Each roll contains 50m of tape. Available in 25mm, 38mm, 50mm and 75mm widths.

Velcro brand Stick On Coins are an easy to use alternative to pins, nails and screws and more convenient than messy glue and sticky tape as items can be fixed permanently or removed and interchanged in seconds. Colour: White Size: 16mm Quantity: 16

When extra strength is needed Velcro brand Heavy Duty Stick On provides just that. Incorporating a 50% stronger closure and weather resistant adhesive that can be used indoors and out, securing items such as large pictures, wall hangings, rugs, heavy torches and tools has never been so quick or easy. Holds up to 7kg per 50mm x 50mm square piece or 4kg per 45mm "giant" coin.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

JAS White Core Mount Boards are available in 60 x 80cm sheets in the following colours: Buff, Felt Gray, Pearl, Cape Cod, Pistachio, Chamois, Porcelain, Ultra White, Biscuit, Cream, Black, Soft White, Off White, Antique White, Polar White, Extra White.

Strong brown craft/framing tape made in Japan. This high quality tape is non-slip, stackable and writable. Each roll contains 50m of tape. Available in 25mm, 38mm, 50mm and 75mm widths.

Standard Brown Framers Tape 38mm x 50m

JAS White Core Mount Board is a 1. 5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1. 1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper. These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications. JAS White Core Mount Boards are available in 60 x 80cm sheets in the following colours: Buff, Felt Gray, Pearl, Cape Cod, Pistachio, Chamois, Porcelain, Ultra White, Biscuit, Cream, Black, Soft White, Off White, Antique White, Polar White, Extra White. This is a single sheet of JAS White Core Mount Board in the following colour: Antique white.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

JAS White Core Mount Boards are available in 60 x 80cm sheets in the following colours: Buff, Felt Gray, Pearl, Cape Cod, Pistachio, Chamois, Porcelain, Ultra White, Biscuit, Cream, Black, Soft White, Off White, Antique White, Polar White, Extra White.

When extra strength is needed Velcro brand Heavy Duty Stick On provides just that. Incorporating a 50% stronger closure and weather resistant adhesive that can be used indoors and out, securing items such as large pictures, wall hangings, rugs, heavy torches and tools has never been so quick or easy. Holds up to 7kg per 50mm x 50mm square piece or 4kg per 45mm "giant" coin.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

These pre-cut mount boards measure 24 x 30cm along the outer edge, with an aperture of 24 x 34 cm.

Velcro stick on tape is an easy to use alternative to nails and screws. To use, clean and dry both surfaces. Cut tape to length. Peel backing paper and press firmly to surfaces. Allow adhesive 10 minutes to set (or longer for heavier items) before attaching hook and loop. The adhesive reaches maximum strength after 24 hours.

The simplest way to hold a canvas in

place. Tap one end into the rebate of the moulding, do this with 4-

10 clips, drop the canvas in, bend over and tap the other end into

the back of the stretcher bar.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

These pre-cut mount boards measure 24 x 30cm along the outer edge, with an aperture of 20 x 30 cm.

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

JAS White Core Mount Boards are available in 60 x 80cm sheets in the following colours: Buff, Felt Gray, Pearl, Cape Cod, Pistachio, Chamois, Porcelain, Ultra White, Biscuit, Cream, Black, Soft White, Off White, Antique White, Polar White, Extra White.

Hanging and Framing Hardware : 2m Picture Wire : Brass : Holds 11kg Max

Velcro stick on squares are an easy to use alternative to nails and screws. To use, clean and dry both surfaces. Cut tape to length. Peel backing paper and press firmly to surfaces. Allow adhesive 10 minutes to set (or longer for heavier items) before attaching hook and loop. The adhesive reaches maximum strength after 24 hours. Colour: White Size: 25mm Quantity: 24

JAS White Core Mount Board is a 1.5mm thick acid-free mount board which weighs 850gsm. It consists of three layers: a 110gsm paper surface which is available in 16 colours; a 1.1mm thick, fully coated, bleached paperboard core which is acid free and which is considered sufficiently inert to be used in direct contact with documents; a backing layer of white chlorine- and acid-free cellulose paper.

These mountboards are not fully lightfast and should not be stored in direct sunlight, though they will display good colour-stability if stored out of direct sunlight. The front surface paper and the white paperboard core accords to ISO 6588, while the back paper accords to ISO9706. It is the back sheet, which is most fully in contact with the artwork, that has the highest archival specifications.

JAS White Core Mount Boards are available in 60 x 80cm sheets in the following colours: Buff, Felt Gray, Pearl, Cape Cod, Pistachio, Chamois, Porcelain, Ultra White, Biscuit, Cream, Black, Soft White, Off White, Antique White, Polar White, Extra White.

Velcro stick on tape is an easy to use alternative to nails and screws. To use, clean and dry both surfaces. Cut tape to length. Peel backing paper and press firmly to surfaces. Allow adhesive 10 minutes to set (or longer for heavier items) before attaching hook and loop. The adhesive reaches maximum strength after 24 hours.