• Mild steel welding rods is the most commonly welded metal used in stick welding in construction and manufacturing. 6013 is a high titanic coated electrode

Carbon Dioxide Solid Wire Diameter 0.8mm ER70S-6.

• Solid wire is designed to be used with Carbon dioxide gas.
• Low spatter and less fumes.
• Able to achieve all positional welds including vertical down.
• General purpose copper coated solid mild steel wire for use in controlled environments and away from ambient weather factors.
• Surfaces must be well prepared for the best welding result.
• Fabrication use.

• Strike-Arc hardened steel chipping hammer
• It is easy to clean and remove slag from your welds with this straight head chipping hammer
• The hammer head includes both flat and spike sides
• The bullet proof spiral handle includes a hook, making it easy to store on any wall.

• Goat grain leather with extended cuff (goatskin)
• Uses include TIG welding and general handling
• Softer than pig leather.

• Genuine leather Yoke for protection of the shoulders and arms during welding.

• Strike-Arc Inverter Welder Cable Set
• Electrode Holder with 2M Cable & Earth Clamp with 1.5m Cable, 16mm Cables fitted with male dins connectors
• 140 - 200Amp

• Chrome Leather ankle spats worn over your safety footwear to protect it from radiant heat and welding splatter

• MIG power sources use a continuous solid wire for filler metal and require a shielding gas delivered from a pressurized gas bottle.
• Mild steel solid wires are usually plated with copper to prevent oxidation aid in electrical conductivity and help increase the life of the welding contact tip

• MIG power sources use a continuous solid wire for filler metal and require a shielding gas delivered from a pressurized gas bottle.
  
• Mild steel solid wires are usually plated with copper to prevent oxidation aid in electrical conductivity and help increase the life of the welding contact tip

• MIG power sources use a continuous solid wire for filler metal and require a shielding gas delivered from a pressurized gas bottle.
  
• Mild steel solid wires are usually plated with copper to prevent oxidation aid in electrical conductivity and help increase the life of the welding contact tip

• MIG power sources use a continuous solid wire for filler metal and require a shielding gas delivered from a pressurized gas bottle.
  
• Mild steel solid wires are usually plated with copper to prevent oxidation aid in electrical conductivity and help increase the life of the welding contact tip