Product Code: DS-PK1-E-WE

Wireless keypad can connect to AX PRO for alarm control and operation. It can also notice alarm by indicator and buzzer.

Specifications:

• Brand: HIKVISION AX-PRO
• Power Consumption: Quiescent current: 180 uA Max current: 251mA Voltage: 1.5 VDC
• Battery type: Four AA batterie
• Operation humidity: 10% to 90% (No condensing)
• Operation temperature: -10 °C to +55 °C (-4 °F to +122 °F)

Product Code: DS-PSP1-WE

DS-PSP1-WE Wireless Smart Plug offers you a smart home solution to end users, you can connect any electrical devices to this plug, like heater/electric fan/table lamp. You can manually enable or disable the plug via APP/Keyfob/Keypad, also you can enbale or disable it automatically by linking to different system events, like Arm/Disarm, Time schedule, System Status. By using this device, you will have a chance to make your home more intelligent.

Specifications:

• Brand: HIKVISION AX-PRO
• Rated voltage: 100 ... 240 V AC, 50 / 60 Hz
• Maximal total load: 2300 W
• Operation temp: -10 °C ... 55 °C

• Wireless Panel ONLY
• 868MHz
• Up to 96 Wireless Zones
• Built-In LAN, WIFI and GPRS
• 5000 Event Log
• Motion detection up to 15 metres range+L15
• Detection angle: 90 degrees, 180 degrees rotatable
• Can be fitted with an extra camera
• 6 Years operation on supplied battery
• Extremely reliable motion detection thanks to built-in radar module
• Installation height 80cm ~ 120cm

Product Code: DS-PWA64-L-WE

AX PRO supports Wi-Fi, TCP/IP, and GPRS/3G/4G communication methods. It also supports Hik-ProConnect, Hik-Connect, Hik IP Receiver, Hik IP Receiver Pro and Hik-Central, which is applicable to the scenarios of market, store, house, factory, warehouse, office, etc

Specifications:

• Brand: HIKVISION AX-PRO
• Wireless type: 2-way wireless
• Wireless Sounders: 4 (2 Internal+2 External)
• Wi-Fi on board Supported
• SIM slot: Single (Micro SIM)
Power Supply: Built in power supply
• Operation temperature: -10 °C to +55 °C

The Centurion D10 Turbo SMART Sliding Gate Motor is a legendary high-volume performer for sliding gates up to 1000kg. The D10 Turbo SMART now offers you speed, security, endurance and reliability, quicker and easier than with any other gate motor in the D10's class, thanks to SMART technology and wireless connectivity. The intelligent choice in residential, commercial and industrial gate automation. Now with award-winning SMART technology and with its powerful 24V motor and die-cast aluminium gearbox, the D10 Turbo SMART sliding gate motor packs a potential punch, providing excellent security on sites ranging from residential properties, townhouse complexes, residential estates, busy office parks and warehouse facilities.

Specifications
Brand: Centurion
Model: D10 Turbo SMART
Compatible remotes: Nova 1 Button, 2 Button and 4 Button
Compatible backup batteries: Securi-Prod 12v 7.2Amp and Securi-Prod 12v 8Amp batteries
Compatible controller PCB: SmartX controller
Compatible antitheft bracket: D10 SMART Bracket
Compatible safety beams: Photon SMART wireless beams
Compatible rack: Steel rack
Input voltage: 90V - 240V AC ± 10% @ 50Hz *1
Current consumption (Mains): 250mA
Battery charger current output: 1.8A @ 27.4V ± 1%
Maximum number of operations per day: 750
Duty cycle - Mains present: 25%
Motor voltage: 24V DC
Motor power supply: Battery-driven (Standard Capacity - 2 x 12V 7.2Ah)
Current consumption (motor at rated load): 10A
Motor push force – starting: 24Kgf
Gate mass – maximum: 1000Kg
Gate length – maximum: 50m
Drive Pinion: 20T Module 4
Collision Sensing: Electronic
Operating temperature range: -15°C to +50°C
Onboard receiver type: Code-hopping multichannel receiver with selective add and delete
Receiver code storage capacity: 1500 Remote buttons
Receiver frequency: 433.92Mhz
Degree of protection: IP54

Instructions for use
• Refer to detailed installer manual.

Maintenance and care
• Ensure that the track is kept clear from stones, dirt or any obstruction. Gate brushes can be installed to assist in clearing the obstructions.
• Ensure that the Gate wheels V profile, Gate wheels U profile or Gateshox run freely.
• Manual override the motor and check that the gate runs freely without any obstruction.
• Check that the rack is properly secured to the gate and that it does not press down on the operator pinion at any point while opening or closing.
• Clean around the motor area to ensure that vegetation does not grow to close to the motor and pinion.
• Check that the key still opens and closes the camlock as well as the discuss lock for the Anti Theft bracket and lubricate if necessary.
• Inspect the inside of the motor by removing the cover and ensure that it is clear of any insects and dust.

Warnings and limitations
• All installations must be done by a suitable qualified technician.
• Under no circumstances may any of the components be modified.

The LCD display in the Druid range makes information on the status and performance of the energizer quick and easy to read. Using the Adaptive Power Technology (APT) pioneered by Nemtek, these energizers offer a unique technology to detect how much power a fence can accept and handle before it starts to arc and waste energy. This maximises the power on the fence and minimises false alarms.

The Centurion DX Smart Controller PCB is a replacement controller PCB for Centurion D5 SMART Motors as well as the Centurion D10 SMART and Centurion D10 Turbo SMART Motors. The controller does not have an LCD display and is controlled and set up using the App.

Specifications
Brand: Centurion
Controller for motor type: D5 SMART, D10 SMART and D10 Turbo SMART
Replacement unit: New

Warnings and limitations
• Installation must be done by a suitable qualified technician
• Under no circumstances may any of the components be modified

Commax 1 Button Gate station

Product Code: DS-PDPC12P-EG2-WE

PIRCAM is a fully supervised two-way wireless detector with built-in high quality camera which can provide an ideal solution for video verification via motion pictures transmitted to an ARC or to personal phones via APPs. Protect your premises day and night by viewing real-time images for fast and accurate response to real alarm events.

Specifications:

• Brand: HIKVISION AX-PRO
• Detection: Angle 85.9°
• Digital Temperature Compensation: Support
• Resolution : 640*480,320*240,160*12
• Transmission Method: Two-Way RF Wireless
• Transmission Frequency: 868MHz
• Power Supply: Battery Powered
• Typical Voltage: 3V
• Operation Temperature: -10 °C to 55 °C (14 °F to 131 °F)
• Storage Temperature: -20 °C to 60 °C (-4 °F to 140 °F)

The Motor Safe Anti Theft Bracket is compatible with the D3, D5 and D5 Evo Motors. The Anti Theft Bracket covers the entire motor and therefore secures the motor as well as the internal components. The Anti Theft Bracket comes with a 60mm discus padlock.

• Compatibility: Centurion D3, D5 and D5 Evo
• Material used: Electroplated Steel
• Lock: 60mm discus padlock

Manufacturer Code: 1010SU13A

The Centurion replacement Door with Lock And Keys are suitable for replacing old and damaged doors to protect against unauthorized access to your motor .

APPLICATIONS
Centurion D3 motor
Centurion D5 motor
Centurion D5 Evo motor

The D5 EVO is one of the best selling motors in the country. It has an intuitive setup, visual diagnostics, advanced timer functionality, battery backup to name few of a vast list of features.

The Wizord energizers have been field tested for many years and boast unsurpassed reliability. Simple to install and easy to maintain.

ET Drive 500 - Motor Only

The Merlin Stealth two-zone energizer is a powerful range that can be used for residential to high-end security needs and is a cost-effective solution where more than one zone is required. Separation of the fence into zones allows easy identification of the zone affected by fence faults or tampering. Smart design allows the maximum amount of energy to be transferred to the zone that needs it, yet the combined energy of the two zones will not exceed the legal maximum permitted. These energizers can be controlled by a tag and/or a keypad. The energizers can be programmed to offer customised solutions.

• IP rating: IPx4
• Operating temperatures: -10 Degrees Celcius to 50 Degrees Celsius
• Operating humidity: < 80% non-condensing
• Electrical supply voltage: 240V
• Typical power consumption (normal operating conditions): 27VA
• Standby time (fully charged battery): 6hrs
• Energy output 500 Ohms load 7.6 Joule
• Open circuit voltage 9 300V

Commax CDV-70H/DRC-4L Hands Free 7" Video Touch Button Intercom Kit


• Brand: Commax
• Power source: AC 100-240V, 50/60Hz
• Mount type: Surface-mounted
• Wiring: camera 4 wires/ Interphone - 4 wires
• DRC: 4L
• Embedded: LED (night working)
• Power source: DC 12V (FROM MONITOR)
• Image Sensor: Colour C-Mos
• Warranty: Refer to manufacturer warranty

Product Code: THEFTKIT06
The Theft Resistant Cage is compatible with the D3, D5 and D5 Evo Motors. The Anti Theft Bracket is designed to significantly reduce the risk of an intruder gaining access to the motor and internal components.

SPECIFICATIONS:
Brand: Centurion
Material used: Galvanised Steel
Integrated lock: 60mm discus padlock

The LCD display in the Druid range makes information on the status and performance of the energizer quick and easy to read. Using the Adaptive Power Technology (APT) pioneered by Nemtek, these energizers offer a unique technology to detect how much power a fence can accept and handle before it starts to arc and waste energy. This maximises the power on the fence and minimises false alarms.

The Wizard energizers have been field tested for many years and boast unsurpassed reliability. Simple to install and easy to maintain.

Product Code: DS-PDMC-EG2-WE

Wireless opening detector that notifies of first signs of room intrusion by means of a
broken door or window. It can be mounted on all types of doors including metal base and the onboard inputs will allow user to extend applications by wiring to different
wired sensors

Specifications:


• Brand: HIKVISION AX-PRO
• Power Switch: Power Up Enrolling
• Transmission Method: Two-Way RF Wireless
• Transmission Frequency: 868MHz
• Power Supply: Battery Powered
• Typical Voltage: 3V
• Operation Temperature: -10 °C to 55 °C (14 °F to 131 °F)
• Storage Temperature: -20 °C to 60 °C (-4 °F to 140 °F)
• Operation Humidity: 10% to 90%

Connecting wirelessly to your CENTURION SMΔRT solution, Photon SMART gives you an automated gate system that isn’t just safe, it’s intelligently safe. Photon SMART can be installed with ZERO wires.

• Brand: Centurion
• Power supply: 2 x AA Alkaline Batteries
• (supplied for each transmitter and receiver)
• Battery life: >2 years
• Battery-low indication: Notified via MyCentsys Pro
• Mobile Application
• Maximum operating distance: 30m
• Alignment between beams²: Automatic – 1m @ 10m
• Maximum Operating Distance
• Photon SMΔRT Receiver to SMΔRT
• Controller: 10m
• Operating temperature: -15°C to +65°C
• Operating humidity: 0 - 90° (non-condensing)
• Degree of Protection: IP54

Code-Hopping Encryption. Unique antenna design incorporating the keyring. increases operating range by 50%. Crystal frequency-controlled within +/- 100KHz. Frequencies available are 403.55MHz. 12V battery operation - GP23A Alkaline Cell. Typically 2 years battery life expected under normal use. LED flashes when there is a low battery condition. Rubber buttons are easy to press and click positively.

Product Code: TX4NV4433
The Centurion Nova V3 SG 4 Button remote on a 433MHz frequency uses code hopping technology to offer the ultimate security in a remote control. A unique randomly changing code is transmitted with each operation making it impossible to duplicate the system.

APPLICATIONS
• 1 Channel Centurion Nova receiver
• 2 Channel Centurion Nova receiver, 4 Channel Centurion Nova receiver
• Centurion Supa Nova multi user receiver
• Centurion D2 controller
• Centurion D5 Evo controller
• Centurion D5 Smart controller
• Centurion D10 controller
• Centurion Sector Traffic barrier
• Centurion G2 intercom system
• Centurion RDO
• Centurion Vantage controller
• Centurion Vert X controller
• Centurion Vector
• Centurion GDO XTrac

SPECIFICATIONS
Brand: Centurion
Coding:  Code hopping
Frequency: 433.92MHz
Buttons : 4 Button
Power source: GP23 12V Alkaline battery
Operating voltage: 12V DC
Min operating voltage: 5V DC
Operating current: 7mA
Transmit indication: White LED

INSTRUCTIONS FOR USE
• For detailed operation and programming guidelines consult the product manual

MAINTENANCE AND CARE
• When low battery voltage indicator flashes, replace battery
• Rotate the use of spare transmitters regularly so that it works if and when required
• Keep the spare transmitters safe to prevent unauthorized access
• Store in a clean and dry space
• Keep out of reach of children and pets

The i5 infrared gate beams are designed to provide optimum safety by detecting the presence of a person or vehicle traversing the path of a moving gate. The beams can be interfaced with most automation equipment. They can also be used to enhance the security of the automation by enabling the Intruder Detection Alarm function inherent in many of our later gate operator controllers, as well as external alarms and buzzers by means of either a normally-open or normally-closed potential-free contact

The i5 infrared beam consists of a transmitter and receiver unit mounted on opposite sides of an entrance. The transmitter sends a modulated infrared beam to the receiver module. When the beam is interrupted the receiver changes the state of an internal relay. The contacts of the relay are potential-free and can be wired as normally-open or normally-closed.

• Power supply: 12v - 30V DC/AC
• Power consumption: - Transmitter: 21mA
• Power consumption: - Receiver: 43mA @ 12V
• Maximum distance: 40m
• Alignment: Automatic: - 9m² @ 10m#
• Output contact rating: 5A @ 220V AC (non inductive)
• Operating temperature: -15°C to 55°C
• Operating humidity: 0% - 90% (non condensing)
• Degree of protection: IP54
• Warranty: 24 Month carry in Manufacturers warranty


MAINTENANCE
• Ensure that the unit is always clean and free from obstruction.
• Beams should be checked periodically to ensure they are aligned.

WARNING AND LIMITATIONS
• All installation, repair, and service work to this product must be done by a suitably qualified person.
• Product must be used for its intended purpose and should not be modified.