This Modeler's Side Cutter is designed for use with plastic parts and is ideal for scale models and Mini 4WD products assembly. The cutter's blades are made with hardened carbon steel and will remain sharp for a long period of time.

10mm wide thin masking tape. Can be used to mask off areas in both plastic models and Radio Control car polycarbonate body applications. Comes with dispenser for quick use.

This high quality brush with easy to use performance is made of fine horse hair from Chinese and American horses. Off-white coloured bristles with natural wood coloured handle and burgundy imprint, as well as plastic ferrule. This brush would better be used for painting detailed areas.

Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrene resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly, and can be blended easily. Prior to curing, paint can be washed away with plain water.

When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.

X designated colours have a glossy finish while XF designated colours are flat finish.
The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.

Tamiya Acrylic Model Paint paints are made from water-soluble Acrylic Model Paint resins and are excellent for either brush or spray painting. These paints can be used on styrol resins, styrofoam, wood, plus all the common model plastics. The paint covers well, flows smoothly with no blushing or fading, and can be blended easily. Each bottle contains 23ml.

Tamiya Acrylic Model Paint paints are made from water-soluble Acrylic Model Paint resins and are excellent for either brush or spray painting. These paints can be used on styrol resins, styrofoam, wood, plus all the common model plastics. The paint covers well, flows smoothly with no blushing or fading, and can be blended easily. Each bottle contains 23ml.

The Spray-Work Painting Stand Set makes airbrushing and spray painting so easy!

A multipurpose painting stand set with 2 easy to use stands. Both stands can be adjusted and used for a wide range of sized and shaped pieces. The 16cm diameter turntable has different sized holes to affix various parts to the stand. Parts can be painted easily while still on the sprue or can be affixed to something like a pencil or chopstick inserted into the larger holes. Comes with 4 spring clips. Fixing a model body to the stand from the inside, the body stand is perfect for spray painting 1/24 scale cars. The width of clips can also be adjusted to obtain the most stable hold.

Both body and turntable stands can be used with Tamiya's separately sold Painting Booth. By using these items, you can make your painting sessions not only easier by leaving your hands free, but also safer.

Basic Specifications:

- Comes with 4 spring clips.
- Size perfectly adapted for use with painting booth.

These spray paints are especially developed for finishing aircraft models to provide the authentic tones. Each can contains 100ml of paint. The paint is a synthetic lacquer that cures in a short period of time

Tamiya spray paints are not affected by acrylic or enamel paints. Therefore following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints.

Enamel paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic.Each bottle contains 10ml of paint.

Tamiya Masking Tape is thin, very strong adhesive tape for modelling use. It even adheres well to uneven surfaces. It's ideal when sharp and crisp lines are required. This tape will not absorb paint colour, or leave unsightly marks, making it perfect for use with painted or unpainted scale plastic or radio control models.

Width 18mm
Length 18m

Tamiya Colour bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.
- Colours may vary slightly from Tamiya Colour Acrylics and Sprays with the same name.
- Bottle contents: 10ml

These cans of spray paint are extremely useful for painting large surfaces. The paint is a synthetic lacquer that cures in a short period of time. Each can contains 100ml of paint, which is enough to fully cover 2 or 3, 1/24 scale sized car bodies.

Tamiya spray paints are not affected by acrylic or enamel paints. Therefore following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints.

.

Tamiya acrylic paints are made from water-soluble acrylic resins and are excellent for either brush painting or air-brushing. These paints can be used on styrene resins, Styrofoam, wood, plus all of the common model plastics. The paint covers well, flows smoothly, and can be blended easily. Prior to curing, paint can be washed away with plain water.

When airbrushing make sure to use any of the following Tamiya thinners: 81020, 81030, 81040, 81520, 87077.

X designated colours have a glossy finish while XF designated colours are flat finish.
The paint can be thinned for airbrushing using Tamiya X-20A Acrylic thinner.
The paint can be also thinned for airbrushing using Tamiya Lacquer Thinner. Using Tamiya Lacquer Thinner will yield faster drying results and a harder finish.
For better paint brushing results use Tamiya Paint Retarder (87114) for a smoother brushstroke free finish.

Tamiya Acrylic Model Paint paints are made from water-soluble Acrylic Model Paint resins and are excellent for either brush or spray painting. These paints can be used on styrol resins, styrofoam, wood, plus all the common model plastics. The paint covers well, flows smoothly with no blushing or fading, and can be blended easily. Each bottle contains 23ml.

Features:
Extra thin cement is very useful for plastic model assembly as it can be flowed into areas like small gaps between plastic parts and does not leave marks when dried. This cement contains limonene extracted from citrus fruits which make it very safe to use with no unpleasant smells.
- The bottle's cap comes with a convenient brush.
- 1 bottle contains 40ml of cement.

Tamiya Acrylic Model Paint paints are made from water-soluble Acrylic Model Paint resins and are excellent for either brush or spray painting. These paints can be used on styrol resins, styrofoam, wood, plus all the common model plastics. The paint covers well, flows smoothly with no blushing or fading, and can be blended easily. Each bottle contains 23ml.

.

This high quality brush with easy to use performance is made of fine horse hair from Chinese and American horses. Off-white coloured bristles with natural wood coloured handle and burgundy imprint, as well as plastic ferrule. This brush would better be used for painting detailed areas.

Tamiya Colour bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.

- Colours may vary slightly from Tamiya Colour Acrylics and Sprays with the same name.
- Bottle contents: 10ml

Tamiya Panel Line enamel paints are ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted into the ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be cleaned up by using enamel thinner. (Bottle contains 40ml)

Examples of use:
Black is a general-purpose color and can be used for any type of model. Brown is great for military models as well as highlighting details on bright colors such as Yellow or Orange. Gray is perfect for White or Light Gray parts where Black may be too distinct.

Note:
Plastic parts may become brittle when using Tamiya Panel Line accent colors. Avoid using on movable parts and take care when applying to load-bearing areas. Apply over base coat of lacquer or acrylic paint. Accent Color paints may damage underlying base coat. Test before applying it onto the model. Take care when applying on flat base coat colors as Accent Color paints may permeate more readily.

These spray paints are especially developed for finishing aircraft models to provide the authentic tones. Each can contains 100ml of paint. The paint is a synthetic lacquer that cures in a short period of time

Tamiya spray paints are not affected by acrylic or enamel paints. Therefore following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints.

Revolutionary Light-Curing Putty to speed-up finishing time!
For any busy modeler
Putty cures rapidly once exposed to a direct light source.

Unbelievable curing time
The Light-Curing Putty will cure in approx. 1 minute when exposed to direct sunlight, or in approx. 2 minutes under fluorescent light (27W).

Easy to handle one-component putty
The Light-Curing Putty is a one-component putty so does not require any curing agent, realizing very easy usability. Consisting of a smooth paste property, the putty is easy to apply to all surfaces.

Does not shrink during curing
Compared to conventional polyester based putties, the Light-Curing Putty displays almost no shrinking when drying.

Realizes excellent workability after curing
After completely curing, the Light-Curing Putty realizes easy cutting, trimming and filing, ensuring to obtain a smooth surface.

Can be painted over with plastic paints
After curing, the Light-Curing Putty can be easily painted over with plastic paints.
*Original color: Yellow, Net: 34g
(aluminum tube)
The followings outline some points and tech-tips on the Light-Curing Putty in Q&A form.

Q : Will the Light-Curing Putty be cured under UV light?
A : No. The putty will be cured when exposed to sunlight or fluorescent light. So it does not require any special lighting device. It is not recommended to use any light device that generates high heat such as an incandescent lamp because it may cause air bubbles in the putty.

Q : Is it possible to apply the Light-Curing Putty thickly?
A : Yes. However, it is best to do this in separate layers. Apply the putty in layers of 2mm thickness, this makes sure the light can penetrate through to the bottom. By applying another 2mm layer of putty after the under layer has dried, you can obtain your desired thickness. Different types of putty can also be applied over the top of a layer of Light-Curing Putty.

Q : Will the Light-Curing Putty cure under standard room lights?
A : The Light-Curing Putty will not cure quickly under an indirect light source such as standard room lights. When working with the putty, avoid direct sunlight and turn off any lights focused on your working area. It is not recommended to cure the putty under room lights alone as the putty may not cure completely.

Q : What's the best way to store the Light-Curing Putty?
A : After once opening the tube, tighten the cap and store the tube in the light shielding bag (included with putty). Then store in a cool shaded area.

Q : Does the Light-Curing Putty affix to the surface securely?
A : Consisting of a smooth paste property, the putty easily affixes to most surfaces. To ensure the putty fixes securely, it is recommended to rough-up the surface in advance using sand paper (#180-#400).

Q : How hard will the Light-Curing Putty become after curing?
A : The putty retains a smooth finish even after completely drying, ensuring easy workability. It will harden slightly softer than usual plastic (polystyrene) parts.

Q : Any other cautions?
A : After the Light-Curing Putty dries, the surface may become slightly greasy. It can be easily removed by wiping off using a soft cloth moistened with Tamiya Lacquer Thinner with, or sanding down using Tamiya Finishing Abrasives.

Tamiya Acrylic Model Paint paints are made from water-soluble Acrylic Model Paint resins and are excellent for either brush or spray painting. These paints can be used on styrol resins, styrofoam, wood, plus all the common model plastics. The paint covers well, flows smoothly with no blushing or fading, and can be blended easily. Each bottle contains 23ml.