This book provides key ideas for the design and analysis of complex energy management systems (EMS) for distributed power networks. Future distributed power networks will have strong coupling with (electrified) mobility and information-communication technology (ICT) and this book addresses recent challenges for electric vehicles in the EMS, and how to synthesize the distributed power network using ICT. This book not only describes theoretical developments but also shows many applications using test beds and provides an overview of cutting edge technologies by leading researchers in their corresponding fields. Describes design and analysis of energy management systems; Illustrates the synthesis of distributed energy management systems based on aggregation of local agents; Discusses dependability issues of the distributed EMS with emphasis on the verification scheme based on remote-operational hardware-in-the-loop (HIL) simulation and cybersecurity.

To tackle the challenges of the road estimation task, many works employ a fusion of multiple sources. By that, a commonly made assumption is that the sources always are equally reliable. However, this assumption is inappropriate since each source has certain advantages and drawbacks depending on the operational scenarios. Therefore, Tuan Tran Nguyen proposes a novel concept by incorporating reliabilities into the multi-source fusion so that the road estimation task can alternately select only the most reliable sources. Thereby, the author estimates the reliability for each source online using classifiers trained with the sensor measurements, the past performance and the context. Using real data recordings, he shows via experimental results that the presented reliability-aware fusion increases the availability of automated driving up to 7 percentage points compared to the average fusion.About the Author: Tuan Tran Nguyen received the Master's degree in computer science and the Ph.D. degree from Otto-von-Guericke University Magdeburg, Germany, in 2013 and 2019, respectively. His research focuses on methods and architectures for reliability-based sensor fusion in intelligent vehicles.

This book by Vietnamese and Russian authors is the first of its kind and combines the extensive knowledge on the petrology and metallogeny of the late Paleozoic - early Mesozoic and Cenozoic periods in North Vietnam. The Permian - Triassic and Paleogene volcano-plutonic and plutonic associations are two important geological events in the evolutionary history of Southeast Asia, including the 260 - 250 Ma Emeishan mantle plume and Indian-Eurasia collision at 60 - 55 M. The volume includes 9 chapters, divided into 3 parts. Part 1 introduces the geological structure of North Vietnam; Part 2 covers the Permian - Triassic magma associations and metallogeny; and Part 3 focuses on the Cenozoic magma associations and metallogeny. In each chapter, the geological setting of magmas, classification of different geological structures, and composition characteristics, such as mineralogy, geochemistry, isotope systematics and geochronology are discussed. This book represents an important reference document for international and Vietnamese geologists engaged in the geological history and metallogeny of Vietnam, an important area of the Asian continent. The monograph also has a practical significance in contributing new premises and to assess rare and precious mineral prospects. In addition, it can be regarded as a necessary data base for petrological and metallogenic projects and university courses.

This book by Vietnamese and Russian authors is the first of its kind and combines the extensive knowledge on the petrology and metallogeny of the late Paleozoic - early Mesozoic and Cenozoic periods in North Vietnam. The Permian - Triassic and Paleogene volcano-plutonic and plutonic associations are two important geological events in the evolutionary history of Southeast Asia, including the 260 - 250 Ma Emeishan mantle plume and Indian-Eurasia collision at 60 - 55 M. The volume includes 9 chapters, divided into 3 parts. Part 1 introduces the geological structure of North Vietnam; Part 2 covers the Permian - Triassic magma associations and metallogeny; and Part 3 focuses on the Cenozoic magma associations and metallogeny. In each chapter, the geological setting of magmas, classification of different geological structures, and composition characteristics, such as mineralogy, geochemistry, isotope systematics and geochronology are discussed. This book represents an important reference document for international and Vietnamese geologists engaged in the geological history and metallogeny of Vietnam, an important area of the Asian continent. The monograph also has a practical significance in contributing new premises and to assess rare and precious mineral prospects. In addition, it can be regarded as a necessary data base for petrological and metallogenic projects and university courses.

This book provides key ideas for the design and analysis of complex energy management systems (EMS) for distributed power networks. Future distributed power networks will have strong coupling with (electrified) mobility and information-communication technology (ICT) and this book addresses recent challenges for electric vehicles in the EMS, and how to synthesize the distributed power network using ICT. This book not only describes theoretical developments but also shows many applications using test beds and provides an overview of cutting edge technologies by leading researchers in their corresponding fields. Describes design and analysis of energy management systems; Illustrates the synthesis of distributed energy management systems based on aggregation of local agents; Discusses dependability issues of the distributed EMS with emphasis on the verification scheme based on remote-operational hardware-in-the-loop (HIL) simulation and cybersecurity.

3D printed electronics have captured much attention in recent years, owing to their success in allowing on-demand fabrication of highly-customisable electronics on a wide variety of substrates and conformal surfaces. This textbook helps readers understand and gain valuable insights into 3D printed electronics. It does not require readers to have any prior knowledge on the subject.3D Printing and Additive Manufacturing of Electronics: Principles and Applications provides a comprehensive overview of the recent progress and discusses the fundamentals of the 3D printed electronics technologies, their respective advantages, shortcomings and potential applications. The book covers conventional contact printing techniques for printed electronics, 3D electronics printing techniques, materials and inks inks for 3D-printed electronics, substrates and processing for 3D-printed electronics, sintering techniques for metallic nanoparticle inks, designs and simulations, applications of 3D-printed electronics, and future trends. The book includes several related problems for the reader to test his or her understanding of the topics.This book is a good guide for anyone who is interested in the 3D printing of electronics. The book is also an effective textbook for undergraduate and graduate courses that aim to arm their students with a thorough understanding of the fundamentals of 3D printed electronics.Related Link(s)

3D printed electronics have captured much attention in recent years, owing to their success in allowing on-demand fabrication of highly-customisable electronics on a wide variety of substrates and conformal surfaces. This textbook helps readers understand and gain valuable insights into 3D printed electronics. It does not require readers to have any prior knowledge on the subject.3D Printing and Additive Manufacturing of Electronics: Principles and Applications provides a comprehensive overview of the recent progress and discusses the fundamentals of the 3D printed electronics technologies, their respective advantages, shortcomings and potential applications. The book covers conventional contact printing techniques for printed electronics, 3D electronics printing techniques, materials and inks inks for 3D-printed electronics, substrates and processing for 3D-printed electronics, sintering techniques for metallic nanoparticle inks, designs and simulations, applications of 3D-printed electronics, and future trends. The book includes several related problems for the reader to test his or her understanding of the topics.This book is a good guide for anyone who is interested in the 3D printing of electronics. The book is also an effective textbook for undergraduate and graduate courses that aim to arm their students with a thorough understanding of the fundamentals of 3D printed electronics.Related Link(s)