APC Smart-UPS SRT Uninterruptible Power Supply (10000VA)(Uses the SRT192BP2 External Batteries)

Availability
 - Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault.
 - Scalable runtime Allows additional run time to be quickly added as needed.
 - Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging.
 - Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
 - Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.
 - Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.

Manageability
 - Network manageable Provides remote power management of the UPS over the network.
 - InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager.
 - SmartSlot Customize UPS capabilities with management cards.
 - LED status indicators Quickly understand unit and power status with visual indicators.
 - Serial connectivity Provides management of the UPS via a serial port.

Adaptability
 - Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
 - Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
 - Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP.

Serviceability
 - User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
 - Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.
 - Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement.
 - Disconnected battery notification Warns when a battery is not available to provide backup power.
 - Audible alarms Provides notification of changing utility power and UPS power conditions

Protection
 - Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
 - Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.
 - Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling.
 - Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used.
 - Cold-start capable Provides temporary battery power when the utility power is out.
 - Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse.
 - Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

General

Brand:	APC
Series:	Smart-UPS SRT
Categories:	Computers > Accessories > Power Protection and UPS > UPS Promotions > Loadshedding > UPS
LSN:	X50-GJD-9S5-2
Barcode:
Colour:	Black
Control Panel:	Multi-function LCD status and control console
Model Number:	SRT10KXLI
Topology:	Double Conversion Online
Type:	Uninterruptible power supply

Warranty

Warranty:	3 years • 2 years for battery
Warranty Type:	Repair or Replace

Output

Battery Backup Output:	1 x Hard Wire 3-wire (H N + G) • 6 x IEC 320 C13 • 4 x IEC 320 C19 • 3 x IEC Jumpers
Surge Protection Output:	Surge energy rating: 480 Joules
VA Rating:	10000 VA (10kVA)
Watts:	10000 W (10 kW)

Other Features

Bypass:

Internal Bypass (Automatic and Manual)

Battery

Battery Model:	Maintenance-free sealed Lead-Acid battery with suspended electrolyte • leakproof
Typical Battery Recharge Time:	1.5 Hours

Package Contents

Package Contents:

APC Smart-UPS SRT CD with software Documentation CD Installation guide Removable support feet Temperature Probe USB cable Warranty card

Physical Specification

Interface:	Contact Closure • RJ-45 10/100 Base-T • RJ-45 Serial • Smart-Slot • USB
Item Depth (mm):	715
Item Height (mm):	432
Item Width (mm):	263
Weight (kg):	111.82

Is the information for this product incomplete, wrong or inappropriate? Let us know about it.

Does this product have an incorrect or missing image? Send us a new image.

Is this product missing categories? Add more categories.

• LCD graphics display - Text and mimic diagrams that display modes of operation, system parameters and alarms.
• 10/100 BaseT Connection - Connect the device to a network using a 10 or 100 BaseT connection
• Green mode - Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
• Battery failure notification - Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Review This Product

No reviews yet - be the first to create one!