Trustfire MINIX white + red / UV light multi-purpose key light
Max lumens 320LM Max Beam distance  86m Dual light source design, one light for multiple uses

Available in four colors, each light is paired with two light sources, white + red light or white + UV light.

Cool black (white + red light), diamond blue (white + red light), the ultimate gray (white + UV light), luxury purple (white + UV light) Red light source, long range, strong penetration

MINI X uses 620nm wavelength red light source, strong penetration, suitable for warning lighting, early warning emergency, signal distress, and the effect of mosquito repellent. Warning lighting, early warning and emergency

Walk alone in the dark, turn on the red light mode, play a warning lighting, early warning emergency, etc., 620nm has a strong penetrating power, can be quickly discovered by teammates.
Wilderness survival necessary signal distress light Wilderness survival necessary signal distress light

In case of danger, turn on the MINI X red flashing mode in time to send SOS distress signal; MINI X with 3.7V 300mAh lithium polymer battery, red flashing up to 9 hours, the necessary flashlight for wilderness survival. Camping in the wild. Red light repels mosquitoes

When camping in the wild, the MINI X's red light also has a mosquito-repelling effect, repelling mosquitoes from the tent and keeping them away from bites.

Too many mosquitoes, can't sleep at all

MINI X's red light repels mosquitoes, so you can sleep through the night. MIN X uses 365nm wavelength UV light source

UV light is also called UV light source, UV light wavelength range in 200-400nm, 365nm wavelength belongs to the long-wave UV.

Bacteria detection

365nm is widely used to detect ringworm, acne, ringworm of the head, ringworm of white, ringworm of flowers, ringworm of red, ringworm of axillary hair; certain pigmented lesions such as chloasma, age spots, coffee spots, etc., as well as neurofibroma, skin tumors, vitiligo, etc. All are commonly used in dermatology.

Fluorescent agent detection

365nm ultraviolet light, in clean objects, irradiation shows white, only in the object fluorescent agent, shows blue; many products in life and fluorescent agent, are harmful to the human body, we can detect through MINI X, for example: diapers, saliva wipes, shoes, clothing, paper towels, toys, blankets, masks, lotions, nail polish, laundry detergent, face wash, sanitary napkins. etc. can be tested for the presence of fluorescent agents. Banknote inspection

365nm ultraviolet light can also detect the authenticity of banknotes; when collecting money and making change, shine a light at any time to avoid receiving counterfeit money.
Animal skin testing & Bathroom bacteria detection
Diaper fluorescent agent detection
& Mask fluorescence agent detection YPE-C fast charging

Charging instructions.
1. Turn off the flashlight, remove the waterproof cap on the side of the flashlight, and insert the Type-C interface of the charging cable into the charging socket of the flashlight.
2. When the flashlight receives a charging signal, the charging indicator will light up in red, and turn to green when the flashlight is fully charged.
3. After charging operation, you should unplug the charging cable and press the waterproof cover back tightly to ensure the waterproof performance of the flashlight, and then you can use the flashlight normally.   One-button operation

Single button independent control, can control the flashlight switch, white light intensity regulation, can switch to red light / UV light, red light / UV light flashing, also can lock the flashlight switch to prevent accidental touch.

Long press the switch for 0.5s to turn on/off the flashlight

Change modes

White light mode: click the switch to switch modes in sequence of moonlight mode → low mode → middle mode → high mode.
Red light mode and purple light mode: click the switch to switch modes in sequence of red light mode/purple light mode → red flashing/purple flashing.
◎ Memory Mode
When the flashlight is in any mode under white light mode, it will automatically memorize the current working mode. After it is turned off, it will start to work in the current memory mode.
Lock: When the flashlight is turned off, double click the switch quickly to enter lock mode, the flashlight will flash twice and then enter lock mode.
Lock: When the flashlight is turned off, double click the switch quickly to enter lock mode, the flashlight will flash twice and then enter lock mode. Power indicator
When the flashlight is turned off, please touch the top switch and you will see the power indicator lights up and go out automatically after 2 seconds. Different colors show different remaining battery power, the corresponding relationship is as follows:

Green: 80%-100% Yellow: 20%-80% Red: 5%-20% Red flashing: 1%-5% IP66 level of protection
Up to 6 levels of dust- proof, completely prevent dust from entering, 6 levels of waterproof, can be used in rainy days. Product parameters

Mode，moonlight， Low ，Middle,  Red light/UV 
Brightness ,Runtime,Beam distance ,Candela,Impact Resistance,Waterproof,Additional Functio
Intelligent temperature control, low voltage warning,battery power indicator, Type-C rechargeable,  Short circuit protection.
Note: The above parameters are only approximate values, Tested in a laboratory environment. The value may change with changes in the use environment. 1. Using the international patent latest generation LED, life of 50000 hours.
2. Dual light source EDC flashlight, one-key dimming.
3. Max 320 lumens brightness and 86 meters longest beam distance.
4. Built-in 300mAh lithium polymer battery support Type-C charging directly.
5. Support 1 lumen moonlight mode, with memory modefunction.
6. With low voltage warning and intelligent temperature control downshift/step-down function
7. The shell is made of aviation aluminum alloy CNC finishing, and the surface is with anodized hard oxidation treatment.
8.size:51.8mm*24.5mm*12mm
9.Net weight: 22.5g
10.The 365nm band UV light source has a wide range of uses. The 620nm band red light source with strong penetrating power, suitable for a variety of scenes.

BATTERY OPTION:
1. Internal battery with side USB charging
2. 3x 21700 battery in magazine (no charger)
3. 3x 21700 battery in magazine (Incl TF TR-018 charger)
Features
LED OPTION
- Option1: Utilizes 8x CREE XHP70.2 LEDs (6500K) with a max output of 41,500 lumens
              Maximum beam intensity of 160,000 cd, and maximum throw distance of 800 meters
- Option2: Utilizes 8x CREE XHP70.2 LEDs (5000K) with a max output of 39,425 lumens
              Maximum beam intensity of 144,400 cd, and maximum throw distance of 760 meters
- Option3: Utilizes 8x LUMINUS SFT40 LEDs (6500K) with a max output of 20,000 lumens
              Maximum beam intensity of 360,000 cd, and maximum throw distance of 1,200  meters
Integrated precision digital optics technology provides extreme reflector performance
Utilizes dual-sided AR coated, 99% transmittance toughened glass lens
A step-down constant current circuit design with an efficiency rate up to 98%

Buil-in 10.8V / 4200mAh li-ion battery pack (made by 3x 3.6V/4200mAh 21700 battery cells) or
Power by 3x high drain 21700 batteries

Fast USB Type-C charging with discharging function available (not in 3x 21700 battery option)
Build in battery Features
1.8 hours for full charging, 1.5 hours for full charging over 90% 
Built-in intelligent adaptive charging and discharging function and protocols of QC3.0 & PD3.0
With advanced intelligent temperature regulation module, MK38 regulates its output and adapts to the ambient environment, maintaining optimal performance
Electronic reverse polarity protection and over-discharge protection
Integrated power indicator under the side switch indicates remaining battery voltage
Integrated indicator near USB-C port indicates the status of charging & powerbank discharging
Multi-switches design, clear division:
- Stainless steel side switch control the light to turn on/off and change modes etc
- Front switch on handle control 2x waterproof cooling fans to turn on/off
- Rear switch on handle control the light to turn on/off and change modes etc
User interface is simple and friendly, easy one-hand operation:
- From OFF, long press to ECO modes.
- From OFF, single press to General modes.
- Double click to Turbo from any modes (except LOCK-OUT)
- From OFF, quick triple click to Special modes (Strobe / Beacon / SOS to select)
- From OFF, quick quadrple click to lock-out the light
CNC machined from durable aircraft-grade aluminum alloy
Surface finish (option): Premium type-III hard-anodized or Micro-arc oxidation
Stainless steel strike bezel is used to break windows in an emergency situation
Triple-interface on flashlight head: Stainless steel side switch, UNC1/4" triple hole, waterproof 4PIN connector socket
Built-in UNC1/4" tripod hole, MK38 can be directly mounted to a tripod, turning it into a camp light or a fixed supplementary light
Utilizes stainless steel side switch with CD pattern surface for good touch feelings
Detachable handheld handle meets various lighting demands
Triple-sided premium cooling fins improve heat dissipation performance
Built-in double-row cooling fans on the handle to blow effectively cooling fins through outside
Convenient tail-stand capacbility
IPX-7 waterproof standard (1 meters under water)
Impact resistant to 1 meter
What's package Included?
1x Manker MK38 flashlight (built-in battery pack or 3x 21700 as per top selection)
1x Detachable handle
1x USB Type-C cable (build in battery option)
1x Super charging adapter (Plug option: European) (build in battery option)
1x Quick release screw
1x Stainless steel tag tool
1x Lanyard
1x User manual Technical Data
MK38 with 8x CREE XHP70.2 LEDs 6500K:
Modes/Level                                                           Luminance             Runtime
Turbo mode - Turbo level (Thermal regulation):        41,500 lumens        1 hours 30 minutes
General mode - High level (Thermal regulation):       20,000 lumens        1 hours 40 minutes
General mode - Mid3 level (Thermal regulation):       10,000 lumens        1 hours 50 minutes
General mode - Mid2 level:                                     5,000 lumens        2 hours 20 minutes
General mode - Mid1 level:                                     2,200 lumens        5 hours
General mode - Low level:                                      1,000 lumens       10 hours
ECO mode - L4 level:                                                400 lumens       20 hours
ECO mode - L3 level:                                                180 lumens       28 hours
ECO mode - L2 level:                                                 80 lumens        50 hours
ECO mode - L1 level:                                                 40 lumens        66 hours
Special mode - Strobe:                                        25,000 lumens         -
Maximum light intensity: 160,000 cd
Maximum beam distance: 800 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
MK38 with 8x CREE XHP70.2 LEDs 5000K:
Modes/Level                                                            Luminance               Runtime
Turbo mode - Turbo (Thermal regulation):                39,425 lumens          1 hours 30 minutes
General mode - High level (Thermal regulation):       19,000 lumens          1 hours 40 minutes
General mode - Mid3 level (Thermal regulation):         9,500 lumens          1 hours 50 minutes
General mode - Mid2 level:                                      4,600 lumens          2 hours 20 minutes
General mode - Mid1 level:                                      2,090 lumens          5 hours
General mode - Low level:                                          950 lumens        10 hours
ECO mode - L4 level:                                                 400 lumens        20 hours
ECO mode - L3 level:                                                 180 lumens        28 hours
ECO mode - L2 level:                                                   80 lumens        50 hours
ECO mode - L1 level:                                                   40 lumens        66 hours
Special mode - Strobe:                                          23,750 lumens          -
Maximum light intensity: 144,400 cd
Maximum beam distance: 760 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
MK38 with 8x LUMINUS SFT40 LEDs 6500K:
Modes/Level                                                               Luminance          Runtime
Turbo mode - Turbo (Thermal regulation):                 20,000 lumens         2 hours
General mode - High level (Thermal regulation):        10,000 lumens         2 hours 15 minutes
General mode - Mid3 level (Thermal regulation):          5,000 lumens         2 hours 30 minutes
General mode - Mid2 level:                                       2,500 lumens         3 hours
General mode - Mid1 level:                                       1,300 lumens         6 hours
General mode - Low level:                                           650 lumens       12 hours
ECO mode - L4 level:                                                  320 lumens       22 hours
ECO mode - L3 level:                                                  160 lumens       33 hours
ECO mode - L2 level:                                                    80 lumens       50 hours
ECO mode - L1 level:                                                    40 lumens       66 hours
Special mode - Strobe:                                           12,000 lumens         -
Maximum light intensity: 360,000 cd
Maximum beam distance: 1,200 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
More information, please check the table on the photo as belows:
(* Note: You can open this photo in new tab on your Google chrome to enlarge.). Note: The front switch on the handle can turn on/off the cooling fans. The stailess steel side swtich on flashlight head and the rear switch on the handle can control flashlight ON/OFF, mode operation etc.
Cooling Fan Operation
ON/OFF: In any state (except LOCK-OUT), single click the front switch on the handle to turn on 2x cooling fans. A single click after this turns the fans OFF.
△ Note: When the light is ON, Single click side switch (or rear switch) also to turn off the cooling fans.
Mode Operation
ON/OFF: When the light is OFF, any click the side switch (or the rear switch) to turn the light ON. When the light is ON, just single click the side switch (or the rear switch) to turn the light OFF.
ECO Modes: From OFF, simple press and hold down the side switch (or the rear switch) to activate ECO modes. press and hold down the side switch (or the rear switch) again after this activates. the light cycle through "L1->L2->L3->L4" (or "L4->L3->L2->L1"). When the light cycle to the last level "L4" (or "L1"), the light will stop to cycle and stay at last level. If you want to select one level you need, just release the side switch (or the rear switch) while the light cycling. If you press and hold down the side switch (or the rear switch) again, the light will be cycled through opposite direction.
△ Note: After activate ECO modes, single click to turn OFF the light; double click to activate Turbo mode; quickly triple click to activate Special modes.
General modes: Single click the side switch (or the rear switch) to activate General modes. Press and hold down the side switch (or the rear switch) agin after this activates. the light cycle through "Low->Mid1-Mid2 ->Mid3->High" (or "High->Mid3->Mid2->Mid1->Low"). When the light cycle to the last level "High" (or "Low"), the light will stop to cycle and stay at last level. If you want to select one level you need, just release the side switch (or the rear switch) while the light cycling. If you press and hold on the side switch (or the rear switch) again, the light will be cylced through opposite direction.
△ Note: After activate general modes, single click to turn OFF the light; Double click to activate Turbo mode; Quickly triple click to activate Special modes.
Turbo mode: Double click the side switch (or the rear switch) to activate Turbo from any other modes (except LOCK-OUT).
△ Note: After activate Turbo mode, single click to turn OFF the light; double click or long press to activate General modes; quickly triple click to activate Special modes.
Special modes: From OFF, quickly triple click the side switch (or the rear switch) to activate strobe. From strobe, press and hold down to cycle through the other safety modes; Beacon > SOS > back to strobe.
△ Note: After activate Special modes, single click to turn OFF the light; double click to activate Turbo mode; quickly triple click to activate General modes.
Breathing light mode: From OFF, click and hold for 3 seconds and release. LED indicator under the side switch will start to breath. There is nothing particular about this except that it is a cool mood light. Click once to turn off.
△ Note: While holding down the side switch (or the rear switch) for 3 seconds, MK38 will activate one level of ECO modes and turn off automatically, and then LED indicator under the side switch will turn on. 
LOCK-OUT / UNLOCK: Locking out the light when not in use is highly recommended. From OFF, quickly quadruple click (simply click 4 times fast) to LOCK-OUT. The light will then a blink to indicate that it has been LOCKED. To UNLOCK, quickly quadruple click (simply click 4 times fast) again, the light will turn on to indicate it has been unlocked.
Memory function: From OFF, single click (or long press) the side switch (or the rear switch) to activate the light level at General modes (or ECO modes) last used.Battery pack charging:
1. Please switch off the light and plug the USB Type-C charging cable into the included standard adapter, then connect another USB Type-C socket of the charging cable to the light.
2. MK38 have intelligent identified charging function. When battery pack charging, the indicator near USB-C port will be red constant ON, the indicator will be OFF after battery pack charging is completed.
3. Be sure to close the anti-dust USB cover once battery pack charing is completed.
Power bank function:
1. Please switch off the light and connect the USB Type-C socket of the included charing cable to the light, then connect another USB Type-C socket of the charging cable to the digital device with a USB type-C charging port.
2. MK38 have intelligent identified discharging function. When battery pack discharging as power bank, the indicator will be red constant-ON.
3. Be sure to close the anti-dust USB cover once the battery pack discharging is completed.* Note:  
A. You can turn the light ON / OFF and operate all modes when charging & discharging.
B. Battery pack can be full charged in approximately 1.8 hours with the included standard adapter and USB Type-C charging cable.
C. Recharge a stored every four months to maintain optimum performance of the battery.
D. When Connecting to the power bank with the same PD protocol, It might fail to be charged if the protocols are not compatible with the device. For example, Power bank is charging to MK38, or MK38 is charging to the power bank.
E. As a power bank, MK38 can charge only one digital device at a time. Please DO NOT use it to charge a digital device through any multi-port USB hub or charge two or more digital devices at the same time.
Battery Voltage Indicator
When the light is turned on, the built-in power indicator under the stainless steel side switch will show different color light to indicate remaining battery voltage:While battery voltage > 10.2V, blue light turn on and last 3s.
While battery voltage 9.6V-10.2V, purple light turn on and last 3s.
While battery voltage 8.7V-9.6V, red light constant-on.
While battery voltage < 8.7V, the light turn off authomatically.
* Low voltage warning
When the battery voltage level drops below the present level, the light is programmed to downshift to a lower brightness level until lowest output is reached. When the battery voltage level still drops low under lowest output, it will shut off authomatically.
Intelligent Overheat Protection
Advanced intelligent temperature regulation technology allows MK38 to dynamically adjust output performance according to its body temperature.The light will accumulate a lot of heat when you use it at high-output levels for extended periods. When the light reaches the temperature of 65°C or above, the light will automatically step down its output to reduce the temperature. at the same time we also make more premium cooling fins on flashlight head and built-in duable-row fans to blow effectively these cooling fins through the outside to protect flashlight overheat.
* Note: DO NOT submerge the flashlight into any liquid when it is hot. Doing so may cause irrepareable damage to the light due to the difference of air pressure inside and outside of tube.Note: We also high recommend the oridinary users to purhcase Samsung 40T unprotected flat-top 21700 batteries or Modell P42A unprotected flat-top 21700 batteries to drive MK38.
Battery Installation
1. Loose the tailcap counterclockwise and take it away.
2. As shown in the graph, insert batteries with the positive (+) to connect the glod plated copper positive round conductive plate on tailcap PCB, the nagative (-) to connect the glod plated copper spring on PCB.
3. Tighten the tailcap by aligning the two metal pins on the tailcap with the corresponding holes on the flashlight body, and rotate clockwise.
* Warning: 1. DO NOT mix rechargeable and non-rechargeable batteries
                 2. DO NOT mix batteries of different types/brands
                 3. DO NOT mix batteries of different power levels
                 4. DO NOT mix old and new batteries Battery Voltage Indicator
When the light is turned on, the built-in power indicator under the stainless steel side switch will show different color light to indicate remaining battery voltage: While battery voltage > 10.2V, blue light turn on and last 3s.
While battery voltage 9.6V-10.2V, purple light turn on and last 3s.
While battery voltage 8.7V-9.6V, red light constant-on.
While battery voltage < 8.7V, the light turn off authomatically.
* Low voltage warning
When the battery voltage level drops below the present level, the light is programmed to downshift to a lower brightness level until lowest output is reached. When the battery voltage level still drops low under lowest output, it will shut off authomatically.
Intelligent Overheat Protection
Advanced intelligent temperature regulation technology allows MK38 to dynamically adjust output performance according to its body temperature.The light will accumulate a lot of heat when you use it at high-output levels for extended periods. When the light reaches the temperature of 65°C or above, the light will automatically step down its output to reduce the temperature. at the same time we also make more premium cooling fins on flashlight head and built-in duable-row fans to blow effectively these cooling fins through the outside to protect flashlight overheat.
* Note: DO NOT submerge the flashlight into any liquid when it is hot. Doing so may cause irrepareable damage to the light due to the difference of air pressure inside and outside of tube.How to disassemble the handle?
1.Switch off flashlight and use tag tool (included accessory) to press the quick release screw on the counterbored hole, loose the screw counterclockwise, and then twist out the screw with your hand.
2.Lift up the handle, 4PIN connectors on the handle will take off from the connector socket on flashlight head. then you can place the handle to somewhere.
3. Please insert quick release screw into the connector socket and tighten it. At last please use tage tool (included acccessory) to press the screw to tighten it fully to get a waterproof, and then you can switch on flashlight as usual.
How to install the handle?
1.Switch off flashlight and use tag tool (included accessory) to press the quick release screw on the connector socket, loose the screw counterclockwise, and then twist out the screw with your hand.
2.Lift up the handle, make sure the the counterbored hole align the screw hole on flashlight body and 4PIN connectors on the handle will also align the connector socket on flashlight head.
3.Put the screw through the counterbored hole and make the screw tip into the screw hole on flashlight body, and then take tag tool (included accessory) to press the screw to tighen.
Warning
1. The flashlight is locked out default by us. Please quickly four-click to unlock it for the first use.
2. The flashlight is high-intensity lighting device capable of causing eye damage or other harms, so please avoid shining the light directly into anyone's eyes. 3. The flashlight is recommended use for adult or under adult supervision. Please keep this flashlight away from children.
4. Please take off the dustproof filme from lens immediately for the first use.
5. This flashlight is capable of emitting intense heat when turning on for a long period of time. Remember to install the handle before using. Avoid touching the appearance of the flashlight.
6. DO NOT shine a object at close range, cover the flashlight, or place the head to face down when it is turn on. The heat bilt-up may objects to burn or even result in unexpected disasters.
7. After the cooling fans ON, DO NOT push your fingers into fans and force them to stop working as it will demage the fans.
8. DO NOT immerse the flashlight in seawater or other correosive media as it will damage the flashlight.
9. Please turn the flashlight off and make sure that its lock out if it is left unused, carried or transproted. The heat built-up due to accidental activation may melt the lens of the flashlight, cause close objects to urn, or even result in unexpected disasters.
10. The built-in battery pack is charged to approximately 50% by default and will not support maximum output and maximum runtime.
11. To maintain waterproof rating, please lubricate the o-ring with silicone safe lubricant and replace worn o-rings as needed.
12. Please recharge the product every 4 months when left unused for a prolonged time.
13. DO NOT disassemble or modify this product which can cause damage and will void the warranty.
14. When battery pack are full charged, led indicator will turn OFF. at the same time please don't forget to take off USB Type-C charging cable and close the anti-dust USB cover immediately.
15. After uninstall the handle, please put the quick release screw into the connector socket on the flashlight head and tighten it to get a better waterproof.
16.After discharge as power bank is complete, please don't forget to close the anti-dust USB cover immediately

About this item
Powerful & lightweight: the bss v4 light use sst70 led with a beam up to 2523 lumens and throw up to 250m. Weight only 3.2oz, can put in a compact everyday carry ready package.
Portable: take the bss v4 anywhere with the clip that can be attached to backpacks and pocket for easy access, or use the included holster or lanyard designed for edc.
Six lighting modes: intelligent firefly/ low / medium / high / turbo /strobe light modes makes this handheld flashlight suitable for many indoor and outdoor activities.
Usb rechargeable: the bss v4 rechargeable flash light powered by high capactiy battery (included in the package). Easy and convenient for usb charging.
Durable equipment: designed with high quality material, excellent for long time daily using, camping, hiking, self-defense and emergency use. The dual switch design is easy to use and tactile so you can even operate the bss v4 while wearing gloves.

Thrunite bss v4 flashlight power indicator
Power indicator: blue (>21%), red (11-20%), flashing red (<10%).
During charging, the indicator is red.
After being fully charged, the indicator will be blue.
When indicator flashes purple, it means abnormal charging.
Only firefly and low modes are available while charging.
Note: please screw down the light head and tail cap tightly before use.
Micro usb charging

1. The bss v4 flashlight powered by rechargeable high capactiy battery.
2. The bss v4 flashlight equipped with micro usb charging cable, easy and convenient for charging.
Dual-switch

1. When the flashlight unlocked, single click the tactical tail switch to access to turbo mode directly, side switch doesn't work.
2. After the light is unlocked, press the side switch to turn the light on/off. You can also change the mode through the side switch.
Six light modes

1. Firefly mode: 0.54 lumens / 56 days
2. Low mode: 33 lumens / 55 hours+42 mins
3. Medium mode: 350 lumens / 4.5 hours
4. High mode: 1426~634 lumens / 130 seconds+150 mins
5. Turbo mode: 2523 lumens ~614 lumens / 125 seconds+147 mins
6. Strobe mode: 1200 lumens / 210 mins
What will you receive?

Bss v4 flashlight*1,
Battery *1,
Spare o-rings *2,
Usb rubber cover *1,
Usb charging cable *1,
Pocket clip*1,
Red lens*1,
Removable strike bezel*1,
Lanyard *1,
Holster*1.
How to use the bss v4 flashlight?
Operation

Change modes: single click the side switch to the last mode used, then press and hold the side switch to cycle through low, medium and high.
Shortcut to firefly: when the light is off, press and hold the side switch to get firefly mode.
Shortcut to strobe: triple-click the side switch to get strobe.
Turn on/off: after the light is unlocked, press the side switch to turn the light on/off. The light will turn on in the last mode used, except firefly, turbo and strobe.
Lock/unlock: when the light is off, long press the side switch to get firefly mode. When in firefly mode, long press the side switch to lock the flashlight,another long press to unlock.
Direct access to turbo: when the flashlight unlocked, single click the tactical tail switch to access to turbo mode directly, side switch doesn't work.
Specifications
Model bss v4
Led sst70
Material aluminium alloy
Reflector smooth reflector
Powered by rechargeable battery
Max output 2523 lumens
Max distance 250m / 820ft
Intensity 15750 cd (max.)
Product size 146.5mm*28mm*25.4mm
Net weight 91g / 3.2oz
Impact resistance 1.5 meter
Waterproof ipx-8 (2m)
Lumen -moonlight 0.54lm - 56 days - low 33lm - 55hrs - 42mins - med 350lm - 4.5hrs - high 1426-634lm - 130sec +150min - turbo 2523-624lm - 125sec + 147min - strobe (1200lm/210min)
Throw 250m
Cd 15'750cd
Waterproof rating ipx8
Led sst70
Dimensions 146mm x 28mm x 25mm
Weight 91g
Compatible batteries 18650 3100mah imr (included)
Impact rating 1.5m
Included accessories -battery -spare o-ring -usb rubber cover -micro usb cable -pocket clip -red lens cover -strike bezel -lanyard -holster
Battery life -moonlight 0.54lm - 56 days - low 33lm - 55hrs - 42mins - med 350lm - 4.5hrs - high 1426-634lm - 130sec +150min - turbo 2523-624lm - 125sec + 147min - strobe (1200lm/210min)

About this item
extremely bright output - high performance cree xhp70.2 led bulb delivers a max output up to 16340 ansi lumens and also an intense beam of bright light up to 1345 feet / 410 meters.
Fast charging and long lasting - with 5.5mm charging port 3a fast charging and built-in non-removable power adapter, you could use it for incredibly 62.5 days in firefly mode after one full charging.
Versatile modes and multi use: intelligent firefly/ low / medium / high / turbo /turbo s / strobe light modes, makes tn50 the perfect flashlight for searching, camping, hiking, and outdoor activities.
Intelligent power level indicator - when the voltage is lower than 11.1v, the indicator on the switch will flash red. Please charge the flashlight immediately.
What you get: with your purchase of thrunite tn50, you will also receive an unconditional 30 days money back guarantee and 2 years free repair warranty. Package content: tn50 flashlight*1(include the battery pack), holster*1, spare o-ring*2, anti-dust plug*1, power adapter*1
product description
specifications:

led: cree xhp70.2x4 with a lifespan of 20+ years of run time.
Runs on: built-in battery pack.
Reflector: orange peel reflector.
Working voltage: 10.8-16.8v
output mode/runtime*:

turbo s (16340lumens-2964lumens, 80secs+230mins)
turbo (7600lumens-2960lumens; 195secs+235mins)
high (3580lumens-3000lumens; 12mins+235mins)
medium (1157lumens, 11hrs)
low (190lumens; 50hrs)
firefly (1.3lumens; 62.5days)
strobe (2900lumens; 340mins)

peak beam intensity: 42000 cd (max.).
Max beam distance: 410m.
Impact resistant: 1 meters.
Waterproof to ipx-8 standard (2 meters).
Weight: 650g .
Dimensions: 134.5mm*68mm*58mm
accessories: holster x1, spare o-ring x2, anti-dust plug x1, power adapter x1.

Operation

lock/unlock
under the lockout mode, press and hold the side switch for over 5 seconds, the indicator flashes blue to signal the flashlight is unlocked.
When the flashlight is off, press and hold the side switch for over 5 seconds will enter firefly mode firstly. Under firefly mode, press and hold the side switch for over 5 seconds till the light is off to access the lockout mode..

Turn on/off
press the side switch to turn the light on/off.

Change modes
when the light is on (not on firefly mode), press and hold the side switch to automatically cycle through low, medium, high and turbo modes. The mode is selected when the side switch has been released.

Lumen -moonlight 1.3lm - 62days - low 190lm - 50hrs - med 1157lm -11hrs - high 3580 -3000lm -12min +235min - turbo 7600-2960lm -195sec + 235min -turbo s 16340-2964lm - 80sec +230mins - strobe (2900lm/340min)
throw 410m
cd 42'000cd
waterproof rating ipx8
led xhp70.2 x4
dimensions 134mm x 68mm x 58mm
weight 650g
compatible batteries thrunite battery pack
impact rating 1 meter
included accessories holster x1, spare o-ring x2, anti-dust plug x1, power adapter x1.
Battery life -moonlight 1.3lm - 62days - low 190lm - 50hrs - med 1157lm -11hrs - high 3580 -3000lm -12min +235min - turbo 7600-2960lm -195sec + 235min -turbo s 16340-2964lm - 80sec +230mins - strobe (2900lm/340min)

A9 is a powerful multifunctional flashlight applied to rescuing, caving, policie, camping and tripod lighting. Equipped With 3* CREE XHP70.2 LED, the Max output is up to 12000 Lumens. It throws up to 420m beam distance. The power supply is designed with 1*10200 battery and built-in Type-C charge, which is more convenient to use.
Utilized 1*CREE XHP70.2 LED
Powered by 1 pcs 10200 high-drain Li-ion battery
12000 lumens max output
Brand Wuben
Type A9
Max Lumens 12000lumens
Max Runtime up to 23days
Emitter GREE XHP 70.2 LED
Tint Cold white
Max bean throw 420m
Battery type 102000 protected Li-ion battery
Charging Port Type-C
Size 121.5*24.5mm/ 4.78*1inch (L*D)
Weight 447g/15.77oz (without battery) 795g/28.04oz (with battery)
Waterproof IP68

King Guard Police Pepper Spray 110ml
Main Perfomances:
Spray Distance: >3m
Effective Spray time: >4s
Suitable Temperature: -30 -+50 degrees celsius

IMALENT MS06 is a can-sized super bright searching flashlight that blasts a max output of 25,000 lumens and a max beam distance of 513 meters. This 25,000 lumens flashlight can be quickly charged with the three included 4000 mAh 21700 Li-ion power batteries via the magnetical USB port. The amount of light that the IMALENT MS06 flashlight emits is truly remarkable, a wide beam angle and strobe function are quite ideal for Search and Rescue. Extremely small for a flashlight with this much power, only 4.68” long plus a flat light body, this flashlight is the perfect tool for exploring and search and rescue. The battery level indicator lets you know the status of your batteries. Additional features include intelligent memory circuit, lockout function and six output levels. Once you see the raw power of a 25,000-lumen flashlight, you will never feel troubled at night adventures, such as searching, caving, patrolling, etc.
PRODUCT DESCRIPTION
.Utilizes 6 pieces of American CREE XHP70 2nd LEDs.The lifespan up to 50000 hours with maximum output of 25,000lumens.
.Powered by three rechargeable 4000mAh 21700 Li-ion batteries
Instant turbo output by double press the power switch button while triple press the power switch button, can get lowest output
.Product size:56(head diameter)*51(body diameter)*119(length)mm
.Net weight：572g(battery included)
.High efficiency constant power circuit will maintain constant brightness.
.Built-in thermal control module will automatically adjust the brightness output according to the working state and outer temperature.
.Combination of toughened ultra-clear mineral and anti-reflective coating glass.
.Aluminum SMO reflector.
.Aerospace-grade aluminum alloy body,wear-resistant Type III hard-anodized surface treatment .
.IPX-8 standard waterproof(2 meters submersible).
.1.5m impact resistant.
.Tail stand capability

Specifications:
-12 Lumens
-3x LR44 (Included)
-15m Beam Distance
-20Hours Run Time
-Keychain
-Water resistant
-Bottle opener

Features:
High performance long-rang searching-level royal Flashlight
High efficiency constant current circuit and Integration optical lens
Large-diameter reflector cups make the light gathering ability stronger, and the light intensity is greatly improved
Memory function in brightness mode. When the flashlight is turned on again, the mode will stay in the mode which was last turned off
Intelligent temperature control design, automatically reduce lumen output when temperature is higher than 55℃ in turbo knurling design
Breathing switch function: Monitor working process of battery capacity and voltage
Added a PTZ screw hole on the head to fix standard 1/4 inch Tripod mount
Head fin adjustment and design to speed up heat emission
Configure a strap to make your trip more convenient
Handle, switch button and gravity control, is more ergonomic to facilitate your operation
Constructed from aero grade aluminum alloy with HAIII military grade hard-anodized finish
IPX-7 standard waterproof, can be used in rainstrorms

Operation:
Light on/off: Press the side switch to turn the light on/off
High mode: Normal mode clicks three times
Lockout mode: When the flashlight is off, long press to turn off the breathing light and lock out
Under the lockout mode, long press to unlock it
Click twice in Light off or Normal mode, to enter TURBO and clicks three times to enter TACTICAL STROBE
Normal mode will be memorized

Notes:
1. Battery Configurations: Sumsung 3500mAh 35E Batteries Recommended
(If the battery is not enough current, it won't drive the flashlight up or the light will be weaker)
2. Do not disassemble the lamp head, otherwise it is easy to destroy the bulb


Package List:
1 x MT35 Plus
1 x Back Strap
1 x lanyard
1 x Tripod Mount Screw
2 x Orings
1 x Manual
4 x 18650 Batteries
1 x Soshine charger

Specification
Product Name Mateminco MT35 Plus
Brand MATEMINCO
LED Cree Xhp35 Hi
Material Aluminum Alloy
Mode
1. Moon, Mid, High, Turbo, Tactical Strobe, SOS, Location Beacon
2. Any Mode (including turn off): Click twice to Turbo or Click three times to Strobe, Then single click to SOS, Location Beacon
3. Breathing Light Lock Out Design
Switch Type Clicky Switch
Switch Location Body Side Of The Flashlight
Battery 4*18650 battery
Max Output 2700 Lumens
Max Beam Distance 2416m
Max Beam Intensity 1460000cd
Color Black
Impact Resistance 1.5 Meters
Waterproof IPX7
Weight 1290g (without battery)
Size 234mm*136mm*54mm (Length * Head Diameter * Body Diameter)

The Fenix TK26R is a tactical flashlight packed full of features. Not only do you have five modes of white light, but you also have an independent red and green light. Powered by one included 18650 battery, this light can blast a maximum 1500 lumens 1148ft (350m).
The Fenix TK26R is a flashlight packed full of features. Not only do you have five modes of white light, but you also have an independent red and green light. Powered by one included 18650 battery, this light can blast a maximum 1500 lumens 1148ft (350m). Features include three independent switches that control all the lights functions, plus strobe, a battery level indicator and strike bezel. Built tough from premium aluminum, this tactical flashlight is also waterproof and dustproof. 
Length: 5.9” (150mm)
Head: 1.6” (40mm)
Body: 1.0” (25.4mm)
5.5 oz. (157g) excluding battery
One (included) 18650 rechargeable Li-ion battery or two CR123A batteries

The X7R Marauder is a combination of all the best technology in today’s tech market creating one of the brightest and most advanced flashlights in existence.

We decided to take the already extremely popular X7 Marauder and pack it with as many practical and thought driven features as we could.

The tremendously bright 12,000 lumen turbo mode features a proximity sensor in the reflector that will lower the output when it is too close to objects that it may damage. The side switch contains a motion sensor that will illuminate the switch when the light is moved making it easier to locate in the dark. The tail cap includes an innovative twist to open USB type-C charging port to maintain water and dust proof ability while charging 3X the speed of a standard micro-USB.

The design is completely improved with precisely milled finger grooves with chamfered edges for maximum grip and comfort during use. The heat sinks have been meticulously designed to decrease heat transferred to the body of the light before the output is lowered due to our custom thermal management system. We are proud to offer the X7R with years of development and innovation to provide you with the best flashlight experience possible.



KEY FEATURES

- Maximum output of 12,000 lumens, a 33.33% brightness increase over the original X7 Marauder.
- USB Type-C charging port and cable included, providing 3 times faster charging than normal micro-USB cable, and it is also quickly becoming the mainstream technology.
- Enhanced safety. Proximity sensor that drops the output automatically when the flashlight head approaches a nearby object. Active thermal management system that reduces the output when the temperature gets too hot to prevent any damage or overheating.
- Innovative twist to open and close charging port cover design that still maintains waterproof ability.
- Ergonomic and user-friendly design. Pop-out lanyard hole for thicker chord to support the weight of the light while still being discrete. Milled finger grooves for a natural and comfortable grip.
- Multi-function indicator under the side switch. It can work as location indicator, flashlight status indicator, and low battery indicator.
GENERAL DATA
Beam Distance (ft) 1247
Beam Distance (m) 380
Max. Performance (lumens) 12000
Charge type TypeC
Compatible Batteries Customised Li-Ion Battery
Light Intensity (candela) 36100
Light Form Search & rescue, self-defense, car, camping, fishing, household, general use, climbing, cave exploration, outdoor activities
Lens / Reflector Type Smooth reflector (central area and flood area)
Mode Operation Side Switch
Form/Size Factor Large size (Deodorant Spray / Coke Can)
Series Series X (eXtreme performance)
Unique Characteristics
Maximum output of 12,000 lumens, a 33.33% brightness increase over the original X7 Marauder.
USB Type-C charging port and cable included, providing 3 times faster charging than normal micro-USB cable, and it is also quickly becoming the mainstream technology.
Enhanced safety. Proximity sensor that drops the output automatically when the flashlight head approaches a nearby object. Active thermal management system that reduces the output when the temperature gets too hot to prevent any damage or overheating.
Innovative twist to open and close charging port cover design that still maintains waterproof ability.
Ergonomic and user-friendly design. Pop-out lanyard hole for thicker chord to support the weight of the light while still being discrete. Milled finger grooves for a natural and comfortable grip.
Multi-function indicator under the side switch. It can work as location indicator, flashlight status indicator, and low battery indicator.
LIGHTING LEVELS
LEVEL 1 (lumens) 12000
Run-time LEVEL 1
12000 lumens (~3000lm);

2h (3m).
LEVEL 2 (lumens) 7000
Run-time LEVEL 2
7000 lumens (~3000lm);

1h50m (12m).
LEVEL 3 (lumens) 3000
Run-time LEVEL 3
2h10m.
LEVEL 4 (lumens) 1000
Run-time LEVEL 4
6h.
LEVEL 5 (lumens) 500
Run-time LEVEL 5
14h.
LEVEL 6 (lumens) 10
Run-time LEVEL 6
30 days.
Strobe Yes
SOS / BEACON No
TECHNICAL CHARACTERISTICS
Waterproof IPX7
Weight (g / oz) 665 / 23.46
Length (mm / in) 129 / 5.08
Head Diameter (mm / in) 68 / 2.67
Body Diameter (mm / in) 52 / 2.04
Led 3 x Cree XHP70 CW
Packaging Carton gift box
Use search and rescue, hunting, military, special operations, marine, camping