The wisdom that the 2012 code can inspire in us is to look directly at our lives, right here and now: What are our spiritual guiding principles? How can we live in greater harmony with all our personal relations? How can we embody genuine compassion? How can we become increasingly aware and self-reflective? How can we deepen our humility? How can we share our talents and gifts as a way to influence our culture and help manifest the new paradigm? How can we be of service to life, and positively contribute to the whole? How can we cultivate a balance of being and doing, receptivity and action?

On this diverse planet, we all have different strengths, different abilities, different callings. Rather than looking to the world to show us our path, we need to look deep within our spiritual being and listen to our inner sense of how to navigate these times of the great unknown.

It is essential we learn to hear the voice of our inner wisdom, our spiritual self. No one can give us wisdom; it is within all of us, born of our own direct experience. We each have our own direct connection to our spirit, and we must keep learning how to hear our divine, intuitive directives, whispering within. Th is ability to hear the voice of our inner guidance is the most practical skill we can cultivate in these times. It is what will inform us to how to synchronize in the right place at the right time.

The elevation of Mistress Lucrezia into Goddess Ira who in accordance to the Maya legend saved the world.

This book describes the process of the elevation of Mistress Lucrezia into Goddess Ira who following the Maya legend, as daughter of Maat, saves the world from its predicted end December 2012. Goddess Ira finds the help of Osiris, an archeologist, and both are pursued by a dangerous secret society who wants to prevent them from succeeding.

To be successful secret age-old legends have to be deciphered. It is the spiritual world where matter and antimatter meet.

The relationship between Goddess Ira and Osiris describes much more than the interaction between a Top and a Bottom. It gives an unique overall insight in the customs and traditions of the BDSM community. During the quest of Goddess Ira Osiris gives his ego to her. An ownership agreement of indefinite duration was concluded. There was no humiliation or task or punishment Osiris could not bear for Her and no test went too far even if these BDSM test were extreme and bizarre.

Fix Your Damn Book! is a self-help manual for writers who have finished a manuscript - a novel, novella, short story, or serial - and who want to self-edit their work to a professional standard and get it on the market. In this instructional and occasionally hilarious book, James Osiris Baldwin - an author and editor with over 8 years of experience as a freelance and staff editor - explains his technique for painlessly and successfully polishing your manuscript to a perfect glow. Fix Your Damn Book! will guide you through: - The seven essential components of successful editing - Getting into the right headspace to edit your own work - Objectively diagnosing problems in your manuscript - The secrets of developmental editing and line editing - Hacks for sharpening your story, character, and dialogue - Grammar, spelling, punctuation, passive voice and tense - Recruiting and making the most out of your first readers - Proofreading and publishing your finished book

The field of mechatronics (which is the synergistic combination of precision mechanical engineering, electronic control and systems thinking in the design of products and manufacturing processes) is gaining much attention in industries and academics. It was detected that the topics of computer vision, control and robotics are imperative for the successful of mechatronics systems. This book includes several chapters which report successful study cases about computer vision, control and robotics. The readers will have the latest information related to mechatronics, that contains the details of implementation, and the description of the test scenarios.

Orlando volvia casa despues de treinta largos anos. Aunque, tenia miedo de su pasado... Deseaba descubrir: Quienes lo hicieron? Por que...lo hicieron? Era la unica manera de matar ese pasado. Lo hacia por ellos, se lo debia a ellos. Descubre el mundo de: La casa sin ventanas.

The two-volume set IFIP AICT 639 and 640 constitutes the refereed post-conference proceedings of the 18th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2021, held in Curitiba, Brazil, during July 11-14, 2021. The conference was held virtually due to the COVID-19 crisis.The 107 revised full papers presented in these proceedings were carefully reviewed and selected from 133 submissions. The papers are organized in the following topical sections: Volume I: Sustainability, sustainable development and circular economy; sustainability and information technologies and services; green and blue technologies; AI and blockchain integration with enterprise applications; PLM maturity, PLM implementation and adoption within industry 4.0; and industry 4.0 and emerging technologies: Volume II: Design, education and management; lean, design and innovation technologies; information technology models and design; and models, manufacturing and information technologies and services.

This book covers the most important topics in the field of personalized orthopedics. It starts with the 3D geometry of the bones, focusing on the problem of reverse engineering of the bones. It also shows the application of a 3D geometric model of bone for the design of personalized implants and prostheses. This book covers the application of additive technologies in personalized orthopedics as well as prediction, simulation and optimization in personalized orthopedics. Its content provides the necessary knowledge for the transition from classical to personalized orthopedics. The authors present an original method for reverse bone engineering-the Method of Anatomical Features (MAF). This method is unique as it enables the reconstruction of the original geometry and topology of the bone, even when only data on its part are available. The application of this method is shown on the examples of human long bones, mandible and hip bone reconstruction. This book contains a review of several real cases of personalized implants. It gives several examples of prostheses for the design of which a 3D model of bones was used, as well as other patient data on the basis of which personalized prostheses were designed.

The two-volume set IFIP AICT 639 and 640 constitutes the refereed post-conference proceedings of the 18th IFIP WG 5.1 International Conference on Product Lifecycle Management, PLM 2021, held in Curitiba, Brazil, during July 11-14, 2021. The conference was held virtually due to the COVID-19 crisis.The 107 revised full papers presented in these proceedings were carefully reviewed and selected from 133 submissions. The papers are organized in the following topical sections: Volume I: Sustainability, sustainable development and circular economy; sustainability and information technologies and services; green and blue technologies; AI and blockchain integration with enterprise applications; PLM maturity, PLM implementation and adoption within industry 4.0; and industry 4.0 and emerging technologies: Volume II: Design, education and management; lean, design and innovation technologies; information technology models and design; and models, manufacturing and information technologies and services.

This book covers the most important topics in the field of personalized orthopedics. It starts with the 3D geometry of the bones, focusing on the problem of reverse engineering of the bones. It also shows the application of a 3D geometric model of bone for the design of personalized implants and prostheses. This book covers the application of additive technologies in personalized orthopedics as well as prediction, simulation and optimization in personalized orthopedics. Its content provides the necessary knowledge for the transition from classical to personalized orthopedics. The authors present an original method for reverse bone engineering—the Method of Anatomical Features (MAF). This method is unique as it enables the reconstruction of the original geometry and topology of the bone, even when only data on its part are available. The application of this method is shown on the examples of human long bones, mandible and hip bone reconstruction.  This book contains a review of several real cases of personalized implants. It gives several examples of prostheses for the design of which a 3D model of bones was used, as well as other patient data on the basis of which personalized prostheses were designed.

This book constitutes the proceedings of the 14th Mexican Conference on Pattern Recognition, MCPR 2022, which was held in planned to be held Ciudad Juarez, Mexico, in June 2022. The 33 papers presented in this volume were carefully reviewed and selected from 66 submissions. They are organized in the following topical sections: pattern recognition techniques; neural networks and deep learning; image and signal processing and analysis; natural language processing and recognition; robotics and remote sensing applications of pattern recognition; medical applications of pattern recognition.

This book presents a model (HUNE) that assists in the insertion of human aspects in the product development process (PDP), at the beginning of a project, at the analyzed information, during its development and post-development, evaluating its suitability for human beings. The model proved to be actual with respect to the existing ones, dynamic and flexible, because it does not replace any model, but can be applied to other models, methods, or structures of PDPs, and enables scope, replication, and future improvements. Its applications brought satisfactory results, and it was very well evaluated by the participants in the application, by external experts and also through scientific publications.

The field of mechatronics (which is the synergistic combination of precision mechanical engineering, electronic control and systems thinking in the design of products and manufacturing processes) is gaining much attention in industries and academics. It was detected that the topics of computer vision, control and robotics are imperative for the successful of mechatronics systems. This book includes several chapters which report successful study cases about computer vision, control and robotics. The readers will have the latest information related to mechatronics, that contains the details of implementation, and the description of the test scenarios.