Dala Construction glue is an acid free, non-toxic, liquid, white glue that is semi opaque when dry. It is a classroom favourite as it is value for money and lends itself to paper and cardstock projects.

- Ponal Wood Glue is suitable for DIY, hobby, craft and school projects.
- Dries faster, clearer and stronger

A ready to use wood glue for most kinds of woods, for assembling and repair jobs. The bonds produced are slightly flexible and have a clear glue line. Suitable for DIY, hobby, craft and school projects. Dries fast, clear and strong.

High quality, moisture resistant (EN 204 D2) white wood adhesive for internal use. Dries transparent. Stronger than wood. For bonding and laminating of practically all hard, soft and exotic types of wood.

Suitable for:
For moisture resistant joining and laminating of practically all hard, soft and exotic types of wood.
Well-fitting, non-load bearing wooden structures using, for example, finger joints, dovetail joints, mortise and tenon joints, dowels and springs.
Indoor applications such as doors and furniture in, for example, living rooms and offices.
Surface bonding wood, hard and softboard, chipboard, multiplex plywood, MDF, paper, cardboard and hardboard.
Laminating veneer and hard plastic sheet (HPL, Formica, Duropal, Resopal) on a wooden surface.

EN 204 D2: Interior spaces in which increased relative humidity occurs occasionally and for a short time, whereby the level of wood humidity remains below 18%.

Working conditions: The ambient temperature, the adhesive and the materials to be bonded should be no less than +5°C. Relative humidity of up to 65%. Level of wood humidity between 8% and 12%.
Surface requirements: The surfaces to be bonded need to be clean, dry and free of dust. Ensure a well-fitting joint.
Preliminary surface treatment: Degrease oily types of wood with thinner.

Tools: Fine-toothed glue spreader (1 mm), brush or roller, clamp or press.
Dilute: Dilute only with water.
Coverage: 2-4 m²/kg, applied on both sides, depending on the nature of the materials.

Directions For Use:
Apply the adhesive with a brush or some other tool in an even and thin layer on one or both parts.
Let penetrate for a few minutes, assemble the parts within 10 minutes and clamp or press for 4-15 minutes.
The desired pressure is 2-5 kg/cm².
Stains/residue: Remove adhesive residues immediately with water. Dry adhesive residue can only be removed mechanically.

Storage conditions: Close container properly and store in a dry, cool and frost-free place.

Dala Construction glue is an acid free, non-toxic, liquid, white glue that is semi opaque when dry. It is a classroom favourite as it is value for money and lends itself to paper and cardstock projects.

Dala Construction glue is an acid free, non-toxic, liquid, white glue that is semi opaque when dry. It is a classroom favourite as it is value for money and lends itself to paper and cardstock projects.

Dala Construction glue is an acid free, non-toxic, liquid, white glue that is semi opaque when dry. It is a classroom favourite as it is value for money and lends itself to paper and cardstock projects.