Features:
Extra thin cement is very useful for plastic model assembly as it can be flowed into areas like small gaps between plastic parts and does not leave marks when dried. This cement contains limonene extracted from citrus fruits which make it very safe to use with no unpleasant smells.
- The bottle's cap comes with a convenient brush.
- 1 bottle contains 40ml of cement.

Tamiya Acrylic Model Paint paints are made from water-soluble Acrylic Model Paint resins and are excellent for either brush or spray painting. These paints can be used on styrol resins, styrofoam, wood, plus all the common model plastics. The paint covers well, flows smoothly with no blushing or fading, and can be blended easily. Each bottle contains 23ml.

This high quality brush with easy to use performance is made of fine horse hair from Chinese and American horses. Off-white coloured bristles with natural wood coloured handle and burgundy imprint, as well as plastic ferrule. This brush would better be used for painting detailed areas.

Tamiya Colour bottled Lacquer Paints are highly versatile - whether using them to airbrush large areas, or pick out fine details with a brush, their stunning, consistent tones add superlative realism to your model. Their tough membrane suits them ideally to use as a basecoat, resistant to enamel paints, while swift drying times ensure an efficient painting process. A dedicated thinner is available.

- Colours may vary slightly from Tamiya Colour Acrylics and Sprays with the same name.
- Bottle contents: 10ml

Tamiya Panel Line enamel paints are ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted into the ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be cleaned up by using enamel thinner. (Bottle contains 40ml)

Examples of use:
Black is a general-purpose color and can be used for any type of model. Brown is great for military models as well as highlighting details on bright colors such as Yellow or Orange. Gray is perfect for White or Light Gray parts where Black may be too distinct.

Note:
Plastic parts may become brittle when using Tamiya Panel Line accent colors. Avoid using on movable parts and take care when applying to load-bearing areas. Apply over base coat of lacquer or acrylic paint. Accent Color paints may damage underlying base coat. Test before applying it onto the model. Take care when applying on flat base coat colors as Accent Color paints may permeate more readily.

.

The VW Transporter is back! When VW started mass production of the legendary Volkswagen Type 2 - better known in Germany as the 'Bulli', the hippie van or the VW microbus - in 1950, they could not have imagined that its success story would reach this far into the future. The VW Transporter is a street icon and remains a dream vehicle for many car fans even today. The camper van version, in particular, is the epitome of freedom, adventure and the urge to venture into the great unknown. The cardboard model The VW Transporter kit brings the camper van version of the T2 into your home and onto your desk in the form of a 38-piece cardboard model. The most remarkable features of this lovingly designed model are the detailed interiors and the pop-top. Real 50s flair! It takes just about an hour and not a single drop of glue to build a VW Transporter for your desk. The companion book The high-quality companion guide contains a step-by-step construction manual for your cardboard model. In addition to that, you'll get a wealth of background information on the history and technology of the famous VW Transporter, as well as extensive images to provide you with real insight into the world of camping in the 50s and 60s.

These spray paints are especially developed for finishing aircraft models to provide the authentic tones. Each can contains 100ml of paint. The paint is a synthetic lacquer that cures in a short period of time

Tamiya spray paints are not affected by acrylic or enamel paints. Therefore following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints.

Revolutionary Light-Curing Putty to speed-up finishing time!
For any busy modeler
Putty cures rapidly once exposed to a direct light source.

Unbelievable curing time
The Light-Curing Putty will cure in approx. 1 minute when exposed to direct sunlight, or in approx. 2 minutes under fluorescent light (27W).

Easy to handle one-component putty
The Light-Curing Putty is a one-component putty so does not require any curing agent, realizing very easy usability. Consisting of a smooth paste property, the putty is easy to apply to all surfaces.

Does not shrink during curing
Compared to conventional polyester based putties, the Light-Curing Putty displays almost no shrinking when drying.

Realizes excellent workability after curing
After completely curing, the Light-Curing Putty realizes easy cutting, trimming and filing, ensuring to obtain a smooth surface.

Can be painted over with plastic paints
After curing, the Light-Curing Putty can be easily painted over with plastic paints.
*Original color: Yellow, Net: 34g
(aluminum tube)
The followings outline some points and tech-tips on the Light-Curing Putty in Q&A form.

Q : Will the Light-Curing Putty be cured under UV light?
A : No. The putty will be cured when exposed to sunlight or fluorescent light. So it does not require any special lighting device. It is not recommended to use any light device that generates high heat such as an incandescent lamp because it may cause air bubbles in the putty.

Q : Is it possible to apply the Light-Curing Putty thickly?
A : Yes. However, it is best to do this in separate layers. Apply the putty in layers of 2mm thickness, this makes sure the light can penetrate through to the bottom. By applying another 2mm layer of putty after the under layer has dried, you can obtain your desired thickness. Different types of putty can also be applied over the top of a layer of Light-Curing Putty.

Q : Will the Light-Curing Putty cure under standard room lights?
A : The Light-Curing Putty will not cure quickly under an indirect light source such as standard room lights. When working with the putty, avoid direct sunlight and turn off any lights focused on your working area. It is not recommended to cure the putty under room lights alone as the putty may not cure completely.

Q : What's the best way to store the Light-Curing Putty?
A : After once opening the tube, tighten the cap and store the tube in the light shielding bag (included with putty). Then store in a cool shaded area.

Q : Does the Light-Curing Putty affix to the surface securely?
A : Consisting of a smooth paste property, the putty easily affixes to most surfaces. To ensure the putty fixes securely, it is recommended to rough-up the surface in advance using sand paper (#180-#400).

Q : How hard will the Light-Curing Putty become after curing?
A : The putty retains a smooth finish even after completely drying, ensuring easy workability. It will harden slightly softer than usual plastic (polystyrene) parts.

Q : Any other cautions?
A : After the Light-Curing Putty dries, the surface may become slightly greasy. It can be easily removed by wiping off using a soft cloth moistened with Tamiya Lacquer Thinner with, or sanding down using Tamiya Finishing Abrasives.

In 1948, one of the many problems facing the new Jewish state of Israel was a total absence of armoured fighting vehicles, and the restrictions applied to nations who had tanks, but were refused the ability to sell them outside of their own countries, made the situation for Israel almost hopeless in obtaining any. They managed to get some derelict Sherman tanks that were going to be scrapped and a few armoured cars, but the number obtained was insufficient for the creation of a viable force. It was these conditions that eventually led to the to the development of today's impressive Merkava line.

Following the cease fire of the 1948 war, several dozen Sherman tanks, of all types were purchased from all over the world and standardized on a production line set up in Israel, and designated the M-50 Sherman. Later, they were able to purchase the British Centurion tank which went on the same production line for rebuild to their own specifications. The country was still dependent upon other countries products for their armour needs, and often, due to situations beyond the control of Israel, they were denied shipments of requested items. The production line was receiving requests for modifications of M48 Patton tanks as well as Soviet T54 and T55's. Following the six day war, General Israel Tal felt an urgent need for self-sufficiency in major weapons such as aircraft and tanks, due to the serious cutbacks in re-supply from leading nations. He became obsessed by the idea of building tanks in Israel, and although backed by some military experts, he was regarded with some suspicion and doubt by many others. Here, with feverish ardour and imagination General Tal started the venture which in nine years produced the remarkable Merkava.

The Merkava is manned by a crew of four and its main armament is the 105mm M64 L71A tank gun, with secondary armament of a 7.62mm co-axial machine gun located in a vertical armoured slit in the turret and two additional LMG's on the commanders hatch and the loaders hatch, these are used for close-in combat and against low-flying aircraft. The driver is located to left of the power pack and can enter the rear compartment by lowering his seat back. The fighting compartment extends the whole width of the hull and is air-conditioned for crew comfort in the desert environments it was designed to operated in. Engine is a Teledyne Continental AVDS-1790 V-12 Diesel which produces 900hp.

Operating in the Southern deserts, the Merkava crews enjoy hitherto undreamed of comforts. Cooled water from a container installed at the rear provides water for drinking through a special pipe into the turret. In hot weather this is an absolutely vital necessity, making all the difference in the fighting capability of the crew. With the troop carrying capability, via the large rear door, the Merkava is truly one of the most modern and versatile armoured systems in the world and was extensively proven in the field of combat against the highly touted T-72 Soviet armour used in the recent Lebanon conflict.

Tamiya Acrylic Model Paint paints are made from water-soluble Acrylic Model Paint resins and are excellent for either brush or spray painting. These paints can be used on styrol resins, styrofoam, wood, plus all the common model plastics. The paint covers well, flows smoothly with no blushing or fading, and can be blended easily. Each bottle contains 23ml.

ROKR Bulldozer Engineering Vehicle 3D Wooden Puzzle TG509K

Build a bulldozer model with your own hands. This 3D wooden puzzle is designed based on real bulldozers.

Robotime-ROKR Bulldozer 3D wooden puzzle TG509K is an exquisite and fun-to-play truck toy based on real engineering vehicles. With high quality and great details, you will be able to enjoy a wonderful self-assembling experience at home with this amazing vehicle kit!

This wooden Bulldozer model 3D puzzle uses laser cutting technology to provide a smooth building experience. The realistic and functional details of the truck can enhance your children’s playtime and keep them involved for hours.
It can simulate the real bulldozer that helps build kids’ imagination, making them familiar with the real engineering vehicles.

This engineering vehicle model kit can be given as a gift to kids, teens or a mechanical engineer. It can be placed on a desk or an office as a cool decoration.


Difficulty Level:★★☆☆☆☆
Assembly Time: About 2.5h
Package Size: 152.5*228.5*13mm
Assembly Size: 180*65*90mm


FRONT-END LOADER
It replicates the Front-end Loader with eco-friendly raw materials and pre-colored pieces, which can be built easily. This can help you appreciate the complex mechanisms that make these machines work.


Engineering Vehicles Story
With high quality and great details, you will be able to enjoy a wonderful self-assembling experience at home with this amazing vehicle kit! Building a model can be a fun and engaging activity that helps keep your interest and curiosity. It can also be a great way to bond with friends and family members who are also interested in engineering.

Once you’ve completed your model, you can proudly display it in your home or office. This can be a great conversation starter and can showcase your interests and skills.

Tamiya Acrylic Model Paint paints are made from water-soluble Acrylic Model Paint resins and are excellent for either brush or spray painting. These paints can be used on styrol resins, styrofoam, wood, plus all the common model plastics. The paint covers well, flows smoothly with no blushing or fading, and can be blended easily. Each bottle contains 23ml.

Rolife DIY Miniature House - Cozy Kitchen DG159

Cozy, classic kitchen with rich details and charming lighting.

Welcome to Rolife Cozy Kitchen miniature house DG159. It is a kitchen full of warmth, with a classic layout, rich details, and charming lighting. What kind of host do you imagine lives here? Maybe he or she is good at baking all kinds of bread and roasts in the oven to fill the days; or maybe there is a sense of satisfaction just looking at these lovely pots and pans, listening to the sound of cups and dishes clashing, the rustling of chopped vegetables, and smelling the aroma of ingredients rising up after being put into the pot!

Build this miniature kitchen scene with your hands and enjoy a wonderful DIY experience.

Assembly Time: 10H
Scale 1:20

*Note: Due to customs policy, glue and battery(AAA*2) may not be included in the package. Glue: you could use eco-glue, wood glue, or strong glue.

Enamel paints are used for brush or spray painting, and can be applied to almost any surface of wood, metal or plastic.Each bottle contains 10ml of paint.

Features:
- These enamel paints are ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted into the
ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be cleaned up by using an enamel thinner.

This tool is designed to remove scale model plastic parts from the parts sprue. The sharp jaw blades offer an excellent cutting edge, and they have a slightly slimmer jaw than previous Tamiya plastic cutter products, enabling easier removal of smaller parts which have less clearance.

Length: 115mm.
Easy-to-use tool features slim jaw with an excellent balance of durability and cutting edge.
PVC grip covers ensure that the side cutters stay firmly in your hand during use.

The Robotime 3D wooden puzzle is a Tramcar model which is handcrafted by yourself. This Tramcar has a dreamy outlook with delicate details. It will be the best home decor and present for your family and friends
It is the creative 3D wooden puzzle designed for adults and teenagers. We select the most popular model as main product this quarter. Compared with former products, this series is more complex and exquisite.

Probably Take Time: 1.5 hours

Product information

• Assembly size: 180x58x140mm
• Package size: 241x153.5x14.5mm
• Wood parts: 145pcs
• Material: 2mm Linden Plywood

Tamiya Panel Line enamel paints are ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted into the ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be cleaned up by using enamel thinner. (Bottle contains 40ml)

Examples of use:
Black is a general-purpose color and can be used for any type of model. Brown is great for military models as well as highlighting details on bright colors such as Yellow or Orange. Gray is perfect for White or Light Gray parts where Black may be too distinct.

Note:
Plastic parts may become brittle when using Tamiya Panel Line accent colors. Avoid using on movable parts and take care when applying to load-bearing areas. Apply over base coat of lacquer or acrylic paint. Accent Color paints may damage underlying base coat. Test before applying it onto the model. Take care when applying on flat base coat colors as Accent Color paints may permeate more readily.

These spray paints are especially developed for finishing aircraft models to provide the authentic tones. Each can contains 100ml of paint. The paint is a synthetic lacquer that cures in a short period of time

Tamiya spray paints are not affected by acrylic or enamel paints. Therefore following the painting of the entire assembly, details can be added or picked out using enamel and/or acrylic paints.

This high quality brush with easy to use performance is made of fine horse hair from Chinese and American horses. Off-white coloured bristles with natural wood coloured handle and burgundy imprint. This brush would better be used for painting smaller sized areas.

Rolife Super Creator Golden Wheat Bakery Plastic DIY Miniature House Kit DW005

You must be starving after a busy day! Welcome to Golden Wheat Bakery. Here we offer you the best bread and dessert in the neighborhood. Come and enjoy this one-of-a-kind deliciousness!

Golden Wheat Bakery DW005 is a plastic DIY miniature house rom Rolife Super Creator - Super Store Series. This adorable bakery offers fresh and tasty bread and dessert that you'll love, especially our signature bagels, berry tarts and white cake, which are popular among our customers. You don't want to miss it! Have fun building & playing with this amazing bakery store miniature dollhouse!


Assembly Time: 60min
Assembled Size: 163*163*152mm


Golden Wheat Bakery is a plastic miniature house to replicate a bakery scene in real life. There are many detailed finished food toys to make the assembly easy and quick. With easy insertion design, a finished bakery can be made in about 1 hour. Also, it can be assembled with other houses in various shapes.

Susie runs a bakery store on the street. After a busy day, she was sleeping soundly. Somehow she found herself become a loaf of bread. She laid on a bread tray and immersed herself in the aroma of the oven-fresh bread. She felt like she was drooling if bread could do that. Obviously, she was not the only one that was attracted by the aroma. At this time, a hungry customer walked in and bought her. After paying money, he was going to take a big bite. “No!”. Susie screamed and woke up. It was a dream! Susie laughed aloud and began to prepare for another new day.

In the ordering area, there is a menu made up of stickers so that you can assemble this part quickly. In the center of this bakery, a transparent bread cabinet is placed here with various kinds of bread toys on it. They make the bakery store more real and fun.

There is an oven with warm-colored LED light to add play experience to increase the play experience. When you open the oven door and turn on the light, you will feel that you are really baking now. Beside it, there is a counter for putting cooking utensil.