T80 FERRARI 488 GTB EDITION

8:10 scale replica of the Ferrari 488GTB, officially licensed by Ferrari and PlayStation®4 , for total realism in all PlayStation®4 racing games supporting wheels.

Thrustmaster T.Flight Hotas One Flight Stick for Xbox One & Windows
T.Flight Hotas One, an officially-licensed joystick for Xbox One and Windows, provides a high level of realism: the stick includes five axes, fourteen action buttons, a rapid-fire trigger and a multidirectional hat switch (navigation/panoramic view), all of which are easily accessible. The throttle – detachable and full-size for easy maneuverability, even in virtual reality – provides super-responsive power. The dual rudder system can be engaged by rotating the handle (with an integrated locking system) or via the progressive tilting lever. The T.Flight Hotas One includes official buttons for the Xbox One console (Guide/View/Menu): access social features, switch between the game and the console, navigate through the console’s menus, etc.

Key points:

• The first official joystick for Xbox One and Windows, with the official buttons for the Xbox One console.
• Ergonomic design perfectly adapted for all types of flight simulation (space adventure, modern combat, warplanes, civil flight).
• Detachable, full-size throttle for easy maneuverability, even in virtual reality.
• Adjustable handle resistance with wide hand-rest.
• Comprehensive flight gear: 5 axes + 14 action buttons + 1 rapid-fire trigger + 1 multidirectional hat switch (navigation/panoramic view).

Realistic, ergonomic joystick
In real life, the flight controls used by pilots include a stick and a throttle: this combination is extremely effective in terms of performance and precision. The T.Flight Hotas One provides the same level of realism.
The joystick's realistic, ergonomic design is perfectly adapted to all types of flight (aerial combat, space adventure, civil flight, etc.). The wide hand-rest helps gamers keep their hand in a very stable and relaxed position, allowing the stick to react to even subtle movements.
Adjust the stick's resistance according to your needs and preferences. The base is weighted, for enhanced stability during gaming sessions.

Detachable throttle
The joystick includes a full-size throttle, which you can use to easily control the acceleration of your aircraft.
The throttle is detachable and may be positioned in either of two different ways:

• Detached and separated from the joystick (to recreate authentic piloting conditions); or
• Attached to the joystick (for greater stability and to take up less space).

Dual rudder system
The joystick features a rudder function, which in a plane corresponds to the pedals used by the pilot to turn the steering, allowing the plane to pivot around its vertical axis (therefore making the plane turn left or right). This rudder function is accessible by rotating the joystick’s handle (with integrated locking system), or via the progressive tilting lever.

Ecosystem
The T.Flight Hotas One joystick is part of Thrustmaster’s flight simulation ecosystem. It is therefore compatible with the T.Flight Rudder Pedals – the first rudder to feature the S.M.A.R.T (Sliding Motion Advanced Rail Tracks) slide rails system, for smoother turns.

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your PS4 Slim Console:

This skin will fit the PS4 Slim Console. (Will not fit the Standard or Pro console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:

-Covers PS4 Bottom, Top & Sides
-Covers 2 x Controllers
-Thin and tough protects from minor scratches
-Easy, bubble-free installation and sticky free removal
-No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your Xbox X Console:

This skin will fit the Xbox X Console. (Will not fit the Xbox Standard or S console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:
• Covers complete console, two controllers and the Kinect
• Thin and tough protects from minor scratches
• Easy, bubble-free installation and sticky free removal
• No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your Xbox X Console:

This skin will fit the Xbox X Console. (Will not fit the Xbox Standard or S console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:
• Covers complete console, two controllers and the Kinect
• Thin and tough protects from minor scratches
• Easy, bubble-free installation and sticky free removal
• No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

Thumb Grip Stick Covers for PS4/Xbox360/Xbox One /PS3/PS2

1.PERFECT FIT “ provides the perfect fit to your thumb sticks. Number one cap accessories for gaming. Comes in blue and black sets - total 2 pairs.
OIL RESISTANT “ resistant to dust, oil and grease. Looks new every time, lasts long and are durable. The ideal thumb grips for the everyday Xbox and PlayStation gamer.
2. BETTER GRIP and CONTROL provides a better grip and control than virtually any other similar grips. Offers industry-leading convenience for controllers with an analogue stick.
3.UNIVERSAL COMPATIBILITY the thumb grip covers are compatible with the PS4, Xbox 360, PS3, PS2, Xbox One and a whole lot of other controllers. Use on multiple devices.
4. EASY OPERATION works easy, no greasy mess. Give your thumbs optimal rest with these premium cushion thumb grips.

The Thumb Grip Stick covers are the new end-game for modern-day controller gaming. Made to make gaming a whole lot better and more appealing to users, these covers offer a lot more than the typical thumb stick grips. You get the comfort and ease you need to control your games and elevate performance to grand new levels for console players.
This accessory provides the best of analog stick covers. There are super easy to attach to any analog stick. They provide ample benefits to gamers, including making slippage impossible, as well as enhancing the feel-of-the-game and increasing sensitivity during play. Users already tried this new way of making gaming wow insists that they wouldn't play without these cool covers again.


Made from premium materials, the covers are soft to the touch and have an invigorating feeling on your fingers when you're figuring out how to make the next move during game play. All this has the effect of making time pass and elongating play time even for the most conservative gamers. More so, you get an extra grip when you need it most. If you are looking to beat the arrogance out of your competitors during the next group or friends game play, this is the ideal accessory for you. The analog thumb grip stick covers were designed to give hardcore gamers the competitive edge they need to make things happen every time. Get a pack now and play your games smart rather than hard!

Compatible with Multiple Controllers

The analog thumb grip sticks works for Xbox One,Xbox 360, PS4, PS3, PS2 and a host of other controllers that leverage analog sticks. Looking to equip your gaming moments with top of the line accessories that will help you make the best out of every second? This is the accessory you just need.

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your Xbox Console:

This skin will fit the Standard Xbox Console. (Will not fit the Xbox S or X console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:
• Covers complete console, two controllers and the Kinect
• Thin and tough protects from minor scratches
• Easy, bubble-free installation and sticky free removal
• No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your PS4 Pro Console:

This skin will fit the PS4 Pro Console. (Will not fit the Standard or Slim console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:

-Covers PS4 Bottom, Top & Sides
-Covers 2 x Controllers
-Thin and tough protects from minor scratches
-Easy, bubble-free installation and sticky free removal
-No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

The Valve Steam Deck is the ultimate handheld gaming machine that lets you take
your Steam library on the go.

Features:
Fastest storage
Premium anti-glare etched glass
Exclusive carrying case
Exclusive Steam Community profile bundle
Exclusive virtual keyboard theme

PORTABILITY MEETS POWER Partnered with AMD, the Steam Deck's custom APU is
optimized for handheld gaming. It is a Zen 2 + RDNA 2 powerhouse, delivering
more than enough performance to run the latest AAA games in a very efficient
power envelope

YOUR STEAM LIBRARY, ANYWHERE Once you've logged into Steam Deck, your entire
Steam Library shows up, just like any other PC. You'll also see the
compatibility rating of each game, indicating the kind of experience you can
expect when playing. You can dynamically filter any view in your library by
compatibility rating if you're looking for specific sorts of experiences.

CONTROL WITH COMFORT The Steam Deck was built for extended play
sessions—whether you're using thumbsticks or trackpads—with full-size controls
positioned perfectly within your reach. The rear of the device is sculpted to
comfortably fit a wide range of hand sizes.

Technical Specifications:

RAM:
16 GB on-board RAM
512 GB high-speed NVMe SSD

Gamepad Controls:
A B X Y buttons
D-pad
L & R analog triggers
L & R bumpers
View & Menu buttons
4 x assignable grip buttons

Thumbsticks:
2 x full-size analog sticks with capacitive touch

Haptics:
HD haptics

Resolution: 1280 x 800px (16:10 aspect ratio)

Bluetooth: Bluetooth 5.0 (support for controllers, accessories and audio)

Wi-Fi: Dual-band Wi-Fi radio, 2.4GHz and 5GHz

Microphones: Dual microphone array

Headphone / mic jack: 3.5mm stereo headphone / headset jack

microSD: UHS-I supports SD, SDXC and SDHC

Operating System: SteamOS 3.0 (Arch Based)

*Please also note: This product is a parallel import. This has nothing to do
with the authenticity of the product (it is completely authentic) but means it
has been imported without the approval, or license of the registered owner of
the trademark and therefore no guarantee or warranty in respect of such goods
will be honoured or fulfilled by any official or licensed importer of such
goods. However, any warranty claims will be covered by the relevant third party
seller, in accordance with our standard return/refund policy.

*Please also note: Although we can ensure full functionality of this product its
hardware and games, some features and/or services advertised could potentially
not be available in your country at this time. Services are made available by
Valve at their sole discretion. Please do research on the availability of a
specific service before purchasing.

Thumb Grip Stick Covers for PS4/Xbox360/Xbox One /PS3/PS2

1.PERFECT FIT “ provides the perfect fit to your thumb sticks. Number one cap accessories for gaming. Comes in blue and black sets - total 2 pairs.
OIL RESISTANT “ resistant to dust, oil and grease. Looks new every time, lasts long and are durable. The ideal thumb grips for the everyday Xbox and PlayStation gamer.
2. BETTER GRIP and CONTROL provides a better grip and control than virtually any other similar grips. Offers industry-leading convenience for controllers with an analogue stick.
3.UNIVERSAL COMPATIBILITY the thumb grip covers are compatible with the PS4, Xbox 360, PS3, PS2, Xbox One and a whole lot of other controllers. Use on multiple devices.
4. EASY OPERATION works easy, no greasy mess. Give your thumbs optimal rest with these premium cushion thumb grips.

The Thumb Grip Stick covers are the new end-game for modern-day controller gaming. Made to make gaming a whole lot better and more appealing to users, these covers offer a lot more than the typical thumb stick grips. You get the comfort and ease you need to control your games and elevate performance to grand new levels for console players.
This accessory provides the best of analog stick covers. There are super easy to attach to any analog stick. They provide ample benefits to gamers, including making slippage impossible, as well as enhancing the feel-of-the-game and increasing sensitivity during play. Users already tried this new way of making gaming wow insists that they wouldn't play without these cool covers again.


Made from premium materials, the covers are soft to the touch and have an invigorating feeling on your fingers when you're figuring out how to make the next move during game play. All this has the effect of making time pass and elongating play time even for the most conservative gamers. More so, you get an extra grip when you need it most. If you are looking to beat the arrogance out of your competitors during the next group or friends game play, this is the ideal accessory for you. The analog thumb grip stick covers were designed to give hardcore gamers the competitive edge they need to make things happen every time. Get a pack now and play your games smart rather than hard!

Compatible with Multiple Controllers

The analog thumb grip sticks works for Xbox One,Xbox 360, PS4, PS3, PS2 and a host of other controllers that leverage analog sticks. Looking to equip your gaming moments with top of the line accessories that will help you make the best out of every second? This is the accessory you just need.

1800mAh Controller Battery For SONY PlayStation 3 PS3 Battery


Description:

- Brand new relacement battery pack for Sony Playstation PS3 controllers.

- Recharge battery while you continue to play.

- High performance Li-ion rechargeable batteries charge indicators.

- Charged by USB cable via your for Sony for Playstation PS3 or USB device


Specifications:

- Maximum charge current: 0.4 A.

- Maximum charge voltage: 4.2V. Battery only, for Sony for Playstation


PS3 Controller not inclued


Note:Do not expose to high temp


Package Includes:

- 1 x Battery

- 1 x USB Cable for Playstation 3 1800mAH Replacement Battery Pack For SONY PS3

The Valve Steam Deck is the ultimate handheld gaming machine that lets you take your Steam library on the go.

Features:
Faster storage
Carrying case
Exclusive Steam Community profile bundle

PORTABILITY MEETS POWER - Partnered with AMD, the Steam Deck's custom APU is optimized for handheld gaming. It is a Zen 2 + RDNA 2 powerhouse, delivering more than enough performance to run the latest AAA games in a very efficient power envelope

YOUR STEAM LIBRARY, ANYWHERE - Once you've logged into Steam Deck, your entire Steam Library shows up, just like any other PC. You'll also see the compatibility rating of each game, indicating the kind of experience you can expect when playing. You can dynamically filter any view in your library by compatibility rating if you're looking for specific sorts of experiences.

CONTROL WITH COMFORT - The Steam Deck was built for extended play sessions—whether you're using thumbsticks or trackpads—with full-size controls positioned perfectly within your reach. The rear of the device is sculpted to comfortably fit a wide range of hand sizes.

Technical Specifications:

RAM:
16 GB on-board RAM
256 GB NVMe SSD

Gamepad Controls:
A B X Y buttons
D-pad
L & R analog triggers
L & R bumpers
View & Menu buttons
4 x assignable grip buttons

Thumbsticks:
2 x full-size analog sticks with capacitive touch

Haptics:
HD haptics

Resolution: 1280 x 800px (16:10 aspect ratio)

Bluetooth: Bluetooth 5.0 (support for controllers, accessories and audio)

Wi-Fi: Dual-band Wi-Fi radio, 2.4GHz and 5GHz

Microphones: Dual microphone array

Headphone / mic jack: 3.5mm stereo headphone / headset jack

microSD: UHS-I supports SD, SDXC and SDHC

Operating System: SteamOS 3.0 (Arch Based)

*Please also note: This product is a parallel import. This has nothing to do with the authenticity of the product (it is completely authentic) but means it has been imported without the approval, or license of the registered owner of the trademark and therefore no guarantee or warranty in respect of such goods will be honoured or fulfilled by any official or licensed importer of such goods. However, any warranty claims will be covered by the relevant third party seller, in accordance with our standard return/refund policy.

*Please also note: Although we can ensure full functionality of this product its hardware and games, some features and/or services advertised could potentially not be available in your country at this time. Services are made available by Valve at their sole discretion. Please do research on the availability of a specific service before purchasing.

Multi-Axis Steering Wheel For PS5 Controller

For PS5 gamepad dedicated racing steering wheel

*Specially designed for PS5 racing games.

*Imitate the real racing steering wheel design, with accurate hole design, excellent workmanship, and easy installation.

*There are 4 suction cups at the bottom, which are easy to fix and can simulate a real racing steering wheel, which enhances the game experience and is good for playing.

*The steering wheel can also be used alone without fixing it to the bracket.

Raz Tech Has a wide range of High-Quality cellular and computer accessories (Glass screen protectors, Screen Protectors, Cases, Batteries, Earphones, Headphones, USB cables, Bluetooth keyboards) at competitive prices. We strive to provide accessories for every kind of device and brand sold in South Africa (Apple, Sony, Huawei, Samsung, HTC, Blackberry, LG).

PS4 Temperature Control Fan

REALISM AND AUTHENTICITY
 - 13 cm tall gear stick with knob
 - Realistic gear-shifting feel
 - Detachable knob
 - Compatible with real universal knobs (available in car tuning shops)
 - 2 shift-plates included: "H"-pattern (7+1) and Sequential (+/-)

STURDINESS AND PRECISION
 - 100% metal internal mechanism
 - 100% metal gear stick
 - 100% metal clamping system
 - H.E.A.R.T HallEffect AccuRate Technology
 - Precision that won’t decrease over time (contactless magnetic sensor)
 - No tact switch and no potentiometer (for unlimited product lifespan)
 
ADAPTABILITY AND COMFORT
 - Upgradable firmware, and internal memory with adjustable gear-shift travel to suit your driving style (software available for download on PC)
 - Adjustable resistance when shifting gears
 - Shift-plate position and rotation adjustable by 360°
 - Clamping system position and rotation adjustable by 360°
 - Optimized clamping for any support surface
 - Tables or shelves from 1 to 55 mm in thickness
 - Cockpits (built-in screw threads + removable clamping system)
 
VERSATILITY
 - Unique design allowing for 2 different driving styles
 - "H"-pattern (7+1)
 - Sequential (+/-)

USB and/or DIN connectivity
 - On PC: works with all racing wheels on the market
 - On PS3 and PS4: works with the T500RS, Ferrari F1 Wheel Integral T500, T300RS and T300 Ferrari GTE racing wheels
 - On Xbox One: works with the TX Racing Wheel

1800mAh Replacement Battery+Charger Cable PS3 for Sony PlayStation3 Wireless Controller 3.7V Rechargeable Batteries

Rechargeable Batteries Li-Ion Lithium 3.7V

·100% new high-quality Battery Pack Replacement Wireless Controller For Sony PS3
·Quantity: 1.
·Color: gray
·The console battery is designed on the basis of the specification of the controller built-in battery.
·Dismantle and then open the bottom cover of the controller to replace the battery.
·Helps to prolong the using time of the controller.
·Li-ion Battery Pack
·Voltage:3.7V
·Capacity:1800mAh

What you see before you is the first of a new species; Stitch also known as Experiment 626. From the world of gaming and entertainment and best known for his leading role in Walt Disney’s Lilo & Stitch movies, fans will know Stitch’s only instinct is to destroy everything he touches. Crashlanding as part of our world-leading phone and controller holder collection Cable Guys, and continuing the abandonment of his evil programming, Stitch is here to support your gaming controller, mobile phone, or anything else you can fit into his hands. Stitch is not bad, Stitch fluffy.

Every good gamer knows that not only graphics and gameplay, but also sound effects play a role. These gaming headphones have earrings in the desired design, cover the ear enough, but are still compact. In addition, their closed design ensures flawless music isolation in your ears. Compared to similar models, they have a remarkably long 2.2m cable, which leads unidirectionally, into one earplug. Works with a 3.5 mm jack. An effective microphone is an integral part of the headphones.

BigBen PS4 Stereo Headset v3 - White also has a microphone!
Not only players will appreciate a solid microphone. The BigBen Interactive headset microphone guarantees uninterrupted connectivity with anyone, anywhere, on Skype, Teamspeak or any other chat. Its folding design does not interfere with the use of headphones just to listen to music.

2 in 1 Dual Charging Docking Station Charger Sony PS3 Playstation 3 Move Controller Joystick rechargeable battery charger

Characteristic:
100% brand new and high quality
Portable, efficient and easy to use
High-efficiency charging efficiency
2 led charging indicator for charging status
Convenient storage rack for controller
The controller USB charger does not require any other power source.
You can charge two ps3 controllers or a ps3 mobile controller at the same time.
accessory! Ps3 Controller or Move Controller Not Included

details:
Input: 5V-1000mA
Output: 5V-500mA
Material: PC
Size: about 120 x 61 x 24mm / 4.72 x 2.4 x 0.94 inch
Weight: 107g
Color: Black

Bring back old memories with the USB Nintendo N64 Styled Game Controller! Do you still remember the old Nintendo 64 video games? As an old school gamer, you must have played these old games: Zool - Majuu Tsukai Densetsu (Japan), Zelda no Densetsu - Toki no Ocarina (Japan), Kirby 64 - The Crystal Shards (USA), Twisted Edge - Extreme Snowboarding (USA), Conker's bad fur day, Gex 64 - Enter the Gecko, MRC - Multi Racing Championship, NBA Jam 99, Alice no Wakuwaku Trump World, etc.

Never stop gaming with the Xbox Controller Value bundle which includes 1x White Controller, 1x Rechargable Battery and 1x USB-C Cable.

Keep the action going with the Xbox Rechargeable Battery + USB-C Cable.

• Holds PlayStation and Xbox game Controllers
• Holds device whilst charging
• Works with all models of cell phones
• Includes 2m charging cable & adaptors (micro USB & lightning)
• Styled on "Miles Morales" From Marvel Spider-man franchise
• Officially Licensed merchandise

7/10 replica of the FERRARI 458 SPIDER racing wheel
Wheel base featuring the ‘Bungee Cord’ mechanism, offering linear resistance (automatic centering system patented by Thrustmaster)

Optimized ‘Bungee Cord’ mechanism: delivers linear resistance, regardless of the rotation angle, ensuring ergonomic and intuitive control

Automatic centering
240 degree rotation angle

Kinect detection LED
Built-in controller pairing detection LED  for  Kinect

Adjustable wheel sensitivity
Adjustable wheel sensitivity (4 included presets) ensuring more precise driving in all games

Wide adjustable pedal set
2 pedals with wide footrest
Brake pedal offering progressive resistance
Individually adjustable pedals

Realistic: 28 cm diameter racing wheel featuring a rubber-textured grip

2 Up & Down metal paddle shifters
100% metal
Pour un pilotage style Ferrari GT

Comprehensive driving gear
9 x replica action buttons (including View and Menu buttons)
1 x Manettino (2 positions)
1 x ENGINE START D-Pad
1 x Xbox Guide button
2 x red rubber-textured grips, inspired by motor sports ensuring excellent ergonomics and optimum comfort

Central clamping system
Ensures optimum stability on all desks or tables

Product description
Features:
・Reusable and high quality cable cord
・Multiple use and Competitive Price
・Suitable for SONY PS2,PS3 and PSX
・Great for modern HD LCD LED televisions

Product Specifications:
➤Cable length: 6 feet

Compatible Model:
PS2,PS3 and PSX

Package Contents:
★2*AV cable

NEXT-GEN force feedback racing simulatorfor Xbox One™ and PC Complete pack featuring: - Detachable leather wheel TM Leather 28 GT - TX Racing Wheel Servo Base - 3-pedals pedal set T3PA Add-On