Product Code: DS-PDMC-EG2-WE

Wireless opening detector that notifies of first signs of room intrusion by means of a
broken door or window. It can be mounted on all types of doors including metal base and the onboard inputs will allow user to extend applications by wiring to different
wired sensors

Specifications:


• Brand: HIKVISION AX-PRO
• Power Switch: Power Up Enrolling
• Transmission Method: Two-Way RF Wireless
• Transmission Frequency: 868MHz
• Power Supply: Battery Powered
• Typical Voltage: 3V
• Operation Temperature: -10 °C to 55 °C (14 °F to 131 °F)
• Storage Temperature: -20 °C to 60 °C (-4 °F to 140 °F)
• Operation Humidity: 10% to 90%

The Wizard energizers have been field tested for many years and boast unsurpassed reliability. Simple to install and easy to maintain.

Product Code: DS-PK1-E-WE

Wireless keypad can connect to AX PRO for alarm control and operation. It can also notice alarm by indicator and buzzer.

Specifications:

• Brand: HIKVISION AX-PRO
• Power Consumption: Quiescent current: 180 uA Max current: 251mA Voltage: 1.5 VDC
• Battery type: Four AA batterie
• Operation humidity: 10% to 90% (No condensing)
• Operation temperature: -10 °C to +55 °C (-4 °F to +122 °F)

Product Code: DS-PSP1-WE

DS-PSP1-WE Wireless Smart Plug offers you a smart home solution to end users, you can connect any electrical devices to this plug, like heater/electric fan/table lamp. You can manually enable or disable the plug via APP/Keyfob/Keypad, also you can enbale or disable it automatically by linking to different system events, like Arm/Disarm, Time schedule, System Status. By using this device, you will have a chance to make your home more intelligent.

Specifications:

• Brand: HIKVISION AX-PRO
• Rated voltage: 100 ... 240 V AC, 50 / 60 Hz
• Maximal total load: 2300 W
• Operation temp: -10 °C ... 55 °C

• Wireless Panel ONLY
• 868MHz
• Up to 96 Wireless Zones
• Built-In LAN, WIFI and GPRS
• 5000 Event Log
• Motion detection up to 15 metres range+L15
• Detection angle: 90 degrees, 180 degrees rotatable
• Can be fitted with an extra camera
• 6 Years operation on supplied battery
• Extremely reliable motion detection thanks to built-in radar module
• Installation height 80cm ~ 120cm

Product Code: DS-PWA64-L-WE

AX PRO supports Wi-Fi, TCP/IP, and GPRS/3G/4G communication methods. It also supports Hik-ProConnect, Hik-Connect, Hik IP Receiver, Hik IP Receiver Pro and Hik-Central, which is applicable to the scenarios of market, store, house, factory, warehouse, office, etc

Specifications:

• Brand: HIKVISION AX-PRO
• Wireless type: 2-way wireless
• Wireless Sounders: 4 (2 Internal+2 External)
• Wi-Fi on board Supported
• SIM slot: Single (Micro SIM)
Power Supply: Built in power supply
• Operation temperature: -10 °C to +55 °C

Xprod Anti-Theft Bracket:

Designed for use with Centurion D5 EVO Motors. Secure anti-theft motor bracket mechanism. Galvanized for long life. Easy assembly and installation. For use with circular or insurance locks.

NB: LOCK NOT INCLUDED

The Centurion D10 Turbo SMART Sliding Gate Motor includes 2 x Securi-Prod 12V 7.2AH Batteries and 2 x Centurion Nova 4 Button Remotes. The Centurion D10 Turbo Smart is a legendary high-volume performer for sliding gates up to 1000kg. The D10 Turbo SMART now offers you speed, security, endurance and reliability, quicker and easier than with any other gate motor in the D10's class, thanks to SMART technology and wireless connectivity. The intelligent choice in residential, commercial and industrial gate automation. Now with award-winning SMART technology and with its powerful 24V motor and die-cast aluminium gearbox, the D10 Turbo SMART sliding gate motor packs a potential punch, providing excellent security on sites ranging from residential properties, townhouse complexes, residential estates, busy office parks and warehouse facilities.

Specifications
Brand: Centurion
Model: D10 Turbo SMART
Compatible remotes: Nova 1 Button, 2 Button and 4 Button(2 Included)
Compatible backup batteries: Securi-Prod 12v 7.2Amp(2 Included) and Securi-Prod 12v 8Amp batteries
Compatible controller PCB: SmartX controller
Compatible antitheft bracket: D10 SMART Bracket
Compatible safety beams: Photon SMART wireless beams
Compatible rack: Steel rack
Input voltage: 90V - 240V AC ± 10% @ 50Hz *1
Current consumption (Mains): 250mA
Battery charger current output: 1.8A @ 27.4V ± 1%
Maximum number of operations per day: 750
Duty cycle - Mains present: 25%
Motor voltage: 24V DC
Motor power supply: Battery-driven (Standard Capacity - 2 x 12V 7.2Ah)
Current consumption (motor at rated load): 10A
Motor push force – starting: 24Kgf
Gate mass – maximum: 1000Kg
Gate length – maximum: 50m
Drive Pinion: 20T Module 4
Collision Sensing: Electronic
Operating temperature range: -15°C to +50°C
Onboard receiver type: Code-hopping multichannel receiver with selective add and delete
Receiver code storage capacity: 1500 Remote buttons
Receiver frequency: 433.92Mhz
Degree of protection: IP54

Instructions for use
• Refer to detailed installer manual.

Maintenance and care
• Ensure that the track is kept clear from stones, dirt or any obstruction. Gate brushes can be installed to assist in clearing the obstructions.
• Ensure that the Gate wheels V profile, Gate wheels U profile or Gateshox run freely.
• Manual override the motor and check that the gate runs freely without any obstruction.
• Check that the rack is properly secured to the gate and that it does not press down on the operator pinion at any point while opening or closing.
• Clean around the motor area to ensure that vegetation does not grow to close to the motor and pinion.
• Check that the key still opens and closes the camlock as well as the discuss lock for the Anti Theft bracket and lubricate if necessary.
• Inspect the inside of the motor by removing the cover and ensure that it is clear of any insects and dust.

Warnings and limitations
• All installations must be done by a suitable qualified technician.
• Under no circumstances may any of the components be modified.

The intelligent power supply or battery charger unit is designed to meet with international safety and certification standards.

The unit has under and over voltage protection and is double fuse-protected. A truly great new product for all your 12V battery backup systems.

• Input Voltage Range: 110V ~ 230V AC 50Hz
• Output Voltage: 13V ~ 14.4V Adjustable
• Max Current output: 6.4A DC / 70Watts
• Relay contact rating: 10A
• AC Fail output rating: 140mA Positive switching
• ABS Plastic enclosure
• Compatible batteries: 12V 17AH & 18AH
• Operating temp: -3°C to 60°C

Code-Hopping Encryption. Unique antenna design incorporating the keyring. increases operating range by 50%. Crystal frequency-controlled within +/- 100KHz. Frequencies available are 403.55MHz. 12V battery operation - GP23A Alkaline Cell. Typically 2 years battery life expected under normal use. LED flashes when there is a low battery condition. Rubber buttons are easy to press and click positively.

Connecting wirelessly to your CENTURION SMΔRT solution, Photon SMART gives you an automated gate system that isn’t just safe, it’s intelligently safe. Photon SMART can be installed with ZERO wires.

• Brand: Centurion
• Power supply: 2 x AA Alkaline Batteries
• (supplied for each transmitter and receiver)
• Battery life: >2 years
• Battery-low indication: Notified via MyCentsys Pro
• Mobile Application
• Maximum operating distance: 30m
• Alignment between beams²: Automatic – 1m @ 10m
• Maximum Operating Distance
• Photon SMΔRT Receiver to SMΔRT
• Controller: 10m
• Operating temperature: -15°C to +65°C
• Operating humidity: 0 - 90° (non-condensing)
• Degree of Protection: IP54

The D5 EVO is one of the best selling motors in the country. It has an intuitive setup, visual diagnostics, advanced timer functionality, battery backup to name few

• voltage: 90 - 240V AC +/-10%, 50Hz
• Motor voltage: 12V DC
• Motor power supply: Battery-driven – 2A charger
• Push force – rated: 17kgf
• Gate speed at push force: < 5kgf 22m/min
• Gate speed at rated push force: 18m/min
• Duty cycle - mains present: 50% | 150 Max Operations per day
• Duty cycle - mains present: 20% | 55 Max Operations per day
• Gate mass - maximum: 500kg
• Onboard receiver type : CENTURION code-hopping,multichannel, 433MHz, capacity - 500 transmitter buttons

The D5 EVO is one of the best selling motors in the country. It has an intuitive setup, visual diagnostics, advanced timer functionality, battery backup to name few.

• voltage: 90 - 240V AC +/-10%, 50Hz
• Motor voltage: 12V DC
• Motor power supply: Battery-driven – 2A charger
• Push force – rated: 17kgf
• Gate speed at push force: < 5kgf 22m/min
• Gate speed at rated push force: 18m/min
• Duty cycle - mains present: 50% | 150 Max Operations per day
• Duty cycle - mains present: 20% | 55 Max Operations per day
• Gate mass - maximum: 500kg
• Onboard receiver type: CENTURION code-hopping,multichannel, 433MHz, capacity - 500 transmitter buttons

The intelligent power supply or battery charger unit is designed to meet with international safety and certification standards.

The unit has under and over voltage protection and is double fuse-protected. A truly great new product for all your 12V battery backup systems.

• Input Voltage Range: 110V ~ 230V AC 50Hz
• Output Voltage: 13V ~ 14.4V Adjustable
• Max Current output: 3.2A DC / 40Watts
• Relay contact rating: 10A
• AC Fail output rating: 140mA Positive switching
• ABS Plastic enclosure
• Compatible batteries: 12V 7AH, 7.2AH & 8AH

Battery not included, sold separately

Product Code: CS-CV310-A0-1B2WFR 2.8mm

Specifications:

• Brand: EZVIZ
• Lens: 2.8 mm @ F2.0, view angle: 109° (Horizontal), 126°(Diagonal)
• Video Compression: H.265 / H.264
• Video Bit Rate: Ultra-HD; HD; Standard. Adaptive bit rate
• Max Resolution: 2304 × 1296
• Frame Rate: Max: 30 fps; Self-Adaptive during network transmission
• Power Supply: DC 12V/1A
• Power Consumption: Max. 6W
• IP Grade: IP67

The Centurion Nova Helix Single Channel Receiver 433 MHz incorporates secure code hopping technology. The Helix receiver offers both link and master learning capabilities to provide the user with the ultimate in usability and security and the technology inherent in the receiver ensures that the functionality goes well beyond the scope of standard receivers, The Helix receiver supports the range of Nova transmitters. The receiver uses self-learning technology, making it quick and easy to set up. For the best results, the receiver must be mounted as high up as possible and preferably away from metal objects and other radio equipment. The antenna wire has been tuned to an optimum length and should not be modified.

• Output channels: 1
• Compatible remotes: 1 Button, 2 Button, 4 Button
• Operating frequency: 433.92MHz
• Supply voltage: 12V to 24V DC
• Quiescent current: @ 12V DC 11mA
• Maximum current: @ 12V DC 40mA
• Operating temperature: Minus 15°C to Positive 50°C
• Humidity: 0 to 90% (non condensing)
• Sensitivity: Minus 115dB
• Self learning memory: 62 buttons
• Receiver enclosure: UV stabilised ABS plastic
•Warranty: 24 Month carry in product Manufacturers warranty

WARNING AND LIMITATIONS
• Do not in any way modify the components of the receiver
• Do not install the receiver near sensitive electrical components
• Do not install the receiver in an explosive atmosphere

The Ajax MotionProtect Plus White is a wireless indoor motion detector that detects human presence by temperature difference with background thermal radiation due to the microwave sensor.

Designed for rooms with air conditioners, fireplaces and where there is a likelihood of light flickering, glare and reflections, eliminating false alarms due to draughts or movement of curtains and blinds.

The MotionProtect Plus can operate for up to 5 years from a builtin battery and monitors the area within a 12meter radius. It ignores animals, while recognizing a human from the first step.

Product Code: 8227.02.WH1

Please note: MotionProtect Plus operates within the Ajax system, connected to the hub via the protected Jeweller protocol.

Compatible with Hub, Hub Plus, Ajax ReX, Ajax ocBridge Plus and Ajax uartBridge.


FEATURES OF THE AJAX MOTIONPROTECT PLUS:
Wireless indoor motion detector
Builtin battery (lasts up to 5 years)
Monitors an area within a 12m radius
Communication range of 1200m (in an open space/line of sight)
Pet Immune (ignores pets with weight of up to 20 kg and height up to 50 cm)
Detector can be used as a part of thirdparty security central units via the uartBridge or ocBridge Plus integration modules.
Detector is set up via the Ajax app for iOS, Android, macOS and Windows
System notifications delivered via push notifications, SMS and calls (if activated).
Quick and Easy installation
Authentication to prevent forgery
Jamming detection and communication channels encryption
Tampering alarm


INSTALLATION AND SETUP
The Ajax MotionProtect Plus comes ready to operate straight out the box.

The battery is preinstalled, so there is no need to disassemble the detector. The Ajax MotionProtect Plus can be mounted on the SmartBracket in just a few minutes.

Connect the MotionProtect to the hub via the mobile application.


SPECIFICATIONS OF THE AJAX MOTIONPROTECT PLUS:
Compatibility: Operates only with Hub, Hub Plus, Ajax ReX, Ajax ocBridge Plus and Ajax uartBridge
Classification: Electrooptical combined radio channel security detector
Type of detector: Wireless
Installation method: Indoors
Sensing element: PIR sensor, microwave sensor (24 GHz)
Alarm signal delivery time: 0.15 s
Motion detection distance: Up to 12 m
Detection angles: Horizontal: 88.5° and Vertical: 80°
Timer of motion detection: From 0.3 to 2 m/s
Sensitivity: Adjustable, 3 levels
Recommended installation height: 2.4 m
Pet immunity: Weight: Up to 20 kg and Height: Up to 50 cm
Power supply: CR123A battery, 3V
Battery life: Up to 5 years
Communication range with central unit: Up to 1,200 m in an open space
Twoway communication between devices: Yes
Operating frequencies: 868.0868.6 MHz
Selfadjusting RF output power: Up to 20 mW
Block encryption based on AES algorithm: Yes
Detector polling period: 12−300 s
Temperature sensor: Available
Operating temperature range: From 10°С to +40°С
Permissible humidity: Up to 75%
Remote setting and testing: Yes
Certification: Grade 2, CE
Product Dimensions: 110 mm х 65 mm × 50 mm
Product Weight: 96g

4-ch 1080p Lite Mini 1U H.265 DVR
H.265 Pro+/H.265 Pro/H.265 video compression
HDTVI/AHD/CVI/CVBS/IP video input
Audio via coaxial cable
Up to 5-ch IP camera input (up to 1080p)
Encoding ability up to 1080p lite @ 25/30 fps
Max. 1200 m for 720p HDTVI signal


Recording
Video Compression
H.265 Pro+/H.265 Pro/H.265/H.264+/H.264
Encoding Resolution
When 1080p lite mode not enabled: 720p/WD1/4CIF/VGA/CIF

When 1080p lite mode enabled: 1080p Lite/HD 720p Lite/WD1/4CIF/VGA/CIF

Frame Rate
Main stream:

When 1080p Lite mode not enabled:

For 720p stream access: 720p/WD1/4CIF/VGA/CIF@25 fps (P)/30 fps (N)

When 1080p Lite mode enabled:

1080p Lite/HD 720p Lite/WD1/4CIF/VGA/CIF@25 fps (P)/30 fps (N)

Sub-stream:

4CIF/CIF/QVGA@25 fps (P)/30 fps (N)

Video Bitrate
32 Kbps to 4 Mbps
Stream Type
Video, Video & Audio
Audio Compression
G.711u
Audio Bitrate
64 Kbps
Video And Audio
IP Video Input
1-ch (up to 5-ch)

Up to 1080p resolution

Support H.265+/H.265/H.264+/H.264 IP cameras

Analog Video Input
4-ch

BNC interface (1.0 Vp-p, 75 `d9), supporting coaxitron connection

HDMI Output
1-ch, 1920 `d7 1080/60Hz, 1280 `d7 1024/60Hz, 1280 `d7 720/60Hz, 1024 `d7 768/60Hz

HDMI/VGA simultaneous output

VGA Output
1-ch, 1920 `d7 1080/60Hz, 1280 `d7 1024/60Hz, 1280 `d7 720/60Hz, 1024 `d7 768/60Hz

HDMI/VGA simultaneous output

CVBS Input
Support
Synchronous Playback
4-ch
AHD Input
1080p25, 1080p30, 720p25, 720p30
HDCVI Input
1080p25, 1080p30, 720p25, 720p30
Audio Output
1-ch, RCA (Linear, 1 K`d9)
Audio Input
1-ch RCA (2.0 Vp-p, 1 K`d9)

4-ch via coaxial cable

Two-Way Audio
Reuse the first audio input
Network
Network Protocol
TCP/IP, PPPoE, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP`99, HTTPS
Remote Connection
32
Network Interface
1, RJ45 10/100 Mbps self-adaptive Ethernet interface
Auxiliary Interface
SATA
1 SATA interface
Capacity
Up to 4 TB capacity for each disk
USB Interface
Rear panel: 2 `d7 USB 2.0
Alarm In/Out
N/A
General
Power Supply
12 VDC, 1.5 A
Consumption
≤ 16 W
Working Temperature
-10 `b0C to 55 `b0C (14 `b0F to +31 `b0F)
Working Humidity
10% to 90%
Dimension (W `d7 D `d7 H)
200 `d7 200 `d7 45 mm (7.9 `d7 7.9 `d7 1.8 inch)
≤ 0.8 kg (1.8 lb)

The Ajax MotionProtect Curtain is a curtain type wireless motion detector with a narrow horizontal detection angle designed for indoor perimeter control of windows, doorways, passages, other entrances or exits and valued goods i.e expensive artworks, sculptures etc.

The Ajax MotionProtect Curtain allows you to secure the perimeter of your house whilst freely moving around indoors and if setup correctly can ignore pets, even if you own a Saint Bernard.

Please note: MotionProtect Curtain integrates into Ajax systems, connecting to the hub via the protected Jeweller protocol.

The Ajax MotionProtect Curtain is compatible with all Ajax hubs and Ajax ReX

Product Code: 13268.36.WH1


FEATURES OF THE AJAX MOTIONPROTECT CURTAIN:
Wireless Indoor Motion Detector
Builtin battery (lasts up to 3 years)
Detects motion with a range of up to 15 meters
Wireless coverage may reach up 1,700 m lineofsight.
Detector will continue to operate even if the temperature drops to 10°C.
Detector is set up via the Ajax app for iOS or Android
System notifications delivered via push notifications, SMS and calls (if activated).
Quick and Easy installation
Ajax can be connected to the central monitoring station of a security company.


INSTALLATION AND SETUP
The Ajax MotionProtect Curtain comes ready to operate straight out the box.

The battery is preinstalled, so there is no need to disassemble the detector. The Ajax MotionProtect Curtain connects to the security system via the Ajax app, simply scan the QR code, add the detector to the room, and proceed to installation.


SPECIFICATIONS OF THE AJAX MOTIONPROTECT CURTAIN:
Compatible: Operates with all Ajax hubs and Ajax ReX
Classification: Radiointerlinked photoelectric security detector
Type of detector: Wireless
Motion detection distance: Adjustable (from 6 m to 15 m)
Installation: Indoors only
Sensing element: Two PIR sensors
False alarm reduction: Available, Correlation Signal Processing
Alarm signal delivery time: 0.15 seconds
Detection angles: Horizontally: 6° & Vertically: 90°
Time for motion detection: From 0.3 to 2 m/s
Sensitivity: Adjustable, 3 levels
Recommended installation height: 2.4 meters
Power supply: CR123A, 3V
Battery life: Up to 3 years
Communication range with detectors: Up to 1,700 m in an open space
Twoway communication between devices: Yes
Operating frequencies: 868.0 868.6 MHz
Selfadjusting RF output power: Up to 20 mW
Block encryption based on AES algorithm: Yes
Detector polling period: 12−300 s
Frequency hopping: Yes
Temperature sensor: Available
Operating temperature range: From −10°С to +40°С
Operating humidity: Up to 95%
Fraud protection: Yes
Jamming notification: Yes
Tamperresistant: Yes
Remote configuration and testing: Yes
Protection class: IP54
Product Dimensions: 134 mm х 44 mm х 34 mm
Product Weight: 118g

The Ajax CombiProtect White is an indoor wireless combined motion and glass break detector. The device helps to secure the room from intruders entering through doors and windows and monitors the current state of the glass.

It can ignore animals and detects a person within the protected zone from the first step.

Product Code: 7170.06.WH1

Please note: CombiProtect operates within the Ajax system, connected to the hub via the protected Jeweller protocol.

Compatible with Hub, Hub Plus, Ajax ReX, Ajax ocBridge Plus and Ajax uartBridge.


FEATURES OF THE AJAX COMBIPROTECT:
Wireless indoor combined motion and glass break detector
Detects motion at a distance of up to 12 m and breakage at up to 9 m
Builtin battery (lasts up to 5 years)
Communication range of 1200m (in an open space/line of sight)
Pet Immune (ignores pets with weight of up to 20 kg and height up to 50 cm)
Filters false alarms caused by thunder, dogs barking or the sound of passing trucks.
Detector can be used as a part of thirdparty security central units via the uartBridge or ocBridge Plus integration modules.
Detector is set up via the Ajax app for iOS, Android, macOS and Windows
System notifications delivered via push notifications, SMS and calls (if activated).
Quick and Easy installation
The Ajax system is selfsustaining, but the user can connect it to the central monitoring station of a private security company.


INSTALLATION AND SETUP
The Ajax CombiProtect comes ready to operate straight out the box.

The battery is preinstalled, so there is no need to disassemble the detector. It can be mounted on the SmartBracket in just a few minutes and with one click, the Ajax Wireless CombiProtect can be connected to the hub in the mobile application.


SPECIFICATIONS OF THE AJAX COMBIPROTECT:
Compatibility: Operates only with Hub, Hub Plus, Ajax ReX, Ajax ocBridge Plus and Ajax uartBridge
Classification: Electrooptical combined radio channel security detector
Type of detector: Wireless
Installation method: Indoors
Sensing element: PIR sensor, electret microphone
Alarm signal delivery time: 0.15 s
Motion detection distance: Up to 12 m
Detection angles: Horizontal: 88.5° and Vertical: 80°
Time for motion detection: From 0.3 to 2 m/s
Recommended installation height: 2.4 m
Pet immunity: Weight: Up to 20 kg and Height: Up to 50 cm
Break detection distance: Up to 9 m
Detection angle: 180°
Sensitivity: Adjustable, 3 levels
Power supply: CR123A battery, 3V
Battery life: Up to 5 years
Communication range with central unit: Up to 1,200 m in an open space
Twoway communication between devices: Yes
Operating frequencies: 868.0868.6 MHz
Selfadjusting RF output power: Up to 20 mW
Block encryption based on AES algorithm: Yes
Detector polling period: 12−300 s
Tampering alarm: Yes
Frequency hopping: Yes
Protection against forgery: Yes
Temperature sensor: Available
Operating temperature range: From 10°С to +40°С
Permissible humidity: Up to 75%
Remote setting and testing: Yes
Certification: Grade 2, CE
Product Dimensions: 110 mm х 65 mm × 50 mm
Product Weight: 92g

16-ch 1.5U AcuSense 4K NVR
H.265+/H.265/H.264+/H.264 video formats
Intelligent analytics based on deep learning algorithm
Up to 4-ch perimeter protection
Up to 1-ch facial recognition for video stream, or up to 4-ch facial recognition for face picture
Up to 16-ch IP camera inputs
Up to 16-ch 1080p decoding capability
Up to 160 Mbps incoming bandwidth



System Parameter
Video Input Channel
16
Incoming Bandwidth
160 Mbps
Outgoing Bandwidth
256 Mbps
Video Resolution
12MP/8MP/7MP/6MP/5MP/4MP/3MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF
Video Parameter
Video Output
2-ch HDMI, 1-ch VGA
HDMI Output
HDMI1 output: 4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 × 1080/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz, HDMI1/VGA simultaneous output HDMI2 output:1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz, HDMI2/VGA independent output
VGA Output
1-ch, 1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz,
CVBS Output
1-ch, BNC (1.0 Vp-p, 75 Ω), resolution: PAL: 704 × 576, NTSC: 704 × 480
Live View Window Division
1/4/6/8/9/16/25/32/36
Aux Port Window Division
1/4/6/8/9/16/25/32/36
Video Decoding Format
H.265;H.265+;H.264;H.264+;MPEG4
Decoding Capability
16-ch @ 1080p (30 fps)
Synchronous Playback
16-ch
Audio Parameter
Audio Decoding Format
G.711ulaw;G.711alaw;G.722;G.726;MP2L2
Audio Output
1-ch, RCA (Linear, 1 KΩ)
Two-Way Audio
1-ch, RCA (2.0 Vp-p, 1 KΩ)
Smart Analysis
Face Picture Library
Up to 16 face picture libraries, with up to 10,000 face pictures in total (each picture ≤ 512 KB, total capacity ≤ 150 MB)
List Library Capacity
1w
List Library
16
Face Picture Comparison
4-ch face picture comparison alarm
Face Capture
1-ch human face capture (HD network camera, up to 4 MP, H.264/H.265)
HDD Management
HDD No.
4 SATA interfaces
Extended Storage
1 eSATA interface
Recording Management
Playback Mode
Normal/Smart, Event, Tag, Eternal File
External Port
Network Interface
2, RJ-45 10/100/1000 Mbps self-adaptive Ethernet interface
Serial Port
RS-485 (half-duplex), RS-232, Keyboard
USB Interface
Front panel: 2 × USB 2.0; Rear panel: 1 × USB 3.0
Alarm Input/Output
16/4
General Standard
Power
≤ 80W
Consumption (Without HDD)
≤ 30W
Working Temperature
-10℃～＋55℃
Working Humidity
10％～90％
Chassis
1.5U
Dimension
445 × 400 ×75 mm ( 17.5"× 15.7" × 3.0")
Weight (Without HDD)
≤ 5.6 kg (12.3 lb)

The Ajax MotionProtect is a wireless indoor motion detector that detects human presence by using a passive IR sensor. It can operate for up to 5 years from a builtin battery and monitors the area within a 12meter radius. MotionProtect ignores animals, while recognizing a human from the first step.

Product Code: 5314.09.BL1

Please note: MotionProtect operates within the Ajax system, connected to the hub via the protected Jeweller protocol.

Compatible with all Ajax hubs, Ajax ReX, Ajax ocBridge Plus and Ajax uartBridge.


FEATURES OF THE AJAX MOTIONPROTECT:
Wireless motion detector
Builtin battery (lasts up to 5 years)
Monitors an area within a 12m radius
Communication range of 1700m (in an open space/line of sight)
Pet Immune (ignores pets with weight of up to 20 kg and height up to 50 cm)
Accurately detects motion in heat conditions, even at a temperature of +40°С
Detector can be used as a part of thirdparty security central units via the uartBridge or ocBridge Plus integration modules.
Detector is set up via the Ajax app for iOS, Android, macOS and Windows
System notifications delivered via push notifications, SMS and calls (if activated).
Quick and Easy installation
Authentication to prevent forgery
Jamming detection and communication channels encryption
Tampering alarm


INSTALLATION AND SETUP
The Ajax MotionProtect comes ready to operate straight out the box.

The battery is preinstalled, so there is no need to disassemble the detector. The Ajax MotionProtect can be mounted on the SmartBracket in just a few minutes and fastened to the wall in front of the doors and other places likely of intruder entry.

Connect the MotionProtect to the hub via the mobile application.


SPECIFICATIONS OF THE AJAX MOTIONPROTECT:
Compatibility: Operates with all Ajax hubs, Ajax ReX, Ajax ocBridge Plus and Ajax uartBridge
Classification: Electrooptical combined radio channel security detector
Type of detector: Wireless
Installation method: Indoors
Sensing element: PIR sensor
Alarm signal delivery time: 0.15 s
Motion detection distance: Up to 12 m
Detection angles: Horizontal 88.5° & Vertical 80°
Time for motion detection: From 0.3 to 2 m/s
Sensitivity: Adjustable, 3 levels
Recommended installation height: 2.4 m
Pet immunity: Weight Up to 20 kg & Height Up to 50 cm
Power supply: CR123A battery, 3V
Battery life: Up to 5 years
Communication range with central unit: Up to 1,700 m in an open space
Twoway communication between devices: Yes
Operating frequencies: 868.0—868.6 MHz
Selfadjusting RF output power: Up to 20 mW
Block encryption based on AES algorithm: Yes
Device polling period: 12−300 s
Temperature sensor: Available
Operating temperature range: From 10°С to +40°С
Permissible humidity: Up to 75%
Remote setting and testing: Yes
Certification: Grade 2, CE
Product Dimensions: 110 mm х 65 mm × 50 mm
Product Weight: 86g

In the security and theft protection sector it can be essential to mark valuable objects without altering their appearance. For those reasons edding developed the 8280 securitas uv marker - a marker which's quick-drying permanent ink is only visible under a ultra-violet light. The marker works on virtually all surfaces. Its waterproof and wear-resistant ink is a highlight for security. Round nib 1,5-3 mm ultraviolet

The ET-Blu Mix range of transmitters is fully compatible with the ET500 Plus, ET1000 and Umpetha sliding gate motors, 90 Blue and Axis swing gate motors, DC Blue Digital and ET Roll-Up garage door motors, 1 channel, 3 channel and the 999 user RXCONDO rolling code receivers. The ET-Blu Mix transmitter's stylish compact design offers the user a unique experience in transmitter technology.

ET-Blu Mix Rolling Code Transmitters make use of an enhanced rolling code format ("©G&C Electronics CC T/A E.T. Systems 2010"), currently offering the user the ultimate in transmitter transmission security. A unique feature is that the user has the option of selecting either the new enhanced rolling code or the previous existing rolling code format, which makes the product backward compatible to E.T. rolling code receivers.

The ET-Blu Mix transmitter’s stylish compact design offers the user a unique experience in transmitter technology.Two Button Remote
• Enhanced rolling code format
• Dual code system
• Compatible with new & old E.T. receivers
• 433MHz code hopping.