SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your PS4 Console:

This skin will fit the PS4 Standard Console. (Will not fit the Pro or Slim console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected witha cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:

-Covers PS4 Bottom, Top & Sides
-Covers 2 x Controllers
-Thin and tough protects from minor scratches
-Easy, bubble-free installation and sticky free removal
-No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected witha cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your PS4 Console:

This skin will fit the PS4 Standard Console. (Will not fit the Pro or Slim console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected witha cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:

-Covers PS4 Bottom, Top & Sides
-Covers 2 x Controllers
-Thin and tough protects from minor scratches
-Easy, bubble-free installation and sticky free removal
-No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected witha cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your PS4 Slim Console:

This skin will fit the PS4 Slim Console. (Will not fit the Standard or Pro console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:

-Covers PS4 Bottom, Top & Sides
-Covers 2 x Controllers
-Thin and tough protects from minor scratches
-Easy, bubble-free installation and sticky free removal
-No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

T80 FERRARI 488 GTB EDITION

8:10 scale replica of the Ferrari 488GTB, officially licensed by Ferrari and PlayStation®4 , for total realism in all PlayStation®4 racing games supporting wheels.

REALISM AND AUTHENTICITY
 - 13 cm tall gear stick with knob
 - Realistic gear-shifting feel
 - Detachable knob
 - Compatible with real universal knobs (available in car tuning shops)
 - 2 shift-plates included: "H"-pattern (7+1) and Sequential (+/-)

STURDINESS AND PRECISION
 - 100% metal internal mechanism
 - 100% metal gear stick
 - 100% metal clamping system
 - H.E.A.R.T HallEffect AccuRate Technology
 - Precision that won’t decrease over time (contactless magnetic sensor)
 - No tact switch and no potentiometer (for unlimited product lifespan)
 
ADAPTABILITY AND COMFORT
 - Upgradable firmware, and internal memory with adjustable gear-shift travel to suit your driving style (software available for download on PC)
 - Adjustable resistance when shifting gears
 - Shift-plate position and rotation adjustable by 360°
 - Clamping system position and rotation adjustable by 360°
 - Optimized clamping for any support surface
 - Tables or shelves from 1 to 55 mm in thickness
 - Cockpits (built-in screw threads + removable clamping system)
 
VERSATILITY
 - Unique design allowing for 2 different driving styles
 - "H"-pattern (7+1)
 - Sequential (+/-)

USB and/or DIN connectivity
 - On PC: works with all racing wheels on the market
 - On PS3 and PS4: works with the T500RS, Ferrari F1 Wheel Integral T500, T300RS and T300 Ferrari GTE racing wheels
 - On Xbox One: works with the TX Racing Wheel

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your PS4 Slim Console:

This skin will fit the PS4 Slim Console. (Will not fit the Standard or Pro console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:

-Covers PS4 Bottom, Top & Sides
-Covers 2 x Controllers
-Thin and tough protects from minor scratches
-Easy, bubble-free installation and sticky free removal
-No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your PS4 Pro Console:

This skin will fit the PS4 Pro Console. (Will not fit the Standard or Slim console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:

-Covers PS4 Bottom, Top & Sides
-Covers 2 x Controllers
-Thin and tough protects from minor scratches
-Easy, bubble-free installation and sticky free removal
-No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your Xbox Console:

This skin will fit the Standard Xbox Console. (Will not fit the Xbox S or X console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:
• Covers complete console, two controllers and the Kinect
• Thin and tough protects from minor scratches
• Easy, bubble-free installation and sticky free removal
• No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

Multi-Axis Steering Wheel For PS5 Controller

For PS5 gamepad dedicated racing steering wheel

*Specially designed for PS5 racing games.

*Imitate the real racing steering wheel design, with accurate hole design, excellent workmanship, and easy installation.

*There are 4 suction cups at the bottom, which are easy to fix and can simulate a real racing steering wheel, which enhances the game experience and is good for playing.

*The steering wheel can also be used alone without fixing it to the bracket.

Raz Tech Has a wide range of High-Quality cellular and computer accessories (Glass screen protectors, Screen Protectors, Cases, Batteries, Earphones, Headphones, USB cables, Bluetooth keyboards) at competitive prices. We strive to provide accessories for every kind of device and brand sold in South Africa (Apple, Sony, Huawei, Samsung, HTC, Blackberry, LG).

What you see before you is the first of a new species; Stitch also known as Experiment 626. From the world of gaming and entertainment and best known for his leading role in Walt Disney’s Lilo & Stitch movies, fans will know Stitch’s only instinct is to destroy everything he touches. Crashlanding as part of our world-leading phone and controller holder collection Cable Guys, and continuing the abandonment of his evil programming, Stitch is here to support your gaming controller, mobile phone, or anything else you can fit into his hands. Stitch is not bad, Stitch fluffy.

PS4 Temperature Control Fan

Every good gamer knows that not only graphics and gameplay, but also sound effects play a role. These gaming headphones have earrings in the desired design, cover the ear enough, but are still compact. In addition, their closed design ensures flawless music isolation in your ears. Compared to similar models, they have a remarkably long 2.2m cable, which leads unidirectionally, into one earplug. Works with a 3.5 mm jack. An effective microphone is an integral part of the headphones.

BigBen PS4 Stereo Headset v3 - White also has a microphone!
Not only players will appreciate a solid microphone. The BigBen Interactive headset microphone guarantees uninterrupted connectivity with anyone, anywhere, on Skype, Teamspeak or any other chat. Its folding design does not interfere with the use of headphones just to listen to music.

The Vx4 Controllers For Playstation 4 Are Ergonomically Designed For Superb Comfort During Long Gaming Sessions. Featuring Quick-fire Triggers, Precision D-pad And Anti-slip Rubber Thumb Sticks.

10-in-1 Super Charging Dock with 2 cooling fans and 4 Controller Charging Stations

4. Powerful station to charge 2 controllers simultaneously for dual players. At the same time, the cooling fans dissipate heat from the main engine.

Features:

- Charging position keeps the unit steady while vertical with the controller charging function.
- 4-in-1 charging station and storage dock.
- Powerful station to charge up to 2 controllers simultaneously for dual players. Enhance the family fun gaming experience.
- Four 3.0 themes with powerful output to meet the need of game fanciers.
- High DC input through 2 charging cables.
- With 2 cooling fans to extend the life of your console.

Specifications:
-Compatible with: Playstation 4 (Only)
- Black color
- Product size: 36 * 18 * 3.5cm / 14.4 * 7.2 * 1.4in
- Package size: 38 * 19.5 * 4cm / 15.2 * 7.8 * 1.6in
- Package weight: approx. 590g / 20.81oz

Note:
- Do not modify and dismantle.
- Don't clean it up with the organic matter.
- Do not place any heavy objects on the product.
- Do not throw a drop or apply a strong shock to the product.

Raz Tech has a wide range of High-Quality cellular and computer accessories (Glass screen protectors, Screen Protectors, Cases, Batteries, Earphones, Headphones, USB cables, Bluetooth keyboards) at competitive prices. We strive to provide accessories for every kind of device and brand sold in South Africa (Apple, Sony, Huawei, Samsung, HTC, Blackberry, LG).

- Colour - Black
- Material- Plastic
- PS5 Twin Charging Dock - For PS5 Dual sense controllers
- LED Indication - Show Charge status
- Connection type - USB Type -C

DESIGNED FOR PS5 :
- This twin charging dock is made and optimized for the New Sony PS5 DualSense Wireless controllers, easy to use compatible accessory for the PlayStation 5.

LED STATUS INDICATORS :
-The LED icons will show the status of the charge to let you know when your PS5 controllers are fully charged.

EASY TO USE :
- Fully compatible with the PS5 as comes with a USB Type-C cable for fast charging. The product is all one piece so you don’t lose any parts.

COMFORTABLE SIMPLICITY :
- It's easy to use, just slot the PS5 controller in the dock when you’re not gaming then they will be charged automatically.

Raz Tech has a wide range of High-Quality cellular and computer accessories (Glass screen protectors, Screen Protectors, Cases, Batteries, Earphones, Headphones, USB cables, Bluetooth keyboards) at competitive prices. We strive to provide accessories for every kind of device and brand sold in South Africa (Apple, Sony, Huawei, Samsung, HTC, Blackberry, LG).

PS5 Charging Station Stand Fan with Dual Cooling Fan Controller Charger Console

For PS5 Vertical Cooling Fan Stand For Playstation 5 Digital Edition With 3 Axis Port Dual Controller Charging Station Charger For DualSense
Feature: For
PS5 Console Or For PS5 Console Digital Edition.
The included 3 USB ports can extend USB functionality and easy to use.
It includes two charging connectors for the DualSense controllers at the same time.
With charging indicator for charging the controller: red when charging, green when fully charged.
Includes two cooling fans. 3000RPM, with the power button, can quickly and effectively cool down the console.

Specifications:
Input: DC 2A
Output: 0.5-1A
Fan Speed: 3000RPM
Interface: 3 * USB Type-A for USB Devices, 2 * USB Type-C Connectors for DualSense Charging Controller
Application: for PS5 or for PS5 Digital Edition, For DualSense controllers

Note:
1. There might be slight size differences due to manual measurement, different measuring methods, and tools.
2. The picture may not reflect the actual color of the item due to the different photography lights, angles and screen displays.

For Playstation 5 handle silicone protective cover

- Soft Texture,
- Good Hand Feeling,
- Super Abrasion Resistance,
- All-Round Anti-Wear
- Anti-Slip and the operation will not be affected at all after installation dust-proof, Sweatproof, Anti-squeeze

Product features:

1. Made of high-quality silica gel material.
2. It has a good buffering effect when falling down carelessly, which can protect your handle from damage.
3. Soft texture, excellent feel.
4. Light weight, good skid resistance.

Raz Tech has a wide range of High-Quality Cellular, Computer accessories, and Gaming Accessories (Glass screen protectors, Screen Protectors, Cases, Batteries, Earphones, Headphones, USB cables, Bluetooth keyboard) at competitive prices. We strive to provide accessories for every kind of device and brand sold in South Africa (Apple, Sony, Huawei, Samsung, HTC, Blackberry, LG).

1. Tailor-made for the PS5 controller, super fit.

2. Made of a new type of transparent PC material, environmentally friendly, non-toxic, no harm to the human body, special materials make it impossible for dust to the surface

3. Using new material technology to make the crystal box as clean and clear as clear water, with clear visual effects and streamlined design, showing a different taste and style.
4. Suitable for protecting and storing PS5 controller

5. The highly flexible protective cover can be easily installed and removed.

6. The soft rubber material can make you feel handy.

7. Material: PC

1. Tailor-made for the PS5 controller, super fit.

2. Made of a new type of transparent PC material, environmentally friendly, non-toxic, no harm to the human body, special materials make it impossible for dust to the surface

3. Using new material technology to make the crystal box as clean and clear as clear water, with clear visual effects and streamlined design, showing a different taste and style.
4. Suitable for protecting and storing PS5 controller

5. The highly flexible protective cover can be easily installed and removed.

6. The soft rubber material can make you feel handy.

7. Material: PC

PS4 Bluetooth Adapter Playstation 4 Bluetooth Dongle



Features:

- Bluetooth V4.0 specification compliance and specially designed for Sony PS4 (PlayStation 4) to solve the wireless problem.

Enables your PS4(playstation 4) to wirelessly communicate with Bluetooth-enabled devices, like Bluetooth headphones, Bluetooth speakers, Bluetooth smartphone headsets and more.

Working distance up to 33 feet(10 meters) with no obstruction for PS4.

Easy to use, enable bluetooth capabilities on your PS4 by simply plugging this compact adapter into an available USB port on PS4.


Package include:

1 x Dongle

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your PS4 Slim Console:

This skin will fit the PS4 Slim Console. (Will not fit the Standard or Pro console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:

-Covers PS4 Bottom, Top & Sides
-Covers 2 x Controllers
-Thin and tough protects from minor scratches
-Easy, bubble-free installation and sticky free removal
-No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

Functions:
- Bluetooth Wireless Gamepad with all function For PS4
- Connecting Tech: Wireless
- Cover Range: 8m to 10m (30 Feet)
- Interface: USB
- Plug-and-Play: Yes
- Ergonomic Engineering: Yes
- Vibration: Dual-Motor Vibration
- Compatible System: PC/PS4/Android

Raz Tech has a wide range of High-Quality cellular and computer accessories (Glass screen protectors, Screen Protectors, Cases, Batteries, Earphones, Headphones, USB cables, Bluetooth keyboards) at competitive prices. We strive to provide accessories for every kind of device and brand sold in South Africa (Apple, Sony, Huawei, Samsung, HTC, Blackberry, LG).

Functions:
- Bluetooth Wireless Gamepad with all function For PS4
- Connecting Tech: Wireless
- Cover Range: 8m to 10m (30 Feet)
- Interface: USB
- Plug-and-Play: Yes
- Ergonomic Engineering: Yes
- Vibration: Dual-Motor Vibration
- Compatible System: PC/PS4/Android

Raz Tech has a wide range of High-Quality cellular and computer accessories (Glass screen protectors, Screen Protectors, Cases, Batteries, Earphones, Headphones, USB cables, Bluetooth keyboards) at competitive prices. We strive to provide accessories for every kind of device and brand sold in South Africa (Apple, Sony, Huawei, Samsung, HTC, Blackberry, LG).

Soft Silicone Gel Rubber Case Cover For Playstation 5 PS5 Controller Skin Protection Case For PS5 Slim Gamepad Controle

Features
- Personalize your controller and improve your gaming with the Assecure Pro silicone skin for the PS5 controller.
- Gain extra grip and improve your gameplay with this nonslip silicone controller cover.
- The skin perfectly fits the controller keeping all the buttons, triggers, and thumbsticks accessible.
- Premium quality soft silicone material provides a more comfortable experience and can allow you to play for longer.
- Ribbed handle areas ensure your will not lose your grip at that critical moment.
- Simple to fit and remove as required, you will wonder how you ever played without it.

Raz Tech has a wide range of High-Quality Cellular, Computer accessories, and Gaming Accessories (Glass screen protectors, Screen Protectors, Cases, Batteries, Earphones, Headphones, USB cables, Bluetooth keyboard) at competitive prices. We strive to provide accessories for every kind of device and brand sold in South Africa (Apple, Sony, Huawei, Samsung, HTC, Blackberry, LG).