From time immemorial, firewood has been a very important source of energy for mankind. Later in history, wood for energy decreased its importance because of other more convenient and cheaper sources, mainly fossil fuels. Today, focus is again on use of forests as a producer of energy with main drivers being climate change, shortage and increasing prices of fossil fuel sources, and safety in energy supplies. However, intensive use of forest biomass is qu- tioned since fundamental ecological processes may be influenced negatively thus making up a trade-off with the benefits of using an otherwise sustainable source of energy. In this book, selected aspects of intensive use of forest b- mass for energy is treated with main focus on ecological aspects like maintenance of soil fertility, recycling of the combustion ash, inf- ence on biodiversity and pests, and economical aspects both at forest owners level and for society. Another focus point is the implemen- tion of this knowledge into decision support, recommendations and guidelines. The geographical scope is mainly the Nordic and Baltic region. The EU-financed project "Wood for Energy, - a contribution to the development of sustainable forest Management" (WOOD-EN- 1 MAN) , make up the frame for the book. Seven partners participated in the project: Forest & Landscape Denmark, Swedish University of Agricultural Sciences, Finnish Forest Research Institute, Norwegian Forest and Landscape Institute, Lithuanian Forest Research Institute, Latvian State Forestry Research Institute, and Estonian University of Life Sciences with Forest & Landscape Denmark as coordinator.

The development of pesticide resistance in arthropod pests, plant pathogens and weeds can be viewed and studied from two contrasting perspectives. At a fundamental level, resistance provides an almost ideal example of adaptation to withstand severe environmental stress. Population geneticists, biochemists and, most recently, molecular biologists have cast considerable light on the nature of this adaptation in diverse taxonomic groups, and on factors determining its selection and spread within and between populations. Unlike most evolutionary phenomena, however, resistance is also of immediate practical and economic significance. Not only has the number of resistant species continued to increase inexorably, but there has been an alarming increase in the severity and extent of some resistance problems. Cases of organisms resisting virtually all available pesticides are by no means uncommon, and pose a formidable challenge in view of present difficulties in discovering and developing novel chemicals. Although most occurrences of resistance were initially monofactorial, resistance now frequently involves a suite of coexisting mechanisms that protect organisms against the same or different pesticide groups, and may even predispose them to resist new, as yet unused chemicals.

This book explores microbial symbiosis, with a particular focus on soil microorganisms, highlighting their application in enhancing plant growth and yield. It addresses various types of bacterial and fungal microbes associated with symbiotic phenomena, including rhizobium symbiosis, arbuscular mycorrhizal symbiosis, ectomycorrhizal symbiosis, algal/lichen symbiosis, and Archeal symbiosis. Presenting strategies for employing a diverse range of bacterial and fungal symbioses in nutrient fortification, adaptation of plants in contaminated soils, and mitigating pathogenesis, it investigates ways of integrating diverse approaches to increase crop production under the current conventional agroecosystem. Providing insights into microbial symbioses and the challenges of adopting a plant-microbe synergistic approach towards plant health, this book is a valuable resource for researchers, graduate students and anyone in industry working on bio-fertilizers and their agricultural applications.

Tropical rain forests are increasingly expected to serve for climate change mitigation and biodiversity conservation amid global climate change and increasing human demands for land. Natural production forests that are legally designated to produce timber occur widely in the Southeast Asian tropics. Synergizing timber production, climate change mitigation and biodiversity conservation in such tropical production forests is one of the most realistic means to resolve these contemporary global problems. Next-generation sustainable forest management is being practiced in the natural tropical rain forest of a model site in Sabah, Malaysian Borneo, while earlier sustainable management practices have generally failed, leading to extensive deforestation and forest degradation elsewhere in the tropics. Ecologists have examined co-benefits of sustainable forestry in the model forest in terms of forest regeneration, carbon sequestration and biodiversity in comparison to a forest managed by destructive conventional methods. Taxonomic groups studied have included trees, decomposers, soil microbes, insects and mammals. A wide array of field methods and technology has been used including count plots, sensor cameras, and satellite remote-sensing. This book is a compilation of the results of those thorough ecological investigations and elucidates ecological processes of tropical rain forests after logging. The book furnishes useful information for foresters and conservation NGOs, and it also provides baseline information for biologists and ecologists. A further aim is to examine the environmental effects of a forest certification scheme as the model forest has been certified by the Forest Stewardship Council. Taken as a whole, this book proves that the desired synergy is possible.

East African forests, among the world's most biologically rich and diverse, are subject to multiple pressures, including insects. As the first work to focus exclusively on East African forest insects, this monograph distils 135 years of scientific and historical literature extending from before the colonial era to the present into an authoritative survey of this region's major pests of trees and wood, as well as their antagonists. This comprehensive treatise also addresses insects of social and economic importance, such as endemics, edible and collectible insects, wild bees and silk producers. It should be of great value to foresters, entomologists, conservation biologists, resource managers, safari outfitters and anyone else interested in the natural history of this fascinating region.

The Global Biodiversity Strategy' signed in 1992 in Rio de Janeiro, and the resolutions at the Ministerial Conferences on the Protection of Forests in Europe in Strasbourg, 1990, and Helsinki, 1993, commit the signatory states to monitor nationally the state of biodiversity and to sustain the characteristic natural variation in the country. Sustainability and long-term planning are the two terms best describing the philosophy of traditional forest management practices. However, the traditional planning techniques are not primarily developed to maintain sustainability of biodiversity. The gap between the international commitments and the practices in forest assessment and management is obvious. This publication presents experience in methodology for assessing and monitoring the variation of ecosystems and habitats in relation to biodiversity conservation and for integrating biodiversity in regional planning of forest management and land use. The state of the art in the field of natural resource assessments with special reference to forest biodiversity is reviewed, progress in integrating data on biodiversity in forest management planning is presented and the information needs regarding biodiversity conservation and the question to what degree assessment methods for forest biodiversity can be simplified for practical applications are discussed. The book is intended for researchers and practitioners in the field of forest and environmental planning and environmental policies.

Recognizing the increased interest in forest management world wide, this book addresses the current knowledge gap by defining sustainable forest management, clarifying methods by which ecological knowledge can be applied and how traditional silvicultural methods can be improved.

Sustainable forest management involves the enhancement of various aspects of forest functions such as conservation of biodiversity, conservation of soil and water resources, contribution to the global carbon cycle as well as wood production. To establish ecological and silvicultural theories to enhance these functions harmoniously, recognizing the relationship between stand structures and their functions is essential.

This volume presents target stand structures for aimed forest functions in relation to stand development stages, as well as ecological and silvicultural methods to lead and maintain them. Ecological and silvicultural strategies are discussed, both on stand and landscape levels, and from local to international levels in temperate and boreal forest zones.

This book presents the state-of-the-art knowledge on bamboo. It starts with an introduction to the plant's biology, its taxonomy, habitat, morphology and growth. The cultivation of bamboo is discussed in terms of silviculture, pests and diseases, and harvesting techniques. The book is completed by a comprehensive presentation of the properties of bamboo, its utilization and its preservation. Bamboo is the fastest-growing and most versatile plant on Earth. For centuries it has played an indispensible part in the daily life of millions of people in tropical countries. In recent decades it has gained increasing importance as a substitute for timber. The book was developed as a reference text for scientists, professionals, and graduate students with a strong interest in this unique plant.

Proceedings of a Seminar on the Practical Applications of Remote Sensing in Forestry, Jonkoping, May 1985, under the Auspices of the Joint FAO/ECE Working Party on Forest Economics and Statistics and the Swedish National Board of Forestry under the Ministry of Agriculture

Micropropagation has become a reliable and routine approach for large-scale rapid plant multiplication, which is based on plant cell, tissue and organ culture on well defined tissue culture media under aseptic conditions. A lot of research efforts are being made to develop and refine micropropagation methods and culture media for large-scale plant multiplication of several number of plant species. However, many forest and fruit tree species still remain recalcitrant to in vitro culture and require highly specific culture conditions for plant growth and development. The recent challenges on plant cell cycle regulation and the presented potential molecular mechanisms of recalcitrance are providing excellent background for understanding on totipotency and what is more development of micropropagation protocols. For large-scale in vitro plant production the important attributes are the quality, cost effectiveness, maintenance of genetic fidelity, and long-term storage. The need for appropriate in vitro plant regeneration methods for woody plants, including both forest and fruit trees, is still overwhelming in order to overcome problems facing micropropagation such as somaclonal variation, recalcitrant rooting, hyperhydricity, polyphenols, loss of material during hardening and quality of plant material. Moreover, micropropagation may be utilized, in basic research, in production of virus-free planting material, cryopreservation of endangered and elite woody species, applications in tree breeding and reforestation.

As forests decline in temperate and tropical climates, highly-developed countries and those striving for greater economic and social benefits are beginning to utilize marginal forests of high-latitude and mountainous regions for resources to satisfy human needs. The benefits of marginal forests range from purely aesthetic to providing resources for producing many goods and services demanded by a growing world population. Increased demands for forest resources and amenities and recent warming of high latitude climates have generated interest in reforestation and afforestation of marginal habitats in cold regions. Afforestation of treeless landscapes improves the environment for human habitation and provides for land use and economic prosperity. Trees are frequently planted in cold climates to rehabilitate denuded sites, for the amenity of homes and villages, and for wind shelter, recreation, agroforestry, and industrial uses. In addition, forests in cold climates reduce the albedo of the earth's surface in winter, and in summer they are small but significant long-lived sinks for atmospheric carbon dioxide. Finally, growth and reproductive success of forests at their geographic limits are sensitive indices of climatic change. As efforts to adapt forests to cold climates increase, however, new afforestation problems arise and old ones intensify. Austral, northern, and altitudinal tree limits are determined by many different factors. Current hypotheses for high-latitude tree limits are based on low growing-season temperatures that inhibit plant development and reproduction."

Planted forests, from irrigated eucalypts in Brazil to Douglas-fir seedlings in the mountains of Oregon, are described and discussed by international experts. The varieties, purposes, forms, and ecological, economic and social aspects of planted forests are considered in technical details and in case studies from temperate and tropical regions of the world.

The introduction of chain saws and tractors in the early 1950's marked the beginning of a change in tree harvesting techniques from the old manual methods to mechanized operations. It was followed by a rapid evolution both technically and systematically. Hence, the requirements for improved know ledge of operational efficiency also increased. Changing relations between Man, machines and environment brought about new experiences and awareness of a physiological and ergonomic nature. Improved knowledge of both machine technology and planning of work on a small or large scale has grown increa singly important for an efficient utilization of expensive machines and other equipment. The need for a textbook on tree harvesting techniques including expe riences made in recent years is enhanced. The book presented here is prima rily based on lectures given on the subject of Forest Techniques at the Faculty of Forestry at the Swedish University of Agricultural Sciences and after modifications also at the University of Nairobi (Kenya). Thus, the book is written primarily for students at the faculties and institutes of forestry. However, it is also useful for persons actively occupied in forest operations. The presentation of this book in its original Swedish version in 1972 created a considerable interest in the preparation of a condensed edition in English. Thus interest has been expressed in Finland, Norway, Holland, Canada, U.S.A., Brazil, Japan, Poland, Scotland and Yugoslavia."

This book provides up-to-date information on the environmental impact of transgenic trees on genetically modified tree (GMT) communication strategy. It is useful to public/private organisations as well as to private and public research bodies and universities worldwide since it reports on the global status of GMT research and policy. A high number of genetically modified trees (GMTs) with altered or novel characteristics have been produced in the last 15 years. However, their very low public acceptance is a basic problem in their commercialization. Breeders anticipate economic and ecological benefits, like reduced product costs and less pressure on native forests, while opponents fear risks, such as unintended spread of GMTs. But what is true? To answer this question, the COST Action FP0905 focused on key aspects related to GMTs: (a) biological characterization; (b) assessment of possible environmental impacts; (c) socio-economic implications and public acceptance/concerns; (d) providing science-based information to communicate with the public.

While restoration ecology has traditionally aimed to re-create some putative more 'natural' ecological state, forest landscape restoration (FLR) has emerged over the last decade as an approach aimed more at restoring natural functions, while focusing on meeting human needs. With a view to exploring the practical potential of this approach, this book draws together a team of experts from the natural and social sciences to discuss its success so far in addressing critical issues such as biodiversity, ecological function, and human livelihoods. Applying principles of landscape ecology, restoration ecology, planning theory and conflict management, the book presents a series of case studies which document the approach, and discusses how the approach can help with priority setting for the future. The book will provide a valuable reference to graduate students and researchers interested in ecological restoration, forest ecology and management, as well as to professionals in environmental restoration, natural resource management, conservation, and environmental policy.

Jointly published with INRA, Paris.Pesticide resistance is becoming more frequent and widespread with more than 500 insect species known to have become resistant to synthetic insecticides. On the other hand, consumers increasingly demand agricultural products without any pesticide residues. This book, for the first time, shows the alternative: solely physical methods for plant protection by means of thermal, electromagnetic, mechanical and vacuum processes. A glossary rounds up this extremely valuable book.

Losses of forests and their insect inhabitants are a major global conservation concern, spanning tropical and temperate forest regions throughout the world. This broad overview of Australian forest insect conservation draws on studies from many places to demonstrate the diversity and vulnerability of forest insects and how their conservation may be pursued through combinations of increased understanding, forest protection and silvicultural management in both natural and plantation forests. The relatively recent history of severe human disturbance to Australian forests ensures that reasonably natural forest patches remain and serve as 'models' for many forest categories. They are also refuges for many forest biota extirpated from the wider landscapes as forests are lost, and merit strenuous protection from further changes, and wider efforts to promote connectivity between otherwise isolated remnant patches. In parallel, the recent attention to improving forest insect conservation in harmony with insect pest management continues to benefit from perspectives generated from better-documented faunas elsewhere. Lessons from the northern hemisphere, in particular, have led to revelations of the ecological importance and vulnerability of many insect taxa in forests, together with clear evidence that 'conservation can work' in concert with wider forest uses. A brief outline of the variety of Australian tropical and temperate forests and woodlands, and of the multitude of endemic and, often, highly localised insects that depend on them highlights needs for conservation (both of single focal species and wider forest-dependent radiations and assemblages). The ways in which insects contribute to sustained ecological integrity of these complex ecosystems provide numerous opportunities for practical conservation.

This book is intended to be a record of the Biotechnology-Assisted Re/Afforestation Project in the Asia-Pacific Region (BIO-REFOR) since 1992, conducted in coop eration with the International Union of Forest Research Organizations (lUFRO). The purpose of the project is to promote exchanges of information of fundamental research on indigenous species in the Asia-Pacific Region in order to restore natural forests. The production, cultivation, and maintenance of forest tree species provide highly sustainable production systems that conserve soils, the microenvironment, and biodiversity The key technology for biomass production of forests is propagation via micropropagation or traditional propagation. However, there are many recalci trant species among useful forest trees to be propagated in large numbers. Recent advances in mycorrhizal technology and in vitro culture have made it possible to commercially propagate useful trees for re/afforestation. In this book, comprehensive information is provided on propagation, mycor rhizal inoculation, and reforestation of economically and environmentally impor tant forest trees, information that usually is available only in widely scattered re sources. Here, we include a wide area of the ecology and physiology of dipterocarps as a general overview, and then cover propagation techniques, mycorrhizal symbio sis, man-made forests, and biodiversity in the Asia-Pacific region.

One of the major challenges facing humankind is to provide an equitable standard of living for this and future generations: adequate food, water and energy, safe shelter and a healthy environment. Human-induced climate change, and increasing climate variability, as well as other global environmental issues such as land degradation and loss of biological diversity, threaten our ability to meet these basic human needs. It is undisputed that the last two decades have been the warmest this century, and likely to be the warmest for the last 1000 years, sea level is rising, rain and snowfall patterns are changing. Arctic sea ice is thinning and the frequency and intensity of El-NiAo events appear to be increasing. In addition, the frequency of extreme events is rising and many parts of the world have recently suffered major heat-waves, floods and droughts leading to significant loss of life and economic costs. This requires the global community to give urgent attention to addressing key issues. The range of adaptation options for agriculture and forestry is generally increasing because of technological advances, thus reducing the vulnerability of these systems to climate change. However, some regions of the world, particularly developing countries, have limited access to these technologies. Agriculture and forestry are currently not optimally managed with respect to todaya (TM)s natural climate variability. Decreasing the vulnerability of agriculture and forestry to increasing climatic variability will go a long way towards reducing the long-term vulnerability to climate change. This book represents a major step in assessing the science of climate variability and change, and their likelyimpacts on agriculture and forestry, with clear adaptation strategies required to reduce their vulnerability.

It is our conviction - based on many years of teaching and practical experience - that professional skill in forestry will develop more rea dily and more efficiently if forestry students are presented with a clear understanding, at an early stage, of the impact of the physical factors that both enhance and inhibit forestry activities. Tnis know ledge is best aquired by adressing the physical world of forestry with a set of analytical tools through which an almost infinite number of variables can be listed in order, be measured and their interaction be explored and resolved. This is the main purpose of this joint effort, presented in two volumes, Part I and Part II. Part I is analytic, written as a basic text for undergraduates in cour ses such as logging, transport, forest engineering and even forest ma nagement. It deals with the fundamentals of technology in forestry as determined by the physical environment. Briefly it can be visualized as the application of forestry wi thin the parameters: space, time and energy. Forestry is a process with a long time horizon. Free solar energy creates biomass which, with the aid of other forms of energy, is converted into products and services. A knowledge of the dependecies and interactions is indiGpensible for the forestry profession. The analytic approach serves two purposes: to bring about a clear un derstanding of the real world of forest and to develop tools through which efficiency and productivity can be explored and improved."

Systems analysis in forestry has continued to advance in sophistication and diversity of application over the last few decades. The papers in this volume were presented at the eighth symposium in the foremost conference series worldwide in this subject area. Techniques presented include optimization and simulation modelling, decision support systems, alternative planning techniques, and spatial analysis. Over 30 papers and extended abstracts are grouped into the topical areas of (1) fire and fuels; (2) networks and transportation; (3) forest and landscape planning; (4) ecological modeling, biodiversity, and wildlife; and (5) forest resource applications. This collection will be of interest to forest planners and researchers who work in quantitative methods in forestry.

After the 1986 and 1989 volumes, this is the third volume on biotechnology for propagation of trees. Comprising 28 chapters contributed by international experts the book deals with fruit, ornamental, and forest trees, such as Black cherry, Sour cherry, Pomegranate, Loquat, "Ficus," Yellow poplar, Horse chestnut, Judas tree, Linden tree, Saskatoons, Taiwan sassafras, Plane-tree, Rattans, Bamboos, Engelmann spruce, White spruce, Larches, Hinoki cypress, Western redcedar, and various types of pines, i.e. Jack, Carribean, Eldarica, Slash, Egg-cone, Maritime, Ponderosa, Eastern white, Loblolly pine. Trees III is an excellent reference book for scientists, educators, and students of forestry, botany, genetics, and horticulture, who are interested in tree biotechnology.