SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your PS4 Console:

This skin will fit the PS4 Standard Console. (Will not fit the Pro or Slim console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected witha cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:

-Covers PS4 Bottom, Top & Sides
-Covers 2 x Controllers
-Thin and tough protects from minor scratches
-Easy, bubble-free installation and sticky free removal
-No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected witha cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your PS4 Slim Console:

This skin will fit the PS4 Slim Console. (Will not fit the Standard or Pro console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:

-Covers PS4 Bottom, Top & Sides
-Covers 2 x Controllers
-Thin and tough protects from minor scratches
-Easy, bubble-free installation and sticky free removal
-No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your Xbox X Console:

This skin will fit the Xbox X Console. (Will not fit the Xbox Standard or S console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:
• Covers complete console, two controllers and the Kinect
• Thin and tough protects from minor scratches
• Easy, bubble-free installation and sticky free removal
• No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your PS4 Console:

This skin will fit the PS4 Standard Console. (Will not fit the Pro or Slim console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected witha cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:

-Covers PS4 Bottom, Top & Sides
-Covers 2 x Controllers
-Thin and tough protects from minor scratches
-Easy, bubble-free installation and sticky free removal
-No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected witha cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

REALISM AND AUTHENTICITY
 - 13 cm tall gear stick with knob
 - Realistic gear-shifting feel
 - Detachable knob
 - Compatible with real universal knobs (available in car tuning shops)
 - 2 shift-plates included: "H"-pattern (7+1) and Sequential (+/-)

STURDINESS AND PRECISION
 - 100% metal internal mechanism
 - 100% metal gear stick
 - 100% metal clamping system
 - H.E.A.R.T HallEffect AccuRate Technology
 - Precision that won’t decrease over time (contactless magnetic sensor)
 - No tact switch and no potentiometer (for unlimited product lifespan)
 
ADAPTABILITY AND COMFORT
 - Upgradable firmware, and internal memory with adjustable gear-shift travel to suit your driving style (software available for download on PC)
 - Adjustable resistance when shifting gears
 - Shift-plate position and rotation adjustable by 360°
 - Clamping system position and rotation adjustable by 360°
 - Optimized clamping for any support surface
 - Tables or shelves from 1 to 55 mm in thickness
 - Cockpits (built-in screw threads + removable clamping system)
 
VERSATILITY
 - Unique design allowing for 2 different driving styles
 - "H"-pattern (7+1)
 - Sequential (+/-)

USB and/or DIN connectivity
 - On PC: works with all racing wheels on the market
 - On PS3 and PS4: works with the T500RS, Ferrari F1 Wheel Integral T500, T300RS and T300 Ferrari GTE racing wheels
 - On Xbox One: works with the TX Racing Wheel

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your PS4 Slim Console:

This skin will fit the PS4 Slim Console. (Will not fit the Standard or Pro console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:

-Covers PS4 Bottom, Top & Sides
-Covers 2 x Controllers
-Thin and tough protects from minor scratches
-Easy, bubble-free installation and sticky free removal
-No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

*Console not included!!!

The easiest way to protect and style your PS4 Standard Console:

This skin will fit the standard PS4 Console. (Will not fit the SLIM or PRO console)

Description:
Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a matt finish. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional inkjet printers.

Specifications:

• Covers PS4 Bottom, Top & Sides
• Covers 2 x Controllers
• Thin and tough protects from minor scratches
• Easy, bubble-free installation and sticky free removal
• No Cutting required

What is a skin?
Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Dont be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!
Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG
SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt finish. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN
SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN
The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT
SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide
1. Prep your work table: You need a flat area. Make sure its clean. Avoid any dust, stray hairs and food from last nights dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure theres no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. Weve found its best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. Youre done! Youve just installed your first custom skin. Now go show off your newly skinned device to the world!

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your Xbox Console:

This skin will fit the Standard Xbox Console. (Will not fit the Xbox S or X console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:
• Covers complete console, two controllers and the Kinect
• Thin and tough protects from minor scratches
• Easy, bubble-free installation and sticky free removal
• No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your PS4 Pro Console:

This skin will fit the PS4 Pro Console. (Will not fit the Standard or Slim console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:

-Covers PS4 Bottom, Top & Sides
-Covers 2 x Controllers
-Thin and tough protects from minor scratches
-Easy, bubble-free installation and sticky free removal
-No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

Charging Station for two PS4® DualShock®4 controllers with Easy & Safe™ Plug-less contacts
Two Easy & Safe™ plugs to connect the PS4® controllers and the charging station protecting controller’s charging plugs by damages
Two Front LED lights
USB charging cable to connect to the console

10-in-1 Super Charging Dock with 2 cooling fans and 4 Controller Charging Stations

4. Powerful station to charge 2 controllers simultaneously for dual players. At the same time, the cooling fans dissipate heat from the main engine.

Features:

- Charging position keeps the unit steady while vertical with the controller charging function.
- 4-in-1 charging station and storage dock.
- Powerful station to charge up to 2 controllers simultaneously for dual players. Enhance the family fun gaming experience.
- Four 3.0 themes with powerful output to meet the need of game fanciers.
- High DC input through 2 charging cables.
- With 2 cooling fans to extend the life of your console.

Specifications:
-Compatible with: Playstation 4 (Only)
- Black color
- Product size: 36 * 18 * 3.5cm / 14.4 * 7.2 * 1.4in
- Package size: 38 * 19.5 * 4cm / 15.2 * 7.8 * 1.6in
- Package weight: approx. 590g / 20.81oz

Note:
- Do not modify and dismantle.
- Don't clean it up with the organic matter.
- Do not place any heavy objects on the product.
- Do not throw a drop or apply a strong shock to the product.

Raz Tech has a wide range of High-Quality cellular and computer accessories (Glass screen protectors, Screen Protectors, Cases, Batteries, Earphones, Headphones, USB cables, Bluetooth keyboards) at competitive prices. We strive to provide accessories for every kind of device and brand sold in South Africa (Apple, Sony, Huawei, Samsung, HTC, Blackberry, LG).

- Colour - Black
- Material- Plastic
- PS5 Twin Charging Dock - For PS5 Dual sense controllers
- LED Indication - Show Charge status
- Connection type - USB Type -C

DESIGNED FOR PS5 :
- This twin charging dock is made and optimized for the New Sony PS5 DualSense Wireless controllers, easy to use compatible accessory for the PlayStation 5.

LED STATUS INDICATORS :
-The LED icons will show the status of the charge to let you know when your PS5 controllers are fully charged.

EASY TO USE :
- Fully compatible with the PS5 as comes with a USB Type-C cable for fast charging. The product is all one piece so you don’t lose any parts.

COMFORTABLE SIMPLICITY :
- It's easy to use, just slot the PS5 controller in the dock when you’re not gaming then they will be charged automatically.

Raz Tech has a wide range of High-Quality cellular and computer accessories (Glass screen protectors, Screen Protectors, Cases, Batteries, Earphones, Headphones, USB cables, Bluetooth keyboards) at competitive prices. We strive to provide accessories for every kind of device and brand sold in South Africa (Apple, Sony, Huawei, Samsung, HTC, Blackberry, LG).

PS5 Charging Station Stand Fan with Dual Cooling Fan Controller Charger Console

For PS5 Vertical Cooling Fan Stand For Playstation 5 Digital Edition With 3 Axis Port Dual Controller Charging Station Charger For DualSense
Feature: For
PS5 Console Or For PS5 Console Digital Edition.
The included 3 USB ports can extend USB functionality and easy to use.
It includes two charging connectors for the DualSense controllers at the same time.
With charging indicator for charging the controller: red when charging, green when fully charged.
Includes two cooling fans. 3000RPM, with the power button, can quickly and effectively cool down the console.

Specifications:
Input: DC 2A
Output: 0.5-1A
Fan Speed: 3000RPM
Interface: 3 * USB Type-A for USB Devices, 2 * USB Type-C Connectors for DualSense Charging Controller
Application: for PS5 or for PS5 Digital Edition, For DualSense controllers

Note:
1. There might be slight size differences due to manual measurement, different measuring methods, and tools.
2. The picture may not reflect the actual color of the item due to the different photography lights, angles and screen displays.

For Playstation 5 handle silicone protective cover

- Soft Texture,
- Good Hand Feeling,
- Super Abrasion Resistance,
- All-Round Anti-Wear
- Anti-Slip and the operation will not be affected at all after installation dust-proof, Sweatproof, Anti-squeeze

Product features:

1. Made of high-quality silica gel material.
2. It has a good buffering effect when falling down carelessly, which can protect your handle from damage.
3. Soft texture, excellent feel.
4. Light weight, good skid resistance.

Raz Tech has a wide range of High-Quality Cellular, Computer accessories, and Gaming Accessories (Glass screen protectors, Screen Protectors, Cases, Batteries, Earphones, Headphones, USB cables, Bluetooth keyboard) at competitive prices. We strive to provide accessories for every kind of device and brand sold in South Africa (Apple, Sony, Huawei, Samsung, HTC, Blackberry, LG).

1. Tailor-made for the PS5 controller, super fit.

2. Made of a new type of transparent PC material, environmentally friendly, non-toxic, no harm to the human body, special materials make it impossible for dust to the surface

3. Using new material technology to make the crystal box as clean and clear as clear water, with clear visual effects and streamlined design, showing a different taste and style.
4. Suitable for protecting and storing PS5 controller

5. The highly flexible protective cover can be easily installed and removed.

6. The soft rubber material can make you feel handy.

7. Material: PC

1. Tailor-made for the PS5 controller, super fit.

2. Made of a new type of transparent PC material, environmentally friendly, non-toxic, no harm to the human body, special materials make it impossible for dust to the surface

3. Using new material technology to make the crystal box as clean and clear as clear water, with clear visual effects and streamlined design, showing a different taste and style.
4. Suitable for protecting and storing PS5 controller

5. The highly flexible protective cover can be easily installed and removed.

6. The soft rubber material can make you feel handy.

7. Material: PC

*Console not included!!!

The easiest way to protect and style your PS4 Slim Console:
This skin will fit the PS4 Slim Console. (Will not fit the Standard or PRO console)

Description:
Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a matt finish. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional inkjet printers.

Specifications:
• Covers PS4 Bottom, Top & Sides
• Covers 2 x Controllers
• Thin and tough protects from minor scratches
• Easy, bubble-free installation and sticky free removal
• No Cutting required

What is a skin?
Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Dont be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!
Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG
SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt finish. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN
SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN
The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT
SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide
1. Prep your work table: You need a flat area. Make sure its clean. Avoid any dust, stray hairs and food from last nights dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure theres no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. Weve found its best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. Youre done! Youve just installed your first custom skin. Now go show off your newly skinned device to the world!

*Console not included!!!

The easiest way to protect and style your PS4 Standard Console:

This skin will fit the standard PS4 Console. (Will not fit the SLIM or PRO console)

Description:
Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a matt finish. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional inkjet printers.

Specifications:

• Covers PS4 Bottom, Top & Sides
• Covers 2 x Controllers
• Thin and tough protects from minor scratches
• Easy, bubble-free installation and sticky free removal
• No Cutting required

What is a skin?
Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Dont be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!
Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG
SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt finish. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN
SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN
The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT
SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide
1. Prep your work table: You need a flat area. Make sure its clean. Avoid any dust, stray hairs and food from last nights dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure theres no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. Weve found its best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. Youre done! Youve just installed your first custom skin. Now go show off your newly skinned device to the world!

PS4 Bluetooth Adapter Playstation 4 Bluetooth Dongle



Features:

- Bluetooth V4.0 specification compliance and specially designed for Sony PS4 (PlayStation 4) to solve the wireless problem.

Enables your PS4(playstation 4) to wirelessly communicate with Bluetooth-enabled devices, like Bluetooth headphones, Bluetooth speakers, Bluetooth smartphone headsets and more.

Working distance up to 33 feet(10 meters) with no obstruction for PS4.

Easy to use, enable bluetooth capabilities on your PS4 by simply plugging this compact adapter into an available USB port on PS4.


Package include:

1 x Dongle

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your PS4 Slim Console:

This skin will fit the PS4 Slim Console. (Will not fit the Standard or Pro console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:

-Covers PS4 Bottom, Top & Sides
-Covers 2 x Controllers
-Thin and tough protects from minor scratches
-Easy, bubble-free installation and sticky free removal
-No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

Get Exclusive Project Cars Skins
When you order G29 Driving Force Racing Wheel
All your controls are where you can reach them. The D-Pad, buttons and paddle shifters are incorporated into the racing wheel. LED indicator lights positioned just above the center of the wheel tell you exactly when to up- or down-shift. You maintain maximum acceleration without taking your eyes off the track. A 24-point selection dial and the +/- buttons on the front of the wheel let you further fine-tune your driving preferences

For PlayStation 3 and PlayStation 4
Enhance your console experience
You will never want to race with a regular controller again after you add Driving Force to your controller selection.

G29 game steering wheel is designed for the latest racing games for your PlayStation®4 or PlayStation®3 console. G29 Driving Force also works on your PC using Logitech Gaming Software.

Dual-Motor Force Feedback
Feel every weight shift, and tire slip
Feel your tires on every turn and type of terrain, sense under- or over-steer drifting and more. Powerful dual-motor force feedback realistically simulates force effects so you can respond with precision.

Quality Construction
Race-ready materials that can handle it all
Driving Force handles the stress of racing action and is built for long-lasting reliability. G29 has solid steel ball bearings in the wheel shaft and stainless steel paddle shifters and pedals. The race wheel is covered in high-quality, hand-stitched leather, giving it the look and feel of a high-performance racecar wheel and giving you a more comfortable, durable experience.

Helical Gearing with Anti-Backlash
Tight, smooth, precise control
You get an exceptionally smooth, quiet steering action. Helical gears are modeled after gears used in automotive transmissions to reduce unwanted noise and vibration. Anti-backlash keeps the wheel and pedals tight, maximizing your control. G29 Driving Force Racing Wheel features a long lasting, reliable hall-effect steering sensor, using magnetic fields to sense the position of the wheel.

Easy-Access Game Controls
Control right at your fingertips
All your controls are where you can reach them. The D-Pad, buttons and paddle shifters are incorporated into the racing wheel. LED indicator lights positioned just above the center of the wheel tell you exactly when to up- or down-shift. You maintain maximum acceleration without taking your eyes off the track. A 24-point selection dial and the +/- buttons on the front of the wheel let you further fine-tune your driving preferences.

Responsive Floor Pedal Unit
Adjustable for maximum control
Maintain a more realistic driving body position with the separate floor pedal unit with integrated throttle, brake, and clutch pedals. G29 Driving Force lets you comfortably accelerate, brake and change gears with the feel of an actual car.

The nonlinear brake pedal mimics the performance of a pressure-sensitive brake system for a more responsive, accurate braking feel. For even finer control, reposition the pedal faces to make heel-toe maneuvers easier to perform.
Rubber feet for hard surfaces and a patented retractable carpet grip system help your pedals stay right where you put them.

Mounts Securely
Performance that stays where you want it
Drive fearlessly knowing the wheel won’t shift during aggressive maneuvers. The racing wheel mounts securely to your table or racing rig via built-in clamps or screw mounting points.

Take your racing to the next level with a Playseat® racing simulation cockpit.

900° Steering
For realistic turns on the track
The 900-degree lock-to-lock rotation of the G29 Driving Force means you can turn the wheel two and a half times. It’s the same degree of motion as a steering wheel inside a car.

Steering Wheel Stripe
Stay oriented in the right direction
Easily see if your steering is dialed in using a visual cue within your peripheral vision. The steering wheel stripe is a visual indicator of which direction the wheel is pointing.

Works with Driving Force Shifter Attachment
Pinpoint gear selection
Complete your racing rig for the most realistic experience. Add the 6-speed manual Driving Force shifter to your racing wheel setup.

Functions:
- Bluetooth Wireless Gamepad with all function For PS4
- Connecting Tech: Wireless
- Cover Range: 8m to 10m (30 Feet)
- Interface: USB
- Plug-and-Play: Yes
- Ergonomic Engineering: Yes
- Vibration: Dual-Motor Vibration
- Compatible System: PC/PS4/Android

Raz Tech has a wide range of High-Quality cellular and computer accessories (Glass screen protectors, Screen Protectors, Cases, Batteries, Earphones, Headphones, USB cables, Bluetooth keyboards) at competitive prices. We strive to provide accessories for every kind of device and brand sold in South Africa (Apple, Sony, Huawei, Samsung, HTC, Blackberry, LG).

*Console not included!!!

The easiest way to protect and style your PS4 Standard Console:

This skin will fit the standard PS4 Console. (Will not fit the SLIM or PRO console)

Description:
Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a matt finish. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional inkjet printers.

Specifications:

• Covers PS4 Bottom, Top & Sides
• Covers 2 x Controllers
• Thin and tough protects from minor scratches
• Easy, bubble-free installation and sticky free removal
• No Cutting required

What is a skin?
Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Dont be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!
Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG
SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt finish. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN
SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN
The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT
SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide
1. Prep your work table: You need a flat area. Make sure its clean. Avoid any dust, stray hairs and food from last nights dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure theres no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. Weve found its best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. Youre done! Youve just installed your first custom skin. Now go show off your newly skinned device to the world!

*Console not included!!!

The easiest way to protect and style your PS4 PRO Console:

This skin will fit the PS4 PRO Console. (Will not fit the Standard or Slim console)

Description:
Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a matt finish. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional inkjet printers.

Specifications:
• Covers PS4 Bottom, Top & Sides
• Covers 2 x Controllers
• Thin and tough protects from minor scratches
• Easy, bubble-free installation and sticky free removal
• No Cutting required

What is a skin?
Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Dont be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!
Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG
SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt finish. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN
SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN
The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT
SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide
1. Prep your work table: You need a flat area. Make sure its clean. Avoid any dust, stray hairs and food from last nights dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure theres no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. Weve found its best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. Youre done! Youve just installed your first custom skin. Now go show off your newly skinned device to the world!