One of the most important routes to chaos is the chaotic intermittency. However, there are many cases that do not agree with the classical theoretical predictions. In this book, an extended theory for intermittency in one-dimensional maps is presented. A new general methodology to evaluate the reinjection probability density function (RPD) is developed in Chapters 5 to 8. The key of this formulation is the introduction of a new function, called M(x), which is used to calculate the RPD function. The function M(x) depends on two integrals. This characteristic reduces the influence on the statistical fluctuations in the data series. Also, the function M(x) is easy to evaluate from the data series, even for a small number of numerical or experimental data. As a result, a more general form for the RPD is found; where the classical theory based on uniform reinjection is recovered as a particular case. The characteristic exponent traditionally used to characterize the intermittency type, is now a function depending on the whole map, not just on the local map. Also, a new analytical approach to obtain the RPD from the mathematical expression of the map is presented. In this way all cases of non standard intermittencies are included in the same frame work. This methodology is extended to evaluate the noisy reinjection probability density function (NRPD), the noisy probability of the laminar length and the noisy characteristic relation. This is an important difference with respect to the classical approach based on the Fokker-Plank equation or Renormalization Group theory, where the noise effect was usually considered just on the local Poincare map. Finally, in Chapter 9, a new scheme to evaluate the RPD function using the Perron-Frobenius operator is developed. Along the book examples of applications are described, which have shown very good agreement with numerical computations.

Hard spheres and related objects (hard disks and mixtures of hard systems) are paradigmatic systems: indeed, they have served as a basis for the theoretical and numerical development of a number of fields, such as general liquids and fluids, amorphous solids, liquid crystals, colloids and granular matter, to name but a few. The present volume introduces and reviews some important basics and progress in the study of such systems. Their structure, thermodynamic properties, equations of state, as well as kinetic and transport properties are considered from different and complementary points of view. This book addresses graduate students, lecturers as well as researchers in statistical mechanics, physics of liquids, physical chemistry and chemical engineering.

This volume contains fourteen papers on mathematical problems of flow and transport through porous media presented at the conference held at Oberwolfach, June 21-27, 1992. Among the topics covered are miscible and immiscible displacement, groundwater contamination, reaction-diffusion instabilities and moving boundaries, random and fractal media, microstructure models, homogenization, spatial heterogeneties, inverse problems, degenerate equations. The papers deal with aspects of modelling, mathematical theory, numerical methods and applications in the engineering sciences.

Modern experiments and numerical simulations show that the long-known coherent structures in turbulence take the form of elongated vortex tubes and vortex sheets. The evolution of vortex tubes may result in spiral structures which can be associated with the spectral power laws of turbulence. The mutual stretching of skewed vortex tubes, when they are close to each other, causes rapid growth of vorticity. Whether this process may or may not lead to a finite-time singularity is one of the famous open problems of fluid dynamics.

This book contains the proceedings of the NATO ARW and IUTAM Symposium held in Zakopane, Poland, 2-7 September 2001. The papers presented, carefully reviewed by the International Scientific Committee, cover various aspects of the dynamics of vortex tubes and sheets and of their analogues in magnetohydrodynamics and in quantum turbulence. The book should be a useful reference for all researchers and students of modern fluid dynamics.

Althoughtheprinciplesofoperationofhelicalscrewmachines, ascompressors or expanders, have been well known for more than 100 years, it is only during the past 30 years that these machines have become widely used. The main reasons for the long period before they were adopted were their relatively poor e?ciency and the high cost of manufacturing their rotors. Two main developments led to a solution to these di?culties. The ?rst of these was the introduction of the asymmetric rotor pro?le in 1973. This reduced the bl- hole area, which was the main source of internal leakage by approximately 90%, and thereby raised the thermodynamic e?ciency of these machines, to roughly the same level as that of traditional reciprocating compressors. The second was the introduction of precise thread milling machine tools at - proximately the same time. This made it possible to manufacture items of complex shape, such as the rotors, both accurately and cheaply. From then on, as a result of their ever improving e?ciencies, high rel- bility and compact form, screw compressors have taken an increasing share of the compressor market, especially in the ?elds of compressed air production, and refrigeration and air conditioning, and today, a substantial proportion of compressors manufactured for industry are of this type. Despite, the now wide usage of screw compressors and the publication of many scienti?c papers on their development, only a handful of textbooks have been published to date, which give a rigorous exposition of the principles of their operation and none of these are in English

The "Turbulence and Interactions 2006" (TI2006) conference was held on the island of Porquerolles, France, May 29-June 2, 2006. The scientific sponsors of the conference were * Association Francaise de Mecanique, * CD-adapco, * DGA * Ecole Polytechnique Federale de Lausanne (EPFL), * ERCOFTAC : European Research Community on Flow, Turbulence and Combustion, * FLUENT, * The French Ministery of Foreign Affairs, * Laboratoire de Modelisation en Mecanique, Paris 6, * ONERA. The conference was a unique event. Never before have so many organisations concerned with turbulence works come together in one conference. As the title "Turbulence and Interactions" anticipated, the workshop was not run with parallel sessions but instead of one united gathering where people had strong interactions and discussions. Many of the 85 or so attendants were veterans of previous ERCOFTAC conferences. Some young researchers attended their very first int- national meeting. The organisers were fortunate in obtaining the presence of the following - vited speakers: N. Adams (TUM, Germany), C. Cambon (ECL, France), J.-P. Dussauge (Polytech Marseille, France), D.A. Gosman (Imperial College, UK), Y. Kaneda (Nagoya University, Japan), O. Simonin (IMFT, France), G. Tryggvason (WPI, USA), D. Veynante (ECP, France), F. Waleffe (University of Wisconsin, USA), Y.K. Zhou (University of California, USA). The topics covered by the 59 papers ranged from experimental results through theory to computations. The papers of the conference went through the usual - viewing process for two special issues of international journals : Computers and Fluids, and Flow, Turbulence and Combustion.

This book is dedicated to the recent developments in RET with the aim to explore polyatomic gas, dense gas and mixture of gases in non-equilibrium. In particular we present the theory of dense gases with 14 fields, which reduces to the Navier-Stokes Fourier classical theory in the parabolic limit. Molecular RET with an arbitrary number of field-variables for polyatomic gases is also discussed and the theory is proved to be perfectly compatible with the kinetic theory in which the distribution function depends on an extra variable that takes into account a molecule's internal degrees of freedom. Recent results on mixtures of gases with multi-temperature are presented together with a natural definition of the average temperature. The qualitative analysis and in particular, the existence of the global smooth solution and the convergence to equilibrium are also studied by taking into account the fact that the differential systems are symmetric hyperbolic. Applications to shock and sound waves are analyzed together with light scattering and heat conduction and the results are compared with experimental data. Rational extended thermodynamics (RET) is a thermodynamic theory that is applicable to non-equilibrium phenomena. It is described by differential hyperbolic systems of balance laws with local constitutive equations. As RET has been strictly related to the kinetic theory through the closure method of moment hierarchy associated to the Boltzmann equation, the applicability range of the theory has been restricted within rarefied monatomic gases. The book represents a valuable resource for applied mathematicians, physicists and engineers, offering powerful models for potential applications like satellites reentering the atmosphere, semiconductors and nano-scale phenomena.

Intended to provide an up-to-date overview of the field, this book is also likely to become a standard work of reference on the science of droplets. Beginning with the theoretical background important for droplet dynamics, it continues with a presentation of the various methods for generating single droplets and regular droplet systems. Also included is a detailed description of the experimental methods employed in droplet research. A special chapter is devoted to the various types of droplet interactions without phase transition. A separate chapter then treats many examples of the possible phase transition processes. The final part of the book gives a summary of important applications. With its comprehensive content, this book will be of interest to all scientists and lecturers concerned with two-phase flow, spray technology, heterogeneous combustion, and aerosol science.

This book describes novel microtechnologies and integration strategies for developing a new class of assay systems to retrieve desired health information from patients in real-time. The selection and integration of sensor components and operational parameters for developing point-of-care (POC) are also described in detail. The basics that govern the microfluidic regimen and the techniques and methods currently employed for fabricating microfluidic systems and integrating biosensors are thoroughly covered. This book also describes the application of microfluidics in the field of cell and molecular biology, single cell biology, disease diagnostics, as well as the commercially available systems that have been either introduced or have the potential of being used in research and development. This is an ideal book for aiding biologists in understanding the fundamentals and applications of microfluidics. This book also: Describes the preparatory methods for developing 3-dimensional microfluidic structures and their use for Lab-on-a-Chip design Explains the significance of miniaturization and integration of sensing components to develop wearable sensors for point-of-care (POC) Demonstrates the application of microfluidics to life sciences and analytical chemistry, including disease diagnostics and separations Motivates new ideas related to novel platforms, valving technology, miniaturized transduction methods, and device integration to develop next generation sequencing Discusses future prospects and challenges of the field of microfluidics in the areas of life sciences in general and diagnostics in particular

This volume collects the edited and reviewed contribution presented in the 7th iTi Conference in Bertinoro, covering fundamental and applied aspects in turbulence. In the spirit of the iTi conference, the volume is produced after the conference so that the authors had the opportunity to incorporate comments and discussions raised during the meeting. In the present book, the contributions have been structured according to the topics: I Theory II Wall bounded flows III Pipe flow IV Modelling V Experiments VII Miscellaneous topics

Magnetic control of the properties and the flow of liquids is a challenging field for basic research and for applications. This book is meant to be both an introduction to, and a state-of-the-art review of, this topic. Written in the form of a set of lectures and tutorial reviews, the book addresses the synthesis and characterization of magnetic fluids, their hydrodynamical description and their rheological properties. The book closes with an account of magnetic drug targeting.

This book is concerned with the prediction of thermodynamic and transport properties of gases and liquids. The prediction of such properties is essential for the solution of many problems encountered in chemical and process engineering as well as in other areas of science and technology. The book aims to present the best of those modern methods which are capable of practical application. It begins with basic scientific principles and formal results which are subsequently developed into practical methods of prediction. Numerous examples, supported by a suite of computer programmes, illustrate applications of the methods. The book is aimed primarily at the student market (for both undergraduate and taught postgraduate courses) but it will also be useful for those engaged in research and for chemical and process engineering professionals.

This book is concerned with the prediction of thermodynamic and transport properties of gases and liquids. The prediction of such properties is essential for the solution of many problems encountered in chemical and process engineering as well as in other areas of science and technology. The book aims to present the best of those modern methods which are capable of practical application. It begins with basic scientific principles and formal results which are subsequently developed into practical methods of prediction. Numerous examples, supported by a suite of computer programmes, illustrate applications of the methods. The book is aimed primarily at the student market (for both undergraduate and taught postgraduate courses) but it will also be useful for those engaged in research and for chemical and process engineering professionals.

What do combustion engines, fusion reactors, weather forecast, ocean ?ows, our sun, and stellar explosions in outer space have in common? Of course, the physics and the length and time scales are vastly di?erent in all cases, but it is alsowellknownthatinallofthem,onsomerelevantlengthscales,thematerial ?ows that govern the dynamical and/or secular evolution of the systems are chaotic and often unpredictable: they are said to be turbulent. In fact, the term "turbulence" is used for an enormous variety of p- nomena in very di?erent ?elds, including geophysics, astrophysics, and - gineering. Unfortunately, these communities do not talk to each other too often. Therefore, back in 2005, we organized a workshop on "Interdis- plinary Aspects of Turbulence" at the Ringberg Castle in the Bavarian Alps, to discuss topics such as the basic concepts of turbulence, the di?- ent approaches of modelling and simulations used in the various areas, and also possible tests. This workshop was a great success and the proceedings can be found on the Internet (www.mpa-garching.mpg.de/mpa/publications/ proceedings/proceedings-en.html) as well as pdf-?les of several of the talks presented (www.mpa-garching. mpg.de/hydro/Turbulence/).

This book gathers the proceedings of the Fifth Symposium on Hybrid RANS-LES Methods, which was held on March 19-21 in College Station, Texas, USA. The different chapters, written by leading experts, reports on the most recent developments in flow physics modelling, and gives a special emphasis to industrially relevant applications of hybrid RANS-LES methods and other turbulence-resolving modelling approaches. The book addresses academic researchers, graduate students, industrial engineers, as well as industrial R&D managers and consultants dealing with turbulence modelling, simulation and measurement, and with multidisciplinary applications of computational fluid dynamics (CFD), such as flow control, aero-acoustics, aero-elasticity and CFD-based multidisciplinary optimization. It discusses in particular advanced hybrid RANS-LES methods. Further topics include wall-modelled Large Eddy Simulation (WMLES) methods, embedded LES, and a comparison of the LES methods with both hybrid RANS-LES and URANS methods. Overall, the book provides readers with a snapshot on the state-of-the-art in CFD and turbulence modelling, with a special focus to hybrid RANS-LES methods and their industrial applications.

This volume contains the proceedings of the Summer Program on Nonlinear Conservation Laws and Applications held at the IMA on July 13--31, 2009. Hyperbolic conservation laws is a classical subject, which has experienced vigorous growth in recent years. The present collection provides a timely survey of the state of the art in this exciting field, and a comprehensive outlook on open problems. Contributions of more theoretical nature cover the following topics: global existence and uniqueness theory of one-dimensional systems, multidimensional conservation laws in several space variables and approximations of their solutions, mathematical analysis of fluid motion, stability and dynamics of viscous shock waves, singular limits for viscous systems, basic principles in the modeling of turbulent mixing, transonic flows past an obstacle and a fluid dynamic approach for isometric embedding in geometry, models of nonlinear elasticity, the Monge problem, and transport equations with rough coefficients. In addition, there are a number of papers devoted to applications. These include: models of blood flow, self-gravitating compressible fluids, granular flow, charge transport in fluids, and the modeling and control of traffic flow on networks.

Professor Fenner's definitive text is now back in print, with added corrections. It serves as an introduction to finite element methods for engineering undergraduates and other students at an equivalent level. Postgraduate and practising engineers will also find it useful if they are comparatively new to finite element methods.The main emphasis is on the simplest methods suitable for solving two-dimensional continuum mechanics problems, particularly those encountered in the fields of stress analysis, fluid mechanics and heat transfer. Complete FORTRAN programs are presented, described and discussed in detail, and several practical case studies serve to illustrate the methods developed in the book.Finite element methods are compared and contrasted with finite difference methods, and throughout the level of computer programming, continuum mechanics, numerical analysis, matrix algebra and other mathematics employed corresponds to that normally covered in undergraduate engineering courses.

This thesis represents the first systematic description of the two-phase flow problem. Two-phase flows of volatile fluids in confined geometries driven by an applied temperature gradient play an important role in a range of applications, including thermal management, such as heat pipes, thermosyphons, capillary pumped loops and other evaporative cooling devices. Previously, this problem has been addressed using a piecemeal approach that relied heavily on correlations and unproven assumptions, and the science and technology behind heat pipes have barely evolved in recent decades. The model introduced in this thesis, however, presents a comprehensive physically based description of both the liquid and the gas phase. The model has been implemented numerically and successfully validated against the available experimental data, and the numerical results are used to determine the key physical processes that control the heat and mass flow and describe the flow stability. One of the key contributions of this thesis work is the description of the role of noncondensables, such as air, on transport. In particular, it is shown that many of the assumptions used by current engineering models of evaporative cooling devices are based on experiments conducted at atmospheric pressures, and these assumptions break down partially or completely when most of the noncondensables are removed, requiring a new modeling approach presented in the thesis. Moreover, Numerical solutions are used to motivate and justify a simplified analytical description of transport in both the liquid and the gas layer, which can be used to describe flow stability and determine the critical Marangoni number and wavelength describing the onset of the convective pattern. As a result, the results presented in the thesis should be of interest both to engineers working in heat transfer and researchers interested in fluid dynamics and pattern formation.

This book is a collection of papers presented at a symposium held in honor of Sidney Leibovich. According all papers deal with mathematical or computational aspects of fluid dynamics applied mostly to atmospheric or oceanographic problems. All contributions are research papers having not only the specialist but also graduate students in mind.

The book introduces readers to and summarizes the current ideas and theories about the basic mechanisms for transport in chaotic flows. Typically no single paradigmatic approach exists as this topic is relevant for fields as diverse as plasma physics, geophysical flows and various branches of engineering. Accordingly, the dispersion of matter in chaotic or turbulent flows is analyzed from different perspectives. Partly based on lecture courses given by the author, this book addresses both graduate students and researchers in search of a high-level but approachable and broad introduction to the topic.