Globally, 2.7 billion people are using onsite sanitation systems, particularly in low income, high density settlements (LIHDS) in urban areas of developing countries. However, treatment technologies to manage the faecal sludge (FS) generated from these systems are often not in place, leading to high risks for environmental and public health. The development of replicable and effective technologies for FS treatment is key in addressing this challenge. This research focused on development of an innovative FS stabilisation technology and addressed key constraints in anaerobic FS treatment: inadequate pathogen inactivation and limitations in biochemical energy recovery. The developed two-stage reactor system consists of an acidogenic reactor fed with mixtures of FS and market waste to facilitate pathogen inactivation, and a subsequent methanogenic plug-flow reactor for enhanced methane production. Due to its potential for application as an off-site FS treatment technology at any scale, receiving any type of faecal matter, collected from different types of sanitary systems, the system provides an option for FS stabilisation for LIHDS. Additionally, the research evaluated the limitations of sanitation provision in LIHDS, and proposes methods for creating an enabling environment for full-scale implementation of onsite systems. The presented results contribute to designing appropriate sanitation interventions in LIHDS.

Aerobic Wastewater Treatment Processes: History and Development discusses the widely differing influences on the development of aerobic treatment such as water supply, toxic trade effluents, microscopy and population growth in urban areas. It covers the historical development of sewage treatment and the emergence of aerobic biological treatment from the early nineteenth century to the present day. The importance of water supply and the influence this had on the water-carriage system is examined, as is the consequent discharge of sewage into rivers. The factors which govern process selection and process development are discussed. There is a continued impetus to reduce land area, capital costs, running costs, and to optimise performance and process control. The discovery of the activated sludge process is detailed including the development, in the early 1900s, of many forms of this process. Industrial wastes were discharged to biological treatment systems and the impact of such pollutants is reviewed. The work of Royal Commissions, River Boards and the National Rivers Authority is summarised, and the advances in chemical analysis and "on-line" measurement of chemical quality characteristics. Later developments such as reed beds and the use of hybrid treatment systems are covered. Examples are included such as the "fixed film" activated sludge process which has found application for small communities in package form, and also for large-scale municipal treatment plants. Aerobic Wastewater Treatment Processes: History and Development is valuable reading for students of the following courses on CIWEM Dip examination, WITA and B Tech and Environmental Science and Civil Engineering.

Following a successful first edition published in 2007, the follow-up 2011 edition of Wastewater Sludge - A Global Overview of the Current Status and Future Prospects will present an updated and expanded perspective on developments in relation to wastewater sludge around the world. Sludge arising from wastewater treatment represents a serious environmental issue, requiring technological and management solutions to ensure it is processed in a safe and economically efficient manner. Extension of sewers, the construction of new wastewater treatment facilities and the upgrading of existing wastewater plants means the amount of sludge to be handled continues to increase. Alongside this, aspects relating to energy consumption and sustainable operation need to be considered. Within this general picture, sludge is generated in different technical, economic and social contexts around the world, demanding that different approaches need to be taken. The 2011 edition of this report provides a strategic overview of the wastewater sludge market around the world, based on regional and country contributions. These look at the current situation in terms of sludge generation, legislation, technology applied and management management approaches. These will then look at anticipated developments over the short / medium term, including expected developments in terms of legislation and the technology and management solutions to be implemented. These will be complemented by longer term perspectives also. The report has been prepared for the Market Briefing Series of the International Water Association's magazine Water21, with input from IWA's network of wastewater sludge experts around the world. Contributions in the 2011 edition are due to include Western Europe, Portugal, Italy, Belgium, Eastern Europe, Turkey, USA, Canada, Latin America / Caribbean, Colombia, Brazil, East Asia, Korea, Malaysia, South Asia, China, Africa, and Australasia.

Lose yourself in the vast sewer networks that lie beneath the world's great cities - past and present. Let detailed archival plans, maps and photographs guide you through these subterranean labyrinths - previously accessible only to their builders, engineers and, perhaps, the odd rogue explorer. This execrable exploration traces the evolution of waste management from the ingenious infra-structures of the ancient world to the seeping cesspits and festering open sewers of the medieval period. It investigates and celebrates the work of the civil engineers whose pioneering integrated sewer systems brought to a close the devastating cholera epidemics of the mid-19th century and continue to serve a vastly increased population today. And let's not forget those giant fatbergs clogging our underground arteries, or the storm-surge super-structures of tomorrow.

The adoption of the Urban Waste Water Treatment Directive requires sewage sludge to be subsequently treated and the Sewage Sludge Directive regulates the uses and properties of stabilised sludge for being either recycled or disposed. Both directives drive specific actions in two complementary ways. Reduction, Modification and Valorisation of Sludge aims at developing strategies for the disposal and reuse of waste sludge. It aims to develop several processes for reducing both amount and toxicity of sludge, with simultaneous transformation into green energy vectors such as methane or hydrogen. Mesophilic and mainly thermophilic and autothermophilic conditions are explored as classical alternatives for sludge stabilisation, assuring sanitary conditions of the treated sludge. Valuable materials are obtained from sludge, such as activated carbons, which are used in conventional adsorption processes and in innovative advanced oxidation processes. Guidelines are provided for technology selection in agreement with the geographic, economic and technical characteristics of the sewage plants, demonstration of the feasibility of new applications for the sewage sludge, manufacturing of activated carbon from sludge sewage as innovative recycling of sludge waste, and a deep understanding of the methods involved. Visit the IWA WaterWiki to read and share material related to this title: http://www.iwawaterwiki.org/xwiki/bin/view/Articles/GLOBALATLASOFEXCRETAWASTEWATERSLUDGEANDBIOSOLIDSMANAGEMENTMOVINGFORWARDTHESUSTAINABLEANDWELCOMEUSESOFAGLOBALRESOURCE

Wastewater treatment is an energy intensive process that removes contaminants and protects the environment. While some wastewater treatment plants (WWTPs) recover a small portion of their energy demand through sludge handling processes, most of the useful energy available from wastewater remains unrecovered. Efforts are underway to harness energy from wastewater by developing microbial fuel cells (MiFCs) that generate electricity. Key challenges to the development of microbial fuel cells include inefficiencies inherent in recovering energy from microbial metabolism (particularly carbon metabolism) and ineffective electron transfer processes between the bacteria and the anode. We explored the prospects for constructing microaerobic nitrifying MiFCs which could exhibit key advantages over carbon-based metabolism in particular applications (e.g., potential use in ammonia-rich recycle streams). In addition, we evaluated nanostructure-enhanced anodes which have the potential to facilitate more efficient electron transfer for MiFCs because carbon nanostructures, such as nanofibers, possess outstanding conducting properties and increase the available surface area for cellular attachment. In the initial phase of this project, we investigated the performance of a novel nitrifying MiFC that contains a nanostructure-enhanced anode and that demonstrated power generation during preliminary batch testing. Subsequent batch runs were performed with pure cultures of Nitrosomonas europaea which demonstrated very low power generation. After validating our fuel cell hardware using abiotic experiments, we proceeded to test the MiFC using a mixed culture from a local wastewater treatment plant, which was enriched for nitrifying bacteria. Again, the power generation was very low though noticeably higher on the nanostructured anodes. After establishing and monitoring the growth of another enriched nitrifying culture, we repeated the experiment a third time, again observing very low power generation. In the absence of appreciable and repeatable power production from pure and mixed nitrifying cultures, we focused on the second major objective of the work which was the fabrication and characterization of carbon nanostructured anodes. The second research objective evaluated whether or not addition of carbon nanostructures to stainless steel anodes in anaerobic microbial fuel cells enhanced electricity generation. The results from the studies focused on this element were very promising and demonstrated that CNS-coated anodes produced up to two orders of magnitude more power in anaerobic microbial fuel cells than in MiFCs with uncoated stainless steel anodes. The largest power density achieved in this study was 506 mW m-2, and the average maximum power density of the CNS-enhanced MiFCs using anaerobic sludge was 300 mW m-2. In comparison, the average maximum power density of the MiFCs with uncoated anodes in the same experiments was only 13.7 mW m-2, an almost 22-fold reduction. Electron microscopy showed that microorganisms were affiliated with the CNS-coated anodes to a much greater degree than the noncoated anodes. Sodium azide inhibition studies showed that active microorganisms were required to achieve enhanced power generation. The current was reduced significantly in MiFCs receiving the inhibitor compared to MiFCs that did not receive the inhibitor. The nature of the microbial-nanostructure relationship that caused enhanced current was not determined during this study but deserves further evaluation. These results are promising and suggest that CNS-enhanced anodes, when coupled with more efficient MiFC designs than were used in this research, may enhance the possibility that MiFC technologies can move to commercial application.

Based on the International Workshop on Controlled Life-Cycle of Polymeric Materials held in Stockholm, this work examines degradable polymers and the recycling of plastic materials. It highlights recent results on recycling and waste management, including topics such as renewable resources, degradation, processing and products, and environmental issues.

The ultimate in recycling, composting has been in use in some form since ancient times. A well-managed composting facility should exist as a good neighbor contributing to ecology. However, since local populations often perceive risks if a composting facility is built nearby, composting facilities must be designed and operated with minimal odor, dust, and noise emissions. Industrial Composting examines the key operational aspects and problems associated with composting, with strong emphasis on odor mitigation, pathogens, and aerosols. Designed for composting professionals and supported by extensive quality references, this book covers: Facilities Planning and Design Odor Management Design, Material, Energy, and Water Balances Economics of Product Marketing and Sales Public Relations, Participation, and Communication Regulations Pathogen Concentrations as Related to Feedstocks Bioaerosols Associated with Composting and Their Potential Diseases While many books cover composting, most of those currently available are either out of date or contain only a few chapters on the subject. With interest growing in the use of composting for biosolids, food wastes, and other specialty areas, the need for an up-to-date, focused resource is also increasing. To assist composting practitioners, community decision makers, and advocates, Industrial Composting brings recent advances and best practices in composting together in an accessible, professional volume.

During the last decade membrane bioreactor (MBR) technology has grown up to be state of the art in municipal wastewater treatment. Since 1999 the Erftverband has designed, tendered and commissioned three MBR for municipal wastewater treatment in Germany, with capacities from 3,000 to 45,000 m(3)/d. The Erftverband was one of the pioneers in the full scale application of the technology regularly hosted training and information workshops for plant designers and operators from all over the world. Operating Large Scale Membrane Bioreactors for Municipal Wastewater Treatment provides hands-on information on many aspects of MBR technology based on more than ten years of practical experience in the operation of MBR plants with hollow-fiber microfiltration units. It gives details on process configuration, investment and operation costs based on case studies and also in comparison to data from conventional activated sludge (CAS) treatment processes. The book contains the most recent research findings as Erftverband has been collaborating on many of the major European research projects dedicated to MBR technology. Actual process data from all treatment steps of the plants (mechanical pre-treatment, bioreactors, filtration, membrane cleaning) gives an insight into the long-term performance of the MBR plants and into the possible do's and dont's of full scale applications and the potential for further process optimisation. It is a good source of practical advice on tendering and construction, plant management and operation. Operating Large Scale Membrane Bioreactors for Municipal Wastewater Treatment is essential reading for practitioners and researchers, providing information on many aspects of MBR technology, including actual process data, graphs and pictures that illustrate the challenges of MBR design and operation. Visit the IWA WaterWiki to read and share material related to this title: http://www.iwawaterwiki.org/xwiki/bin/view/Articles/MBROperation

This international, comprehensive guide to modeling and simulation studies in activated sludge systems leads the reader through the entire modeling process - from building a mechanistic model to applying the model in practice. Mathematical Modelling and Computer Simulation of Activated Sludge Systems will: Enhance the readers' understanding of different model concepts for several (most essential) biochemical processes in the advanced activated sludge systems Provide extensive and up-to-date coverage of experimental methodologies of a complete model parameter estimation (longitudinal dispersion coefficient, influent wastewater fractions, kinetic and stoichiometric coefficients, settling velocity, etc.) Summarize and critically review the ranges of model parameters reported in literature Compare the existing protocols aiming at a systematic organization of the simulation study Outline the capabilities of the existing commercial simulators Present documented, successful case studies of practical model applications as a guide while planning a simulation study. The book is organized to provide a general background and some basic definitions, then theoretical aspects of modeling and finally, the issues important for practical model applications. Mathematical Modelling and Computer Simulation of Activated Sludge Systems can be used as supplementary material for a graduate level wastewater engineering courses and is useful to a wide audience of researchers and practitioners. Experienced model users such as consultants, trained plant management staff may find the book useful as a reference and as a resource for self-guided study. Visit the IWA WaterWiki to read and share material related to this title: http://www.iwawaterwiki.org/xwiki/bin/view/Articles/MathmematicalModellingandActivatedSludgeSystems

This is the second of two volumes that together provide a comprehensive overview of the current sustainable and low-cost wastewater treatment technologies applied in communities that lack the financial and technical resources needed for an environmental, disease prevention and health nexus. This book reviews engineered wastewater treatment technologies and discusses their application in regard to greenhouse gas emissions, natural resource utilization, land-use, and energy and water savings. The chapters from expert contributors cover topics such as aerobic and anaerobic biological treatments, chemical treatments and precipitation, and disinfection. Readers will also learn about simplified and low-energy wastewater treatment plants, strategies for wastewater reuse, and nanotechnologies for wastewater environmental management. The feasibility regarding time and cost of implementing such technologies is also discussed in this book, and particular attention is given to the removal of conventional and emerging pollutants, toxicants, and heavy metals. Given the breadth and depth of its coverage, the book offers an invaluable source of information for researchers, students and environmental managers alike.

This book, published in collaboration with ERSAR, presents a unique account of governance and regulatory methods used by different countries, states and municipalities that will help regulators and governments all over the world to improve their regulatory approaches. It is the first book to compile such an amount of data about regulatory processes of a wide number of countries from the five continents. It discusses how the characteristics of water and wastewater services call for regulation and how different countries apply distinct regulatory methods. By showing 18 country case-studies, the book offers an interesting perspective as the regulatory models adopted vary immensely depending on geographical location, nature and strength of institutions and governments, political ideology, features and level of development of the countries. In addition, it provides examples of best practices that may be important for policy-makers to enhance the regulatory processes adopted in each country. It looks closely at rules imposed by state and local governments concerning regulatory issues and how they are being applied. Regulation of Water and Wastewater Services covers the fundamental and practical concepts and issues regarding the regulation of water and wastewater services. It describes and compares the regulatory methods adopted in several countries and provides a global overview on regulation. There is detailed coverage of topics such as quality of service regulation, economic regulation and public service obligations. This book is suitable for regulators, academic researchers and students, consultants, operators and managers, policy-makers and other stakeholders. Visit the IWA WaterWiki to read and share material related to this title: http://www.iwawaterwiki.org/xwiki/bin/view/Articles/RegulationofWaterandWastewaterServicesAninternationalcomparison Author: Rui Cunha Marques, Center of Urban and Regional Systems (CESUR), Instituto Superior Tecnico, Technical University of Lisbon in collaboration with the Portuguese Water and Waste Services Regulation Authority (ERSAR)

Sewer systems constitute a very significant heritage in European cities. Their structural quality and functional efficiency are key parameters to guarantee the transfer of domestic and industrial wastewater to treatment plants without infiltration nor exfiltration. Infiltration of groundwater is particularly detrimental to treatment plant efficiency, while exfiltration of wastewater can lead to groundwater contamination. The European research project APUSS (Assessing infiltration and exfiltration on the Performance of Urban Sewer Systems) was devoted to sewer infiltration and exfiltration questions. It was structured in three main Work Areas dealing respectively with i) the development of new measurement methods based on tracer experiments and accounting for detailed uncertainty analyses, ii) the implementation of models and software tools to integrate structural and experimental data and to facilitate data display, operational management and decision-making processes and iii) the integration of economic and operational questions by means of cost estimation, economic evaluation, performance indicators and multi-criteria methods applied to investment/rehabilitation strategies. This final report describes the objectives, methods and main results for each Work Area. References to detailed methods, protocols, reports and tools are given in this final report which will be an invaluable source of information for all those concerned with the performance of urban sewer systems.

Giving you the first comprehensive presentation of the ground breaking research undertaken at Heriot Watt University, with Research Council and industrial funding, this book brings a new perspective to the design of building drainage and vent systems. It provides the building services community with clear and verifiable design methods that will be robust enough to meet challenges such as climate change and water conservation; population migration to the mega cities of the developing world, and the consequent pressures of user concentration; the rise of the prestige building and the introduction of new appliances and control strategies. These all combine to make traditional codified design guidance insufficient. Many assumptions in existing codes defining the entrained airflows within building drainage vent systems cannot be theoretically supported, so designers concerned with these systems need analysis and simulation capabilities which are at least as reliable as those enjoyed by other building services practitioners.

The Method of Characteristics solution techniques which are well established in the pressure surge field are now used to provide solutions for drainage designers. The material is applied to a whole range of abstract scenarios then to a series of real world applications including the forensic modelling of the SARS virus spread within Amoy Gardens in 2003 and the refurbishment of the O2 Dome. Applications to specialised services, including underground station drainage and highly infectious disease treatment facilities are discussed and demonstrated, alongside the use of design and simulation techniques in support of product development.

Aimed at both professional and academic users, this book serves both as a design aid and as a core text for specialist masters courses in public health and building services engineering.

Environmental Technologies to Treat Nitrogen Pollution will provide a thorough understanding of the principles and applications of environmental technologies to treat nitrogen contamination. The main focus will be on water and wastewater treatment, with additional coverage of leachates and off-gasses. The book will bring together an up-to-date compilation of the main physical, chemical and biological processes demanded for the removal of nitrogenous contaminants from water, wastewater, leachates and off-gasses. It will include a series of chapters providing a deep and broad knowledge of the principles and applications required for the treatment of nitrogen pollution. Each chapter will be prepared by recognized specialists across the range of different aspects involved in the removal of nitrogenous contaminants from industrial discharges. Environmental Technologies to Treat Nitrogen Pollution will be the first book to provide a complete review of all the different processes used for the global management of nitrogen pollution. It will also contain updated information about strategies to achieve nitrogen recovery and reuse in different industrial sectors. Several case studies will document the application of different environmental technologies to manage nitrogen pollution. This book will be of interest to lecturers and graduate students in the following subject areas: environmental engineering, environmental biotechnology, wastewater treatment plant design, water pollution control, contaminants recovery and reuse. The book will also be an attractive reference for environmental engineering consultants.

This project was initiated in response to the establishment of mercury TMDLs around the country and issues raised by this process, specifically concerning the issue of mercury bioavailability. While many of these studies recognize that point sources constitute a small fraction of the mercury load to a water body, a question has been raised concerning the relative bioavailability of mercury coming from various sources. For instance, is the mercury discharged from a wastewater treatment plant more or less bioavailable than mercury in precipitation, mercury in urban stormwater, or mercury in sediments? This project seeks to address this question by developing a reliable definition and approach to estimating bioavailability, by profiling various sources of mercury in a watershed with regard to the species of mercury present and by profiling those factors or conditions in either the effluent or the receiving water that enhance or mitigate the bioavailability of those forms. There were several important objectives relevant to the estimation of bioavailability and potential bioaccumulation of mercury from wastewater treatment plants and other sources in receiving waters. The first was to develop a working definition of bioavailability. For purposes of this project, this definition includes not only methylmercury, the form of mercury that readily bioaccumulates in aquatic food chains, but also bioavailable and potentially bioavailable inorganic mercury species that can be converted to methylmercury within a reasonable time frame. It is concluded that the strength of binding to solids and mercury-sulfur-organic matter associations are major factors in determining the bioavailability of inorganic Hg. A second major objective was to identify those factors or conditions in both the effluent and the receiving waters that enhance or mitigate the transformation of inorganic mercury to methylmercury and its subsequent bioaccumulation. Profiles were developed for various sources of mercury in watersheds, including wastewater treatment plants, with regard to bioavailable and potentially bioavailable mercury, and key factors in effluents and receiving waters that enhance or mitigate it. A procedure to assess the relative bioavailability of mercury from various watershed sources, including wastewater treatment plants was developed and tested using data from a US location. The project also features a literature review of conventional and emerging technologies for the removal of mercury from effluent streams and their effects on mercury bioavailability. A review of the salient aspects of mercury TMDLs completed by EPA and the states is also included. This project concludes that, based on available data and bioavailability as defined in this report, wastewater effluent is one of the lowest among the sources evaluated with respect to mercury bioavailability, along with urban runoff and mining runoff. Atmospheric deposition and contaminated sediments tend to be among the highest sources with respect to mercury bioavailability.

A bidirectional approach of detoxifying the liquid and gaseous effluents of oil refineries is elucidated in this thesis. Liquid effluents of oil refineries contain selenium oxyanions and phenol, while gaseous effluents contain CO/syngas. To remove the phenol and simultaneously reduce the selenite oxyanions, a fungal-bacterial co-culture of Phanerochaete chrysosporium and Delftia lacustris was developed. Two modes of co-cultures of the fungus and the bacterium were developed. Both cultures were investigated for phenol degradation and selenite reduction. In order to valorize the CO/syngas by bioconversion techniques. an anaerobic methanogenic sludge was acclimatized to use CO as the sole carbon substrate to produce acetic acid, butyric acid, and hexanoic acid. Later, the acids were metabolized at lower pH, producing alcohols ethanol, butanol and hexanol, confirming the successful enrichment strategy. The next experiment focused on the absence of the trace element tungsten, and consecutively selenium on the previously CO acclimatized sludge under the same operating conditions. An in-situ synthesized co-polymeric gel of N-ter-butyl-acrylamide and acrylic acid was used to recover ethanol, propanol and butanol from a synthetic fermentation broth. The scope of repeated use of the gel for alcohol recovery was investigated and 98% alcohol was recovered.

As the global nature of pollution becomes increasingly obvious, successful hazardous waste treatment programs must take a total environmental control approach that encompasses all areas of pollution control. With its focus on new developments in innovative and alternative environmental technology, design criteria, effluent standards, managerial decision methodology, and regional and global environmental conservation, Advance in Hazardous Industrial Waste Treatment provides the widest possible coverage drawn from the full spectrum of experts in the field

The volume covers environmental pollution sources, waste characteristics, control technologies, management strategies, facility innovations, process alternatives, costs, case histories, and effluent standards in industry. It delineates methods, technologies, and the regional and global effects of important pollution control practices. Chapters highlight innovative and alternative technologies, design criteria, managerial decision making, and regional and global environmental conservation specific to industrial hazardous wastes. They feature examples of major industrial hazardous pollutants that have significant effects on the environment, as well as extensive bibliographies for each industrial waste treatment practice that point to sources of further information.

Since the field of industrial hazardous waste treatment is very broad, no one can claim to be an expert in all industries. Therefore, editors Wang, Shammas, and Hung draw on collective contributions that reflect the depth and breadth of the field, making the resulting handbook the best available reference on chemical and environmental engineering for industrial hazardous waste treatment. They provide technical and economical information on the development of the most feasible total environmental control programs that can benefit industries and local municipalities.

Offers a guide to current environmental health and safety statutes--providing a working knowledge of the major legislations and regulations and demonstrating the steps necessary for compliance. Illustrates overall health and safety management skills for multimedia facilities.

Introduction to Chemical Exposure and Risk Assessment focuses on the principles involved in assessing the risks from chemical exposure. These principles include the perception of risk, an understanding of how numbers are handled, and how chemicals affect health. The book briefly describes the major sinks, such as water and air, where chemicals are introduced. This is followed by a discussion on how concentrations are estimated and risk assessments are made. A discussion of risk benefit analysis and a presentation of several case studies using the principles for assessing risks are also included.

Environmental concerns have pushed the decarbonisation of the European economy high on the EU political agenda. This has renewed old debates about the role of nuclear energy in the European economy and society that gravitate around the issues of nuclear safety and radioactive waste management (RWM). RWM carries many elements of technical complexity, scientific uncertainty and social value, which makes policy decisions highly controversial. Public participation is usually believed to improve these decisions, ease their implementation by solving substantial conflicts, and enhance trust and social acceptance. Drawing upon sources including Euratom and the OECD Nuclear Energy Agency, the author offers a detailed overview of public involvement in RWM in the EU, analysing the implementation of national policies through official programmes and the views of stakeholders from all Member States. This book highlights the key successes and challenges in the quest for greater participation in RWM, and extrapolates insights for other contested energy infrastructures and controversies in land use. This book will be of great relevance to students, scholars and practitioners with an interest in radioactive waste management, energy policy, and EU environmental politics and policy.

Except in schoolboy jokes, the subject of human waste is rarely aired. We talk about water-related diseases when most are sanitation-related - in short, we don t mention the shit. A century and a half ago, a long, hot summer reduced the Thames flowing past the UK Houses of Parliament to a Great Stink, thereby inducing MPs to legislate sanitary reform. Today, another sanitary reformation is needed, one that manages to spread cheaper and simpler systems to people everywhere. In the byways of the developing world, much is quietly happening on the excretory frontier. In 2008, the International Year of Sanitation, the authors bring this awkward subject to a wider audience than the world of international filth usually commands. They seek the elimination of the Great Distaste so that people without political clout or economic muscle can claim their right to a dignified and hygienic place to go . Published with UNICEF

Handbook of Nanomaterials for Wastewater Treatment: Fundamentals and Scale up Issues provides coverage of the nanomaterials used for wastewater treatment, covering photocatalytic nanocomposite materials, nanomaterials used as adsorbents, water remediation processes, and their current status and challenges. The book explores the major applications of nanomaterials for effective catalysis and adsorption, also providing in-depth information on the properties and application of new advanced nanomaterials for wastewater treatment processes. This is an important reference source for researchers who need to solve basic and advanced problems relating to the use of nanomaterials for the development of wastewater treatment processes and technologies. As nanotechnology has the potential to substantially improve current water and wastewater treatment processes, the synthesis methods and physiochemical properties of nanomaterials and noble metal nanoparticles make their performance and mechanisms efficient for the treatment of various pollutants.

This well-documented study examines one of the increasingly pressing problems for US homeland security: the storage and management of radioactive waste. Despite pressing homeland security and energy security concerns associated with highly radioactive waste, political considerations have prevented policy makers from adopting adequate long-term solutions to the problem. This book explores nuclear waste problems through the broader lens of federal, state and local government and the resultant constraints on policy that emerge within the American political system. Presenting specific case studies to highlight the deficiencies in current policy and planning as well as the possibility of terrorist activity, it is highly suited to courses on security studies and environmental politics.