Universal strong dual-component epoxy adhesive for repairing metal, pottery, porcelain, glass, pearls, precious stones and various synthetics. Temperature resistant, water resistant, chemical resistant and paintable.

Application
Suitable for: Repairs to metal, ceramics, porcelain, crystal, glass, pearls, precious stones and various synthetics (polyester, bakelite, formica, rigid polystyrene and acrylic glass (Perspex®).
Not suitable for: Polyethylene (PE), polypropylene (PP), PTFE and silicone rubber.

Handling
Before use: Working conditions- Only apply at temperatures between +10 °C and +35 °C. Product cures by mixing the resin and the hardener.
Surface requirements: The surface must be dry, clean and free of dust and grease.
Preliminary surface treatment: Degrease parts to be bonded with methylated spirit. Roughen smooth surfaces (sandpaper).
Tools: Mix the components by means of the supplied mixing bowl and spatula.
Mixture ratio: 1:1
Coverage: 1 ml = approx 10 cm² at a film thickness of 1 mm

Directions For Use:
Press out an equal amount of both components onto the enclosed mixing tray.
Mix these two equal parts well with a spatula until a mixture is obtained with a homogeneous colour.
Apply the mixture, which at room temperature (+20 °C) remains toolable for about 1.5 hours, as a thin layer on one of the two materials.
Join the materials and keep them in place for 7 hours.
Be careful not to move the parts before the adhesive has cured.
Resin and hardener must not come into contact with each other unless for usage.

Advice
Some types of synthetics can not be joined such as polyethylene and polypropylene. Use a piece of adhesive tape in order to keep the parts in place while the adhesive is curing.

Points of attention
Close well after use.
For optimum performance it is important to create a larger amount of adhesive and mix it very well.
Curing time depends on the temperature.
Adhesive does not cure below +5 °C.
Stains/residue: Remove wet stains immediately with warm water and soap. Cured adhesive residue can only be removed mechanically.

Storage conditions: Store in tightly closed packaging in a dry, cool and frost-free place.

Super-strong universal contact adhesive based on neoprene rubber. For innumerable repair and DIY jobs that require immediate bonding. Extremely suitable for materials under strain. Moisture and frost proof. Resistant to temperatures between -15 °C and +70 °C.

Suitable for:
Ideally suited for surface bonding or laminating of many materials that require immediate bonding, loading or processing.
Bonds wood, board, veneer, plastic and metal panel boards (HPL, Formica®, for example), (foam) rubber, leather, cork, canvas, linoleum and polyether foam (sound insulation), among other things, to itself as well as to many other surfaces.
Also for repairing shoes, bags, toys and carpets, or for doing (hobby) handicraft work.

Not suitable for: Polystyrene foam (Tempex®), PE, PP, PTFE and vinyl.

Working conditions: Use adhesive and parts to be bonded at room temperature only. The relative humidity must be below 65 %. This is to avoid formation of bubbles in the final product. Once attached, adjustment is no longer possible. Always test on an (inconspicuous) part of the surface first.
Surface requirements: Surfaces must be dry, clean, dust- and grease-free and a good fit.
Preliminary surface treatment: Clean and degrease the surfaces to be bonded for optimal results.
Tools: Use a solid brush or fine-toothed (1 mm) glue spreader to cover large surfaces. Use a roller or rubber mallet to join the materials firmly.
Preparation of product: Stir well before use. Should preferably not be diluted
Coverage: 2 - 2.5 m²/litre, applied on both sides, depending on the nature of the materials to be bonded.

Directions For Use
Parts must be clean, dry and free of grease.
Coat both substrates completely.
Allow to dry for a minimum of 10 - 40 minutes.
In case of porous materials, apply a second coat and let dry.
Then join parts and roll or tap firmly (with a rubber mallet).

Points of attention
For optimum results, both the adhesive and the parts to be bonded must be at room temperature (definitely do not use below +10 °C).
The final bonding strength depends on the pressure applied.
Therefore, press as firmly as possible across the entire surface.
Should the adhesive joint between porous materials be exposed to long-lasting contact with water, the adhesive may detach from the wet surface.
Stains/residue: Remove fresh adhesive residue immediately with Acetone. Dried adhesive residue can only be removed mechanically or with a paint remover (test first).

Storage conditions: Store properly closed in a cool and frost-free place. Shelf life is a minimum 24 months.

A quick, easy to use sprayable adhesive which provides a clear repositionable or permanent bond to a wide variety of craft materials making it ideal for hobbies and school projects. The adhesive is acid free and will not stain or wrinkle surfaces. It has excellent initial grab and long tack life making it ideal for solving difficult assembly and positioning problems such as bonding to a vertical surface.

Pentel is an international stationery brand recognised by consumers globally and is renowned for its innovation and quality products.
Pentel boasts a wide range of ballpoint pens, mechanical pencils, correction products (fluid & tape), markers and art materials.

Pentel Glue Tape is compact yet holds an impressive amount of glue tape, making this cute pocket-sized glue tape perefct for on-the-go. The new adhesive formula contains carbon fibre making it adhere firmly to paper and allows for a cleaner cut. A removable cape protects the glue tip from accidently spilling while being transported in pocket, backpack or just laying in the drawer. Its sweet charming egg design allows it to fit comfortably in the hand.

Couture Creations Glue Spots are perfect for use in adhering paper, photos, plastic, metals and more!

Hot Melt Glue Guns work in conjunction with Glue Gun Cartridges. The cartridges are cylindrical sticks of solid glue that melt when pushed through the glue gun.

The glue is tacky when hot, and solidifies in a few seconds to one minute. Hot melt adhesives can also be applied by dipping or spraying, and are popular with hobbyists and crafters both for affixing and as an inexpensive alternative to resin casting.

Once heated, the glue squeezed out of the nozzle is initially hot enough to burn and even blister skin. 

In general, hot melts are applied by extruding, rolling or spraying, and the high melt viscosity makes them ideal for porous and permeable substrates. The melted glue will bond to an array of different substrates including: rubber, ceramics, metals, plastics, glass and wood. 

Hot Melt Glue Guns work in conjunction with Glue Gun Cartridges. The cartridges are cylindrical sticks of solid glue that melt when pushed through the glue gun.

The glue is tacky when hot, and solidifies in a few seconds to one minute. Hot melt adhesives can also be applied by dipping or spraying, and are popular with hobbyists and crafters both for affixing and as an inexpensive alternative to resin casting.

Once heated, the glue squeezed out of the nozzle is initially hot enough to burn and even blister skin. 

In general, hot melts are applied by extruding, rolling or spraying, and the high melt viscosity makes them ideal for porous and permeable substrates. The melted glue will bond to an array of different substrates including: rubber, ceramics, metals, plastics, glass and wood. 

Dala Washi Tapes are easy to use to jazz up basically anything, including DIY crafts, gift wrapping, scrapbook, planner, journal bullet, home decorations, and not just paper… how about personalising your water bottle or your favourite coffee mug?

The original, high quality PVA (polyvinyl acetate) glue and has been the best selling glue in SA for over 50 years. It sets quickly and is a universal glue that can be used for woodworking, furniture manufacture and other joinery work, or every day use, for bonding wood, leather, felt, cloth, board and paper. Excellent adhesion to medium woods, soft woods,processed board, leather, cloth, felt, paper, cardboard, cork and most other porous materials.

Couture Creations Glue Spots are perfect for use in adhering paper, photos, plastic, metals and more!

Couture Creations is the culmination of 20 years of experience in the scrapbooking industry. From its final inception in 2010, Couture Creations has been devoted to producing expertly designed, high quality products overseen by veteran designers & crafters for a result that is both simple and elegant.

Teddy Glitter Glue is a craft favourite. It's acid free and non toxic, available in these handy 5 x 10ml glue pen packs. Perfect for adding the finishing touch to most craft projects. Metallic Glitter Glue Pack: Silver, Gold and Rich Gold

Glue brushes with hog hair bristles and natural wooden handle. Ideal for general glue work

Glue brushes with hog hair bristles and natural wooden handle. Ideal for general glue work

Glue brushes with hog hair bristles and natural wooden handle. Ideal for general glue work

Dala Supersize Glitter Glue is filled with beautiful, rich glitter and an acid free adhesive making it perfect for paper and cardstock projects, scrapbooking applications, collage and craft embellishment.

Dala Construction Glue is a non-toxic liquid, white glue that dries to an opaque finish. It is a heavy duty craft glue and is ideal for school project use.

Glue brushes with hog hair bristles and natural wooden handle. Ideal for general glue work

Dala Stencil Glue is an acid free, off-white glue that offers a lot of flexibility in that it is a 'repositionable' adhesive.

This means you can temporarily but securely adhere stencils, signage etc while working, and then remove OR reposition the same stencil or sign to another location without reapplying the glue.

Dala Paper Glue is a non-toxic, clear, liquid glue that is suitable for all school and office paper and cardstock projects.
Can be further diluted with water for paper mache and similar projects.