Current concerns with climate change have resulted in greatly increased interest in power recovery from low grade heat sources. This includes both hot fluid streams which can be expanded directly to produce mechanical power and those which act as a source of heat to closed cycle power generation systems. "Power recovery from low grate heat by means of screw expanders" with a generalised overview of how best to recover power from such sources, based on thermodynamic considerations, which differs to the approach used in classical thermodynamics textbooks and which includes an introductory description of the types of working fluid that are used in systems used to recover power from such sources and the criteria that must be taken into account in their selection. This is followed by a description of the mathematical modelling of twin screw machine geometry. The modelling of the thermodynamics and fluid flow through such machines is then given, together with how this is used to predict their performance. Finally a detailed description is given of systems currently used or projected both for direct expansion of the source fluid and by recovery of heat from it, which includes those which are particularly suited to the use of screw expanders in place of turbines.
A novel generalised approach to the thermodynamics of power recovery from low grade heat systemsGives criteria for working fluid selectionProvides details of, and how to model, screw expander geometryDetails how to estimate screw expander performanceSurveys types of system used for power recovery from low grade heat and where this can be improved by the use of screw expanders.

Althoughtheprinciplesofoperationofhelicalscrewmachines, ascompressors or expanders, have been well known for more than 100 years, it is only during the past 30 years that these machines have become widely used. The main reasons for the long period before they were adopted were their relatively poor e?ciency and the high cost of manufacturing their rotors. Two main developments led to a solution to these di?culties. The ?rst of these was the introduction of the asymmetric rotor pro?le in 1973. This reduced the bl- hole area, which was the main source of internal leakage by approximately 90%, and thereby raised the thermodynamic e?ciency of these machines, to roughly the same level as that of traditional reciprocating compressors. The second was the introduction of precise thread milling machine tools at - proximately the same time. This made it possible to manufacture items of complex shape, such as the rotors, both accurately and cheaply. From then on, as a result of their ever improving e?ciencies, high rel- bility and compact form, screw compressors have taken an increasing share of the compressor market, especially in the ?elds of compressed air production, and refrigeration and air conditioning, and today, a substantial proportion of compressors manufactured for industry are of this type. Despite, the now wide usage of screw compressors and the publication of many scienti?c papers on their development, only a handful of textbooks have been published to date, which give a rigorous exposition of the principles of their operation and none of these are in English

This book presents the most up-to-date methods of three-dimensional modeling of the fluid dymanics and the solid-fluid interaction within these machines, which are still being developed. Adding modeling to the design process makes it possible not only to predict flow patterns more accurately, and also to determine distorting effects on rotors and casing of pressure and temperature distribution within the compressor. Examples outline the scope of the applied mathematical model.

This book presents the most up-to-date methods of three-dimensional modeling of the fluid dymanics and the solid-fluid interaction within these machines, which are still being developed. Adding modeling to the design process makes it possible not only to predict flow patterns more accurately, and also to determine distorting effects on rotors and casing of pressure and temperature distribution within the compressor. Examples outline the scope of the applied mathematical model.

Althoughtheprinciplesofoperationofhelicalscrewmachines, ascompressors or expanders, have been well known for more than 100 years, it is only during the past 30 years that these machines have become widely used. The main reasons for the long period before they were adopted were their relatively poor e?ciency and the high cost of manufacturing their rotors. Two main developments led to a solution to these di?culties. The ?rst of these was the introduction of the asymmetric rotor pro?le in 1973. This reduced the bl- hole area, which was the main source of internal leakage by approximately 90%, and thereby raised the thermodynamic e?ciency of these machines, to roughly the same level as that of traditional reciprocating compressors. The second was the introduction of precise thread milling machine tools at - proximately the same time. This made it possible to manufacture items of complex shape, such as the rotors, both accurately and cheaply. From then on, as a result of their ever improving e?ciencies, high rel- bility and compact form, screw compressors have taken an increasing share of the compressor market, especially in the ?elds of compressed air production, and refrigeration and air conditioning, and today, a substantial proportion of compressors manufactured for industry are of this type. Despite, the now wide usage of screw compressors and the publication of many scienti?c papers on their development, only a handful of textbooks have been published to date, which give a rigorous exposition of the principles of their operation and none of these are in English