Dala Standard and Guinea Fowl feathers are natural, and dyed in bright bold colours. They are great for various craft applications such as in air drying clay ornament creation, paper craft and DIY card making, scrapbooking, jewellery making and loads of fun to include in any kids crafts.

Dala foamalite shapes are available in a variety of sizes. Choose from traditional, geometric shapes such as cubes, eggs, rings, and spheres and more; as well as cute and interesting character shapes.

Dala Ceramics@Home is thermo-set, water-based decorative paint for ceramics, glass and glazed pottery* that can be cured in your home oven. It forms a hard scratch; heat and chemical resistant film if cured correctly.

This is the ideal product for decorating glazed ceramics, pottery, glass, kitchen and bathroom tiles, tin and even enamel.

Chenille stems aka pipe cleaners are "chenille" covered wired. So versatile, they are a must for crafters.

Dala Standard and Guinea Fowl feathers are natural, and dyed in bright bold colours. They are great for various craft applications such as in air drying clay ornament creation, paper craft and DIY card making, scrapbooking, jewellery making and loads of fun to include in any kids crafts.

Start with acrylic.
Daler-Rowney Simply Acrylic brushes are made with golden Taklon and are synthetic material formulated to exhibit the qualities of the finest hair brushes.

Golden Taklon hair.
Simply Acrylic brushes cover a variety of shapes and sizes to fit all the needs of a beginner artist. They are available in a selection of sets.

When you need a little bit stronger grip for medium-weight materials, this reusable mat's your go-to. Its long-lasting adhesive secures Adhesive-Backed Deluxe Paper, Infusible Ink Transfer Sheets, even materials you may have at home like heavy cardstock for cutting and writing with your Cricut Joy™ machine. So you can make all sorts of things, from colorful coasters and T-shirts to custom gift tags. For use with Cricut Joy machines only.

A4 deep tint 160gsm project board pads 20 sheets.

Pack of 100 A4 pastel green 160gsm project boards.

A4 deep tint 80gsm project pads. 50 sheets.

Personalize a little or a lot. Make more in less time with Smart Materials™. This clever crafting material works without a cutting mat – just load and go. Now it's no biggie to create a quick, removable decal for your laptop or make a statement for your wall to bring the room together. Apply designs to almost any surface. For ultimate flexibility, this vinyl removes without residue. Whether you're all about tiny touches or shouting from the rooftops, you've got this. For use with Cricut Explore® 3 and Cricut Maker® 3.

Machine mat required for use with Cricut Maker, Cricut Explore, Cricut Explore One®, Cricut Explore Air®, Cricut Explore Air 2, and Cricut Expression machines.

Personalize a little or a lot. Make more in less time with Smart Materials™. This clever crafting material works without a cutting mat – just load and go. Now it's no biggie to create a quick, removable decal for your laptop or make a statement for your wall to bring the room together. Apply designs to almost any surface. For ultimate flexibility, this vinyl removes without residue. Whether you're all about tiny touches or shouting from the rooftops, you've got this. For use with Cricut Explore® 3 and Cricut Maker® 3.

Machine mat required for use with Cricut Maker, Cricut Explore, Cricut Explore One®, Cricut Explore Air®, Cricut Explore Air 2, and Cricut Expression machines.

Super-strong universal contact adhesive based on neoprene rubber. For innumerable repair and DIY jobs that require immediate bonding. Extremely suitable for materials under strain. Moisture and frost proof. Resistant to temperatures between -15 °C and +70 °C.

Suitable for:
Ideally suited for surface bonding or laminating of many materials that require immediate bonding, loading or processing.
Bonds wood, board, veneer, plastic and metal panel boards (HPL, Formica®, for example), (foam) rubber, leather, cork, canvas, linoleum and polyether foam (sound insulation), among other things, to itself as well as to many other surfaces.
Also for repairing shoes, bags, toys and carpets, or for doing (hobby) handicraft work.

Not suitable for: Polystyrene foam (Tempex®), PE, PP, PTFE and vinyl.

Working conditions: Use adhesive and parts to be bonded at room temperature only. The relative humidity must be below 65 %. This is to avoid formation of bubbles in the final product. Once attached, adjustment is no longer possible. Always test on an (inconspicuous) part of the surface first.
Surface requirements: Surfaces must be dry, clean, dust- and grease-free and a good fit.
Preliminary surface treatment: Clean and degrease the surfaces to be bonded for optimal results.
Tools: Use a solid brush or fine-toothed (1 mm) glue spreader to cover large surfaces. Use a roller or rubber mallet to join the materials firmly.
Preparation of product: Stir well before use. Should preferably not be diluted
Coverage: 2 - 2.5 m²/litre, applied on both sides, depending on the nature of the materials to be bonded.

Directions For Use
Parts must be clean, dry and free of grease.
Coat both substrates completely.
Allow to dry for a minimum of 10 - 40 minutes.
In case of porous materials, apply a second coat and let dry.
Then join parts and roll or tap firmly (with a rubber mallet).

Points of attention
For optimum results, both the adhesive and the parts to be bonded must be at room temperature (definitely do not use below +10 °C).
The final bonding strength depends on the pressure applied.
Therefore, press as firmly as possible across the entire surface.
Should the adhesive joint between porous materials be exposed to long-lasting contact with water, the adhesive may detach from the wet surface.
Stains/residue: Remove fresh adhesive residue immediately with Acetone. Dried adhesive residue can only be removed mechanically or with a paint remover (test first).

Storage conditions: Store properly closed in a cool and frost-free place. Shelf life is a minimum 24 months.

Shimmery, glimmery, and oh-so-stunningly gorgeous, this is the no-shed, no-flake glitter vinyl of your DIY dreams. And it lasts and lasts. Make more in less time with Smart Vinyl™. This clever crafting material works without a cutting mat – just load and go. Now it's no biggie to fashion a quick decal for your mug or indoor decor. Whether you're all about tiny touches or shouting from the rooftops, you've got this. For use with Cricut Explore™ 3 and Cricut Maker™ 3.

Nothing adds a touch of fab to your outfit or home decor like Smart Iron-On Glitter! This clever crafting material works without a cutting mat, so you can just load and go. So adding a little personality to a T-shirt, jean jacket, or a backpack is no sweat. Smart Iron-On works fabulously on a wide variety of materials and outlasts 50+ washes! For use with Cricut Explore® 3 and Cricut Maker® 3. For effortless application, use Cricut EasyPress®. Or apply with household iron.

Care Instructions

• Allow 24 hours after application before washing.
• Wash and tumble dry inside out.
• Do not bleach.
• If you need to iron, only iron on the backside of the garment.

Personalize a little or a lot. Make more in less time with Smart Materials™. This clever crafting material works without a cutting mat – just load and go. Now it's no biggie to create a quick, removable decal for your laptop or make a statement for your wall to bring the room together. Apply designs to almost any surface. For ultimate flexibility, this vinyl removes without residue. Whether you're all about tiny touches or shouting from the rooftops, you've got this. For use with Cricut Explore® 3 and Cricut Maker® 3.

Machine mat required for use with Cricut Maker, Cricut Explore, Cricut Explore One®, Cricut Explore Air®, Cricut Explore Air 2, and Cricut Expression machines.

Shimmery, glimmery, and oh-so-stunningly gorgeous, this is the no-shed, no-flake glitter vinyl of your DIY dreams. And it lasts and lasts. Make more in less time with Smart Vinyl™. This clever crafting material works without a cutting mat – just load and go. Now it's no biggie to fashion a quick decal for your mug or indoor decor. Whether you're all about tiny touches or shouting from the rooftops, you've got this. For use with Cricut Explore™ 3 and Cricut Maker™ 3.

Universal strong dual-component epoxy adhesive for repairing metal, pottery, porcelain, glass, pearls, precious stones and various synthetics. Temperature resistant, water resistant, chemical resistant and paintable.

Application
Suitable for: Repairs to metal, ceramics, porcelain, crystal, glass, pearls, precious stones and various synthetics (polyester, bakelite, formica, rigid polystyrene and acrylic glass (Perspex®).
Not suitable for: Polyethylene (PE), polypropylene (PP), PTFE and silicone rubber.

Handling
Before use: Working conditions- Only apply at temperatures between +10 °C and +35 °C. Product cures by mixing the resin and the hardener.
Surface requirements: The surface must be dry, clean and free of dust and grease.
Preliminary surface treatment: Degrease parts to be bonded with methylated spirit. Roughen smooth surfaces (sandpaper).
Tools: Mix the components by means of the supplied mixing bowl and spatula.
Mixture ratio: 1:1
Coverage: 1 ml = approx 10 cm² at a film thickness of 1 mm

Directions For Use:
Press out an equal amount of both components onto the enclosed mixing tray.
Mix these two equal parts well with a spatula until a mixture is obtained with a homogeneous colour.
Apply the mixture, which at room temperature (+20 °C) remains toolable for about 1.5 hours, as a thin layer on one of the two materials.
Join the materials and keep them in place for 7 hours.
Be careful not to move the parts before the adhesive has cured.
Resin and hardener must not come into contact with each other unless for usage.

Advice
Some types of synthetics can not be joined such as polyethylene and polypropylene. Use a piece of adhesive tape in order to keep the parts in place while the adhesive is curing.

Points of attention
Close well after use.
For optimum performance it is important to create a larger amount of adhesive and mix it very well.
Curing time depends on the temperature.
Adhesive does not cure below +5 °C.
Stains/residue: Remove wet stains immediately with warm water and soap. Cured adhesive residue can only be removed mechanically.

Storage conditions: Store in tightly closed packaging in a dry, cool and frost-free place.

A4 pastel 80gsm project pads. 50 sheets.