The Ketogenic diet used to be considered a diet used only for extremely overweight patients and monitored closely by physicians. The diet is gaining traction worldwide. When following a low-carb, high-fat, moderate protein diet, the goal is more than weight loss and a healthy lifestyle but rather to reach ketosis.
Ketosis is a state during which the body reaches when it burns fat, instead of carbs, for fuel. KETOSCAN makes it easy for people doing keto to track ketosis with breath sensor technology, rather than resorting to more tedious and invasive methods like blood or urine testing.
KETOSCAN is FDA Class 1 Approved and enables you to monitor your Fat Metabolism and level of Ketosis while on a low carb, ketogenic or paleo diet.

Alcoscan AL6000 Lite is a hand held portable breathalyzer used to check breath alcohol concentration. The device houses a specialised flow-rate controller to ensure accuracy by testing a full litre of air exhaled from the lungs.

AL6000 Lite is suitable for both personal use and in small workplaces for random alcohol testing with limited daily to monthly alcohol testing.

Annual calibration is recommended.

Automated Entrance Breathalyser System Alcoscan EBS010 is a high speed industrial alcohol tester suitable for installation at gates, entrances to sites, turnstiles, refineries and at pedestrian entrance points or as a standalone voluntary alcohol tester.

EBS010 contains an Ethanol Specific Fuel Cell sensor and is capable of providing up to 12 tests per minute when installed as a standalone breathalyser but when fully integrated into access control provides on average up to 6 tests per minute.

The testing capability of the EBS010 upgraded sensor module has been proven to provide accurate test results at over 500,000 tests in a single calibration cycle and integrated access control timing intervals on average up to 10 seconds per transaction. The resultant maximum capability taking into account 1 in 50 positive test results operating 24 hours per day provides for up to 8640 tests per day. We however recommend a ratio of at least 1 X EBS010 Unit to every 250 to 500 persons entering a site to avoid bottle necks and ques at entrance points during shift changes.

A pass (0.00%) result allows access and a fail (0.01% or above) result prevents access.

Unlike all other entrance breathalysers available in the market, EBS010 contains an Easy-to-Change replaceable Sensor Module so that EBS010 remains permanently installed on-site when EBS010 sensors require re-calibration. Always order a spare EBS010 sensor to avoid any down-time on site when maintenance is required. On-site calibration is provided upon request.

Full Integration into Access Control Systems & or Installation and on-site servicing is available via our numerous Access Control partners throughout Sub-Saharan Africa.

Test Result outputs are provided by a 12V 1 sec pulse separate for Pass and Fail and by digital output over USB, RS232 & Serial available.

If a Dry Contact Relay OUTPUT for Pass and Fail is required an optional Relay Box is available. Any additional integration requirements can be provided upon request.

Annual calibration of EBS010 sensors is recommended as calibration certificates provide for a 12 month calibration validity.

iBlow10 is a high speed alcohol breathalyser screener for testing drivers at road blocks & workers entering industrial sites.

iBlow10 has a SuraCell Fuel Cell Sensor for ethanol specific alcohol testing which provides a long calibration cycle of 1 year.

Digital Display of Results as well as GREEN or RED bright LED display based on a PASS or FAIL when any alcohol is detected in breath OR based on a pre-set PASS / FAIL Limit depending on whether iBlow10 is ordered for Industrial Use (0.01%BAC) or Law-Enforcement Use 0.24Mg/l BrAC.

iBlow10 provides 12 tests p/minute without the use of mouth pieces & offers Active and Passive testing for when drivers or workers have difficulty exhaling.

LEDs for Night Time use providing RED, BLUE and BLUE ONLY options to direct drivers.

Includes a link to free downloadable PC software to download breathalyser test data (5000 tests) from iBlow10 Memory to a PC for analysis and record keeping.

AlcoScan AL6000 Professional is a high quality hand held, portable alcohol tester.

AL6000 Professional uses a specialised flow-rate controller which allows for two modes of testing:
- NORMAL MODE testing requires a mouthpiece and a full litre of air to be blown to calculate a result.
- FAST MODE testing to quickly test a number of persons in quick succession without using a mouthpiece and without a full litre of air being required.

AL6000 Professional is suitable for both personal use and in small workplaces for random alcohol testing with limited daily to monthly alcohol testing.

Annual calibration / Sensor replacement is recommended.

Alcoscan AL7000 is a Premium hand held, portable digital alcohol tester.

This unit is suitable for personal use, in small workplaces and on the move for limited daily to weekly alcohol testing.

The AL7000 sensor can be changed very easily and the unit doesn't need to be returned to us for calibration. Pre-calibrated sensors can simply be sent to your location. Clip out the old sensor and clip in the new sensor.

Annual calibration / Sensor replacement is recommended.

Alcoscan ALP1 BT for Industry and Law-Enforcement is a fully portable Ethanol Specific Fuel-Cell Sensor Breathalyser which operates in Passive no-mouthpiece FAST mode for quick road side or entry point screening and Active Normal Mode using a mouthpiece to obtain a digital and printed test result for use in disciplinary hearings, CCMA cases and labour procedures as evidence.

The ALP1 BT Full Pack including Printer is Bluetooth enabled and includes a mobile battery operated Folio Printer which prints results immediately upon testing. In addition ALP1 BT stores 500 breathalyser test results in Memory capturing individual results after each test for downloading and analysis on a PC with free PC software. An expandable memory option is available up to 20,000 Tests on an SD card.

ALP1 meets the EN Standard - EN 15964:2011 for Breath alcohol test devices other than single use devices and has an SABS conformance report available for confirmation.

Provides for both FAST passive no mouthpiece testing and NORMAL active mouthpiece testing.

Memory of test results is password protected and includes date and time of each test.

Includes: Aluminium Carry Case, Free PC Software, Cables, Batteries, Access to our Free Bluetooth Android iSober App for capturing and sharing breathalyser test results.

ALP-1 BT is one of our three breathalyser models that functions with our iSober App & Cloud Service for Enterprise Users. iSober App is available free on both the App Store and Google Play Store.

Annual or bi-annual re-calibration is recommended depending on your company policy or legislative regulation in force.

Alcoscan ALP1 BT for Industry and Law-Enforcement is a fully portable Ethanol Specific Fuel-Cell Sensor Breathalyser which operates in Passive no-mouthpiece FAST mode for quick road side or entry point screening and Active Normal Mode using a mouthpiece to obtain a digital and printed test result for use in disciplinary hearings, CCMA cases and labour procedures as evidence.

The ALP1 BT stores 500 breathalyser test results in Memory capturing individual results after each test for downloading and analysis on a PC with free PC software. An expandable memory option is available up to 20,000 Tests on an SD card.

ALP1 meets the EN Standard - EN 15964:2011 for Breath alcohol test devices other than single use devices and has an SABS conformance report available for confirmation.

Provides for both FAST passive no mouthpiece testing and NORMAL active mouthpiece testing.

Memory of test results is password protected and includes date and time of each test.

Includes: Standard Protective Carry Case, Free PC Software, USB Cable, Batteries, Access to our Free Bluetooth Android iSober App for capturing and sharing breathalyser test results.

ALP-1 BT is one of our three breathalyser models that functions with our iSober App & Cloud Service for Enterprise Users. iSober App is available free on both the App Store and Google Play Store.

Annual or bi-annual re-calibration is recommended depending on your company policy or legislative regulation in force.

iBlow10 is a high speed alcohol breathalyser screener for testing drivers at road blocks & workers entering industrial sites.

iBlow10 has a SuraCell Fuel Cell Sensor for ethanol specific alcohol testing which provides a long calibration cycle of 1 year.

Digital Display of Results as well as GREEN or RED bright LED display based on a PASS or FAIL when any alcohol is detected in breath OR based on a pre-set PASS / FAIL Limit depending on whether iBlow10 is ordered for Industrial Use (0.01%BAC) or Law-Enforcement Use 0.24Mg/l BrAC.

iBlow10 provides 12 tests p/minute without the use of mouth pieces & offers Active and Passive testing for when drivers or workers have difficulty exhaling.

LEDs for Night Time use providing RED, BLUE and BLUE ONLY options to direct drivers.

Includes a link to free downloadable PC software to download breathalyser test data (5000 tests) from iBlow10 Memory to a PC for analysis and record keeping.

Alcoscan AL9000 including PC Software is a high quality hand held, portable Fuel Cell Sensor breathalyser used to check breath alcohol concentration with Law-Enforcement accuracy. AL9000PC interfaces with Windows based PCs via USB and is supplied with Microsoft Max 20 PC software and a USB cable for capturing, recording and printing results for each test.

Fuel Cell Sensor Technology provides the Law-Enforcement accuracy and a long calibration cycle.

This unit is suitable for use in the workplace.

Annual calibration is recommended.

Alcoscan AL1100F is a highly sensitive alcohol breathalyser screener for testing the breath of drivers and workers entering sites. The breathalyser has an Electro-Chemical Fuel Cell Sensor for ethanol specific alcohol testing and provides a long calibration cycle of 1 year before requiring calibration.

AL1100F permits approximately 12 tests per minute without the use of mouth pieces and provides both Active and Passive testing with Passive testing being effective when drivers or workers have difficulty exhaling.

Annual or bi-annual re-calibration is recommended depending on your company policy or legislative regulation in force.