3mm hardboard available in the standard sizes: A5, A4, A3, A2, A1, A0

These are perfect for painting on a panel.

Velcro stick on tape is an easy to use alternative to nails and screws. To use, clean and dry both surfaces. Cut tape to length. Peel backing paper and press firmly to surfaces. Allow adhesive 10 minutes to set (or longer for heavier items) before attaching hook and loop. The adhesive reaches maximum strength after 24 hours.

Velcro brand Stick On Coins are an easy to use alternative to pins, nails and screws and more convenient than messy glue and sticky tape as items can be fixed permanently or removed and interchanged in seconds. Colour: White Size: 16mm Quantity: 16

When extra strength is needed Velcro brand Heavy Duty Stick On provides just that. Incorporating a 50% stronger closure and weather resistant adhesive that can be used indoors and out, securing items such as large pictures, wall hangings, rugs, heavy torches and tools has never been so quick or easy. Holds up to 7kg per 50mm x 50mm square piece or 4kg per 45mm "giant" coin.

Hang pictures with wire or cord and align frames perfectly without wall damage. High performance adhesive - holds on strongly. Easy to put up - no need for nails or screws. Easy to remove - innovative stretch release technology leaves no surface damage. Each hanger holds up to 2kg in weight (4lb).

Strong brown craft/framing tape made in Japan. This high quality tape is non-slip, stackable and writable. Each roll contains 50m of tape. Available in 25mm, 38mm, 50mm and 75mm widths.

Velcro stick on squares are an easy to use alternative to nails and screws. To use, clean and dry both surfaces. Cut tape to length. Peel backing paper and press firmly to surfaces. Allow adhesive 10 minutes to set (or longer for heavier items) before attaching hook and loop. The adhesive reaches maximum strength after 24 hours. Colour: White Size: 25mm Quantity: 24

3mm hardboard available in the standard sizes: A5, A4, A3, A2, A1, A0

These are perfect for painting on a panel.

Aluminum 32" rail features channel rail on one side and dual scale on the other. Channel rail is compatible with Foamwerks Straight Cutter and V-Groove Cutter.

for inserting glazier points into frames. Contains 20 points.Specifications..

The Spool holds 150 Metres of wire.

This is a hardened nail with a friction-fit sliding collar.

It is designed for medium hard wall surfaces.

As the nail is driven in the collar stays flush with the wall surface, minimising any possible sagging of the nail.

Leave approximately. 8mm protruding to take the picture cord or wire. For pictures up to 1kg.

Please take care to ensure the nail is secure in the wall before hanging your work.

Twelve Flexi Plates to affix canvases into Jackson's Easy Assemble Frames or any wood frame.

If needed bend into a 'Z'-shape with pliers or on the edge of a table to accomodate canvases than are higher or lower than the back of the frame.

The Flexi Plates will follow the contours.

For Combi Frame Box frame style A, flush, with no rebate (ledge).For 18mm canvas.Specifications..

12 x Canvas offset clips 18mm and 1 sawtooth hanger

Combiframe is a frame system that has been developed for

creative people to replace expensive custom made frames.

Fantastic plain wooden frames suitable for all types of framing,

can be stained, painted, varnished or left as they are.

Simply select the sizes of the frames you require eg. 12x16“

canvas board will require one pair of 12“ frames and one

pair of 16“ frames. Aline the frames face down and insert the

dove tail joiners into the back of the frame corners. Easy!

No tools are required. Available in the three mouldings. 13/16” has a 5/32“

rebate and should be used for canvas boards, panels, mounted

watercolours, backed watercolours, clip frames and glazed work.

Slightly curved, light, close - grained wood ideal for hand finishing. Responds well to varnish, wax, stain and metal leaf. Most suitable for panels, paper based work with a backing board and glazing and photographs.

Dimensions: 3cms across the top, 1.2cms rebate, 1.5cms depth.

Use with FC3 Panel clips – Please note these clips will change and be nail in not push in. Or use your glazier point and glazier tool.

Specifications.

Width = 1 3/6in

Rebate = 5/32in

Depth = 3/4in

The simplest way to hold a canvas in

place. Tap one end into the rebate of the moulding, do this with 4-

10 clips, drop the canvas in, bend over and tap the other end into

the back of the stretcher bar.

The Logan Rigid inserts affix the canvas to the frame more firmly than the flexible inserts, requiring the insert to be removed from the frame if you wish to take out the canvas.

These inserts need to be applied in conjunction with the Logan Fitting Tool F400-1.
                      
Model numbers, compatible point drivers and quantities

• Logan F9 > 400 x Multipoint Insert - Fits F400-1
• Logan F10 > 400 x Rigid Insert - Fits F400-1     
• Logan F11 > 400 x Flexible Insert - Fits F400-1     
• Logan F12 > 300 x Brad Nails - Fits F400-1
• Logan F53 > 600 x Flexible Point Strips - Fits F500-2
• Logan F54 > 600 x Rigid Point Strips - Fits F500-2     
• Logan F55 > 2500 x Flexible Point Strips - Fits F500-2     
• Logan F56 > 2500 x Rigid Point Strips - Fits F500-2

The flexibility of the inserts enables the canvas to be removed from the frame after the frame has been constructed, but without having to re-install the inserts. These inserts are to be used in conjunction with the Logan Dual Drive Point Driver F500-1. Model Qty Description Fits Logan F9 400 Multipoint Insert F400-1 Logan F10 400 Rigid Insert Logan F11 400 Flexible Insert Logan F12 300 Brad Nails Logan F53 600 Flexible Point Strips F500-2 Logan F54 600 Rigid Point Strips Logan F55 2500 Flexible Point Strips Logan F56 2500 Rigid Point Strips

A favourite for hinging window mats to backing boards or attaching art. The very fine linen cloth is flexible yet strong. The neutral pH acrylic adhesive gains strength overnight. The adhesive is permanent, non-yellowing and stable over time. This tape is pressure sensitive.

Mounting Corners and Strips are for mounting light to moderate weight prints, photographs and documents without adhesives ever coming in contact with the artwork. Artwork can always be removed in its original, pristine condition. Safe and acid-free. Full view variety minimises the border required to hide the corner under the window mount.

Coated on one face with sticky, pressure-sensitive adhesive, protected with a release paper. This is ideal for mounting many kinds of lightweight prints and photographs. Fold back 1cm (0. 5in) strip of the release paper along one edge, then position the item to be mounted.