DIY installation just plug the AC cord into the Eskom powered plug and connect the DC leads to the battery terminals (Red to the + Positive terminal and Black to the - Negative terminal. Features:
- Advanced circuit design, efficient conversion.
- The inverter is equipped with advanced anti-jamming technology to provide a slow start-up function with high and low voltage alarms and high and low voltage protection.
- Modified sine wave 220Vac output, USB output interface, and LED battery voltage display.
- DIY Installation - maintenance-free design ensures that the unit can run continuously.
- The soft-start circuit increases the output voltage step by step at startup in order to eliminate cold start failure and also has the instantaneous drop of the output voltage, with quick recovery to reduce the load on startup.
UPS = Uninterrupted Power Supply AS = Auto Switching ms = Milliseconds
When Eskom power is on, the inverter uses Eskom power, and the smart charger will charge and maintain the battery. When Eskom power is off, the inverter will automatically transfer to battery power (15ms) and will supply 220Vac until the drawdown depletes the battery to 10.5Vdc.
When Eskom Power is off the automatic switch (without delay or interruption 15ms) switches to battery inverter power UPS
TBD 1000Mas UPS function is a modified sine wave inverter that converts DC power to AC power for appliances, solar devices, and telecommunication equipment when there is no Eskom power. Its' high-speed built-in battery smart charger helps convert grid power into DC power for charging the batteries with the built-in 15 Amp smart charger; It works together with deep cycle batteries to provide uninterrupted power for a load of up to 1000 watts (1600va) continuous use with a peak load of 2000w. Its' output via a plug plus a low voltage USB 5v socket. Short circuit protection is added to its' standard design. The cool casing and inner fan also help improve performance.
1000w UPS modified auto-switching power transfer between Eskom and 12v battery storage in 10 milliseconds converting the output to 220Vac which is unnoticeable to most appliances
What's in the box
1 unit Inverter TBD-EZ Power system with in-built 15amp battery charger
2 Dc Power battery cables Red and Black (positive and negative)
AC power lead for battery charger and Eskom through power when available
Universal plug for connection to South African 3 pin socket 500w UPS modified auto-switching power transfer between Eskom and 12v battery storage in 10 milliseconds converting the output to 220Vac which is unnoticeable to most appliances
General
Warranty
Warranty: |
6 Months Limited
|
Package Contents
Package Contents: |
1 unit Inverter TBD500Mas8a Power system with in-built 8amp battery charger
•
2 Dc Power battery cables (positive and negative)Red & Black
•
AC power lead for battery charger and Eskom through power when vailable
•
Universal plug for connection to South African 3 pin socket
|
Physical Specification
Item Depth (mm): |
203
|
Item Height (mm): |
64
|
Item Width (mm): |
140
|
Weight (kg): |
1.2
|
Is the information for this product incomplete, wrong or inappropriate?
Let us know about it.
Does this product have an incorrect or missing image?
Send us a new image.
Is this product missing categories?
Add more categories.
Modfied sine wave Built-in AVR for voltage regulation
- Wide input voltage range: 90-280 VAC
- Battery 12/15DC
- Overload and short circuit protection
- LCD display Battery voltage
Specifications:
- MODEL: TBD 500 Mas 8a
- CAPACITY:844 VA / 500W
- POWER FACTOR: 0.7
- Input Voltage range 180-280VAC
Line Mode:
- Output Voltage 220v AC +/-5%
- Bypass mode: 0utput voltage same as Eskom input voltage
Battery Mode:
- Output Voltage 230Vac +/-5%
- Transfer Time 15ms typical
- Waveform Modified Sine-wave
Overload Capability:
- Bypass Mode (in VA and Watts) Load >110%+/-15% , alarm 5 mins then
fault
- Load >130% +/-15%, fault immediately.
- AVR Mode (in VA and Watts)at Input voltage More than 280v AC Load
>100%+/-15%, go to Batery mode
- AVR Mode (in VA and Watts)at Input voltage Less than AC Load
>60%+/-15%, go to Batery mode
- Battery Mode (in W) Load>110% +/-15%, overload alarm for 15s, and
then will switch to fault mode for 10s. Then unit will re-start for 5
times Load>120% +/-15% , fault & cut off O/P immediately.
Short Circuit Protection:
- Line Mode Breaker
- Battery Mode Current limit +Firmware Protection
Battery:
- Battery Voltage 12/15 VDC
- Acceptable Battery Type Rechargeable lead-acid battery, Deep
discharge battery (deep cycle)
- Polarity Reserve Protection Yes
- Charger 8 Amps Auto activated in Through-put mode
- BATTERY’S NOT INCLUDED
Charger:
- Constant Current Charger Voltage 14.8 VDC +/-2%
- Floating Charge Voltage 13.6 VDC +/-2%
- Maximum Charge Current 8A
- DC Start Voltage >10.5v DC
Environment:
- Operating Humidity 0 to 90% Relative Humidity(Non-condensing)
- Operating Temperature 0 degrees C to 40 degrees C
- Storage Temperature -15 degrees C to 50 degrees C
Review This Product
No reviews yet - be the first to create one!