1. 200W Air 3 3-channel charging manager, supports 2 100W inputs. In standard mode, the first battery is fully charged in 60 minutes, and the three batteries are fully charged in 80 minutes; in fast charging mode, the first battery is fully charged in 40 minutes, and the three batteries are fully charged in 60 minutes. (The above charging time is based on the Charging Manager with two LKTOP 100W desktop chargers, and the initial battery capacity is 0-10%. The charging test data is measured in a laboratory environment (room temperature 25 degrees Celsius) and is for reference only. .) 2. With built-in screen display function, you can view each battery’s information, voltage, capacity, temperature, number of cycles, power, etc. 3. Exquisite and compact design, the contact area between the battery and the charging compartment is small, and the battery is suspended on all sides for good heat dissipation, which delays the battery lifespan. 4. Three charging modes are available: the charging butler has three modes: 100% standard mode, 95% fast charging mode, and 60% storage mode to meet different needs. 5. Power bank output mode: When the USB-C input port is not connected to the power supply, insert the battery, long press the function button to turn on the phone, enter the power bank output mode, and connect a mobile phone or other digital device to the USB-C output port. 6. Power collection function: The charging butler has a power collection function that concentrates the remaining power in multiple low-power batteries into a battery with high remaining power, allowing you to use one more battery. 7. Power balancing function: The charging butler has a power balancing function. The power balancing function is to distribute the power in high-power batteries to other low-power batteries, so that all batteries have the same power, and energy is recycled without waste, which is convenient for long-term storage and aviation. Transportation etc. 8. Built-in multiple safety protections, including over-current, over-voltage, over-temperature and other protections Parameter: 1. Applicable battery model: suitable foe DJI Air 3 intelligent flight battery (BWX233-4241-14.76) 2. Working temperature: 5-40 degrees Celsius 3. USB-C1/C2 input: 9-20V--5V 100W Max 4. USB-C1+USB-C2 input: 200W Max 5. USB-C output: 5-15V-3A 45W Max 6. USB-C1/C2 protocol: C port input supports PD fast charging protocol, with power greater than 18W 7. Maximum charging power of each battery: 17V-5A 80W Max 8. Recommended power adapter: 100W/65W charger 9. Product size: approximately 164×61×52mm (product host) 10. Product weight: about 158g (excluding wire weight) Specification: General Compatible with DJI: RC 2 , RC N2 , Air 3 Package Weight One Package Weight 0.23kgs / 0.51lb One Package Size 18cm * 7cm * 6cm / 7.09inch * 2.76inch * 2.36inch Qty per Carton 64 Carton Weight 13.90kgs / 30.64lb Carton Size 38cm * 30cm * 50cm / 14.96inch * 11.81inch * 19.69inch Loading Container 20GP: 467 cartons * 64 pcs = 29888 pcs 40HQ: 1086 cartons * 64 pcs = 69504 pcs Best Sellers Rank #3476 in category: DJI & GoPro Accessories #222 in category: DJI & GoPro Accessories » DJI Air Series #72 in category: DJI & GoPro Accessories » DJI Air Series » Other OEM/ODM are Welcome! we can make Customize design and print your logo

1. This product is suitable for the DJI Air 3/Air 3S three-battery charging manager. It supports charging three batteries simultaneously, is compatible with PD 65W/100W fast charging, and can convert the batteries into a power bank to supply power to USB devices. It is specially designed for drone users who pursue efficient charging and battery maintenance. (Does not include batteries) 2. Efficient and fast charging: -- Charges one battery in 50 minutes (with PD 100W input) or 60 minutes (with PD 65W input). -- Fully charges three batteries in 150 minutes (PD 100W) or 180 minutes (PD 65W). 3. Dual charging modes, protecting battery life: --Full Charge Mode: Quickly charges batteries to 100% for immediate use. --Storage Mode: Automatically charges batteries below 60% to 60%-65% to extend lifespan during long-term storage. 4. Power bank function: Convert DJI Air 3 batteries into a power source to charge USB devices (e.g., smartphones, tablets) via Type-C port. Parameters: 1. Input voltage: 5V - 20V / 5A (Max) 2. Output: 17.0V / 5.0A (Max) 3. TYPE-C output: 5V / 9V / 12V / 15V -- 3A; 20V -- 3.25A 4. Product weight: 97 grams Packaging List: 1 x 3-Channel Charging Hub 1 x USB-A to USB-C charging cable 1 x USB-C to USB-C charging cable Specification: General Compatible with DJI: Air 3S , Air 3 Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 20cm * 10cm * 4cm / 7.87inch * 3.94inch * 1.57inch Qty per Carton 120 Carton Weight 19.10kgs / 42.11lb Carton Size 38cm * 34cm * 47cm / 14.96inch * 13.39inch * 18.5inch Loading Container 20GP: 439 cartons * 120 pcs = 52680 pcs 40HQ: 1019 cartons * 120 pcs = 122280 pcs OEM/ODM are Welcome! we can make Customize design and print your logo

1. This product is suitable for the DJI Air 3/Air 3S battery charger. With an input of 100W, it can charge 2 batteries simultaneously in just 78 minutes (excluding the batteries). It is recommended to use a PD 100W or 65W charger to charge the battery. 2. Functions of the charger - Full charge mode, Storage charge mode, Discharge mode, Using the AIR 3 battery as a power bank, and checking battery level 3. USB output introduction: (After connection, press "Button 1" to wake up the charger; otherwise, there will be no USB output) -- Using the AIR 3 battery as a power bank: Use the AIR 3 battery to charge other devices (such as mobile phones, remote controls). -- Discharge mode: Connect the dedicated discharger and can discharge the AIR 3 battery. In discharge mode, there is no need to connect the power adapter. All batteries will automatically stop discharging when the battery level reaches the set cutoff level (the cutoff level can be freely set between 5% and 80%) 4. Check battery level: Press "Button 1" to wake up the charger and quickly view important information about the battery 5. Full charge mode: Charge the battery fully. 6. Storage charge mode: The optimal battery level for long-term storage is around 60%. This mode can charge batteries with a level lower than 60% to 60%-65% and then automatically stop. (Only applicable to batteries with a level below 60%) Parameters: 1. Input voltage: 5V/9V/12V/15V - 3A; 20V/5A 2. DC output: 17.0V - 3.0A x 2 3. Single output: 17.0V - 5.0A (max) 4. USB output: 5V/3A (max) 5. Operating temperature range: 0 - 40 degrees Celsius 6. Product dimensions: 11.3 x 5.2 x 11.3 cm (charger); 5 x 6 x 3.5 cm (discharger) Packaging List: 1 x Color screen dual charger 1 x Charger 1 x USB-A to USB-C charging cable 1 x USB-C to USB-C charging cable Specification: General Compatible with DJI: Air 3S , Air 3 Package Weight One Package Weight 0.34kgs / 0.75lb One Package Size 18cm * 15cm * 8cm / 7.09inch * 5.91inch * 3.15inch Qty per Carton 30 Carton Weight 11.30kgs / 24.91lb Carton Size 36cm * 47cm * 32cm / 14.17inch * 18.5inch * 12.6inch Loading Container 20GP: 492 cartons * 30 pcs = 14760 pcs 40HQ: 1143 cartons * 30 pcs = 34290 pcs OEM/ODM are Welcome! we can make Customize design and print your logo

1. Exclusive design: A two-way charging butler designed for DJI Air3 original batteries, designed to fit the size of Air3 batteries, with two battery slots, which can charge two batteries at a time; 2. High-quality materials: Made of ABS+PC materials, the surface is smooth and burr-free, sturdy and durable; it can be charged in the upright position, controlled by an intelligent chip, and has stable input and output without damaging the battery; 3. Fast charging: The charging butler can meet the requirements of fast charging of batteries, stable charging, supporting conventional non-proprietary protocol PD fast charging, and also supports overcharge protection, overheating protection, short circuit protection, and overvoltage protection; 4. Two modes: The charging butler is designed with storage and charging modes, and the two modes can be switched to effectively protect the battery, have a certain degree of safety, and extend the battery life; 5. Worry-free use: The overall size is small, easy to store, suitable for outdoor carrying, and 2 USB ports are reserved, which can be used to charge the remote control or mobile phone to meet the needs of outdoor shooting; Specification: General Compatible with DJI: Air 3S , Air 3 Package Weight One Package Weight 0.27kgs / 0.60lb One Package Size 16cm * 14cm * 7cm / 6.3inch * 5.51inch * 2.76inch Qty per Carton 30 Carton Weight 9.50kgs / 20.94lb Carton Size 50cm * 30cm * 37cm / 19.69inch * 11.81inch * 14.57inch Loading Container 20GP: 480 cartons * 30 pcs = 14400 pcs 40HQ: 1115 cartons * 30 pcs = 33450 pcs Best Sellers Rank #1714 in category: DJI & GoPro Accessories #103 in category: DJI & GoPro Accessories » DJI Air Series #39 in category: DJI & GoPro Accessories » DJI Air Series » Other

1. This car charger can charge two Air 3S or Air 3 batteries at the same time, and it takes about 75 minutes to fully charge two batteries (the product does not include batteries, remote control, and USB cable) 2. Intelligent chip control, built-in fuse, stable charging without damaging the battery 3. LED digital display screen, which can display the charging status of two batteries at the same time 4. Pluggable DC cable, more convenient to use Parameters: 1. Charging environment temperature: 7-40 degrees 2. Input: DC 12-16V 7A 3. Output 1: MAX DC 17V 2.5A x 2 4. Output 2: USB-A DC 5V 2A 5. Charging time: Charging time is about 75 minutes 6. Product net weight: 177 grams Specification: General Compatible with DJI: Air 3S , Air 3 Package Weight One Package Weight 0.23kgs / 0.52lb One Package Size 20cm * 6cm * 13cm / 7.87inch * 2.36inch * 5.12inch Qty per Carton 60 Carton Weight 14.90kgs / 32.85lb Carton Size 38cm * 42cm * 35cm / 14.96inch * 16.54inch * 13.78inch Loading Container 20GP: 477 cartons * 60 pcs = 28620 pcs 40HQ: 1108 cartons * 60 pcs = 66480 pcs Best Sellers Rank #1449 in category: DJI & GoPro Accessories #92 in category: DJI & GoPro Accessories » DJI Air Series #36 in category: DJI & GoPro Accessories » DJI Air Series » Other OEM/ODM are Welcome! we can make Customize design and print your logo

1. Suitable for DJI Air 3S /Air 3 2-way charger, which can support up to PD 100W, and it only takes 50 minutes to fully charge a battery (the product only has a charger, not a battery) 2. Two modes: Charging mode quickly charges the battery; Storage mode charges the battery with a battery level below 60% to about 60% for long-term storage, reducing battery attenuation and swelling caused by the drone battery being empty or fully charged 3. Charging time: about 60 minutes for each battery at 65W input; about 120 minutes for 2 batteries; about 50 minutes for each battery at 100W input, and about 100 minutes for 2 batteries. (PD 65W or 100W charger is recommended) 4. Intelligent chip control, stable input without damaging the battery 5. The battery can be discharged and used as a power bank to charge USB external device remote control or mobile phone Parameters: 1. Input voltage: 5V-20V/5A (Max) 2. Output: 17.0V/5.0A (Max) 3. TYPE-C output: 5V/9V/12V/15V--3A; 20V--3.25A 4. Product weight: 186g 5. Product size: 5 x 11.2 x 11.4cm Packing list: 1 x Dual-channel butler 1 x USB-A to USB-C charging cable 1 x USB-C to USB-C charging cable Specification: General Compatible with DJI: Air 3S , Air 3 Package Weight One Package Weight 0.22kgs / 0.47lb One Package Size 14cm * 14cm * 8cm / 5.51inch * 5.51inch * 3.15inch Qty per Carton 6 Carton Weight 13.80kgs / 30.42lb Carton Size 38cm * 50cm * 32cm / 14.96inch * 19.69inch * 12.6inch Loading Container 20GP: 438 cartons * 6 pcs = 2628 pcs 40HQ: 1018 cartons * 6 pcs = 6108 pcs Best Sellers Rank #1448 in category: DJI & GoPro Accessories #91 in category: DJI & GoPro Accessories » DJI Air Series #35 in category: DJI & GoPro Accessories » DJI Air Series » Other OEM/ODM are Welcome! we can make Customize design and print your logo

1. Specifically designed for DJI Flip batteries, equipped with a color screen and three-channel charging function. Supports PD 65W+ input, can charge three batteries simultaneously, and is fully charged in approximately 73 minutes (product does not include batteries). 2. Intelligent power matching and safety guarantee: Automatically switches charging mode based on input power (simultaneously or sequentially charging), and has built-in overcurrent, overheat, and short circuit protection mechanisms to ensure safety and efficiency. 3. Dual-function design: Charger + portable power bank, converts FLIP batteries into portable power banks, and charges external devices such as mobile phones and remote controllers through a 5V/2A USB-A interface. 4. Dual charging modes to extend battery life: -- Full charge mode: Quickly charges the battery; -- Storage mode: Charges batteries with less than 60% battery to 60%-65%, suitable for long-term storage (batteries above 60% do not charge). 5. Real-time power display: Without installing the battery in the drone, simply insert the charger and view the battery level through the color screen (automatically displayed in 15 seconds), always keeping track of the battery status. Parameters: 1. Charging temperature: 0 - 40 degrees 2. Input voltage: 5V/9V/12V/15V/20V -- 3A 3. DC output: 8.6V/8A (Maximum) 4. USB output: 5V/2.0A (Maximum) 5. Net product weight: 127g (excluding wire weight) 6. Product size: 14.7 x 6.4 x 3.2 cm Product list: Color screen three-output charger x1 USB-A to USB-C charging cable x1 USB-C to USB-C charging cable x1 Specification: General Compatible with DJI: Flip Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 18cm * 10cm * 5cm / 7.09inch * 3.94inch * 1.97inch Qty per Carton 80 Carton Weight 15.50kgs / 34.17lb Carton Size 34cm * 38cm * 42cm / 13.39inch * 14.96inch * 16.54inch Loading Container 20GP: 491 cartons * 80 pcs = 39280 pcs 40HQ: 1140 cartons * 80 pcs = 91200 pcs OEM/ODM are Welcome! we can make Customize design and print your logo

1. Applicable batteries: Matrice 4 series batteries 2. Operating temperature: 5 - 40 degree Celsius 3. Input: 100V-240V 2.5A 50Hz/60Hz 230W 4. Output: 5V 3A, 9V 3A, 12V 3A, 15V 2.4A, 20V 1.8A 36W Max 5. Charging power: 180W Max(single battery)/200W Max(multiple batteries) 6. Display size: 1.5-inch IPS wide viewing angle screen 7. Packing list: charger x 1, adapter x 1, Matrice 4 series battery charging cable x 3, dual Type-C port cable x 1, manual x 1 8. Weight: about 380g 9. Size: about 13.8 x 6.4 x 5.2cm 10. Note: only charger, no others included Features: 1. 200W high power output, can be connected to 3 batteries and fast charging at the same time 2. 100% full charge/100% silent/60% storage 3 charging modes, to meet the charging needs of different scenarios 3. Type-C port can also charge drone remote control, sports camera, cell phone and other electronic devices 4. Under full charge mode (charging to 100%), it takes about 56 minutes to fully charge the first battery, 95 minutes for the second battery, and 110 minutes for the third battery 5. Built-in high-efficiency silent fan, subtle airflow design, active cooling, fast charging, heat dissipation 6. 1.5-inch IPS wide viewing angle screen, charging parameters, mode selection, battery information, OTA progress, detailed parameters at a glance 7. 3 battery output ports + 1 Type-C output port, battery output port can be adapted to different models of batteries (different battery charging cables need to be provided) 8. With six-fold protection of over-temperature / over-voltage / over-current / short-circuit / under-voltage / over-power Specification: General Compatible with DJI: Matrice 4T , Matrice 4E Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 17cm * 15cm * 8cm / 6.69inch * 5.91inch * 3.15inch Qty per Carton 36 Carton Weight 19.00kgs / 41.89lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 36 pcs = 15768 pcs 40HQ: 1018 cartons * 36 pcs = 36648 pcs OEM/ODM are Welcome! we can make Customize design and print your logo

1. Applicable batteries: Matrice 4 series batteries 2. Operating temperature: 5 - 40 degree Celsius 3. Input: 100V-240V 2.5A 50Hz/60Hz 230W 4. Output: 5V 3A, 9V 3A, 12V 3A, 15V 2.4A, 20V 1.8A 36W Max 5. Charging power: 180W Max(single battery)/200W Max(multiple batteries) 6. Display size: 1.5-inch IPS wide viewing angle screen 7. Packing list: charger x 1, adapter x 1, Matrice 4 series battery charging cable x 3, dual Type-C port cable x 1, manual x 1 8. Weight: about 380g 9. Size: about 13.8 x 6.4 x 5.2cm 10. Note: only charger, no others included Features: 1. 200W high power output, can be connected to 3 batteries and fast charging at the same time 2. 100% full charge/100% silent/60% storage 3 charging modes, to meet the charging needs of different scenarios 3. Type-C port can also charge drone remote control, sports camera, cell phone and other electronic devices 4. Under full charge mode (charging to 100%), it takes about 56 minutes to fully charge the first battery, 95 minutes for the second battery, and 110 minutes for the third battery 5. Built-in high-efficiency silent fan, subtle airflow design, active cooling, fast charging, heat dissipation 6. 1.5-inch IPS wide viewing angle screen, charging parameters, mode selection, battery information, OTA progress, detailed parameters at a glance 7. 3 battery output ports + 1 Type-C output port, battery output port can be adapted to different models of batteries (different battery charging cables need to be provided) 8. With six-fold protection of over-temperature / over-voltage / over-current / short-circuit / under-voltage / over-power Specification: General Compatible with DJI: Matrice 4T , Matrice 4E Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 17cm * 15cm * 8cm / 6.69inch * 5.91inch * 3.15inch Qty per Carton 36 Carton Weight 19.00kgs / 41.89lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 36 pcs = 15768 pcs 40HQ: 1018 cartons * 36 pcs = 36648 pcs OEM/ODM are Welcome! we can make Customize design and print your logo

1. Suitable for the DJI Mavic 3 battery charger, supporting simultaneous charging of 3 batteries, and featuring discharge and storage modes. 2. Dual input mode: The input supports AC 100- 240V and DC 11- 14V. 3. Three working modes: 1) Charging mode: Can charge 1-3 batteries and one USB device simultaneously. Charging 2 batteries simultaneously takes approximately 100 minutes, and charging 3 batteries simultaneously takes approximately 150 minutes. 2) Storage charging mode: Automatically stops working when the battery reaches 60-65% through charging or discharging. In this mode, batteries with higher charge levels discharge while those with lower charge levels charge. 3) Discharge mode: Connect a discharger to discharge the battery to 5-80%. The default discharge cut-off level is 15%, and the discharge cut-off level can be set within the discharge range. 4. Controlled by an intelligent chip for stable charging without damaging the battery. 5. No need to place the battery on the drone. Check the battery level anytime, anywhere. When the battery is inserted into the charger, the battery level will be displayed for 5 seconds. Product Parameters: 1. Input: 11-14V/10A (Max) 2. Output: 17.6V/2.0A x 3 or 17.6V/3.0A x 2 3. USB Output: 5V/3A 4. Total Output Power: 120W (Max) 5. Discharge Power: 18W (Max) 6. Charging Environment Temperature: 0-40 degrees Celsius 7. Product Dimensions: 15.3 x 4.1 x 7cm (Power Supply) 18 x 5.5 x 3cm (Charger) 5 x 6 x 3.5cm (Discharger) Note: The product does not contain batteries Specification: General Compatible with DJI: Mavic 3 Pro , Mavic 3 Package Weight One Package Weight 0.86kgs / 1.90lb One Package Size 27cm * 22cm * 8cm / 10.63inch * 8.66inch * 3.15inch Qty per Carton 10 Carton Weight 9.70kgs / 21.38lb Carton Size 27cm * 42cm * 37cm / 10.63inch * 16.54inch * 14.57inch Loading Container 20GP: 635 cartons * 10 pcs = 6350 pcs 40HQ: 1475 cartons * 10 pcs = 14750 pcs Best Sellers Rank #1591 in category: DJI & GoPro Accessories #185 in category: DJI & GoPro Accessories » DJI Mavic Series #9 in category: DJI & GoPro Accessories » DJI Mavic Series » Charger OEM/ODM are Welcome! we can make Customize design and print your logo

1. Suitable for the DJI Mavic 3 battery charger, supporting simultaneous charging of 3 batteries, and featuring discharge and storage modes. 2. Dual input mode: The input supports AC 100- 240V and DC 11- 14V. 3. Three working modes: 1) Charging mode: Can charge 1-3 batteries and one USB device simultaneously. Charging 2 batteries simultaneously takes approximately 100 minutes, and charging 3 batteries simultaneously takes approximately 150 minutes. 2) Storage charging mode: Automatically stops working when the battery reaches 60-65% through charging or discharging. In this mode, batteries with higher charge levels discharge while those with lower charge levels charge. 3) Discharge mode: Connect a discharger to discharge the battery to 5-80%. The default discharge cut-off level is 15%, and the discharge cut-off level can be set within the discharge range. 4. Controlled by an intelligent chip for stable charging without damaging the battery. 5. No need to place the battery on the drone. Check the battery level anytime, anywhere. When the battery is inserted into the charger, the battery level will be displayed for 5 seconds. Product Parameters: 1. Input: 11-14V/10A (Max) 2. Output: 17.6V/2.0A x 3 or 17.6V/3.0A x 2 3. USB Output: 5V/3A 4. Total Output Power: 120W (Max) 5. Discharge Power: 18W (Max) 6. Charging Environment Temperature: 0-40 degrees Celsius 7. Product Dimensions: 15.3 x 4.1 x 7cm (Power Supply) 18 x 5.5 x 3cm (Charger) 5 x 6 x 3.5cm (Discharger) Note: The product does not contain batteries Specification: General Compatible with DJI: Mavic 3 Pro , Mavic 3 Package Weight One Package Weight 0.81kgs / 1.79lb One Package Size 27cm * 22cm * 8cm / 10.63inch * 8.66inch * 3.15inch Qty per Carton 10 Carton Weight 9.20kgs / 20.28lb Carton Size 27cm * 42cm * 37cm / 10.63inch * 16.54inch * 14.57inch Loading Container 20GP: 635 cartons * 10 pcs = 6350 pcs 40HQ: 1475 cartons * 10 pcs = 14750 pcs Best Sellers Rank #1591 in category: DJI & GoPro Accessories #185 in category: DJI & GoPro Accessories » DJI Mavic Series #9 in category: DJI & GoPro Accessories » DJI Mavic Series » Charger OEM/ODM are Welcome! we can make Customize design and print your logo

1. Suitable for the DJI Mavic 3 battery charger, supporting simultaneous charging of 3 batteries, and featuring discharge and storage modes. 2. Dual input mode: The input supports AC 100- 240V and DC 11- 14V. 3. Three working modes: 1) Charging mode: Can charge 1-3 batteries and one USB device simultaneously. Charging 2 batteries simultaneously takes approximately 100 minutes, and charging 3 batteries simultaneously takes approximately 150 minutes. 2) Storage charging mode: Automatically stops working when the battery reaches 60-65% through charging or discharging. In this mode, batteries with higher charge levels discharge while those with lower charge levels charge. 3) Discharge mode: Connect a discharger to discharge the battery to 5-80%. The default discharge cut-off level is 15%, and the discharge cut-off level can be set within the discharge range. 4. Controlled by an intelligent chip for stable charging without damaging the battery. 5. No need to place the battery on the drone. Check the battery level anytime, anywhere. When the battery is inserted into the charger, the battery level will be displayed for 5 seconds. Product Parameters: 1. Input: 11-14V/10A (Max) 2. Output: 17.6V/2.0A x 3 or 17.6V/3.0A x 2 3. USB Output: 5V/3A 4. Total Output Power: 120W (Max) 5. Discharge Power: 18W (Max) 6. Charging Environment Temperature: 0-40 degrees Celsius 7. Product Dimensions: 15.3 x 4.1 x 7cm (Power Supply) 18 x 5.5 x 3cm (Charger) 5 x 6 x 3.5cm (Discharger) Note: The product does not contain batteries Specification: General Compatible with DJI: Mavic 3 Pro , Mavic 3 Package Weight One Package Weight 0.86kgs / 1.90lb One Package Size 27cm * 22cm * 8cm / 10.63inch * 8.66inch * 3.15inch Qty per Carton 10 Carton Weight 9.70kgs / 21.38lb Carton Size 27cm * 42cm * 37cm / 10.63inch * 16.54inch * 14.57inch Loading Container 20GP: 635 cartons * 10 pcs = 6350 pcs 40HQ: 1475 cartons * 10 pcs = 14750 pcs Best Sellers Rank #1591 in category: DJI & GoPro Accessories #185 in category: DJI & GoPro Accessories » DJI Mavic Series #9 in category: DJI & GoPro Accessories » DJI Mavic Series » Charger OEM/ODM are Welcome! we can make Customize design and print your logo

1. Suitable for the DJI Mavic 3 battery charger, supporting simultaneous charging of 3 batteries, and featuring discharge and storage modes. 2. Dual input mode: The input supports AC 100- 240V and DC 11- 14V. 3. Three working modes: 1) Charging mode: Can charge 1-3 batteries and one USB device simultaneously. Charging 2 batteries simultaneously takes approximately 100 minutes, and charging 3 batteries simultaneously takes approximately 150 minutes. 2) Storage charging mode: Automatically stops working when the battery reaches 60-65% through charging or discharging. In this mode, batteries with higher charge levels discharge while those with lower charge levels charge. 3) Discharge mode: Connect a discharger to discharge the battery to 5-80%. The default discharge cut-off level is 15%, and the discharge cut-off level can be set within the discharge range. 4. Controlled by an intelligent chip for stable charging without damaging the battery. 5. No need to place the battery on the drone. Check the battery level anytime, anywhere. When the battery is inserted into the charger, the battery level will be displayed for 5 seconds. Product Parameters: 1. Input: 11-14V/10A (Max) 2. Output: 17.6V/2.0A x 3 or 17.6V/3.0A x 2 3. USB Output: 5V/3A 4. Total Output Power: 120W (Max) 5. Discharge Power: 18W (Max) 6. Charging Environment Temperature: 0-40 degrees Celsius 7. Product Dimensions: 15.3 x 4.1 x 7cm (Power Supply) 18 x 5.5 x 3cm (Charger) 5 x 6 x 3.5cm (Discharger) Note: The product does not contain batteries Specification: General Compatible with DJI: Mavic 3 Pro , Mavic 3 Package Weight One Package Weight 0.81kgs / 1.79lb One Package Size 27cm * 22cm * 8cm / 10.63inch * 8.66inch * 3.15inch Qty per Carton 10 Carton Weight 9.20kgs / 20.28lb Carton Size 27cm * 42cm * 37cm / 10.63inch * 16.54inch * 14.57inch Loading Container 20GP: 635 cartons * 10 pcs = 6350 pcs 40HQ: 1475 cartons * 10 pcs = 14750 pcs Best Sellers Rank #1591 in category: DJI & GoPro Accessories #185 in category: DJI & GoPro Accessories » DJI Mavic Series #9 in category: DJI & GoPro Accessories » DJI Mavic Series » Charger OEM/ODM are Welcome! we can make Customize design and print your logo

1. Designed specifically for DJI Mavic 3 Pro/Mavic 3 drone batteries, this single-channel USB charger supports USB fast charging. When used with the DJI original 65W portable charger (separately purchased), it takes approximately 90 minutes to fully charge a single battery. 2. When paired with the original DJI 65W charger, it delivers a maximum output of 65W (17.6V/4A). Charging time for a single battery is approximately 90 minutes (actual charging time may vary depending on the power source). 3. Multi-device Compatibility: Can be connected to various power sources including chargers, power banks, car chargers, and laptops. 4. Battery Protection Design: The rounded charging pins match the thickness of the original factory pins, preventing scratches on the battery contacts and ensuring stable connection. 5. Smart Indicator Light: Red light during no-load condition and charging; Green light when fully charged. 6. Note: This product does not include the battery, USB cable, or the DJI original 65W portable charger. Parameters: 1. Input Voltage: 5V/9V/12V/15V-3A; 20V-5A 2. Output Voltage: 17.6V/4A (65W max) 3. Product Weight: 56g 4. Product Dimensions: 5.5 x 5.9 x 3.3cm Specification: General Compatible with DJI: Mavic 3 Pro , Mavic 3 Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 9cm * 7cm * 9cm / 3.54inch * 2.76inch * 3.54inch Qty per Carton 160 Carton Weight 12.30kgs / 27.12lb Carton Size 30cm * 42cm * 37cm / 11.81inch * 16.54inch * 14.57inch Loading Container 20GP: 572 cartons * 160 pcs = 91520 pcs 40HQ: 1327 cartons * 160 pcs = 212320 pcs OEM/ODM are Welcome! we can make Customize design and print your logo

1. 200W fast charging, high power, safer, can charge multiple devices at the same time 2. 100W two-way charge and discharge, can be used as a power bank after installing the battery 3. Six protections: overcurrent protection/overvoltage protection/short circuit protection/overtemperature protection/undervoltage protection/overpower protection 4. The three batteries are charged at the same time, and the first battery is fully charged in about 60-70 minutes, so that you can always use the battery without worrying about running out of power 5. Press and hold the function button for more than 2 seconds to enter the one-button storage mode, and the three batteries will be charged to about 60%, which is convenient for travel, air transportation, and storage when not in use for a long time. 6. While charging a single battery with 100W, the Type-C port supports PD output up to 100W output charging Parameter: 1. Applicable battery model: suitable for DJI Mavic 3 series battery (BWX-260-5000-15.4) 2. Material: PC fireproof material 3. Working temperature: 0-40 degrees Celsius 4. AC input voltage: 100V-240V~2.5A 50Hz/60Hz 230W 5. USB Type-C input: 9V~3A; 12V~3A; 15V~3A; 20V~5A 6. USB Type-C output: 5V-2A; 9V-3A; 12V-3A; 15V-3A; 20V-5A PPS: 3.3V-21V=5A 7. Charging power: 100W Max (single battery)/200W Max (multiple batteries) 8. Product size: 151 x 75 x 60mm 9. Product weight: 475g +/-10% (excluding wire weight) 10. Charging time: -The first battery is about 60-70 minutes -About 70-80 minutes with two batteries -Three batteries about 80-90 minutes packing list: Charger x 1 0.5m dual Type-C cable x 1 1m AC power cord x 1 manual x 1 storage bag x 1 Specification: General Compatible with DJI: Mavic 3 Pro , Mavic 3 Classic , Mavic 3 Package Weight One Package Weight 0.64kgs / 1.42lb One Package Size 18cm * 12cm * 10cm / 7.09inch * 4.72inch * 3.94inch Qty per Carton 60 Carton Weight 39.18kgs / 86.38lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 60 pcs = 10620 pcs 40HQ: 412 cartons * 60 pcs = 24720 pcs Best Sellers Rank #940 in category: DJI & GoPro Accessories #71 in category: DJI & GoPro Accessories » DJI Mavic Series #3 in category: DJI & GoPro Accessories » DJI Mavic Series » Charger OEM/ODM are Welcome! we can make Customize design and print your logo

1. 200W fast charging, high power, safer, can charge multiple devices at the same time 2. 100W two-way charge and discharge, can be used as a power bank after installing the battery 3. Six protections: overcurrent protection/overvoltage protection/short circuit protection/overtemperature protection/undervoltage protection/overpower protection 4. The three batteries are charged at the same time, and the first battery is fully charged in about 60-70 minutes, so that you can always use the battery without worrying about running out of power 5. Press and hold the function button for more than 2 seconds to enter the one-button storage mode, and the three batteries will be charged to about 60%, which is convenient for travel, air transportation, and storage when not in use for a long time. 6. While charging a single battery with 100W, the Type-C port supports PD output up to 100W output charging Parameter: 1. Applicable battery model: suitable for DJI Mavic 3 series battery (BWX-260-5000-15.4) 2. Material: PC fireproof material 3. Working temperature: 0-40 degrees Celsius 4. AC input voltage: 100V-240V~2.5A 50Hz/60Hz 230W 5. USB Type-C input: 9V~3A; 12V~3A; 15V~3A; 20V~5A 6. USB Type-C output: 5V-2A; 9V-3A; 12V-3A; 15V-3A; 20V-5A PPS: 3.3V-21V=5A 7. Charging power: 100W Max (single battery)/200W Max (multiple batteries) 8. Product size: 151 x 75 x 60mm 9. Product weight: 475g +/-10% (excluding wire weight) 10. Charging time: -The first battery is about 60-70 minutes -About 70-80 minutes with two batteries -Three batteries about 80-90 minutes packing list: Charger x 1 0.5m dual Type-C cable x 1 1m AC power cord x 1 manual x 1 storage bag x 1 Specification: General Compatible with DJI: Mavic 3 Pro , Mavic 3 Classic , Mavic 3 Package Weight One Package Weight 0.65kgs / 1.44lb One Package Size 18cm * 12cm * 10cm / 7.09inch * 4.72inch * 3.94inch Qty per Carton 60 Carton Weight 39.18kgs / 86.38lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 60 pcs = 10620 pcs 40HQ: 412 cartons * 60 pcs = 24720 pcs Best Sellers Rank #940 in category: DJI & GoPro Accessories #71 in category: DJI & GoPro Accessories » DJI Mavic Series #3 in category: DJI & GoPro Accessories » DJI Mavic Series » Charger OEM/ODM are Welcome! we can make Customize design and print your logo

1. Output: DC 17.6V/12A (each 17.6V/4A) 2. Input: 100-240V 50/60Hz 3. USB output: DC5V/3A (branch 1.5A) 4. With safety switch, energy saving and environmental protection 5. With a cooling fan, intelligently start according to the charging temperature, effectively control the temperature of the charger 6. 4A current, more stable charging 7. It takes about 90 minutes to fully charge 3 batteries 8. Covered plug, can prevent short circuit and dust 9. Smart chip and control, stable charging without damaging the battery 10. Product size: 15.9x10.9x3.6 cm 11. Product net weight: US standard 794 grams, European standard 809 grams, Australian standard 810 grams, British standard 864 grams Specification: General Compatible with DJI: Mavic 3 Package Weight One Package Weight 1.00kgs / 2.20lb One Package Size 20cm * 20cm * 6cm / 7.87inch * 7.87inch * 2.36inch Qty per Carton 32 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 32 pcs = 5664 pcs 40HQ: 412 cartons * 32 pcs = 13184 pcs Best Sellers Rank #3284 in category: DJI & GoPro Accessories #295 in category: DJI & GoPro Accessories » DJI Mavic Series #8 in category: DJI & GoPro Accessories » DJI Mavic Series » Charger OEM/ODM are Welcome! we can make Customize design and print your logo

1. Output: DC 17.6V/12A (each 17.6V/4A) 2. Input: 100-240V 50/60Hz 3. USB output: DC5V/3A (branch 1.5A) 4. With safety switch, energy saving and environmental protection 5. With a cooling fan, intelligently start according to the charging temperature, effectively control the temperature of the charger 6. 4A current, more stable charging 7. It takes about 90 minutes to fully charge 3 batteries 8. Covered plug, can prevent short circuit and dust 9. Smart chip and control, stable charging without damaging the battery 10. Product size: 15.9x10.9x3.6 cm 11. Product net weight: US standard 794 grams, European standard 809 grams, Australian standard 810 grams, British standard 864 grams Specification: General Compatible with DJI: Mavic 3 Package Weight One Package Weight 0.92kgs / 2.04lb One Package Size 20cm * 20cm * 6cm / 7.87inch * 7.87inch * 2.36inch Qty per Carton 32 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 32 pcs = 5664 pcs 40HQ: 412 cartons * 32 pcs = 13184 pcs Best Sellers Rank #3284 in category: DJI & GoPro Accessories #295 in category: DJI & GoPro Accessories » DJI Mavic Series #8 in category: DJI & GoPro Accessories » DJI Mavic Series » Charger OEM/ODM are Welcome! we can make Customize design and print your logo

1. Output: DC 17.6V/12A (each 17.6V/4A) 2. Input: 100-240V 50/60Hz 3. USB output: DC5V/3A (branch 1.5A) 4. With safety switch, energy saving and environmental protection 5. With a cooling fan, intelligently start according to the charging temperature, effectively control the temperature of the charger 6. 4A current, more stable charging 7. It takes about 90 minutes to fully charge 3 batteries 8. Covered plug, can prevent short circuit and dust 9. Smart chip and control, stable charging without damaging the battery 10. Product size: 15.9x10.9x3.6 cm 11. Product net weight: US standard 794 grams, European standard 809 grams, Australian standard 810 grams, British standard 864 grams Specification: General Compatible with DJI: Mavic 3 Package Weight One Package Weight 1.04kgs / 2.29lb One Package Size 20cm * 20cm * 6cm / 7.87inch * 7.87inch * 2.36inch Qty per Carton 30 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 30 pcs = 5310 pcs 40HQ: 412 cartons * 30 pcs = 12360 pcs Best Sellers Rank #3284 in category: DJI & GoPro Accessories #295 in category: DJI & GoPro Accessories » DJI Mavic Series #8 in category: DJI & GoPro Accessories » DJI Mavic Series » Charger OEM/ODM are Welcome! we can make Customize design and print your logo

1. Output: DC 17.6V/12A (each 17.6V/4A) 2. Input: 100-240V 50/60Hz 3. USB output: DC5V/3A (branch 1.5A) 4. With safety switch, energy saving and environmental protection 5. With a cooling fan, intelligently start according to the charging temperature, effectively control the temperature of the charger 6. 4A current, more stable charging 7. It takes about 90 minutes to fully charge 3 batteries 8. Covered plug, can prevent short circuit and dust 9. Smart chip and control, stable charging without damaging the battery 10. Product size: 15.9x10.9x3.6 cm 11. Product net weight: US standard 794 grams, European standard 809 grams, Australian standard 810 grams, British standard 864 grams Specification: General Compatible with DJI: Mavic 3 Package Weight One Package Weight 0.91kgs / 2.01lb One Package Size 20cm * 20cm * 6cm / 7.87inch * 7.87inch * 2.36inch Qty per Carton 32 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 32 pcs = 5664 pcs 40HQ: 412 cartons * 32 pcs = 13184 pcs Best Sellers Rank #3284 in category: DJI & GoPro Accessories #295 in category: DJI & GoPro Accessories » DJI Mavic Series #8 in category: DJI & GoPro Accessories » DJI Mavic Series » Charger OEM/ODM are Welcome! we can make Customize design and print your logo

1. Input: 5V/9V/12V/15V 3A, 20V 5A 2. Output: 17.6V/5.5A(100W max) 3. Charging time: about 65-85min (original 65/100W charger is recommended) 4. Interface: Type-C 5. Net weight: about 135g 6. Size: about 18 x 5.5 x 3cm Features: 1. LCD screen to check battery level 2. Up to 3 batteries can be put in, charging in order of power from high to low, the battery with high power is charged first (not at the same time) 3. Two modes: charging mode (to fully charge the battery), storage mode (to charge the battery below 60% to 60% for long-term storage) 4. Storage Mode: Long press the button for 2 seconds in charging mode to switch to storage mode, the best power for long term storage of drone electric is 60%, storage mode can charge the battery with power lower than 60% to 60% and then stop automatically. Done is displayed after the end of storage (only batteries with less than 60% power can be stored and charged, and the storage function can not be used when the power is greater than 60%) 5. Supports PD fast charging with overcharge/overheat/short-circuit/over-voltage protection Specification: General Compatible with DJI: Mavic 3 Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 20cm * 8cm * 6cm / 7.87inch * 3.15inch * 2.36inch Qty per Carton 100 Carton Weight 17.00kgs / 37.48lb Carton Size 45cm * 38cm * 34cm / 17.72inch * 14.96inch * 13.39inch Loading Container 20GP: 458 cartons * 100 pcs = 45800 pcs 40HQ: 1064 cartons * 100 pcs = 106400 pcs OEM/ODM are Welcome! we can make Customize design and print your logo

1. PD+QC3.0 fast charging port, supports simultaneous charging of UAV and remote control, bi-directional output design, charging fast enough, can get rid of low battery anxiety 2. Pure copper contacts, anti-scratch and anti-oxidation, better electrical conductivity, pure copper contact shrapnel, safe and worry-free 3. Universal interface, intelligent identification switching, compatible with a variety of mainstream flash charging protocols in the market, universal for Apple and Android phones, suitable for mainstream 12V 24V mainstream models in the market 4. Material: ABS+ aluminum alloy 5. Input voltage: DC 12V-24V 6. Output voltage: DC 5V 7. Compatible products: for DJI MAVIC 3/MINI 2 8. PD output: 5V 5A/9V 5A/12V 5A/15V 5A/20V 5A 9. USB output: 5V 3A/9V 2A/12V 1.5A 10. Working temperature: 0-55 degrees Celsius 11. Mavic 3 charging time: about 95 minutes when the car charger works at 24V 2.5A; about 95 minutes when it works at 12V 5A 12. Mini 2 charging time: about 90 minutes when the car charger is working at 24V 1.2A 13. Packing list: charger x1, data cable x1 (excluding drone and remote control) 14. Dimensions: about 7 x 4.2 x 2.8cm 15. Weight: about 43g Specification: General Compatible with DJI: Mavic 3 , Mini 2 Package Weight One Package Weight 0.14kgs / 0.30lb One Package Size 13cm * 10cm * 6cm / 5.12inch * 3.94inch * 2.36inch Qty per Carton 194 Carton Weight 30.00kgs / 66.14lb Carton Size 50cm * 50cm * 60cm / 19.69inch * 19.69inch * 23.62inch Loading Container 20GP: 177 cartons * 194 pcs = 34338 pcs 40HQ: 412 cartons * 194 pcs = 79928 pcs Best Sellers Rank #1582 in category: DJI & GoPro Accessories #127 in category: DJI & GoPro Accessories » DJI Mavic Series #5 in category: DJI & GoPro Accessories » DJI Mavic Series » Charger

1. Single-port charger and battery care device for the DJI Mavic 4 Pro, supports PD 65W and PD 100W. Charging time is approximately 55 minutes at PD 100W and 90 minutes at PD 65W. 2. Two modes: -Charge mode: Fully charges the battery. -Storage mode: Charges batteries below 60% to 60-65% for long-term storage. (Note: In this mode, batteries above approximately 60% will not be charged.) 3. Discharge mode: Converts the Mavic 4 Pro battery into a power bank, allowing it to charge USB devices (i.e., discharge the battery). 4. Extensive LED indicators: Operating mode, input power indicator, and temperature indicator. Parameters: 1. Input voltage: 5V-15V/3A; 20V-5A 2. DC output: 17.2V/7A (max) 3. USB output: 5V/2A (max) 4. Weight: 58g 5. Product dimensions: 6 x 5.8 x 3.3cm Note: This product does not include drone batteries. Specification: General Compatible with DJI: Mavic 4 Pro Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 8cm * 8cm * 7cm / 3.15inch * 3.15inch * 2.76inch Qty per Carton 144 Carton Weight 11.20kgs / 24.69lb Carton Size 44cm * 30cm * 32cm / 17.32inch * 11.81inch * 12.6inch Loading Container 20GP: 631 cartons * 144 pcs = 90864 pcs 40HQ: 1465 cartons * 144 pcs = 210960 pcs Best Sellers Rank #4106 in category: DJI & GoPro Accessories #336 in category: DJI & GoPro Accessories » DJI Mavic Series #13 in category: DJI & GoPro Accessories » DJI Mavic Series » Charger OEM/ODM are Welcome! we can make Customize design and print your logo

1. Suitable for the DJI Mavic 4 Pro Charger Battery Hub. Input PD 100W+. Two batteries can be fully charged simultaneously in just 90 minutes. 2. Intelligent Matching Safety Assurance: -- PD 65W or greater: Charge the lower-charged battery to the same level as the higher-charged battery first, then fully charge both batteries simultaneously. -- PD 65W or less: Charges in Charge Hub mode, starting from highest to lowest charge. 3. Three Operating Modes: -- Storage Mode: Charges batteries below 60% to 60-65% for long-term storage. (Note: In this mode, batteries above approximately 60% will not be charged.) -- Full Charge Mode: Fully charges the battery. -- Discharge Mode: Converts the Mavic 4 Pro battery into a power bank, charging USB devices, remote controls, or mobile phones. (Mavic 4 Pro batteries are not included.) 4. Comprehensive LED Lights: Charging Indicator, Operating Mode, Input Power Indicator, and Temperature Indicator. Parameters: 1. Charging Temperature: 0-40 degrees Celsius 2. Input Voltage: 5V-15V/3A; 20V/5A 3. DC Output: 17.2V/7A (Max) 4. USB Output: 5V/2.0A (Max) 5. Net Weight: 108g (including charging cable) 6. Dimensions: 11.7 x 10 x 4.8cm Packaging Contents: Charger x 1, USB-C to USB-C Charging Cable x 1 Specification: General Compatible with DJI: Mavic 4 Pro Package Weight One Package Weight 0.17kgs / 0.38lb One Package Size 15cm * 13cm * 8cm / 5.91inch * 5.12inch * 3.15inch Qty per Carton 45 Carton Weight 8.80kgs / 19.40lb Carton Size 41cm * 35cm * 37cm / 16.14inch * 13.78inch * 14.57inch Loading Container 20GP: 502 cartons * 45 pcs = 22590 pcs 40HQ: 1165 cartons * 45 pcs = 52425 pcs Best Sellers Rank #983 in category: DJI & GoPro Accessories #55 in category: DJI & GoPro Accessories » DJI Mavic Series #3 in category: DJI & GoPro Accessories » DJI Mavic Series » Charger OEM/ODM are Welcome! we can make Customize design and print your logo

1. This is a digital display car charger designed for DJI Mavic Air 2/Air 2S drones, supporting simultaneous charging for two batteries in approximately 100 minutes with a detachable DC cable. 2. Dual-Battery Rapid Charging: Equipped with intelligent chip control, it efficiently charges two batteries (compatible with both 13.2V and 12.6V versions) within ~100 minutes while ensuring stable performance. 3. Comprehensive Safety Protection System: Features multi-layer protections including over-charge protection (prevents battery damage), over-temperature protection (safe for continuous operation), over-current protection (circuit safety), over-load protection (prevents cable softening), over-voltage protection (avoids high-voltage risks), and short-circuit protection (auto power cutoff). 4. Real-Time LED Digital Display: The built-in screen visually monitors the charging status of both batteries simultaneously, providing clear operational feedback throughout the process. 5. Detachable DC Cable Design: Offers enhanced convenience for portability and storage, allowing flexible use in vehicles. 6. Dual-Output Versatility: Includes an additional USB-A output (5V/2A) to charge mobile devices or other accessories while powering drone batteries. 7. Charging Temperature: 7-40 degrees Celsius 8. Input: DC 12-16V 7A 9. Output 1: DC 12.6V or 13.2V 2.5A x 2 (MAX) 10. Output 2: USB-A DC 5V 2A 11. Net Weight: 183g Specification: General Compatible with DJI: Air 2S , Mavic Air 2 Package Weight One Package Weight 0.25kgs / 0.56lb One Package Size 20cm * 5cm * 12cm / 7.87inch * 1.97inch * 4.72inch Qty per Carton 60 Carton Weight 16.10kgs / 35.49lb Carton Size 38cm * 42cm * 35cm / 14.96inch * 16.54inch * 13.78inch Loading Container 20GP: 477 cartons * 60 pcs = 28620 pcs 40HQ: 1108 cartons * 60 pcs = 66480 pcs OEM/ODM are Welcome! we can make Customize design and print your logo