1. Specifically designed for DJI AIR 3 drone gimbal camera, precise mold opening, very fit and stable, and solid design to prevent accidental loosening 2. This AIR 3 camera lens cover is made of PC material, which is strong in toughness, does not damage the body, is durable and wear-resistant, beautiful and practical 3. The gimbal, camera, and sensor are all protected against dust, scratches, and collisions with foreign objects. It does not affect the storage of the drone and can be stored in the original bag, as well as in most handbags, waterproof cases, and backpacks on the market. Always protect the gimbal camera during storage and transportation to extend its service life and always keep it in new condition. 4. Snap-on design, installation and disassembly can be completed in one step. When disassembly, lift it up to disassemble, saving time and effort, and will not jam the lens. 5. Size: 76x87x91mm 6. Weight: 32g Specification: General Compatible with DJI: Air 3 Package Weight One Package Weight 0.09kgs / 0.20lb One Package Size 10cm * 9cm * 8cm / 3.94inch * 3.54inch * 3.15inch Qty per Carton 100 Carton Weight 8.50kgs / 18.74lb Carton Size 52cm * 37cm * 42cm / 20.47inch * 14.57inch * 16.54inch Loading Container 20GP: 330 cartons * 100 pcs = 33000 pcs 40HQ: 766 cartons * 100 pcs = 76600 pcs Best Sellers Rank #477 in category: DJI & GoPro Accessories #18 in category: DJI & GoPro Accessories » DJI Air Series #11 in category: DJI & GoPro Accessories » DJI Air Series » Other OEM/ODM are Welcome! we can make Customize design and print your logo

Features 1. An expansion bracket specially designed for DJI AIR 3. Various components can be installed through the 1/4 threaded port, such as action cameras, megaphones, owl searchlights, etc., and fill lights can be installed through the cold shoe openings on both sides (both sides are required Install them at the same time, otherwise it will affect flight stability). 2. Made of high-quality lightweight ABS material, it is wear-resistant and durable and will not affect the normal flight of DJI AIR 3. 3. Built-in silicone material, no need to worry about damaging or scratching the drone. 4. The installation is very simple, no other tools are required, and it can be quickly assembled and disassembled with its own screws. 5. An adapter suitable for GoPro and 1/4 double-head screws will be provided. Package List 1. Extension bracket x 1 2. Instructions x 1 3. 1/4 double-headed screw x 1 4. Silicone pad x 2 5. Fixing screw x 1 6. Thumb screw x 1 7. Adapter for GoPro x 1 Specification: General Compatible with DJI: Osmo Action 5 Pro , Osmo Action 4 , Air 3 , Osmo Action 3 Package Weight One Package Weight 0.09kgs / 0.19lb One Package Size 10cm * 11cm * 4cm / 3.94inch * 4.33inch * 1.57inch Qty per Carton 200 Carton Weight 17.00kgs / 37.48lb Carton Size 55cm * 42cm * 42cm / 21.65inch * 16.54inch * 16.54inch Loading Container 20GP: 274 cartons * 200 pcs = 54800 pcs 40HQ: 638 cartons * 200 pcs = 127600 pcs Best Sellers Rank #691 in category: DJI & GoPro Accessories #30 in category: DJI & GoPro Accessories » DJI Air Series #17 in category: DJI & GoPro Accessories » DJI Air Series » Other OEM/ODM are Welcome! we can make Customize design and print your logo

1. Specially designed for DJI Air 3, it fits the surface of the Air 3 body very well. 2. It can fix and protect the propeller to prevent rollover and damage during storage, making storage and transportation safer. 3. Made of high-quality ABS+silica gel, available in orange, gray, and black colors, strong toughness, high-strength molding, durable, and will not damage the Air 3 body and propellers. 4. The snap-on design is convenient for installation and disassembly, two gears are optional, and you can choose according to your personal needs, without squeezing the drone body and blades. 5. Lightweight design, small size, light weight, easy to carry, easy to store, and does not take up space. Specification: General Compatible with DJI: Air 3 Package Weight One Package Weight 0.05kgs / 0.11lb One Package Size 10cm * 6cm * 4cm / 3.94inch * 2.36inch * 1.57inch Qty per Carton 200 Carton Weight 9.00kgs / 19.84lb Carton Size 52cm * 25cm * 42cm / 20.47inch * 9.84inch * 16.54inch Loading Container 20GP: 488 cartons * 200 pcs = 97600 pcs 40HQ: 1133 cartons * 200 pcs = 226600 pcs Best Sellers Rank #194 in category: DJI & GoPro Accessories #8 in category: DJI & GoPro Accessories » DJI Air Series #5 in category: DJI & GoPro Accessories » DJI Air Series » Other

1. This product is suitable for the DJI Air 3/Air 3S three-battery charging manager. It supports charging three batteries simultaneously, is compatible with PD 65W/100W fast charging, and can convert the batteries into a power bank to supply power to USB devices. It is specially designed for drone users who pursue efficient charging and battery maintenance. (Does not include batteries) 2. Efficient and fast charging: -- Charges one battery in 50 minutes (with PD 100W input) or 60 minutes (with PD 65W input). -- Fully charges three batteries in 150 minutes (PD 100W) or 180 minutes (PD 65W). 3. Dual charging modes, protecting battery life: --Full Charge Mode: Quickly charges batteries to 100% for immediate use. --Storage Mode: Automatically charges batteries below 60% to 60%-65% to extend lifespan during long-term storage. 4. Power bank function: Convert DJI Air 3 batteries into a power source to charge USB devices (e.g., smartphones, tablets) via Type-C port. Parameters: 1. Input voltage: 5V - 20V / 5A (Max) 2. Output: 17.0V / 5.0A (Max) 3. TYPE-C output: 5V / 9V / 12V / 15V -- 3A; 20V -- 3.25A 4. Product weight: 97 grams Packaging List: 1 x 3-Channel Charging Hub 1 x USB-A to USB-C charging cable 1 x USB-C to USB-C charging cable Specification: General Compatible with DJI: Air 3S , Air 3 Package Weight One Package Weight 0.15kgs / 0.34lb One Package Size 20cm * 10cm * 4cm / 7.87inch * 3.94inch * 1.57inch Qty per Carton 120 Carton Weight 19.10kgs / 42.11lb Carton Size 38cm * 34cm * 47cm / 14.96inch * 13.39inch * 18.5inch Loading Container 20GP: 439 cartons * 120 pcs = 52680 pcs 40HQ: 1019 cartons * 120 pcs = 122280 pcs OEM/ODM are Welcome! we can make Customize design and print your logo

1. Suitable for DJI Air 3S /Air 3 2-way charger, which can support up to PD 100W, and it only takes 50 minutes to fully charge a battery (the product only has a charger, not a battery) 2. Two modes: Charging mode quickly charges the battery; Storage mode charges the battery with a battery level below 60% to about 60% for long-term storage, reducing battery attenuation and swelling caused by the drone battery being empty or fully charged 3. Charging time: about 60 minutes for each battery at 65W input; about 120 minutes for 2 batteries; about 50 minutes for each battery at 100W input, and about 100 minutes for 2 batteries. (PD 65W or 100W charger is recommended) 4. Intelligent chip control, stable input without damaging the battery 5. The battery can be discharged and used as a power bank to charge USB external device remote control or mobile phone Parameters: 1. Input voltage: 5V-20V/5A (Max) 2. Output: 17.0V/5.0A (Max) 3. TYPE-C output: 5V/9V/12V/15V--3A; 20V--3.25A 4. Product weight: 186g 5. Product size: 5 x 11.2 x 11.4cm Packing list: 1 x Dual-channel butler 1 x USB-A to USB-C charging cable 1 x USB-C to USB-C charging cable Specification: General Compatible with DJI: Air 3S , Air 3 Package Weight One Package Weight 0.22kgs / 0.47lb One Package Size 14cm * 14cm * 8cm / 5.51inch * 5.51inch * 3.15inch Qty per Carton 6 Carton Weight 13.80kgs / 30.42lb Carton Size 38cm * 50cm * 32cm / 14.96inch * 19.69inch * 12.6inch Loading Container 20GP: 438 cartons * 6 pcs = 2628 pcs 40HQ: 1018 cartons * 6 pcs = 6108 pcs Best Sellers Rank #1448 in category: DJI & GoPro Accessories #91 in category: DJI & GoPro Accessories » DJI Air Series #35 in category: DJI & GoPro Accessories » DJI Air Series » Other OEM/ODM are Welcome! we can make Customize design and print your logo

1. Customized protection, precise fit Air 3S drone 2. All-round protection, gimbal, lens, vision system integrated protection, anti-knock, anti-scratch and anti-dust 3. Anti-fall and anti-knock, one-piece molding design provides effective protection 4. Soft material will not hurt the drone, strong toughness, durable and easy to clamp 5. All-in-one protection, protect the gimbal, lens and vision system to prevent damage 6. Portable storage, multi-directional protection, worry-free storage of the gimbal and lens 7. Convenient installation, one step, fast and convenient installation experience 8. Main material: PC 9. Size: about 9.2 x 8.9 x 7.6cm 10. Weight: about 37.3g 11. Note: only the protective case, does not contain others Specification: General Compatible with DJI: Air 3S Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 11cm * 11cm * 10cm / 4.33inch * 4.33inch * 3.94inch Qty per Carton 70 Carton Weight 5.30kgs / 11.68lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 70 pcs = 30660 pcs 40HQ: 1018 cartons * 70 pcs = 71260 pcs Best Sellers Rank #548 in category: DJI & GoPro Accessories #24 in category: DJI & GoPro Accessories » DJI Air Series #14 in category: DJI & GoPro Accessories » DJI Air Series » Other OEM/ODM are Welcome! we can make Customize design and print your logo

1. Use the drone to deliver gifts, supplies, cast bait, etc., a variety of scenarios can be used 2. Lightweight design, no burden on the flight, load up to 200g, using the bottom of the drone remote control fill light to trigger the drop switch 3. Ultra-long distance remote control (how far the remote control can control how far) 4. Simple installation: - Insert the thrower into the front slit on the bottom of Air 3S - Press the rear snap, the installation is complete. 5. Material: PLA 6. Battery capacity: 55mAh 7. Charging time: about 0.5h 8. Charging port: Type-C 9. Size: about 7 x 6.5 x 1.8cm 10. Weight: about 22.8 11. Note: this product does not include a drone Specification: General Compatible with DJI: Air 3S Package Weight One Package Weight 0.05kgs / 0.12lb One Package Size 10cm * 8cm * 4cm / 3.94inch * 3.15inch * 1.57inch Qty per Carton 160 Carton Weight 9.00kgs / 19.84lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 160 pcs = 70080 pcs 40HQ: 1018 cartons * 160 pcs = 162880 pcs Best Sellers Rank #1425 in category: DJI & GoPro Accessories #88 in category: DJI & GoPro Accessories » DJI Air Series #34 in category: DJI & GoPro Accessories » DJI Air Series » Other OEM/ODM are Welcome! we can make Customize design and print your logo

1. Precisely Designed: Exclusively crafted for the DJI Air 3S drone gimbal camera. Features precision molding for a perfect fit, ensuring stability and secure attachment to prevent accidental loosening. 2. Durable Material: Made of durable plastic with strong toughness and wear resistance. The cover is equipped with silicone pads on both sides and the top, ensuring that installation does not damage the drone body while maintaining an attractive and practical design. 3. Comprehensive Protection: Offers integrated protection for the gimbal, camera, and sensors. Dustproof, scratch-resistant, and collision-proof, it safeguards against external impacts without interfering with drone storage. Compatible with the original carrying case, as well as most market-available handbags, waterproof cases, and backpacks. 4. Effortless Installation: Features a snap-on design for quick and easy installation or removal. Simply lift upward to remove, saving time and effort without risking damage to the lens. 5. Enhanced Longevity: Provides continuous protection for the gimbal camera during storage and transport, extending its lifespan and keeping it in like-new condition. Specification: General Compatible with DJI: Air 3S Package Weight One Package Weight 0.06kgs / 0.14lb One Package Size 12cm * 10cm * 8cm / 4.72inch * 3.94inch * 3.15inch Qty per Carton 200 Carton Weight 13.00kgs / 28.66lb Carton Size 45cm * 33cm * 52cm / 17.72inch * 12.99inch * 20.47inch Loading Container 20GP: 345 cartons * 200 pcs = 69000 pcs 40HQ: 801 cartons * 200 pcs = 160200 pcs Best Sellers Rank #247 in category: DJI & GoPro Accessories #9 in category: DJI & GoPro Accessories » DJI Air Series #6 in category: DJI & GoPro Accessories » DJI Air Series » Other

1. Integrated protection of the gimbal, lens and sensor: it can protect the omnidirectional vision system at the same time, preventing bumps, scratches and dust. 2. Fix the gimbal lens to extend the service life of the cable. 3. Transparent gray protective cover makes it easy to observe the status of the gimbal lens at any time. 4. Safe stored in original bag, Sunnylife B658 drone bag, B659 combo bag, B660 combo bag, and AQX-16 safety case. 5. Material: Plastic 6. Net weight: 26g Specification: General Compatible with DJI: Air 3S Package Weight One Package Weight 0.07kgs / 0.16lb One Package Size 10cm * 8cm * 8cm / 3.94inch * 3.15inch * 3.15inch Qty per Carton 100 Carton Weight 6.00kgs / 13.23lb Carton Size 52cm * 42cm * 33cm / 20.47inch * 16.54inch * 12.99inch Loading Container 20GP: 370 cartons * 100 pcs = 37000 pcs 40HQ: 858 cartons * 100 pcs = 85800 pcs Best Sellers Rank #1016 in category: DJI & GoPro Accessories #58 in category: DJI & GoPro Accessories » DJI Air Series #27 in category: DJI & GoPro Accessories » DJI Air Series » Other OEM/ODM are Welcome! we can make Customize design and print your logo

1. Tailor-made for DJI Flip, real machine mold, exclusive card slot, reasonable layout, and large capacity make travel easier; 2. Anti-fall, pressure-resistant and wear-resistant hard shell protection, fully protect your drone, safe and worry-free; 3. Built-in large net bag, ample space, easy to store various accessories, in an orderly manner; 4. Lycra material is one-piece molded, precise fit, effectively fixed compartment separation, prevent collision and friction; 5. Waterproof appearance design, worry-free outdoor, strong and durable, as good as new; 6. Hand-held and cross-body dual-purpose, lightweight design, making outdoor travel easier and more comfortable. 7. Main material: PU + Lycra 8. Product size: 35 x 12 x 27cm 9. Net weight: 27.3oz. (780g) Specification: General Compatible with DJI: Flip Package Weight One Package Weight 1.10kgs / 2.43lb One Package Size 36cm * 28cm * 13cm / 14.17inch * 11.02inch * 5.12inch Qty per Carton 10 Carton Weight 12.00kgs / 26.46lb Carton Size 66cm * 56cm * 37cm / 25.98inch * 22.05inch * 14.57inch Loading Container 20GP: 195 cartons * 10 pcs = 1950 pcs 40HQ: 452 cartons * 10 pcs = 4520 pcs Best Sellers Rank #2799 in category: DJI & GoPro Accessories #258 in category: DJI & GoPro Accessories » DJI Mavic Series #41 in category: DJI & GoPro Accessories » DJI Mavic Series » Backpacks & Bags

1. U-shaped portable drone shooting stand, ergonomic design, with wear-resistant high-density sponge, comfortable and easy to use, lightweight and portable, more comfortable without pinching the hand, no pressure to carry when traveling; 2. Unlock new ways to play with drones, suitable for a variety of shooting scenes such as micro-film shooting, wedding shooting, daily recording, etc. 3. Equipped with RC 2 remote control, real-time screen preview, adjust the shooting effect at any time; can also be equipped with fill light, night flight light and other professional shooting equipment; 4. Material: ABS+sponge+metal 5. Net weight: about 486g Packing list: U-shaped handheld stabilizer x 1 Aluminum alloy base x 1 Body clamp x 1 Aluminum alloy universal head x 1 1/4 double-layer metal hot shoe seat x 3 Three-head hot shoe metal base x 2 Specification: General Compatible with DJI: Flip Package Weight One Package Weight 0.58kgs / 1.29lb One Package Size 28cm * 25cm * 12cm / 11.02inch * 9.84inch * 4.72inch Qty per Carton 6 Carton Weight 4.60kgs / 10.14lb Carton Size 28cm * 48cm * 32cm / 11.02inch * 18.9inch * 12.6inch Loading Container 20GP: 620 cartons * 6 pcs = 3720 pcs 40HQ: 1439 cartons * 6 pcs = 8634 pcs Best Sellers Rank #844 in category: DJI & GoPro Accessories #46 in category: DJI & GoPro Accessories » DJI Mavic Series #12 in category: DJI & GoPro Accessories » DJI Mavic Series » Holder Series OEM/ODM are Welcome! we can make Customize design and print your logo

1. Specifically designed for DJI Flip batteries, equipped with a color screen and three-channel charging function. Supports PD 65W+ input, can charge three batteries simultaneously, and is fully charged in approximately 73 minutes (product does not include batteries). 2. Intelligent power matching and safety guarantee: Automatically switches charging mode based on input power (simultaneously or sequentially charging), and has built-in overcurrent, overheat, and short circuit protection mechanisms to ensure safety and efficiency. 3. Dual-function design: Charger + portable power bank, converts FLIP batteries into portable power banks, and charges external devices such as mobile phones and remote controllers through a 5V/2A USB-A interface. 4. Dual charging modes to extend battery life: -- Full charge mode: Quickly charges the battery; -- Storage mode: Charges batteries with less than 60% battery to 60%-65%, suitable for long-term storage (batteries above 60% do not charge). 5. Real-time power display: Without installing the battery in the drone, simply insert the charger and view the battery level through the color screen (automatically displayed in 15 seconds), always keeping track of the battery status. Parameters: 1. Charging temperature: 0 - 40 degrees 2. Input voltage: 5V/9V/12V/15V/20V -- 3A 3. DC output: 8.6V/8A (Maximum) 4. USB output: 5V/2.0A (Maximum) 5. Net product weight: 127g (excluding wire weight) 6. Product size: 14.7 x 6.4 x 3.2 cm Product list: Color screen three-output charger x1 USB-A to USB-C charging cable x1 USB-C to USB-C charging cable x1 Specification: General Compatible with DJI: Flip Package Weight One Package Weight 0.18kgs / 0.41lb One Package Size 18cm * 10cm * 5cm / 7.09inch * 3.94inch * 1.97inch Qty per Carton 80 Carton Weight 15.50kgs / 34.17lb Carton Size 34cm * 38cm * 42cm / 13.39inch * 14.96inch * 16.54inch Loading Container 20GP: 491 cartons * 80 pcs = 39280 pcs 40HQ: 1140 cartons * 80 pcs = 91200 pcs OEM/ODM are Welcome! we can make Customize design and print your logo

1. The gimbal protective cover designed for DJI Flip drone is precisely molded and fits well. The buckle design on both sides is firm and stable to prevent accidental loosening; 2. This camera lens cover is made of plastic material, which is tough, durable and wear-resistant. It will not damage the fuselage during installation. It is beautiful and practical; 3. The gimbal and infrared sensor are integrated to protect against dust, scratches and collisions with foreign objects. It does not affect the storage of the drone. It can be stored in the original bag and most handbags, waterproof boxes and backpacks on the market; 4. The buckle design allows one-step installation and disassembly. The buckle finger position has rough lines on both sides and an anti-slip design. When disassembling, just press on both sides to remove it, saving time and effort, and will not get the lens stuck; 5. It can be used to protect the gimbal camera at all times during storage and transportation, extend the service life, and always keep it in a brand new state. Specification: Package Weight One Package Weight 0.03kgs / 0.07lb One Package Size 8cm * 6cm * 5cm / 3.15inch * 2.36inch * 1.97inch Qty per Carton 300 Carton Weight 9.00kgs / 19.84lb Carton Size 52cm * 42cm * 37cm / 20.47inch * 16.54inch * 14.57inch Loading Container 20GP: 330 cartons * 300 pcs = 99000 pcs 40HQ: 766 cartons * 300 pcs = 229800 pcs Best Sellers Rank #643 in category: DJI & GoPro Accessories #48 in category: DJI & GoPro Accessories » DJI Mavic Series #2 in category: DJI & GoPro Accessories » DJI Mavic Series » Lens Hood

1. 2 in 1 Base & Display Stand. The stand has both practical and artistic value. 2. Perfect Fit Drone Structure. You just need to gently put drone on the display stand, then it holds your drone closely. 3. Stable Structure. The center of gravity at low point ensures the stand solidly holding your drone, and not easy tip over. 4. Material: Plastic 5. Net Weight: 56g Specification: Package Weight One Package Weight 0.10kgs / 0.22lb One Package Size 13cm * 9cm * 5cm / 5.12inch * 3.54inch * 1.97inch Qty per Carton 100 Carton Weight 9.00kgs / 19.84lb Carton Size 47cm * 52cm * 27cm / 18.5inch * 20.47inch * 10.63inch Loading Container 20GP: 404 cartons * 100 pcs = 40400 pcs 40HQ: 938 cartons * 100 pcs = 93800 pcs Best Sellers Rank #995 in category: DJI & GoPro Accessories #79 in category: DJI & GoPro Accessories » DJI Mavic Series #15 in category: DJI & GoPro Accessories » DJI Mavic Series » Holder Series

1. Main material: ABS 2. For DJI Mavic 3/Mavic 3 Pro 3. USB charging, quick release, one-click remote control 4. Lightweight and safe, neither increasing the burden on the drone nor damaging the drone, easy to install and disassemble 5. The front landing gear is increased by 3.7cm and the rear landing gear is increased by 3cm, effectively preventing ground debris from contaminating the body or damaging the gimbal and fuselage during take-off and landing. 6. It can be delivered remotely, for advertising, throwing bait, throwing gifts, delivering meals, sending wedding rings, etc. 7. Weight bearing: 500g (MAX) 8. Built-in battery capacity: 150mAh 9. Standby time: about 12 hours 10. Can be turned on once charging: about 300 times 11. Self-charging time: 1.5 hours 12. Net weight: 86.7g 13. Size: 9.4x8.5x5cm (thrower), 8.7x2x1.8cm (forefoot), 5.5x2x2.2cm (backefoot) 14. Note: "The red light is always on" during charging, "The green light is always on" full charge, and the red light will flash a few times when the parabolic is turned on and used normally, and then "The red light is always on" 15. Packaging list: thrower x 1; heightening tripod (set) x 1; USB charging cable x 1; hanging cable hook x 1; iron ring x 1; manual x 1 Specification: General Compatible with DJI: Mavic 3 Pro , Mavic 3 Package Weight One Package Weight 0.15kgs / 0.32lb One Package Size 11cm * 14cm * 8cm / 4.33inch * 5.51inch * 3.15inch Qty per Carton 32 Carton Weight 5.70kgs / 12.57lb Carton Size 46cm * 30cm * 34cm / 18.11inch * 11.81inch * 13.39inch Loading Container 20GP: 568 cartons * 32 pcs = 18176 pcs 40HQ: 1319 cartons * 32 pcs = 42208 pcs OEM/ODM are Welcome! we can make Customize design and print your logo

1. Available in PU/nylon materials, shock-proof, compression-proof, waterproof and drop-proof 2. Lycra shock-absorbing lining is formed in one piece, and the holes are accurately positioned to fit the equipment and accessories, preventing collision and friction, effectively fixing, and separating the layers. 3. The internal space is fully utilized and can store the body, remote control, batteries, charging butler, data cables, paddles and other accessories. 4. Two-way metal zipper design, the zipper closes smoothly and does not get stuck. 5. Detachable strap, the length of the strap is adjustable and can be carried by hand or cross-body when traveling. 6. Material: Nylon/PU+Lycra 7. Dimensions: 32 x 31 x 11.5cm 8. Weight: nylon model is about 882g, PU model is about 813g 9. Only the storage bag is shipped, and the displayed drone and other accessories are not included. Specification: General Compatible with DJI: Air 3 Package Weight One Package Weight 1.25kgs / 2.76lb One Package Size 34cm * 32cm * 12cm / 13.39inch * 12.6inch * 4.72inch Qty per Carton 4 Carton Weight 6.10kgs / 13.45lb Carton Size 34cm * 36cm * 50cm / 13.39inch * 14.17inch * 19.69inch Loading Container 20GP: 435 cartons * 4 pcs = 1740 pcs 40HQ: 1011 cartons * 4 pcs = 4044 pcs Best Sellers Rank #908 in category: DJI & GoPro Accessories #50 in category: DJI & GoPro Accessories » DJI Air Series #15 in category: DJI & GoPro Accessories » DJI Air Series » Carry Cases & Bags OEM and ODM Sewing are Welcome! we can make it with your design and logo

1. Available in PU/nylon materials, shock-proof, compression-proof, waterproof and drop-proof 2. Lycra shock-absorbing lining is formed in one piece, and the holes are accurately positioned to fit the equipment and accessories, preventing collision and friction, effectively fixing, and separating the layers. 3. The internal space is fully utilized and can store the body, remote control, batteries, charging butler, data cables, paddles and other accessories. 4. Two-way metal zipper design, the zipper closes smoothly and does not get stuck. 5. Detachable strap, the length of the strap is adjustable and can be carried by hand or cross-body when traveling. 6. Material: Nylon/PU+Lycra 7. Dimensions: 32 x 31 x 11.5cm 8. Weight: nylon model is about 882g, PU model is about 813g 9. Only the storage bag is shipped, and the displayed drone and other accessories are not included. Specification: General Compatible with DJI: Air 3 Package Weight One Package Weight 1.25kgs / 2.76lb One Package Size 34cm * 32cm * 12cm / 13.39inch * 12.6inch * 4.72inch Qty per Carton 4 Carton Weight 6.10kgs / 13.45lb Carton Size 34cm * 36cm * 50cm / 13.39inch * 14.17inch * 19.69inch Loading Container 20GP: 435 cartons * 4 pcs = 1740 pcs 40HQ: 1011 cartons * 4 pcs = 4044 pcs Best Sellers Rank #908 in category: DJI & GoPro Accessories #50 in category: DJI & GoPro Accessories » DJI Air Series #15 in category: DJI & GoPro Accessories » DJI Air Series » Carry Cases & Bags OEM and ODM Sewing are Welcome! we can make it with your design and logo

1. Applicable batteries: Matrice 4 series batteries 2. Operating temperature: 5 - 40 degree Celsius 3. Input: 100V-240V 2.5A 50Hz/60Hz 230W 4. Output: 5V 3A, 9V 3A, 12V 3A, 15V 2.4A, 20V 1.8A 36W Max 5. Charging power: 180W Max(single battery)/200W Max(multiple batteries) 6. Display size: 1.5-inch IPS wide viewing angle screen 7. Packing list: charger x 1, adapter x 1, Matrice 4 series battery charging cable x 3, dual Type-C port cable x 1, manual x 1 8. Weight: about 380g 9. Size: about 13.8 x 6.4 x 5.2cm 10. Note: only charger, no others included Features: 1. 200W high power output, can be connected to 3 batteries and fast charging at the same time 2. 100% full charge/100% silent/60% storage 3 charging modes, to meet the charging needs of different scenarios 3. Type-C port can also charge drone remote control, sports camera, cell phone and other electronic devices 4. Under full charge mode (charging to 100%), it takes about 56 minutes to fully charge the first battery, 95 minutes for the second battery, and 110 minutes for the third battery 5. Built-in high-efficiency silent fan, subtle airflow design, active cooling, fast charging, heat dissipation 6. 1.5-inch IPS wide viewing angle screen, charging parameters, mode selection, battery information, OTA progress, detailed parameters at a glance 7. 3 battery output ports + 1 Type-C output port, battery output port can be adapted to different models of batteries (different battery charging cables need to be provided) 8. With six-fold protection of over-temperature / over-voltage / over-current / short-circuit / under-voltage / over-power Specification: General Compatible with DJI: Matrice 4T , Matrice 4E Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 17cm * 15cm * 8cm / 6.69inch * 5.91inch * 3.15inch Qty per Carton 36 Carton Weight 19.00kgs / 41.89lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 36 pcs = 15768 pcs 40HQ: 1018 cartons * 36 pcs = 36648 pcs OEM/ODM are Welcome! we can make Customize design and print your logo

1. Applicable batteries: Matrice 4 series batteries 2. Operating temperature: 5 - 40 degree Celsius 3. Input: 100V-240V 2.5A 50Hz/60Hz 230W 4. Output: 5V 3A, 9V 3A, 12V 3A, 15V 2.4A, 20V 1.8A 36W Max 5. Charging power: 180W Max(single battery)/200W Max(multiple batteries) 6. Display size: 1.5-inch IPS wide viewing angle screen 7. Packing list: charger x 1, adapter x 1, Matrice 4 series battery charging cable x 3, dual Type-C port cable x 1, manual x 1 8. Weight: about 380g 9. Size: about 13.8 x 6.4 x 5.2cm 10. Note: only charger, no others included Features: 1. 200W high power output, can be connected to 3 batteries and fast charging at the same time 2. 100% full charge/100% silent/60% storage 3 charging modes, to meet the charging needs of different scenarios 3. Type-C port can also charge drone remote control, sports camera, cell phone and other electronic devices 4. Under full charge mode (charging to 100%), it takes about 56 minutes to fully charge the first battery, 95 minutes for the second battery, and 110 minutes for the third battery 5. Built-in high-efficiency silent fan, subtle airflow design, active cooling, fast charging, heat dissipation 6. 1.5-inch IPS wide viewing angle screen, charging parameters, mode selection, battery information, OTA progress, detailed parameters at a glance 7. 3 battery output ports + 1 Type-C output port, battery output port can be adapted to different models of batteries (different battery charging cables need to be provided) 8. With six-fold protection of over-temperature / over-voltage / over-current / short-circuit / under-voltage / over-power Specification: General Compatible with DJI: Matrice 4T , Matrice 4E Package Weight One Package Weight 0.50kgs / 1.11lb One Package Size 17cm * 15cm * 8cm / 6.69inch * 5.91inch * 3.15inch Qty per Carton 36 Carton Weight 19.00kgs / 41.89lb Carton Size 50cm * 38cm * 32cm / 19.69inch * 14.96inch * 12.6inch Loading Container 20GP: 438 cartons * 36 pcs = 15768 pcs 40HQ: 1018 cartons * 36 pcs = 36648 pcs OEM/ODM are Welcome! we can make Customize design and print your logo

1. Compatible with all Mavic series, Mavic 3 / Mavic 2 / Mavic Pro 2. Tailor-made, stable support, fits the bottom structure of Mavic series drones, it is stable and not easy to fall off when placed lightly. 3. The intuitive display angle can better display the shape of the aircraft, and it can be unfolded or folded for display. 4. Low center of gravity and stable support, no shaking or tipping. 5. Note: The product only includes the bracket, nothing else Specification: 1. Model: ZJ566 2. Material: plastic 3. Net weight: 93g Specification: General Compatible with DJI: Mavic 3 , Mavic 2 Pro , Mavic 2 , Mavic Pro Package Weight One Package Weight 0.15kgs / 0.33lb One Package Size 16cm * 10cm * 7cm / 6.3inch * 3.94inch * 2.76inch Qty per Carton 100 Carton Weight 14.00kgs / 30.86lb Carton Size 52cm * 37cm * 33cm / 20.47inch * 14.57inch * 12.99inch Loading Container 20GP: 420 cartons * 100 pcs = 42000 pcs 40HQ: 975 cartons * 100 pcs = 97500 pcs Best Sellers Rank #696 in category: DJI & GoPro Accessories #54 in category: DJI & GoPro Accessories » DJI Mavic Series #9 in category: DJI & GoPro Accessories » DJI Mavic Series » Holder Series OEM/ODM are Welcome! we can make Customize design and print your logo

1. U-shaped portable drone shooting stand, ergonomic design, with wear-resistant high-density sponge, comfortable and easy to use, lightweight and portable, more comfortable without pinching the hand, no pressure to carry when traveling; 2. Unlock new ways to play with drones, suitable for a variety of shooting scenes such as micro-film shooting, wedding shooting, daily recording, etc. 3. Equipped with RC 2 remote control, real-time screen preview, adjust the shooting effect at any time; can also be equipped with fill light, night flight light and other professional shooting equipment; 4. Material: ABS+sponge+metal 5. Net weight: about 486g Packing list: U-shaped handheld stabilizer x 1 Aluminum alloy base x 1 Body clamp x 1 Aluminum alloy universal head x 1 1/4 double-layer metal hot shoe seat x 3 Three-head hot shoe metal base x 2 Specification: General Compatible with DJI: Mavic 3 Pro Package Weight One Package Weight 0.58kgs / 1.29lb One Package Size 28cm * 25cm * 12cm / 11.02inch * 9.84inch * 4.72inch Qty per Carton 6 Carton Weight 4.60kgs / 10.14lb Carton Size 28cm * 48cm * 32cm / 11.02inch * 18.9inch * 12.6inch Loading Container 20GP: 620 cartons * 6 pcs = 3720 pcs 40HQ: 1439 cartons * 6 pcs = 8634 pcs Best Sellers Rank #844 in category: DJI & GoPro Accessories #46 in category: DJI & GoPro Accessories » DJI Mavic Series #12 in category: DJI & GoPro Accessories » DJI Mavic Series » Holder Series OEM/ODM are Welcome! we can make Customize design and print your logo

1. Drone remote delivery, used for advertising, throwing fish bait to send gifts, food delivery, wedding ring throwing, etc. 2. With charging indicator, red light when charging, green light when full 3. Suitable for DJI Mavic 3 Pro / 3 / 3 Classic / 3 Cine 4. Load: up to 500g 5. Built-in battery capacity: 150mAh 6. Standby time: about 12 hours 7. One charge can be turned on about: 200 times 8. Charging time: about 1.5 hours 9. Charging port: Type-C 10. Material: ABS+PCB 11. Net weight: about 82g 12. Description: only the thrower, does not include other products such as the drone in the picture Installation steps: 1. Unfold the bracket 2. Align the front of the bracket with the slot of the drone and press down 3. Put the adhesive tape into the hole on one side of the folding bracket and tighten it Disassembly: open it by breaking the buckle upward Specification: General Compatible with DJI: Mavic 3 Pro , Mavic 3 Classic , Mavic 3 Package Weight One Package Weight 0.16kgs / 0.36lb One Package Size 11cm * 15cm * 7cm / 4.33inch * 5.91inch * 2.76inch Qty per Carton 182 Carton Weight 30.00kgs / 66.14lb Carton Size 62cm * 85cm * 39cm / 24.41inch * 33.46inch * 15.35inch Loading Container 20GP: 129 cartons * 182 pcs = 23478 pcs 40HQ: 301 cartons * 182 pcs = 54782 pcs Best Sellers Rank #3085 in category: DJI & GoPro Accessories #272 in category: DJI & GoPro Accessories » DJI Mavic Series #35 in category: DJI & GoPro Accessories » DJI Mavic Series » Holder Series OEM/ODM are Welcome! we can make Customize design and print your logo

1. Suitable for the DJI Mavic 3 battery charger, supporting simultaneous charging of 3 batteries, and featuring discharge and storage modes. 2. Dual input mode: The input supports AC 100- 240V and DC 11- 14V. 3. Three working modes: 1) Charging mode: Can charge 1-3 batteries and one USB device simultaneously. Charging 2 batteries simultaneously takes approximately 100 minutes, and charging 3 batteries simultaneously takes approximately 150 minutes. 2) Storage charging mode: Automatically stops working when the battery reaches 60-65% through charging or discharging. In this mode, batteries with higher charge levels discharge while those with lower charge levels charge. 3) Discharge mode: Connect a discharger to discharge the battery to 5-80%. The default discharge cut-off level is 15%, and the discharge cut-off level can be set within the discharge range. 4. Controlled by an intelligent chip for stable charging without damaging the battery. 5. No need to place the battery on the drone. Check the battery level anytime, anywhere. When the battery is inserted into the charger, the battery level will be displayed for 5 seconds. Product Parameters: 1. Input: 11-14V/10A (Max) 2. Output: 17.6V/2.0A x 3 or 17.6V/3.0A x 2 3. USB Output: 5V/3A 4. Total Output Power: 120W (Max) 5. Discharge Power: 18W (Max) 6. Charging Environment Temperature: 0-40 degrees Celsius 7. Product Dimensions: 15.3 x 4.1 x 7cm (Power Supply) 18 x 5.5 x 3cm (Charger) 5 x 6 x 3.5cm (Discharger) Note: The product does not contain batteries Specification: General Compatible with DJI: Mavic 3 Pro , Mavic 3 Package Weight One Package Weight 0.86kgs / 1.90lb One Package Size 27cm * 22cm * 8cm / 10.63inch * 8.66inch * 3.15inch Qty per Carton 10 Carton Weight 9.70kgs / 21.38lb Carton Size 27cm * 42cm * 37cm / 10.63inch * 16.54inch * 14.57inch Loading Container 20GP: 635 cartons * 10 pcs = 6350 pcs 40HQ: 1475 cartons * 10 pcs = 14750 pcs Best Sellers Rank #1591 in category: DJI & GoPro Accessories #185 in category: DJI & GoPro Accessories » DJI Mavic Series #9 in category: DJI & GoPro Accessories » DJI Mavic Series » Charger OEM/ODM are Welcome! we can make Customize design and print your logo

1. Suitable for the DJI Mavic 3 battery charger, supporting simultaneous charging of 3 batteries, and featuring discharge and storage modes. 2. Dual input mode: The input supports AC 100- 240V and DC 11- 14V. 3. Three working modes: 1) Charging mode: Can charge 1-3 batteries and one USB device simultaneously. Charging 2 batteries simultaneously takes approximately 100 minutes, and charging 3 batteries simultaneously takes approximately 150 minutes. 2) Storage charging mode: Automatically stops working when the battery reaches 60-65% through charging or discharging. In this mode, batteries with higher charge levels discharge while those with lower charge levels charge. 3) Discharge mode: Connect a discharger to discharge the battery to 5-80%. The default discharge cut-off level is 15%, and the discharge cut-off level can be set within the discharge range. 4. Controlled by an intelligent chip for stable charging without damaging the battery. 5. No need to place the battery on the drone. Check the battery level anytime, anywhere. When the battery is inserted into the charger, the battery level will be displayed for 5 seconds. Product Parameters: 1. Input: 11-14V/10A (Max) 2. Output: 17.6V/2.0A x 3 or 17.6V/3.0A x 2 3. USB Output: 5V/3A 4. Total Output Power: 120W (Max) 5. Discharge Power: 18W (Max) 6. Charging Environment Temperature: 0-40 degrees Celsius 7. Product Dimensions: 15.3 x 4.1 x 7cm (Power Supply) 18 x 5.5 x 3cm (Charger) 5 x 6 x 3.5cm (Discharger) Note: The product does not contain batteries Specification: General Compatible with DJI: Mavic 3 Pro , Mavic 3 Package Weight One Package Weight 0.81kgs / 1.79lb One Package Size 27cm * 22cm * 8cm / 10.63inch * 8.66inch * 3.15inch Qty per Carton 10 Carton Weight 9.20kgs / 20.28lb Carton Size 27cm * 42cm * 37cm / 10.63inch * 16.54inch * 14.57inch Loading Container 20GP: 635 cartons * 10 pcs = 6350 pcs 40HQ: 1475 cartons * 10 pcs = 14750 pcs Best Sellers Rank #1591 in category: DJI & GoPro Accessories #185 in category: DJI & GoPro Accessories » DJI Mavic Series #9 in category: DJI & GoPro Accessories » DJI Mavic Series » Charger OEM/ODM are Welcome! we can make Customize design and print your logo

1. Suitable for the DJI Mavic 3 battery charger, supporting simultaneous charging of 3 batteries, and featuring discharge and storage modes. 2. Dual input mode: The input supports AC 100- 240V and DC 11- 14V. 3. Three working modes: 1) Charging mode: Can charge 1-3 batteries and one USB device simultaneously. Charging 2 batteries simultaneously takes approximately 100 minutes, and charging 3 batteries simultaneously takes approximately 150 minutes. 2) Storage charging mode: Automatically stops working when the battery reaches 60-65% through charging or discharging. In this mode, batteries with higher charge levels discharge while those with lower charge levels charge. 3) Discharge mode: Connect a discharger to discharge the battery to 5-80%. The default discharge cut-off level is 15%, and the discharge cut-off level can be set within the discharge range. 4. Controlled by an intelligent chip for stable charging without damaging the battery. 5. No need to place the battery on the drone. Check the battery level anytime, anywhere. When the battery is inserted into the charger, the battery level will be displayed for 5 seconds. Product Parameters: 1. Input: 11-14V/10A (Max) 2. Output: 17.6V/2.0A x 3 or 17.6V/3.0A x 2 3. USB Output: 5V/3A 4. Total Output Power: 120W (Max) 5. Discharge Power: 18W (Max) 6. Charging Environment Temperature: 0-40 degrees Celsius 7. Product Dimensions: 15.3 x 4.1 x 7cm (Power Supply) 18 x 5.5 x 3cm (Charger) 5 x 6 x 3.5cm (Discharger) Note: The product does not contain batteries Specification: General Compatible with DJI: Mavic 3 Pro , Mavic 3 Package Weight One Package Weight 0.86kgs / 1.90lb One Package Size 27cm * 22cm * 8cm / 10.63inch * 8.66inch * 3.15inch Qty per Carton 10 Carton Weight 9.70kgs / 21.38lb Carton Size 27cm * 42cm * 37cm / 10.63inch * 16.54inch * 14.57inch Loading Container 20GP: 635 cartons * 10 pcs = 6350 pcs 40HQ: 1475 cartons * 10 pcs = 14750 pcs Best Sellers Rank #1591 in category: DJI & GoPro Accessories #185 in category: DJI & GoPro Accessories » DJI Mavic Series #9 in category: DJI & GoPro Accessories » DJI Mavic Series » Charger OEM/ODM are Welcome! we can make Customize design and print your logo