High grade zinc spray (98% zinc content). Has a galvanizing action. Protects zinc and unprocessed iron and steel against corrosion. Due to its cathodic action, the spray is very economical and effective. Shiny finish. 400ml aerosol can.

Application:

Alu-Zinc Spray has a galvanizing effect that protects zinc and unprocessed iron or steel against corrosion. To be used for coachwork, gutter braces, weld joints and spot welding. Can be used on rust.

Soudal Filler Polyurethane Foam Genius 600ml. An all purpose, hand-held gap filling expanding PU Foam with patented "Genius Gun" application system. Reusable up to 6 weeks, the Genius Gun applicator enables high precision, single-handed use.
Ideally suited for the installation of doors and windows, the sealing of pipe penetrations and for the creation of sound-proof sealing.
Free of CFC's and HCFC's.
Very low emission value once fully cured.

Applications:
General all-purpose filling of holes, gaps and joints. Adheres to all common building materials, resistant to water, heat and ageing. Can be cut, sanded, plastered and painted after full cure.

Instructions:

Shake the can for at least 30 seconds before use. Open the cover and fold the tube horizontally. Hold the can upside down and extrude the foam. Gaps are to be filled by approximately 1/3. Repeat shaking regularly during application. If you have to work in layers repeat moistening after each layer. Application temperature: + 5°C - + 30°C. For storage: detach the bung, close nozzle with bung, close the cap and store can upright

Dishwashing liquid Xtra with fresh concentrated citrus is a biodegradable high-foaming neutral detergent used for the daily washing of dishes, glass, and cutlery and for the effective degreasing of pots, pans, and cooking utensils.

Application:
Diluted in water may be used for general cleaning applications. Dishwashing: Add 5ml-10ml of product into 10lt sink, hot water. Pot & Pans: Add 20ml of product into 10lt sink, hot water soak, and scrub. Rinse dishes, glass & cutlery with clean water prior to drying. Dilute in hot or cold water as desired to suit general cleaning applications.

Floor Stripper is an ammoniated floor polymer/wax stripper. Highly effective in removing polish build-up in preparation for re-sealing / coating. May be used as a heavy-duty floor & hard surface degreaser. Will effortlessly remove a variety of fats, oils, grease, food residue, and grime.

Application:

May be diluted in cold or lukewarm water and applied to the surface. Dilution will depend on the degree of buildup or time constraints. Allow a 5-minute contact time and scrub with a hard bristle brush or broom. Mop any residue up and expose of. Repeat if required. Ensure the surface is 100% clean and dry prior to applying polish. Heavy duty: Use neat. General Duty: 1:25 parts water.

Caution: Corrosive compound, contains ammonia, wear an appropriate mask, eye protection & gloves. Ensure adequate ventilation or fresh air.

THE POWR RANGE OF WATERPROOFING PRODUCTS ARE IDEAL FOR THE HARSH SOUTH AFRICAN CLIMATE.

POWR now provides you with all your high quality, eco-friendly, waterproofing products under one trusted brand.

Introducing our dynamic waterproofing range – the ultimate solution to protect your surfaces against moisture, leaks, and water damage. Our range of high-performance waterproofing solutions include POWR Rubber Seal, POWR Bonding Liquid, POWR Membranes and POWR Waterproofing Tapes. They are specially formulated to provide a reliable barrier against the elements, keeping your walls, floors, and structures waterproof and pristine. POWR Waterproofing products that offer both a variety of functional solutions and easy application.



PERFORMANCE BENEFITS:
•Bonds to most construction materials
•Elongates 100% with 95% recovery - Highly stretchable and contracts to its original form.
•Withstands thermal cycling
•Puncture resistant
•Strong UV exposure
•Withstands exposure to industrial chemicals
•Improves lifespan of coated substrates.
•Corrosion control.
•Encapsulation (Asbestos).
•Environmentally Friendly and can be applied were rainwater is harvested.
•Waterproofing that can withstand ponding of water.
•Can be applied to all construction materials
•Spray, paint or roller applied.
•Total ambient temperature application - No heating or propane flame heating required.
•Seals joints and covers fine cracks

PRODUCT USES:

•For all roof types/structures including:
•Fibre cement roof sheets
•Cement roof tiles
•Chromadek
•Zinc Alum and AluZinc
•Exterior trims such as facias, gutters, window sills and cement garden pots

APPLICATION:
•Always Mix POWR Rubber Seal well before use.
•Make sure all substrates are completely clean, sound, dry, and free from any laitance (a white film that forms on the surface of drying concrete), fungus, grease, oil, or loose and flaking particles.
•Do not dilute POWR Rubber Seal (application ready)
•Apply two coats by brush or roller
•A third coat is recommended for coastal areas.
•Determined by the condition, allow approximately an hour drying time between coats.
•Touch dry time is approximately 2 hours in hot dry conditions (25°C)


POWR WATERPROOFING MEMBRANE APPLICATION:
•Apply a generous coat of POWR Rubber Seal.
•Press membrane into wet POWR Rubber Seal surface.
•Apply a generous coat of POWR Rubber Seal over membrane until covered and allow to dry for 90 minutes
•Apply a final coat of POWR Rubber Seal over coated surfaces.


GALVANIZED METAL ROOF SHEETING APPLICATION:
Wash all fungi-infested areas and cracks with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose flaking and powdery paint or surface laitance by pressure washing. Prime all rust-affected areas ( if any ) with Triple Red Rust Converter.



NEW METAL SURFACES:
Apply one coat of Anti Corrosion Metal Primer to entire surface and allow to dry for 2-3 hours before overcoating. The area must be overcoated within 24 hours to prevent a loss in adhesion. Apply two coats of POWR Rubber Seal (0.8kg - 1kg / m2)


WEATHERED METAL SURFACES:
Apply one coat of Anti Corrosion Metal Primer to entire surface and allow 2-3 hours drying time before overcoating. The area must be overcoated within 3 days to prevent a loss in adhesion. Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg / m2)


PROBLEMATIC METAL AND BITUMEN SURFACES:
An Acid Metal Etch Primer is advisable to use as a substitute for Anti Corrosion Metal Primer under the following circumstances: Where flaking of factory-coated metal sheeting is observed. Over areas that were coated with bituminous products apply Bitumen Barrier Primer.


METAL AND CHROMADECK ROOF SHEETING:
Wash all fungi-infested areas with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose flaking and powdery or surface laitance by pressure washing. Prime all rust-affected areas (if any) with Triple Red Rust Converter. Scour the entire surface with a scouring pad to promote adhesion of the subsequent coatings.
APPLICATION:
•Apply a coat of Anti Corrosion Metal Primer.
•Prime all areas (full primer) and allow to dry for +- 8 hours.
•Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg /m)


ASBESTOS, NUTEC ROOF SHEETING AND CEMENT TILES:
Wash all fungi-infested areas with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose, flaking and powdery or surface laitance by pressure washing. Prime all rust-affected areas (if any) with Triple Red Rust Converter.
Scour the entire surface with a scouring pad to promote adhesion of the subsequent coatings.
APPLICATION:
•Apply one coat of POWR Bonding Liquid to all areas (full primer), and allow to dry for +- 8 hours.
•Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg/m2)


COVERAGE:
•Coverage will vary depending on the substrates/surface porosity.
•Coverage must be between 0.8kg - 1kg / m2


MAINTENANCE COAT:
To ensure warranty a maintenance coat must be applied every 3 - 4 years

WHAT MAKES IT UNIQUE:
•Spray or brush applied at ambient temperature
•Cures into a seamless membrane
•Excellent Waterproofing
•Corrosion resistance
•Chemical resistance
•Encapsulation


ROOF COVER APPLICATION:
•Waterproofing
•Encapsulating
•Rust Prevention
•Rust Rehabilitation
•Chemical protection

ROOF SURFACES:
•Metal Sheeted Roofs
•Tiled Roofs
•Asbestos / Nutech Roofs
•Concrete Slab Roofs


CLEAN UP:
Clean equipment with warm, soapy water


TRANSPORTING PAINT:
It is important to make sure that your paint products are properly and safely secured upright when transporting them.


SAFETY PRECAUTIONS:
•Keep out of reach of children.
•Read the label before use
•Ensure good ventilation during application and drying.
•In case of skin contact, wash with soap and water or a recognized skin cleaner. Avoid contact with eyes - in case of contact, rinse your eyes immediately with plenty of water and seek medical advice if symptoms persist. If ingested, drink plenty of water/milk. Do not induce vomiting. Seek medical attention.
•Store in a closed container.
•Store in a well-ventilated place.
•Keep cool.
•Dispose of contents/containers by local regulations
•Refer to safety data sheets and technical data sheets for further information

THE POWR RANGE OF WATERPROOFING PRODUCTS ARE IDEAL FOR THE HARSH SOUTH AFRICAN CLIMATE.

POWR now provides you with all your high quality, eco-friendly, waterproofing products under one trusted brand.

Introducing our dynamic waterproofing range – the ultimate solution to protect your surfaces against moisture, leaks, and water damage. Our range of high-performance waterproofing solutions include POWR Rubber Seal, POWR Bonding Liquid, POWR Membranes and POWR Waterproofing Tapes. They are specially formulated to provide a reliable barrier against the elements, keeping your walls, floors, and structures waterproof and pristine. POWR Waterproofing products that offer both a variety of functional solutions and easy application.



PERFORMANCE BENEFITS:
•Bonds to most construction materials
•Elongates 100% with 95% recovery - Highly stretchable and contracts to its original form.
•Withstands thermal cycling
•Puncture resistant
•Strong UV exposure
•Withstands exposure to industrial chemicals
•Improves lifespan of coated substrates.
•Corrosion control.
•Encapsulation (Asbestos).
•Environmentally Friendly and can be applied were rainwater is harvested.
•Waterproofing that can withstand ponding of water.
•Can be applied to all construction materials
•Spray, paint or roller applied.
•Total ambient temperature application - No heating or propane flame heating required.
•Seals joints and covers fine cracks

PRODUCT USES:

•For all roof types/structures including:
•Fibre cement roof sheets
•Cement roof tiles
•Chromadek
•Zinc Alum and AluZinc
•Exterior trims such as facias, gutters, window sills and cement garden pots

APPLICATION:
•Always Mix POWR Rubber Seal well before use.
•Make sure all substrates are completely clean, sound, dry, and free from any laitance (a white film that forms on the surface of drying concrete), fungus, grease, oil, or loose and flaking particles.
•Do not dilute POWR Rubber Seal (application ready)
•Apply two coats by brush or roller
•A third coat is recommended for coastal areas.
•Determined by the condition, allow approximately an hour drying time between coats.
•Touch dry time is approximately 2 hours in hot dry conditions (25°C)


POWR WATERPROOFING MEMBRANE APPLICATION:
•Apply a generous coat of POWR Rubber Seal.
•Press membrane into wet POWR Rubber Seal surface.
•Apply a generous coat of POWR Rubber Seal over membrane until covered and allow to dry for 90 minutes
•Apply a final coat of POWR Rubber Seal over coated surfaces.


GALVANIZED METAL ROOF SHEETING APPLICATION:
Wash all fungi-infested areas and cracks with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose flaking and powdery paint or surface laitance by pressure washing. Prime all rust-affected areas ( if any ) with Triple Red Rust Converter.



NEW METAL SURFACES:
Apply one coat of Anti Corrosion Metal Primer to entire surface and allow to dry for 2-3 hours before overcoating. The area must be overcoated within 24 hours to prevent a loss in adhesion. Apply two coats of POWR Rubber Seal (0.8kg - 1kg / m2)


WEATHERED METAL SURFACES:
Apply one coat of Anti Corrosion Metal Primer to entire surface and allow 2-3 hours drying time before overcoating. The area must be overcoated within 3 days to prevent a loss in adhesion. Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg / m2)


PROBLEMATIC METAL AND BITUMEN SURFACES:
An Acid Metal Etch Primer is advisable to use as a substitute for Anti Corrosion Metal Primer under the following circumstances: Where flaking of factory-coated metal sheeting is observed. Over areas that were coated with bituminous products apply Bitumen Barrier Primer.


METAL AND CHROMADECK ROOF SHEETING:
Wash all fungi-infested areas with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose flaking and powdery or surface laitance by pressure washing. Prime all rust-affected areas (if any) with Triple Red Rust Converter. Scour the entire surface with a scouring pad to promote adhesion of the subsequent coatings.
APPLICATION:
•Apply a coat of Anti Corrosion Metal Primer.
•Prime all areas (full primer) and allow to dry for +- 8 hours.
•Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg /m)


ASBESTOS, NUTEC ROOF SHEETING AND CEMENT TILES:
Wash all fungi-infested areas with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose, flaking and powdery or surface laitance by pressure washing. Prime all rust-affected areas (if any) with Triple Red Rust Converter.
Scour the entire surface with a scouring pad to promote adhesion of the subsequent coatings.
APPLICATION:
•Apply one coat of POWR Bonding Liquid to all areas (full primer), and allow to dry for +- 8 hours.
•Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg/m2)


COVERAGE:
•Coverage will vary depending on the substrates/surface porosity.
•Coverage must be between 0.8kg - 1kg / m2


MAINTENANCE COAT:
To ensure warranty a maintenance coat must be applied every 3 - 4 years

WHAT MAKES IT UNIQUE:
•Spray or brush applied at ambient temperature
•Cures into a seamless membrane
•Excellent Waterproofing
•Corrosion resistance
•Chemical resistance
•Encapsulation


ROOF COVER APPLICATION:
•Waterproofing
•Encapsulating
•Rust Prevention
•Rust Rehabilitation
•Chemical protection

ROOF SURFACES:
•Metal Sheeted Roofs
•Tiled Roofs
•Asbestos / Nutech Roofs
•Concrete Slab Roofs


CLEAN UP:
Clean equipment with warm, soapy water


TRANSPORTING PAINT:
It is important to make sure that your paint products are properly and safely secured upright when transporting them.


SAFETY PRECAUTIONS:
•Keep out of reach of children.
•Read the label before use
•Ensure good ventilation during application and drying.
•In case of skin contact, wash with soap and water or a recognized skin cleaner. Avoid contact with eyes - in case of contact, rinse your eyes immediately with plenty of water and seek medical advice if symptoms persist. If ingested, drink plenty of water/milk. Do not induce vomiting. Seek medical attention.
•Store in a closed container.
•Store in a well-ventilated place.
•Keep cool.
•Dispose of contents/containers by local regulations
•Refer to safety data sheets and technical data sheets for further information

Soudal Universal Silicone Sealant is an acetic cure silicone for sealing and bonding in bathrooms and kitchens which contains a high-performance fungicide.
The product will seal and bond to most sanitary surfaces such as tiles, glazed surfaces, glass, enamel, aluminium, bricks, gypsum board, timber, ceramics, porcelain etc. Acetic cure silicones are not suitable for bathroom plastics. Cannot be painted.

Applications:
Highly suitable for sealing and bonding applications in bathrooms, showers and kitchens with long term exposure to moisture.

The Annular Hole Cutter TCT (14 x 35mm, Weld Shank 19.05mm) is a durable and efficient cutting tool designed for drilling precise, clean holes in metal and other hard materials. The 14mm diameter and 35mm cutting depth are perfect for creating medium-sized holes in applications like pipework, steel fabrication, or machinery. The TCT (Tungsten Carbide Tipped) cutting edges offer exceptional longevity and sharpness, even when drilling through tough materials. The Weld Shank (19.05mm) ensures a secure, vibration-reducing fit to the drill, improving stability and control for accurate, high-performance drilling. Ideal for professional and industrial use.

This product is a high-performance, multipurpose, self-adhesive interior and exterior polymer waterproofing tape for sealing wall joints, roof structures and so much more. POWR waterproofing tape is uv resistant and can withstand extreme temperatures and weather conditions. A Butyl/Polymer Tape featuring strong viscosity and simple construction, wear resistance and sun resistance.

Application
•Find the source of water leakage, usually caused by cracks or joints.
•Clean the surface.
•Cut tape to size and remove the release liner
•Apply tape to the surface and work out any air bubbles
•The roller can be used to firmly press the tape to the surface

Roof surfaces
•Metal Sheeted Roofs
•Tiled Roofs
•Asbestos / Nutech Roofs
•Concrete Slab Roofs

POWR RANGE OF WATERPROOFING PRODUCTS ARE IDEAL FOR THE HARSH SOUTH AFRICAN CLIMATE.
POWR now provides you with all your high quality eco-friendly waterproofing products under one trusted brand.
Our dynamic waterproofing range – the ultimate solution to protect your surfaces against moisture, leaks, and water damage. Our range of high-performance waterproof POWR Rubber Seal, POWR Bonding Liquid, POWR Membranes and POWR Waterproofing Tapes are specially formulated to provide a reliable barrier against the elements, keeping your walls, floors, and structures waterproof and pristine. POWR Waterproofing products that offer both a variety of functional solutions and easy application.

POWR waterproofing membranes are made of non woven, 100% polyester stitch bond fabric water-tight material, that lies on a surface to prevent water leaks or damages when used in conjunction with POWR Rubber Seal. This is to help strengthen the product in areas where it is mostly needed, such as joints, screws, flashings, knocks and valleys.

POWR RANGE OF WATERPROOFING PRODUCTS ARE IDEAL FOR THE HARSH SOUTH AFRICAN CLIMATE.

Our dynamic waterproofing range – the ultimate solution to protect your surfaces against moisture, leaks, and water damage. Our range of high-performance waterproof POWR Rubber Seal, POWR Bonding Liquid, POWR Membranes and POWR Waterproofing Tapes are specially formulated to provide a reliable barrier against the elements, keeping your walls, floors, and structures waterproof and pristine. POWR Waterproofing products offer both a variety of functional solutions and easy application.

POWR now provides you with all your high quality eco-friendly waterproofing products under one trusted brand.

Pine Gel Concentrate with virgin pine oil and active neutral cleaning detergent is a tried and tested universal household cleaner. With hundreds of cleaning applications in and around the house, this all-in-one cleaner with concentrated surfactant and intense pine odor will leave a long-lasting clean, and clinical smell.

Application:

Apply neat onto the surface and wipe with a soft clean cloth, or scrub, rinse and repeat if required. Dilute 50ml per litre for most general mopping, scrubbing, and wiping applications. The product may be used as a laundry soak. The product is compatible with most common hard surfaces. Daily use and cleaning applications.

One & Only Original Grit Heavy Duty Hand Cleaner is a waterless hand cleaner with grit
as a soluble scrubber. A Water / solvent-based combination, mechanical hand cleaner with grit and essential oils

Applications and Method:
Heavy duty cleaner which is easy to use. It contains water softeners, cleaning surfactants, and other natural ingredients to help clean and protect your skin. The combination of degreasing additives will effortlessly and effectively remove most types of oils, grease, dirt, and common grime from your hands. This product will work effortlessly using hot or cold water and soft or hard pressure.

Soudal Sealant Fix All Crystal Clear 290ml Cartridge for all bonding and sealing applications both inside and outside where transparency is important.
100% crystal clear sealant, adhesive and filler, based on SMX Hybrid Polymer technology. Suitable for internal and external use. Can be applied in all weather conditions. Primerless adhesion on most construction materials, including wet and damp surfaces. Contains XS1 fungicides providing ultimate mould resistance.

Soudal Fix All High Tack Invisible 290ML is a high strength flexible adhesive which combines very high end strength with high initial tack. The product is 100% transparent and can be applied both outside and inside. It can be painted and used in sanitary areas.

Applications:
For bonding applications both inside and outside where a transparent product is needed and where initial grab and high end strength is important. Can be used on humid substrates.

THE POWR RANGE OF WATERPROOFING PRODUCTS ARE IDEAL FOR THE HARSH SOUTH AFRICAN CLIMATE.

POWR now provides you with all your high quality, eco-friendly, waterproofing products under one trusted brand.

Introducing our dynamic waterproofing range – the ultimate solution to protect your surfaces against moisture, leaks, and water damage. Our range of high-performance waterproofing solutions include POWR Rubber Seal, POWR Bonding Liquid, POWR Membranes and POWR Waterproofing Tapes. They are specially formulated to provide a reliable barrier against the elements, keeping your walls, floors, and structures waterproof and pristine. POWR Waterproofing products that offer both a variety of functional solutions and easy application.



PERFORMANCE BENEFITS:
•Bonds to most construction materials
•Elongates 100% with 95% recovery - Highly stretchable and contracts to its original form.
•Withstands thermal cycling
•Puncture resistant
•Strong UV exposure
•Withstands exposure to industrial chemicals
•Improves lifespan of coated substrates.
•Corrosion control.
•Encapsulation (Asbestos).
•Environmentally Friendly and can be applied were rainwater is harvested.
•Waterproofing that can withstand ponding of water.
•Can be applied to all construction materials
•Spray, paint or roller applied.
•Total ambient temperature application - No heating or propane flame heating required.
•Seals joints and covers fine cracks

PRODUCT USES:

•For all roof types/structures including:
•Fibre cement roof sheets
•Cement roof tiles
•Chromadek
•Zinc Alum and AluZinc
•Exterior trims such as facias, gutters, window sills and cement garden pots

APPLICATION:
•Always Mix POWR Rubber Seal well before use.
•Make sure all substrates are completely clean, sound, dry, and free from any laitance (a white film that forms on the surface of drying concrete), fungus, grease, oil, or loose and flaking particles.
•Do not dilute POWR Rubber Seal (application ready)
•Apply two coats by brush or roller
•A third coat is recommended for coastal areas.
•Determined by the condition, allow approximately an hour drying time between coats.
•Touch dry time is approximately 2 hours in hot dry conditions (25°C)


POWR WATERPROOFING MEMBRANE APPLICATION:
•Apply a generous coat of POWR Rubber Seal.
•Press membrane into wet POWR Rubber Seal surface.
•Apply a generous coat of POWR Rubber Seal over membrane until covered and allow to dry for 90 minutes
•Apply a final coat of POWR Rubber Seal over coated surfaces.


GALVANIZED METAL ROOF SHEETING APPLICATION:
Wash all fungi-infested areas and cracks with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose flaking and powdery paint or surface laitance by pressure washing. Prime all rust-affected areas ( if any ) with Triple Red Rust Converter.



NEW METAL SURFACES:
Apply one coat of Anti Corrosion Metal Primer to entire surface and allow to dry for 2-3 hours before overcoating. The area must be overcoated within 24 hours to prevent a loss in adhesion. Apply two coats of POWR Rubber Seal (0.8kg - 1kg / m2)


WEATHERED METAL SURFACES:
Apply one coat of Anti Corrosion Metal Primer to entire surface and allow 2-3 hours drying time before overcoating. The area must be overcoated within 3 days to prevent a loss in adhesion. Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg / m2)


PROBLEMATIC METAL AND BITUMEN SURFACES:
An Acid Metal Etch Primer is advisable to use as a substitute for Anti Corrosion Metal Primer under the following circumstances: Where flaking of factory-coated metal sheeting is observed. Over areas that were coated with bituminous products apply Bitumen Barrier Primer.


METAL AND CHROMADECK ROOF SHEETING:
Wash all fungi-infested areas with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose flaking and powdery or surface laitance by pressure washing. Prime all rust-affected areas (if any) with Triple Red Rust Converter. Scour the entire surface with a scouring pad to promote adhesion of the subsequent coatings.
APPLICATION:
•Apply a coat of Anti Corrosion Metal Primer.
•Prime all areas (full primer) and allow to dry for +- 8 hours.
•Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg /m)


ASBESTOS, NUTEC ROOF SHEETING AND CEMENT TILES:
Wash all fungi-infested areas with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose, flaking and powdery or surface laitance by pressure washing. Prime all rust-affected areas (if any) with Triple Red Rust Converter.
Scour the entire surface with a scouring pad to promote adhesion of the subsequent coatings.
APPLICATION:
•Apply one coat of POWR Bonding Liquid to all areas (full primer), and allow to dry for +- 8 hours.
•Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg/m2)


COVERAGE:
•Coverage will vary depending on the substrates/surface porosity.
•Coverage must be between 0.8kg - 1kg / m2


MAINTENANCE COAT:
To ensure warranty a maintenance coat must be applied every 3 - 4 years

WHAT MAKES IT UNIQUE:
•Spray or brush applied at ambient temperature
•Cures into a seamless membrane
•Excellent Waterproofing
•Corrosion resistance
•Chemical resistance
•Encapsulation


ROOF COVER APPLICATION:
•Waterproofing
•Encapsulating
•Rust Prevention
•Rust Rehabilitation
•Chemical protection

ROOF SURFACES:
•Metal Sheeted Roofs
•Tiled Roofs
•Asbestos / Nutech Roofs
•Concrete Slab Roofs


CLEAN UP:
Clean equipment with warm, soapy water


TRANSPORTING PAINT:
It is important to make sure that your paint products are properly and safely secured upright when transporting them.


SAFETY PRECAUTIONS:
•Keep out of reach of children.
•Read the label before use
•Ensure good ventilation during application and drying.
•In case of skin contact, wash with soap and water or a recognized skin cleaner. Avoid contact with eyes - in case of contact, rinse your eyes immediately with plenty of water and seek medical advice if symptoms persist. If ingested, drink plenty of water/milk. Do not induce vomiting. Seek medical attention.
•Store in a closed container.
•Store in a well-ventilated place.
•Keep cool.
•Dispose of contents/containers by local regulations
•Refer to safety data sheets and technical data sheets for further information

The Brass Connector 1/2"F is a durable and reliable fitting designed for connecting 1/2" female threaded components in plumbing or fluid systems. Made from high-quality brass, this connector offers corrosion resistance, strength, and long-lasting performance. It provides a secure and leak-proof connection, making it ideal for use in a variety of applications, including water, air, and gas systems. Whether used in residential, commercial, or industrial projects, this brass connector ensures reliable and efficient performance, making it a great choice for both DIY and professional use.

Quick Release Adapter
Size: x 10mm
Weight (g): 10
Chrome vanadium
Square drive adapter with thumb button for easy release
Drop forge

Bulk Pack x 2 Kaufmann Glue Gun Hotmelt Adhesive

Kaufmann Tile Cutter 3 In 1 - 450mm

The Drill Bit HSS Standard 7.5mm is a set of 10 high-speed steel (HSS) drill bits, each with a 7.5mm diameter. These bits are designed for general-purpose drilling in a variety of materials, including wood, metal, and plastic. HSS construction ensures strength, heat resistance, and longevity, making them ideal for both light and heavy-duty applications. The set of 10 provides an economical and convenient option for users who require multiple bits for their projects.

Ammoniated cream with micro scrubs is an alkaline cleaning compound with active detergents and cleaning agents for daily hard surface washing & cleaning applications. Will remove tenacious grime from most hard surfaces including tiles and porcelain.

Application:

Diluted in water may be used as a general-purpose household and work surface cleaner. May be used neat or diluted in hot or cold water depending on the application type and/or soiling condition of the surface. Pour neat onto the surface and wipe with a soft clean cloth, rinse and repeat if required. Dilute 50ml per litre for general mopping, scrubbing, and wiping applications. The product is compatible with most common hard surfaces. To ensure compatibility always test first on an inconspicuous area.

The new formula paint remover is highly effective for removing a range of water and solvent-based paints from metal.

Applications:
Use as is. Paint on the surface and leave. Use a scraper to remove excess residue. A second application may be applied if required. Do not mix with water. Product information: Methylene chloride-based compound, harmful, corrosive, and dangerous if not used with caution or as directed. Effectively strips a range of water and solvent-based paints from metals including aluminum. Will effectively strip powder coating when used via immersion method. Suitable for removing varnish & enamel from wood & general water-based paints from paving and floors.

Soudal Chemical Anchor Ca 1400kg 280ml is a two-component anchoring resin for the pressure-free securing of anchoring rods, studs, reinforcing bars, threaded collars, profiles etc… in various solid and hollow materials, such as concrete, cracked concrete, solid brick, hollow brick, porous concrete, natural stone, plasterboard walls, etc..

Application area:
Securing of heavy loads in solid and hollow building materials. Pressure free anchoring even close to edges. Can be used as repair mortar.

The Safety Valve 3/8" Preset 10 Bar is a pressure relief device designed to protect systems from overpressure by automatically releasing excess pressure when it exceeds 10 bar. Featuring a 3/8-inch connection, it is commonly used in compressed air systems, boilers, and hydraulic applications. Made from durable materials, it ensures reliable performance and safety, preventing equipment damage and maintaining system stability.

Soudal Universal Silicone Sealant is an acetic cure silicone for sealing and bonding in bathrooms and kitchens which contains a high-performance fungicide.
The product will seal and bond to most sanitary surfaces such as tiles, glazed surfaces, glass, enamel, aluminium, bricks, gypsum board, timber, ceramics, porcelain etc. Acetic cure silicones are not suitable for bathroom plastics. Cannot be painted.

Applications:
Highly suitable for sealing and bonding applications in bathrooms, showers and kitchens with long term exposure to moisture.