Fantasy Moon are opaque, Alkyd oil-based colours that instantly show a stunning hammered effect and a pearlescent finish upon application. There are 18 colours available, all with a good lightfastness. Fantasy Moon colours are ready-to-use and mixable with each other and other paint ranges, such as Vitrail, Ceramic, Cerne Relief, Studio Acrylics and Gédéo resins. They can be applied with a brush in thin or thick coats. This provides a the opportunity to experiment widely on a variety of surfaces.

Fantasy Prisme are opaque, Alkyd oil-based colours that dry to reveal a stunning honeycomb effect and a pearlescent finish. The effect will become visible as the paint dries over the course of 5 to 10 minutes. There are 28 colours available, all with a good lightfastness.Fantasy Prisme colours are ready-to-use and mixable with each other and other paint ranges, such as Vitrail, Ceramic, Cerne Relief, Studio Acrylics and Gédéo resins. This provides a the opportunity to experiment widely on flat horizontal surfaces.

Eli-Glow Photoluminescent Pigments will release light for up to 8 hours in darkness and 'charge up' after only 30 minutes exposure to daylight. By day the powder crystals absorb UV light and after dark they release energy in the form of a long-lasting ambient glow. The technology behind the Eli-Glow pigments shows no sign of any reduction in the ability to rejuvenate daily. The long-lasting glow offers functional and decorative solutions, ranging from workplace and road safety to visual applications, art, sculpture and interior/exterior design. Eli-Glow is harmless, non-toxic, non-radioactive and non-hazardous.

The pigments will recharge themselves an infinite number of times and will last indefinitely. The pigments absorb radiant U.V energy from sunlight (or indoor lighting) and convert it into longer wavelengths in the visible spectrum, thereby emitting it as light with the sensation of colours. By day the pigment is a pale straw-coloured substance. When mixed in a ratio of 10-20% with a binder it becomes invisible and will not affect the optical clarity of your coating.

How do I use Eli-Glow Pigment Powder?

Mix the powder into any non-waterbased binder (Eli Glow TotalCast Resin., PVA glues, clear varnishes, acrylic paints, oil paints, enamel paints, solvent-based paints, concrete sealers, inks etc.)

The binder needs to be clear/transparent or light in colour so as to allow the passage of U.V light to activate the Eli-Glow crystals.

Mix 10-20% powder into your binder to achieve a general glow colour across the finished article. Alternatively the powder can be sprinkled/scattered in some areas to highlight in a line, spot or even trace a curved section.

Eli-Glow Photoluminescent Pigments will release light for up to 8 hours in darkness and 'charge up' after only 30 minutes exposure to daylight. By day the powder crystals absorb UV light and after dark they release energy in the form of a long-lasting ambient glow. The technology behind the Eli-Glow pigments shows no sign of any reduction in the ability to rejuvenate daily. The long-lasting glow offers functional and decorative solutions, ranging from workplace and road safety to visual applications, art, sculpture and interior/exterior design. Eli-Glow is harmless, non-toxic, non-radioactive and non-hazardous.

The pigments will recharge themselves an infinite number of times and will last indefinitely. The pigments absorb radiant U.V energy from sunlight (or indoor lighting) and convert it into longer wavelengths in the visible spectrum, thereby emitting it as light with the sensation of colours. By day the pigment is a pale straw-coloured substance. When mixed in a ratio of 10-20% with a binder it becomes invisible and will not affect the optical clarity of your coating.

How do I use Eli-Glow Pigment Powder?

Mix the powder into any non-waterbased binder (Eli Glow TotalCast Resin., PVA glues, clear varnishes, acrylic paints, oil paints, enamel paints, solvent-based paints, concrete sealers, inks etc.)

The binder needs to be clear/transparent or light in colour so as to allow the passage of U.V light to activate the Eli-Glow crystals.

Mix 10-20% powder into your binder to achieve a general glow colour across the finished article. Alternatively the powder can be sprinkled/scattered in some areas to highlight in a line, spot or even trace a curved section.

Eli-Glow Photoluminescent Pigments will release light for up to 8 hours in darkness and 'charge up' after only 30 minutes exposure to daylight. By day the powder crystals absorb UV light and after dark they release energy in the form of a long-lasting ambient glow. The technology behind the Eli-Glow pigments shows no sign of any reduction in the ability to rejuvenate daily. The long-lasting glow offers functional and decorative solutions, ranging from workplace and road safety to visual applications, art, sculpture and interior/exterior design. Eli-Glow is harmless, non-toxic, non-radioactive and non-hazardous.

The pigments will recharge themselves an infinite number of times and will last indefinitely. The pigments absorb radiant U.V energy from sunlight (or indoor lighting) and convert it into longer wavelengths in the visible spectrum, thereby emitting it as light with the sensation of colours. By day the pigment is a pale straw-coloured substance. When mixed in a ratio of 10-20% with a binder it becomes invisible and will not affect the optical clarity of your coating.

How do I use Eli-Glow Pigment Powder?

Mix the powder into any non-waterbased binder (Eli Glow TotalCast Resin., PVA glues, clear varnishes, acrylic paints, oil paints, enamel paints, solvent-based paints, concrete sealers, inks etc.)

The binder needs to be clear/transparent or light in colour so as to allow the passage of U.V light to activate the Eli-Glow crystals.

Mix 10-20% powder into your binder to achieve a general glow colour across the finished article. Alternatively the powder can be sprinkled/scattered in some areas to highlight in a line, spot or even trace a curved section.

Resi-METAL pre-polymer metallic pigments are solvent-free colour additives which can be used to colour most polymer resin systems (Epoxy, Polyester and Polyurethane) used within the arts, crafts, flooring and coating industries. Resi-METAL will crosslink with polymer binding resins.

Resi-METAL pre-polymer metallic pigments are solvent-free colour additives which can be used to colour most polymer resin systems (Epoxy, Polyester and Polyurethane) used within the arts, crafts, flooring and coating industries. Resi-METAL will crosslink with polymer binding resins.

Resi-METAL pre-polymer metallic pigments are solvent-free colour additives which can be used to colour most polymer resin systems (Epoxy, Polyester and Polyurethane) used within the arts, crafts, flooring and coating industries. Resi-METAL will crosslink with polymer binding resins.

Resi-METAL pre-polymer metallic pigments are solvent-free colour additives which can be used to colour most polymer resin systems (Epoxy, Polyester and Polyurethane) used within the arts, crafts, flooring and coating industries. Resi-METAL will crosslink with polymer binding resins.

Resi-TINT MAX is a range of high quality pre-polymer pigments. The heavy body paste consistency provides a rich colour effect with rapid and uniform dispersion into clear polymer resins.

Most of the colours have a BW lightfastness rating of 8. The exceptions are the Red Oxide and the Rutile Titanium Dioxide-derived colours (Titanium White, Classic Red, Rust Red and Pure Orange). These have a light fastness index of 6.

This range is designed to be added to MasterCast 1-2-1, totalCAST, Ultra-Cast xt, as well as Eli-Chem General Purpose and CER slow set clear casting resins. You can also use other brand clear casting resins.

Resi-TINT MAX is a range of high quality pre-polymer pigments. The heavy body paste consistency provides a rich colour effect with rapid and uniform dispersion into clear polymer resins.

Most of the colours have a BW lightfastness rating of 8. The exceptions are the Red Oxide and the Rutile Titanium Dioxide-derived colours (Titanium White, Classic Red, Rust Red and Pure Orange). These have a light fastness index of 6.

This range is designed to be added to MasterCast 1-2-1, totalCAST, Ultra-Cast xt, as well as Eli-Chem General Purpose and CER slow set clear casting resins. You can also use other brand clear casting resins.

Resi-TINT MAX is a range of high quality pre-polymer pigments. The heavy body paste consistency provides a rich colour effect with rapid and uniform dispersion into clear polymer resins.

Most of the colours have a BW lightfastness rating of 8. The exceptions are the Red Oxide and the Rutile Titanium Dioxide-derived colours (Titanium White, Classic Red, Rust Red and Pure Orange). These have a light fastness index of 6.

This range is designed to be added to MasterCast 1-2-1, totalCAST, Ultra-Cast xt, as well as Eli-Chem General Purpose and CER slow set clear casting resins. You can also use other brand clear casting resins.

Resi-TINT MAX is a range of high quality pre-polymer pigments. The heavy body paste consistency provides a rich colour effect with rapid and uniform dispersion into clear polymer resins.

Most of the colours have a BW lightfastness rating of 8. The exceptions are the Red Oxide and the Rutile Titanium Dioxide-derived colours (Titanium White, Classic Red, Rust Red and Pure Orange). These have a light fastness index of 6.

This range is designed to be added to MasterCast 1-2-1, totalCAST, Ultra-Cast xt, as well as Eli-Chem General Purpose and CER slow set clear casting resins. You can also use other brand clear casting resins.

Resi-TINT MAX is a range of high quality pre-polymer pigments. The heavy body paste consistency provides a rich colour effect with rapid and uniform dispersion into clear polymer resins.

Most of the colours have a BW lightfastness rating of 8. The exceptions are the Red Oxide and the Rutile Titanium Dioxide-derived colours (Titanium White, Classic Red, Rust Red and Pure Orange). These have a light fastness index of 6.

This range is designed to be added to MasterCast 1-2-1, totalCAST, Ultra-Cast xt, as well as Eli-Chem General Purpose and CER slow set clear casting resins. You can also use other brand clear casting resins.

Resi-TINT MAX is a range of high quality pre-polymer pigments. The heavy body paste consistency provides a rich colour effect with rapid and uniform dispersion into clear polymer resins.

Most of the colours have a BW lightfastness rating of 8. The exceptions are the Red Oxide and the Rutile Titanium Dioxide-derived colours (Titanium White, Classic Red, Rust Red and Pure Orange). These have a light fastness index of 6.

This range is designed to be added to MasterCast 1-2-1, totalCAST, Ultra-Cast xt, as well as Eli-Chem General Purpose and CER slow set clear casting resins. You can also use other brand clear casting resins.

Resi-TINT MAX is a range of high quality pre-polymer pigments. The heavy body paste consistency provides a rich colour effect with rapid and uniform dispersion into clear polymer resins.

Most of the colours have a BW lightfastness rating of 8. The exceptions are the Red Oxide and the Rutile Titanium Dioxide-derived colours (Titanium White, Classic Red, Rust Red and Pure Orange). These have a light fastness index of 6.

This range is designed to be added to MasterCast 1-2-1, totalCAST, Ultra-Cast xt, as well as Eli-Chem General Purpose and CER slow set clear casting resins. You can also use other brand clear casting resins.

Resi-TINT MAX is a range of high quality pre-polymer pigments. The heavy body paste consistency provides a rich colour effect with rapid and uniform dispersion into clear polymer resins.

Most of the colours have a BW lightfastness rating of 8. The exceptions are the Red Oxide and the Rutile Titanium Dioxide-derived colours (Titanium White, Classic Red, Rust Red and Pure Orange). These have a light fastness index of 6.

This range is designed to be added to MasterCast 1-2-1, totalCAST, Ultra-Cast xt, as well as Eli-Chem General Purpose and CER slow set clear casting resins. You can also use other brand clear casting resins.

Resi-TINT MAX is a range of high quality pre-polymer pigments. The heavy body paste consistency provides a rich colour effect with rapid and uniform dispersion into clear polymer resins.

Most of the colours have a BW lightfastness rating of 8. The exceptions are the Red Oxide and the Rutile Titanium Dioxide-derived colours (Titanium White, Classic Red, Rust Red and Pure Orange). These have a light fastness index of 6.

This range is designed to be added to MasterCast 1-2-1, totalCAST, Ultra-Cast xt, as well as Eli-Chem General Purpose and CER slow set clear casting resins. You can also use other brand clear casting resins.

Resi-TINT MAX is a range of high quality pre-polymer pigments. The heavy body paste consistency provides a rich colour effect with rapid and uniform dispersion into clear polymer resins.

Most of the colours have a BW lightfastness rating of 8. The exceptions are the Red Oxide and the Rutile Titanium Dioxide-derived colours (Titanium White, Classic Red, Rust Red and Pure Orange). These have a light fastness index of 6.

This range is designed to be added to MasterCast 1-2-1, totalCAST, Ultra-Cast xt, as well as Eli-Chem General Purpose and CER slow set clear casting resins. You can also use other brand clear casting resins.

Resi-TINT MAX is a range of high quality pre-polymer pigments. The heavy body paste consistency provides a rich colour effect with rapid and uniform dispersion into clear polymer resins.

Most of the colours have a BW lightfastness rating of 8. The exceptions are the Red Oxide and the Rutile Titanium Dioxide-derived colours (Titanium White, Classic Red, Rust Red and Pure Orange). These have a light fastness index of 6.

This range is designed to be added to MasterCast 1-2-1, totalCAST, Ultra-Cast xt, as well as Eli-Chem General Purpose and CER slow set clear casting resins. You can also use other brand clear casting resins.

Resi-TINT MAX is a range of high quality pre-polymer pigments. The heavy body paste consistency provides a rich colour effect with rapid and uniform dispersion into clear polymer resins.

Most of the colours have a BW lightfastness rating of 8. The exceptions are the Red Oxide and the Rutile Titanium Dioxide-derived colours (Titanium White, Classic Red, Rust Red and Pure Orange). These have a light fastness index of 6.

This range is designed to be added to MasterCast 1-2-1, totalCAST, Ultra-Cast xt, as well as Eli-Chem General Purpose and CER slow set clear casting resins. You can also use other brand clear casting resins.

Resi-TINT MAX is a range of high quality pre-polymer pigments. The heavy body paste consistency provides a rich colour effect with rapid and uniform dispersion into clear polymer resins.

Most of the colours have a BW lightfastness rating of 8. The exceptions are the Red Oxide and the Rutile Titanium Dioxide-derived colours (Titanium White, Classic Red, Rust Red and Pure Orange). These have a light fastness index of 6.

This range is designed to be added to MasterCast 1-2-1, totalCAST, Ultra-Cast xt, as well as Eli-Chem General Purpose and CER slow set clear casting resins. You can also use other brand clear casting resins.

Resi-TINT MAX is a range of high quality pre-polymer pigments. The heavy body paste consistency provides a rich colour effect with rapid and uniform dispersion into clear polymer resins.

Most of the colours have a BW lightfastness rating of 8. The exceptions are the Red Oxide and the Rutile Titanium Dioxide-derived colours (Titanium White, Classic Red, Rust Red and Pure Orange). These have a light fastness index of 6.

This range is designed to be added to MasterCast 1-2-1, totalCAST, Ultra-Cast xt, as well as Eli-Chem General Purpose and CER slow set clear casting resins. You can also use other brand clear casting resins.

Resi-TINT MAX is a range of high quality pre-polymer pigments. The heavy body paste consistency provides a rich colour effect with rapid and uniform dispersion into clear polymer resins.

Most of the colours have a BW lightfastness rating of 8. The exceptions are the Red Oxide and the Rutile Titanium Dioxide-derived colours (Titanium White, Classic Red, Rust Red and Pure Orange). These have a light fastness index of 6.

This range is designed to be added to MasterCast 1-2-1, totalCAST, Ultra-Cast xt, as well as Eli-Chem General Purpose and CER slow set clear casting resins. You can also use other brand clear casting resins.

Resi-TINT MAX is a range of high quality pre-polymer pigments. The heavy body paste consistency provides a rich colour effect with rapid and uniform dispersion into clear polymer resins.

Most of the colours have a BW lightfastness rating of 8. The exceptions are the Red Oxide and the Rutile Titanium Dioxide-derived colours (Titanium White, Classic Red, Rust Red and Pure Orange). These have a light fastness index of 6.

This range is designed to be added to MasterCast 1-2-1, totalCAST, Ultra-Cast xt, as well as Eli-Chem General Purpose and CER slow set clear casting resins. You can also use other brand clear casting resins.