Arts & Crafts > Fine Art Supplies > Varnishes
|
Not currently available
Eli-Chem Resins - TotalCast Clear Artwork Resin Kit (10kg) - Resin & Hardener
Loot Price: R12,759
Discovery Miles 127 590
|
|
Eli-Chem Resins - TotalCast Clear Artwork Resin Kit (10kg) - Resin & Hardener
Series: TotalCast
Supplier out of stock. If you add this item to your wish list we will let you know when it becomes available.
|
TotalCAST Resin is an optically clear, high-gloss, hybrid polymer resin
system which is especially suitable for the protection and decoration
of artwork, paintings or sculptures as it provides a tough coating with
good abrasion resistance. It is easy to use because it cures at ambient
temperatures and is self-levelling. The resin is non-flammable,
odour-free and has no solvent content. It is also free of volatile
organic compounds (VOCs), is non-toxic and has non-yellowing
properties. It is perfect for use on all art surfaces including canvas,
wood, MDF and photographs, and can be used over acrylic, oil,
watercolour and enamel paint.
This kit consists of 5kg of each component (Resin & Hardener).
The Mixing Ratio is 1 : 1
Please note, the mixing ratio must be accurately followed. It is not
possible to change the ratio. This would adversely affect the
mechanical properties of the resin and would lead to it not drying
properly. The mixture should be thoroughly stirred (mix for 3-4 mins)
to ensure full homogeneity. Polymer systems tend to heat up much faster
in a pot than as a thin film. Therefore mix only the necessary amount
usable within the given pot life.
General
Brand: |
Eli-Chem
|
Series: |
TotalCast |
Categories: |
Arts & Crafts >
Fine Art Supplies >
Varnishes
Arts & Crafts >
Crafts and Hobbies >
Craft Essentials >
Sealants, Resins & Varnishes
Arts & Crafts >
Crafts and Hobbies >
Resin Craft >
Resins, Catalysts & Compounds
|
LSN: |
XEW-P0R-AS5-5 |
Barcode: |
|
Colour: |
Clear
|
Use Instructions: |
The system can be applied by hand-pouring or by brush/roller. Mix to
the ratio of 1:1 (by volume or weight) until it is a uniform colour
& consistency (3-4 minutes is usually sufficient). Ensure your
piece is perfectly flat and level, otherwise the resin will run to the
lowest point and “pool” in the centre, leaving too little resin at the
corners.
On large canvas paintings you should tighten the canvas as much as
possible or place a board underneath to support it uniformly. Any
bubbles created by hand-mixing can be easily popped by using a sharp
object or by passing warm air over the surface of the resin (use a
blowtorch or a hairdryer on a low setting. Don't hold a blowtorch or
hairdryer closer than 30cm to your artwork, otherwise you risk creating
ripples and dimples in the resin finish.)
You will need to protect the piece from dust accumulation for at least
8-12hrs. You can do this by using a dust sheet or a box to cover the
piece.
All mixing containers and tools can be cleaned with Acetone or
cellulose thinners.
|
Package Contents
Package Contents: |
1 x 5kg Bottle of Resin
•
1 x 5kg Bottle of Hardener
|
Physical Specification
Is the information for this product incomplete, wrong or inappropriate?
Let us know about it.
Does this product have an incorrect or missing image?
Send us a new image.
Is this product missing categories?
Add more categories.
- TotalCast Resin is an optically clear, high-gloss, hybrid
polymer resin system which is suitable for the protection and
decoration of artwork, paintings or sculptures.
- Provides a tough coating with good abrasion resistance
- Easy to use, cures at room temperatures and is
self-levelling
- For use on all surfaces including canvas, wood, MDF and
photographs
- Can be used over acrylic, oil, watercolour and enamel paint
- Resin is non-flammable, odour-free and has no solvent
content
Review This Product
No reviews yet - be the first to create one!
|
|
Email address subscribed successfully.
A activation email has been sent to you.
Please click the link in that email to activate your subscription.