Trustfire MINIX white + red / UV light multi-purpose key light
Max lumens 320LM Max Beam distance  86m Dual light source design, one light for multiple uses

Available in four colors, each light is paired with two light sources, white + red light or white + UV light.

Cool black (white + red light), diamond blue (white + red light), the ultimate gray (white + UV light), luxury purple (white + UV light) Red light source, long range, strong penetration

MINI X uses 620nm wavelength red light source, strong penetration, suitable for warning lighting, early warning emergency, signal distress, and the effect of mosquito repellent. Warning lighting, early warning and emergency

Walk alone in the dark, turn on the red light mode, play a warning lighting, early warning emergency, etc., 620nm has a strong penetrating power, can be quickly discovered by teammates.
Wilderness survival necessary signal distress light Wilderness survival necessary signal distress light

In case of danger, turn on the MINI X red flashing mode in time to send SOS distress signal; MINI X with 3.7V 300mAh lithium polymer battery, red flashing up to 9 hours, the necessary flashlight for wilderness survival. Camping in the wild. Red light repels mosquitoes

When camping in the wild, the MINI X's red light also has a mosquito-repelling effect, repelling mosquitoes from the tent and keeping them away from bites.

Too many mosquitoes, can't sleep at all

MINI X's red light repels mosquitoes, so you can sleep through the night. MIN X uses 365nm wavelength UV light source

UV light is also called UV light source, UV light wavelength range in 200-400nm, 365nm wavelength belongs to the long-wave UV.

Bacteria detection

365nm is widely used to detect ringworm, acne, ringworm of the head, ringworm of white, ringworm of flowers, ringworm of red, ringworm of axillary hair; certain pigmented lesions such as chloasma, age spots, coffee spots, etc., as well as neurofibroma, skin tumors, vitiligo, etc. All are commonly used in dermatology.

Fluorescent agent detection

365nm ultraviolet light, in clean objects, irradiation shows white, only in the object fluorescent agent, shows blue; many products in life and fluorescent agent, are harmful to the human body, we can detect through MINI X, for example: diapers, saliva wipes, shoes, clothing, paper towels, toys, blankets, masks, lotions, nail polish, laundry detergent, face wash, sanitary napkins. etc. can be tested for the presence of fluorescent agents. Banknote inspection

365nm ultraviolet light can also detect the authenticity of banknotes; when collecting money and making change, shine a light at any time to avoid receiving counterfeit money.
Animal skin testing & Bathroom bacteria detection
Diaper fluorescent agent detection
& Mask fluorescence agent detection YPE-C fast charging

Charging instructions.
1. Turn off the flashlight, remove the waterproof cap on the side of the flashlight, and insert the Type-C interface of the charging cable into the charging socket of the flashlight.
2. When the flashlight receives a charging signal, the charging indicator will light up in red, and turn to green when the flashlight is fully charged.
3. After charging operation, you should unplug the charging cable and press the waterproof cover back tightly to ensure the waterproof performance of the flashlight, and then you can use the flashlight normally.   One-button operation

Single button independent control, can control the flashlight switch, white light intensity regulation, can switch to red light / UV light, red light / UV light flashing, also can lock the flashlight switch to prevent accidental touch.

Long press the switch for 0.5s to turn on/off the flashlight

Change modes

White light mode: click the switch to switch modes in sequence of moonlight mode → low mode → middle mode → high mode.
Red light mode and purple light mode: click the switch to switch modes in sequence of red light mode/purple light mode → red flashing/purple flashing.
◎ Memory Mode
When the flashlight is in any mode under white light mode, it will automatically memorize the current working mode. After it is turned off, it will start to work in the current memory mode.
Lock: When the flashlight is turned off, double click the switch quickly to enter lock mode, the flashlight will flash twice and then enter lock mode.
Lock: When the flashlight is turned off, double click the switch quickly to enter lock mode, the flashlight will flash twice and then enter lock mode. Power indicator
When the flashlight is turned off, please touch the top switch and you will see the power indicator lights up and go out automatically after 2 seconds. Different colors show different remaining battery power, the corresponding relationship is as follows:

Green: 80%-100% Yellow: 20%-80% Red: 5%-20% Red flashing: 1%-5% IP66 level of protection
Up to 6 levels of dust- proof, completely prevent dust from entering, 6 levels of waterproof, can be used in rainy days. Product parameters

Mode，moonlight， Low ，Middle,  Red light/UV 
Brightness ,Runtime,Beam distance ,Candela,Impact Resistance,Waterproof,Additional Functio
Intelligent temperature control, low voltage warning,battery power indicator, Type-C rechargeable,  Short circuit protection.
Note: The above parameters are only approximate values, Tested in a laboratory environment. The value may change with changes in the use environment. 1. Using the international patent latest generation LED, life of 50000 hours.
2. Dual light source EDC flashlight, one-key dimming.
3. Max 320 lumens brightness and 86 meters longest beam distance.
4. Built-in 300mAh lithium polymer battery support Type-C charging directly.
5. Support 1 lumen moonlight mode, with memory modefunction.
6. With low voltage warning and intelligent temperature control downshift/step-down function
7. The shell is made of aviation aluminum alloy CNC finishing, and the surface is with anodized hard oxidation treatment.
8.size:51.8mm*24.5mm*12mm
9.Net weight: 22.5g
10.The 365nm band UV light source has a wide range of uses. The 620nm band red light source with strong penetrating power, suitable for a variety of scenes.

UltraTec silicone solar lanterns offer the user a break resistant, silicone and tough ABS rechargeable light. It has a waterproof rating of IP66 and is rechargeable by Solar or USB. 

Features: 
- Lighting modes: High-Turbo-flashing-off 
- USB charge or solar charge 
- Waterproof IP66 
- Can be used as waterproof camping, emergency, storage lantern. 
- With hanging handle, suitable for mountaineering, camping, hiking and traveling 
- As a storage containers, use for survival gear, first-aid medicine, mobile phone, lighters etc
- Solar charge Input voltage (750W ) 5.5V
- Output voltage (Resistance 500ª) 5.0V
- Output current (Resistance 500ª) 10mA
- Input voltage 5.00.2V
- Charging port Micro USB port
- The Max. Luminous Flux ( Turbo Mode) 100Lm
- The Max. Luminous Flux of High Mode 50Lm
- Run time(Turbo-brightness after fully charged) 5 hours
- Run time(High-brightness after fully charged) 12 hours
- Input charging Max current 180mA
- Fully charged time by external power adapter about 5 hours

Specifications:
- Dimensions: 90mm x 90mm x 180mm
- Built-in battery 1000mAh 3.7V Lithium polymer battery
- Colour: Blue
- Weight:200g
- Material: Silicone

BATTERY OPTION:
1. Internal battery with side USB charging
2. 3x 21700 battery in magazine (no charger)
3. 3x 21700 battery in magazine (Incl TF TR-018 charger)
Features
LED OPTION
- Option1: Utilizes 8x CREE XHP70.2 LEDs (6500K) with a max output of 41,500 lumens
              Maximum beam intensity of 160,000 cd, and maximum throw distance of 800 meters
- Option2: Utilizes 8x CREE XHP70.2 LEDs (5000K) with a max output of 39,425 lumens
              Maximum beam intensity of 144,400 cd, and maximum throw distance of 760 meters
- Option3: Utilizes 8x LUMINUS SFT40 LEDs (6500K) with a max output of 20,000 lumens
              Maximum beam intensity of 360,000 cd, and maximum throw distance of 1,200  meters
Integrated precision digital optics technology provides extreme reflector performance
Utilizes dual-sided AR coated, 99% transmittance toughened glass lens
A step-down constant current circuit design with an efficiency rate up to 98%

Buil-in 10.8V / 4200mAh li-ion battery pack (made by 3x 3.6V/4200mAh 21700 battery cells) or
Power by 3x high drain 21700 batteries

Fast USB Type-C charging with discharging function available (not in 3x 21700 battery option)
Build in battery Features
1.8 hours for full charging, 1.5 hours for full charging over 90% 
Built-in intelligent adaptive charging and discharging function and protocols of QC3.0 & PD3.0
With advanced intelligent temperature regulation module, MK38 regulates its output and adapts to the ambient environment, maintaining optimal performance
Electronic reverse polarity protection and over-discharge protection
Integrated power indicator under the side switch indicates remaining battery voltage
Integrated indicator near USB-C port indicates the status of charging & powerbank discharging
Multi-switches design, clear division:
- Stainless steel side switch control the light to turn on/off and change modes etc
- Front switch on handle control 2x waterproof cooling fans to turn on/off
- Rear switch on handle control the light to turn on/off and change modes etc
User interface is simple and friendly, easy one-hand operation:
- From OFF, long press to ECO modes.
- From OFF, single press to General modes.
- Double click to Turbo from any modes (except LOCK-OUT)
- From OFF, quick triple click to Special modes (Strobe / Beacon / SOS to select)
- From OFF, quick quadrple click to lock-out the light
CNC machined from durable aircraft-grade aluminum alloy
Surface finish (option): Premium type-III hard-anodized or Micro-arc oxidation
Stainless steel strike bezel is used to break windows in an emergency situation
Triple-interface on flashlight head: Stainless steel side switch, UNC1/4" triple hole, waterproof 4PIN connector socket
Built-in UNC1/4" tripod hole, MK38 can be directly mounted to a tripod, turning it into a camp light or a fixed supplementary light
Utilizes stainless steel side switch with CD pattern surface for good touch feelings
Detachable handheld handle meets various lighting demands
Triple-sided premium cooling fins improve heat dissipation performance
Built-in double-row cooling fans on the handle to blow effectively cooling fins through outside
Convenient tail-stand capacbility
IPX-7 waterproof standard (1 meters under water)
Impact resistant to 1 meter
What's package Included?
1x Manker MK38 flashlight (built-in battery pack or 3x 21700 as per top selection)
1x Detachable handle
1x USB Type-C cable (build in battery option)
1x Super charging adapter (Plug option: European) (build in battery option)
1x Quick release screw
1x Stainless steel tag tool
1x Lanyard
1x User manual Technical Data
MK38 with 8x CREE XHP70.2 LEDs 6500K:
Modes/Level                                                           Luminance             Runtime
Turbo mode - Turbo level (Thermal regulation):        41,500 lumens        1 hours 30 minutes
General mode - High level (Thermal regulation):       20,000 lumens        1 hours 40 minutes
General mode - Mid3 level (Thermal regulation):       10,000 lumens        1 hours 50 minutes
General mode - Mid2 level:                                     5,000 lumens        2 hours 20 minutes
General mode - Mid1 level:                                     2,200 lumens        5 hours
General mode - Low level:                                      1,000 lumens       10 hours
ECO mode - L4 level:                                                400 lumens       20 hours
ECO mode - L3 level:                                                180 lumens       28 hours
ECO mode - L2 level:                                                 80 lumens        50 hours
ECO mode - L1 level:                                                 40 lumens        66 hours
Special mode - Strobe:                                        25,000 lumens         -
Maximum light intensity: 160,000 cd
Maximum beam distance: 800 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
MK38 with 8x CREE XHP70.2 LEDs 5000K:
Modes/Level                                                            Luminance               Runtime
Turbo mode - Turbo (Thermal regulation):                39,425 lumens          1 hours 30 minutes
General mode - High level (Thermal regulation):       19,000 lumens          1 hours 40 minutes
General mode - Mid3 level (Thermal regulation):         9,500 lumens          1 hours 50 minutes
General mode - Mid2 level:                                      4,600 lumens          2 hours 20 minutes
General mode - Mid1 level:                                      2,090 lumens          5 hours
General mode - Low level:                                          950 lumens        10 hours
ECO mode - L4 level:                                                 400 lumens        20 hours
ECO mode - L3 level:                                                 180 lumens        28 hours
ECO mode - L2 level:                                                   80 lumens        50 hours
ECO mode - L1 level:                                                   40 lumens        66 hours
Special mode - Strobe:                                          23,750 lumens          -
Maximum light intensity: 144,400 cd
Maximum beam distance: 760 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
MK38 with 8x LUMINUS SFT40 LEDs 6500K:
Modes/Level                                                               Luminance          Runtime
Turbo mode - Turbo (Thermal regulation):                 20,000 lumens         2 hours
General mode - High level (Thermal regulation):        10,000 lumens         2 hours 15 minutes
General mode - Mid3 level (Thermal regulation):          5,000 lumens         2 hours 30 minutes
General mode - Mid2 level:                                       2,500 lumens         3 hours
General mode - Mid1 level:                                       1,300 lumens         6 hours
General mode - Low level:                                           650 lumens       12 hours
ECO mode - L4 level:                                                  320 lumens       22 hours
ECO mode - L3 level:                                                  160 lumens       33 hours
ECO mode - L2 level:                                                    80 lumens       50 hours
ECO mode - L1 level:                                                    40 lumens       66 hours
Special mode - Strobe:                                           12,000 lumens         -
Maximum light intensity: 360,000 cd
Maximum beam distance: 1,200 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
More information, please check the table on the photo as belows:
(* Note: You can open this photo in new tab on your Google chrome to enlarge.). Note: The front switch on the handle can turn on/off the cooling fans. The stailess steel side swtich on flashlight head and the rear switch on the handle can control flashlight ON/OFF, mode operation etc.
Cooling Fan Operation
ON/OFF: In any state (except LOCK-OUT), single click the front switch on the handle to turn on 2x cooling fans. A single click after this turns the fans OFF.
△ Note: When the light is ON, Single click side switch (or rear switch) also to turn off the cooling fans.
Mode Operation
ON/OFF: When the light is OFF, any click the side switch (or the rear switch) to turn the light ON. When the light is ON, just single click the side switch (or the rear switch) to turn the light OFF.
ECO Modes: From OFF, simple press and hold down the side switch (or the rear switch) to activate ECO modes. press and hold down the side switch (or the rear switch) again after this activates. the light cycle through "L1->L2->L3->L4" (or "L4->L3->L2->L1"). When the light cycle to the last level "L4" (or "L1"), the light will stop to cycle and stay at last level. If you want to select one level you need, just release the side switch (or the rear switch) while the light cycling. If you press and hold down the side switch (or the rear switch) again, the light will be cycled through opposite direction.
△ Note: After activate ECO modes, single click to turn OFF the light; double click to activate Turbo mode; quickly triple click to activate Special modes.
General modes: Single click the side switch (or the rear switch) to activate General modes. Press and hold down the side switch (or the rear switch) agin after this activates. the light cycle through "Low->Mid1-Mid2 ->Mid3->High" (or "High->Mid3->Mid2->Mid1->Low"). When the light cycle to the last level "High" (or "Low"), the light will stop to cycle and stay at last level. If you want to select one level you need, just release the side switch (or the rear switch) while the light cycling. If you press and hold on the side switch (or the rear switch) again, the light will be cylced through opposite direction.
△ Note: After activate general modes, single click to turn OFF the light; Double click to activate Turbo mode; Quickly triple click to activate Special modes.
Turbo mode: Double click the side switch (or the rear switch) to activate Turbo from any other modes (except LOCK-OUT).
△ Note: After activate Turbo mode, single click to turn OFF the light; double click or long press to activate General modes; quickly triple click to activate Special modes.
Special modes: From OFF, quickly triple click the side switch (or the rear switch) to activate strobe. From strobe, press and hold down to cycle through the other safety modes; Beacon > SOS > back to strobe.
△ Note: After activate Special modes, single click to turn OFF the light; double click to activate Turbo mode; quickly triple click to activate General modes.
Breathing light mode: From OFF, click and hold for 3 seconds and release. LED indicator under the side switch will start to breath. There is nothing particular about this except that it is a cool mood light. Click once to turn off.
△ Note: While holding down the side switch (or the rear switch) for 3 seconds, MK38 will activate one level of ECO modes and turn off automatically, and then LED indicator under the side switch will turn on. 
LOCK-OUT / UNLOCK: Locking out the light when not in use is highly recommended. From OFF, quickly quadruple click (simply click 4 times fast) to LOCK-OUT. The light will then a blink to indicate that it has been LOCKED. To UNLOCK, quickly quadruple click (simply click 4 times fast) again, the light will turn on to indicate it has been unlocked.
Memory function: From OFF, single click (or long press) the side switch (or the rear switch) to activate the light level at General modes (or ECO modes) last used.Battery pack charging:
1. Please switch off the light and plug the USB Type-C charging cable into the included standard adapter, then connect another USB Type-C socket of the charging cable to the light.
2. MK38 have intelligent identified charging function. When battery pack charging, the indicator near USB-C port will be red constant ON, the indicator will be OFF after battery pack charging is completed.
3. Be sure to close the anti-dust USB cover once battery pack charing is completed.
Power bank function:
1. Please switch off the light and connect the USB Type-C socket of the included charing cable to the light, then connect another USB Type-C socket of the charging cable to the digital device with a USB type-C charging port.
2. MK38 have intelligent identified discharging function. When battery pack discharging as power bank, the indicator will be red constant-ON.
3. Be sure to close the anti-dust USB cover once the battery pack discharging is completed.* Note:  
A. You can turn the light ON / OFF and operate all modes when charging & discharging.
B. Battery pack can be full charged in approximately 1.8 hours with the included standard adapter and USB Type-C charging cable.
C. Recharge a stored every four months to maintain optimum performance of the battery.
D. When Connecting to the power bank with the same PD protocol, It might fail to be charged if the protocols are not compatible with the device. For example, Power bank is charging to MK38, or MK38 is charging to the power bank.
E. As a power bank, MK38 can charge only one digital device at a time. Please DO NOT use it to charge a digital device through any multi-port USB hub or charge two or more digital devices at the same time.
Battery Voltage Indicator
When the light is turned on, the built-in power indicator under the stainless steel side switch will show different color light to indicate remaining battery voltage:While battery voltage > 10.2V, blue light turn on and last 3s.
While battery voltage 9.6V-10.2V, purple light turn on and last 3s.
While battery voltage 8.7V-9.6V, red light constant-on.
While battery voltage < 8.7V, the light turn off authomatically.
* Low voltage warning
When the battery voltage level drops below the present level, the light is programmed to downshift to a lower brightness level until lowest output is reached. When the battery voltage level still drops low under lowest output, it will shut off authomatically.
Intelligent Overheat Protection
Advanced intelligent temperature regulation technology allows MK38 to dynamically adjust output performance according to its body temperature.The light will accumulate a lot of heat when you use it at high-output levels for extended periods. When the light reaches the temperature of 65°C or above, the light will automatically step down its output to reduce the temperature. at the same time we also make more premium cooling fins on flashlight head and built-in duable-row fans to blow effectively these cooling fins through the outside to protect flashlight overheat.
* Note: DO NOT submerge the flashlight into any liquid when it is hot. Doing so may cause irrepareable damage to the light due to the difference of air pressure inside and outside of tube.Note: We also high recommend the oridinary users to purhcase Samsung 40T unprotected flat-top 21700 batteries or Modell P42A unprotected flat-top 21700 batteries to drive MK38.
Battery Installation
1. Loose the tailcap counterclockwise and take it away.
2. As shown in the graph, insert batteries with the positive (+) to connect the glod plated copper positive round conductive plate on tailcap PCB, the nagative (-) to connect the glod plated copper spring on PCB.
3. Tighten the tailcap by aligning the two metal pins on the tailcap with the corresponding holes on the flashlight body, and rotate clockwise.
* Warning: 1. DO NOT mix rechargeable and non-rechargeable batteries
                 2. DO NOT mix batteries of different types/brands
                 3. DO NOT mix batteries of different power levels
                 4. DO NOT mix old and new batteries Battery Voltage Indicator
When the light is turned on, the built-in power indicator under the stainless steel side switch will show different color light to indicate remaining battery voltage: While battery voltage > 10.2V, blue light turn on and last 3s.
While battery voltage 9.6V-10.2V, purple light turn on and last 3s.
While battery voltage 8.7V-9.6V, red light constant-on.
While battery voltage < 8.7V, the light turn off authomatically.
* Low voltage warning
When the battery voltage level drops below the present level, the light is programmed to downshift to a lower brightness level until lowest output is reached. When the battery voltage level still drops low under lowest output, it will shut off authomatically.
Intelligent Overheat Protection
Advanced intelligent temperature regulation technology allows MK38 to dynamically adjust output performance according to its body temperature.The light will accumulate a lot of heat when you use it at high-output levels for extended periods. When the light reaches the temperature of 65°C or above, the light will automatically step down its output to reduce the temperature. at the same time we also make more premium cooling fins on flashlight head and built-in duable-row fans to blow effectively these cooling fins through the outside to protect flashlight overheat.
* Note: DO NOT submerge the flashlight into any liquid when it is hot. Doing so may cause irrepareable damage to the light due to the difference of air pressure inside and outside of tube.How to disassemble the handle?
1.Switch off flashlight and use tag tool (included accessory) to press the quick release screw on the counterbored hole, loose the screw counterclockwise, and then twist out the screw with your hand.
2.Lift up the handle, 4PIN connectors on the handle will take off from the connector socket on flashlight head. then you can place the handle to somewhere.
3. Please insert quick release screw into the connector socket and tighten it. At last please use tage tool (included acccessory) to press the screw to tighten it fully to get a waterproof, and then you can switch on flashlight as usual.
How to install the handle?
1.Switch off flashlight and use tag tool (included accessory) to press the quick release screw on the connector socket, loose the screw counterclockwise, and then twist out the screw with your hand.
2.Lift up the handle, make sure the the counterbored hole align the screw hole on flashlight body and 4PIN connectors on the handle will also align the connector socket on flashlight head.
3.Put the screw through the counterbored hole and make the screw tip into the screw hole on flashlight body, and then take tag tool (included accessory) to press the screw to tighen.
Warning
1. The flashlight is locked out default by us. Please quickly four-click to unlock it for the first use.
2. The flashlight is high-intensity lighting device capable of causing eye damage or other harms, so please avoid shining the light directly into anyone's eyes. 3. The flashlight is recommended use for adult or under adult supervision. Please keep this flashlight away from children.
4. Please take off the dustproof filme from lens immediately for the first use.
5. This flashlight is capable of emitting intense heat when turning on for a long period of time. Remember to install the handle before using. Avoid touching the appearance of the flashlight.
6. DO NOT shine a object at close range, cover the flashlight, or place the head to face down when it is turn on. The heat bilt-up may objects to burn or even result in unexpected disasters.
7. After the cooling fans ON, DO NOT push your fingers into fans and force them to stop working as it will demage the fans.
8. DO NOT immerse the flashlight in seawater or other correosive media as it will damage the flashlight.
9. Please turn the flashlight off and make sure that its lock out if it is left unused, carried or transproted. The heat built-up due to accidental activation may melt the lens of the flashlight, cause close objects to urn, or even result in unexpected disasters.
10. The built-in battery pack is charged to approximately 50% by default and will not support maximum output and maximum runtime.
11. To maintain waterproof rating, please lubricate the o-ring with silicone safe lubricant and replace worn o-rings as needed.
12. Please recharge the product every 4 months when left unused for a prolonged time.
13. DO NOT disassemble or modify this product which can cause damage and will void the warranty.
14. When battery pack are full charged, led indicator will turn OFF. at the same time please don't forget to take off USB Type-C charging cable and close the anti-dust USB cover immediately.
15. After uninstall the handle, please put the quick release screw into the connector socket on the flashlight head and tighten it to get a better waterproof.
16.After discharge as power bank is complete, please don't forget to close the anti-dust USB cover immediately

BATTERY OPTION:
1. Internal battery with side USB charging
2. 3x 21700 battery in magazine (no charger)
3. 3x 21700 battery in magazine (Incl TF TR-018 charger)
Features
LED OPTION
- Option1: Utilizes 8x CREE XHP70.2 LEDs (6500K) with a max output of 41,500 lumens
              Maximum beam intensity of 160,000 cd, and maximum throw distance of 800 meters
- Option2: Utilizes 8x CREE XHP70.2 LEDs (5000K) with a max output of 39,425 lumens
              Maximum beam intensity of 144,400 cd, and maximum throw distance of 760 meters
- Option3: Utilizes 8x LUMINUS SFT40 LEDs (6500K) with a max output of 20,000 lumens
              Maximum beam intensity of 360,000 cd, and maximum throw distance of 1,200  meters
Integrated precision digital optics technology provides extreme reflector performance
Utilizes dual-sided AR coated, 99% transmittance toughened glass lens
A step-down constant current circuit design with an efficiency rate up to 98%

Buil-in 10.8V / 4200mAh li-ion battery pack (made by 3x 3.6V/4200mAh 21700 battery cells) or
Power by 3x high drain 21700 batteries

Fast USB Type-C charging with discharging function available (not in 3x 21700 battery option)
Build in battery Features
1.8 hours for full charging, 1.5 hours for full charging over 90% 
Built-in intelligent adaptive charging and discharging function and protocols of QC3.0 & PD3.0
With advanced intelligent temperature regulation module, MK38 regulates its output and adapts to the ambient environment, maintaining optimal performance
Electronic reverse polarity protection and over-discharge protection
Integrated power indicator under the side switch indicates remaining battery voltage
Integrated indicator near USB-C port indicates the status of charging & powerbank discharging
Multi-switches design, clear division:
- Stainless steel side switch control the light to turn on/off and change modes etc
- Front switch on handle control 2x waterproof cooling fans to turn on/off
- Rear switch on handle control the light to turn on/off and change modes etc
User interface is simple and friendly, easy one-hand operation:
- From OFF, long press to ECO modes.
- From OFF, single press to General modes.
- Double click to Turbo from any modes (except LOCK-OUT)
- From OFF, quick triple click to Special modes (Strobe / Beacon / SOS to select)
- From OFF, quick quadrple click to lock-out the light
CNC machined from durable aircraft-grade aluminum alloy
Surface finish (option): Premium type-III hard-anodized or Micro-arc oxidation
Stainless steel strike bezel is used to break windows in an emergency situation
Triple-interface on flashlight head: Stainless steel side switch, UNC1/4" triple hole, waterproof 4PIN connector socket
Built-in UNC1/4" tripod hole, MK38 can be directly mounted to a tripod, turning it into a camp light or a fixed supplementary light
Utilizes stainless steel side switch with CD pattern surface for good touch feelings
Detachable handheld handle meets various lighting demands
Triple-sided premium cooling fins improve heat dissipation performance
Built-in double-row cooling fans on the handle to blow effectively cooling fins through outside
Convenient tail-stand capacbility
IPX-7 waterproof standard (1 meters under water)
Impact resistant to 1 meter
What's package Included?
1x Manker MK38 flashlight (built-in battery pack or 3x 21700 as per top selection)
1x Detachable handle
1x USB Type-C cable (build in battery option)
1x Super charging adapter (Plug option: European) (build in battery option)
1x Quick release screw
1x Stainless steel tag tool
1x Lanyard
1x User manual Technical Data
MK38 with 8x CREE XHP70.2 LEDs 6500K:
Modes/Level                                                           Luminance             Runtime
Turbo mode - Turbo level (Thermal regulation):        41,500 lumens        1 hours 30 minutes
General mode - High level (Thermal regulation):       20,000 lumens        1 hours 40 minutes
General mode - Mid3 level (Thermal regulation):       10,000 lumens        1 hours 50 minutes
General mode - Mid2 level:                                     5,000 lumens        2 hours 20 minutes
General mode - Mid1 level:                                     2,200 lumens        5 hours
General mode - Low level:                                      1,000 lumens       10 hours
ECO mode - L4 level:                                                400 lumens       20 hours
ECO mode - L3 level:                                                180 lumens       28 hours
ECO mode - L2 level:                                                 80 lumens        50 hours
ECO mode - L1 level:                                                 40 lumens        66 hours
Special mode - Strobe:                                        25,000 lumens         -
Maximum light intensity: 160,000 cd
Maximum beam distance: 800 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
MK38 with 8x CREE XHP70.2 LEDs 5000K:
Modes/Level                                                            Luminance               Runtime
Turbo mode - Turbo (Thermal regulation):                39,425 lumens          1 hours 30 minutes
General mode - High level (Thermal regulation):       19,000 lumens          1 hours 40 minutes
General mode - Mid3 level (Thermal regulation):         9,500 lumens          1 hours 50 minutes
General mode - Mid2 level:                                      4,600 lumens          2 hours 20 minutes
General mode - Mid1 level:                                      2,090 lumens          5 hours
General mode - Low level:                                          950 lumens        10 hours
ECO mode - L4 level:                                                 400 lumens        20 hours
ECO mode - L3 level:                                                 180 lumens        28 hours
ECO mode - L2 level:                                                   80 lumens        50 hours
ECO mode - L1 level:                                                   40 lumens        66 hours
Special mode - Strobe:                                          23,750 lumens          -
Maximum light intensity: 144,400 cd
Maximum beam distance: 760 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
MK38 with 8x LUMINUS SFT40 LEDs 6500K:
Modes/Level                                                               Luminance          Runtime
Turbo mode - Turbo (Thermal regulation):                 20,000 lumens         2 hours
General mode - High level (Thermal regulation):        10,000 lumens         2 hours 15 minutes
General mode - Mid3 level (Thermal regulation):          5,000 lumens         2 hours 30 minutes
General mode - Mid2 level:                                       2,500 lumens         3 hours
General mode - Mid1 level:                                       1,300 lumens         6 hours
General mode - Low level:                                           650 lumens       12 hours
ECO mode - L4 level:                                                  320 lumens       22 hours
ECO mode - L3 level:                                                  160 lumens       33 hours
ECO mode - L2 level:                                                    80 lumens       50 hours
ECO mode - L1 level:                                                    40 lumens       66 hours
Special mode - Strobe:                                           12,000 lumens         -
Maximum light intensity: 360,000 cd
Maximum beam distance: 1,200 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
More information, please check the table on the photo as belows:
(* Note: You can open this photo in new tab on your Google chrome to enlarge.). Note: The front switch on the handle can turn on/off the cooling fans. The stailess steel side swtich on flashlight head and the rear switch on the handle can control flashlight ON/OFF, mode operation etc.
Cooling Fan Operation
ON/OFF: In any state (except LOCK-OUT), single click the front switch on the handle to turn on 2x cooling fans. A single click after this turns the fans OFF.
△ Note: When the light is ON, Single click side switch (or rear switch) also to turn off the cooling fans.
Mode Operation
ON/OFF: When the light is OFF, any click the side switch (or the rear switch) to turn the light ON. When the light is ON, just single click the side switch (or the rear switch) to turn the light OFF.
ECO Modes: From OFF, simple press and hold down the side switch (or the rear switch) to activate ECO modes. press and hold down the side switch (or the rear switch) again after this activates. the light cycle through "L1->L2->L3->L4" (or "L4->L3->L2->L1"). When the light cycle to the last level "L4" (or "L1"), the light will stop to cycle and stay at last level. If you want to select one level you need, just release the side switch (or the rear switch) while the light cycling. If you press and hold down the side switch (or the rear switch) again, the light will be cycled through opposite direction.
△ Note: After activate ECO modes, single click to turn OFF the light; double click to activate Turbo mode; quickly triple click to activate Special modes.
General modes: Single click the side switch (or the rear switch) to activate General modes. Press and hold down the side switch (or the rear switch) agin after this activates. the light cycle through "Low->Mid1-Mid2 ->Mid3->High" (or "High->Mid3->Mid2->Mid1->Low"). When the light cycle to the last level "High" (or "Low"), the light will stop to cycle and stay at last level. If you want to select one level you need, just release the side switch (or the rear switch) while the light cycling. If you press and hold on the side switch (or the rear switch) again, the light will be cylced through opposite direction.
△ Note: After activate general modes, single click to turn OFF the light; Double click to activate Turbo mode; Quickly triple click to activate Special modes.
Turbo mode: Double click the side switch (or the rear switch) to activate Turbo from any other modes (except LOCK-OUT).
△ Note: After activate Turbo mode, single click to turn OFF the light; double click or long press to activate General modes; quickly triple click to activate Special modes.
Special modes: From OFF, quickly triple click the side switch (or the rear switch) to activate strobe. From strobe, press and hold down to cycle through the other safety modes; Beacon > SOS > back to strobe.
△ Note: After activate Special modes, single click to turn OFF the light; double click to activate Turbo mode; quickly triple click to activate General modes.
Breathing light mode: From OFF, click and hold for 3 seconds and release. LED indicator under the side switch will start to breath. There is nothing particular about this except that it is a cool mood light. Click once to turn off.
△ Note: While holding down the side switch (or the rear switch) for 3 seconds, MK38 will activate one level of ECO modes and turn off automatically, and then LED indicator under the side switch will turn on. 
LOCK-OUT / UNLOCK: Locking out the light when not in use is highly recommended. From OFF, quickly quadruple click (simply click 4 times fast) to LOCK-OUT. The light will then a blink to indicate that it has been LOCKED. To UNLOCK, quickly quadruple click (simply click 4 times fast) again, the light will turn on to indicate it has been unlocked.
Memory function: From OFF, single click (or long press) the side switch (or the rear switch) to activate the light level at General modes (or ECO modes) last used.Battery pack charging:
1. Please switch off the light and plug the USB Type-C charging cable into the included standard adapter, then connect another USB Type-C socket of the charging cable to the light.
2. MK38 have intelligent identified charging function. When battery pack charging, the indicator near USB-C port will be red constant ON, the indicator will be OFF after battery pack charging is completed.
3. Be sure to close the anti-dust USB cover once battery pack charing is completed.
Power bank function:
1. Please switch off the light and connect the USB Type-C socket of the included charing cable to the light, then connect another USB Type-C socket of the charging cable to the digital device with a USB type-C charging port.
2. MK38 have intelligent identified discharging function. When battery pack discharging as power bank, the indicator will be red constant-ON.
3. Be sure to close the anti-dust USB cover once the battery pack discharging is completed.* Note:  
A. You can turn the light ON / OFF and operate all modes when charging & discharging.
B. Battery pack can be full charged in approximately 1.8 hours with the included standard adapter and USB Type-C charging cable.
C. Recharge a stored every four months to maintain optimum performance of the battery.
D. When Connecting to the power bank with the same PD protocol, It might fail to be charged if the protocols are not compatible with the device. For example, Power bank is charging to MK38, or MK38 is charging to the power bank.
E. As a power bank, MK38 can charge only one digital device at a time. Please DO NOT use it to charge a digital device through any multi-port USB hub or charge two or more digital devices at the same time.
Battery Voltage Indicator
When the light is turned on, the built-in power indicator under the stainless steel side switch will show different color light to indicate remaining battery voltage:While battery voltage > 10.2V, blue light turn on and last 3s.
While battery voltage 9.6V-10.2V, purple light turn on and last 3s.
While battery voltage 8.7V-9.6V, red light constant-on.
While battery voltage < 8.7V, the light turn off authomatically.
* Low voltage warning
When the battery voltage level drops below the present level, the light is programmed to downshift to a lower brightness level until lowest output is reached. When the battery voltage level still drops low under lowest output, it will shut off authomatically.
Intelligent Overheat Protection
Advanced intelligent temperature regulation technology allows MK38 to dynamically adjust output performance according to its body temperature.The light will accumulate a lot of heat when you use it at high-output levels for extended periods. When the light reaches the temperature of 65°C or above, the light will automatically step down its output to reduce the temperature. at the same time we also make more premium cooling fins on flashlight head and built-in duable-row fans to blow effectively these cooling fins through the outside to protect flashlight overheat.
* Note: DO NOT submerge the flashlight into any liquid when it is hot. Doing so may cause irrepareable damage to the light due to the difference of air pressure inside and outside of tube.Note: We also high recommend the oridinary users to purhcase Samsung 40T unprotected flat-top 21700 batteries or Modell P42A unprotected flat-top 21700 batteries to drive MK38.
Battery Installation
1. Loose the tailcap counterclockwise and take it away.
2. As shown in the graph, insert batteries with the positive (+) to connect the glod plated copper positive round conductive plate on tailcap PCB, the nagative (-) to connect the glod plated copper spring on PCB.
3. Tighten the tailcap by aligning the two metal pins on the tailcap with the corresponding holes on the flashlight body, and rotate clockwise.
* Warning: 1. DO NOT mix rechargeable and non-rechargeable batteries
                 2. DO NOT mix batteries of different types/brands
                 3. DO NOT mix batteries of different power levels
                 4. DO NOT mix old and new batteries Battery Voltage Indicator
When the light is turned on, the built-in power indicator under the stainless steel side switch will show different color light to indicate remaining battery voltage: While battery voltage > 10.2V, blue light turn on and last 3s.
While battery voltage 9.6V-10.2V, purple light turn on and last 3s.
While battery voltage 8.7V-9.6V, red light constant-on.
While battery voltage < 8.7V, the light turn off authomatically.
* Low voltage warning
When the battery voltage level drops below the present level, the light is programmed to downshift to a lower brightness level until lowest output is reached. When the battery voltage level still drops low under lowest output, it will shut off authomatically.
Intelligent Overheat Protection
Advanced intelligent temperature regulation technology allows MK38 to dynamically adjust output performance according to its body temperature.The light will accumulate a lot of heat when you use it at high-output levels for extended periods. When the light reaches the temperature of 65°C or above, the light will automatically step down its output to reduce the temperature. at the same time we also make more premium cooling fins on flashlight head and built-in duable-row fans to blow effectively these cooling fins through the outside to protect flashlight overheat.
* Note: DO NOT submerge the flashlight into any liquid when it is hot. Doing so may cause irrepareable damage to the light due to the difference of air pressure inside and outside of tube.How to disassemble the handle?
1.Switch off flashlight and use tag tool (included accessory) to press the quick release screw on the counterbored hole, loose the screw counterclockwise, and then twist out the screw with your hand.
2.Lift up the handle, 4PIN connectors on the handle will take off from the connector socket on flashlight head. then you can place the handle to somewhere.
3. Please insert quick release screw into the connector socket and tighten it. At last please use tage tool (included acccessory) to press the screw to tighten it fully to get a waterproof, and then you can switch on flashlight as usual.
How to install the handle?
1.Switch off flashlight and use tag tool (included accessory) to press the quick release screw on the connector socket, loose the screw counterclockwise, and then twist out the screw with your hand.
2.Lift up the handle, make sure the the counterbored hole align the screw hole on flashlight body and 4PIN connectors on the handle will also align the connector socket on flashlight head.
3.Put the screw through the counterbored hole and make the screw tip into the screw hole on flashlight body, and then take tag tool (included accessory) to press the screw to tighen.
Warning
1. The flashlight is locked out default by us. Please quickly four-click to unlock it for the first use.
2. The flashlight is high-intensity lighting device capable of causing eye damage or other harms, so please avoid shining the light directly into anyone's eyes. 3. The flashlight is recommended use for adult or under adult supervision. Please keep this flashlight away from children.
4. Please take off the dustproof filme from lens immediately for the first use.
5. This flashlight is capable of emitting intense heat when turning on for a long period of time. Remember to install the handle before using. Avoid touching the appearance of the flashlight.
6. DO NOT shine a object at close range, cover the flashlight, or place the head to face down when it is turn on. The heat bilt-up may objects to burn or even result in unexpected disasters.
7. After the cooling fans ON, DO NOT push your fingers into fans and force them to stop working as it will demage the fans.
8. DO NOT immerse the flashlight in seawater or other correosive media as it will damage the flashlight.
9. Please turn the flashlight off and make sure that its lock out if it is left unused, carried or transproted. The heat built-up due to accidental activation may melt the lens of the flashlight, cause close objects to urn, or even result in unexpected disasters.
10. The built-in battery pack is charged to approximately 50% by default and will not support maximum output and maximum runtime.
11. To maintain waterproof rating, please lubricate the o-ring with silicone safe lubricant and replace worn o-rings as needed.
12. Please recharge the product every 4 months when left unused for a prolonged time.
13. DO NOT disassemble or modify this product which can cause damage and will void the warranty.
14. When battery pack are full charged, led indicator will turn OFF. at the same time please don't forget to take off USB Type-C charging cable and close the anti-dust USB cover immediately.
15. After uninstall the handle, please put the quick release screw into the connector socket on the flashlight head and tighten it to get a better waterproof.
16.After discharge as power bank is complete, please don't forget to close the anti-dust USB cover immediately

Trustfire MINIX white + red / UV light multi-purpose key light
Max lumens 320LM Max Beam distance  86m Dual light source design, one light for multiple uses

Available in four colors, each light is paired with two light sources, white + red light or white + UV light.

Cool black (white + red light), diamond blue (white + red light), the ultimate gray (white + UV light), luxury purple (white + UV light) Red light source, long range, strong penetration

MINI X uses 620nm wavelength red light source, strong penetration, suitable for warning lighting, early warning emergency, signal distress, and the effect of mosquito repellent. Warning lighting, early warning and emergency

Walk alone in the dark, turn on the red light mode, play a warning lighting, early warning emergency, etc., 620nm has a strong penetrating power, can be quickly discovered by teammates.
Wilderness survival necessary signal distress light Wilderness survival necessary signal distress light

In case of danger, turn on the MINI X red flashing mode in time to send SOS distress signal; MINI X with 3.7V 300mAh lithium polymer battery, red flashing up to 9 hours, the necessary flashlight for wilderness survival. Camping in the wild. Red light repels mosquitoes

When camping in the wild, the MINI X's red light also has a mosquito-repelling effect, repelling mosquitoes from the tent and keeping them away from bites.

Too many mosquitoes, can't sleep at all

MINI X's red light repels mosquitoes, so you can sleep through the night. MIN X uses 365nm wavelength UV light source

UV light is also called UV light source, UV light wavelength range in 200-400nm, 365nm wavelength belongs to the long-wave UV.

Bacteria detection

365nm is widely used to detect ringworm, acne, ringworm of the head, ringworm of white, ringworm of flowers, ringworm of red, ringworm of axillary hair; certain pigmented lesions such as chloasma, age spots, coffee spots, etc., as well as neurofibroma, skin tumors, vitiligo, etc. All are commonly used in dermatology.

Fluorescent agent detection

365nm ultraviolet light, in clean objects, irradiation shows white, only in the object fluorescent agent, shows blue; many products in life and fluorescent agent, are harmful to the human body, we can detect through MINI X, for example: diapers, saliva wipes, shoes, clothing, paper towels, toys, blankets, masks, lotions, nail polish, laundry detergent, face wash, sanitary napkins. etc. can be tested for the presence of fluorescent agents. Banknote inspection

365nm ultraviolet light can also detect the authenticity of banknotes; when collecting money and making change, shine a light at any time to avoid receiving counterfeit money.
Animal skin testing & Bathroom bacteria detection
Diaper fluorescent agent detection
& Mask fluorescence agent detection YPE-C fast charging

Charging instructions.
1. Turn off the flashlight, remove the waterproof cap on the side of the flashlight, and insert the Type-C interface of the charging cable into the charging socket of the flashlight.
2. When the flashlight receives a charging signal, the charging indicator will light up in red, and turn to green when the flashlight is fully charged.
3. After charging operation, you should unplug the charging cable and press the waterproof cover back tightly to ensure the waterproof performance of the flashlight, and then you can use the flashlight normally.   One-button operation

Single button independent control, can control the flashlight switch, white light intensity regulation, can switch to red light / UV light, red light / UV light flashing, also can lock the flashlight switch to prevent accidental touch.

Long press the switch for 0.5s to turn on/off the flashlight

Change modes

White light mode: click the switch to switch modes in sequence of moonlight mode → low mode → middle mode → high mode.
Red light mode and purple light mode: click the switch to switch modes in sequence of red light mode/purple light mode → red flashing/purple flashing.
◎ Memory Mode
When the flashlight is in any mode under white light mode, it will automatically memorize the current working mode. After it is turned off, it will start to work in the current memory mode.
Lock: When the flashlight is turned off, double click the switch quickly to enter lock mode, the flashlight will flash twice and then enter lock mode.
Lock: When the flashlight is turned off, double click the switch quickly to enter lock mode, the flashlight will flash twice and then enter lock mode. Power indicator
When the flashlight is turned off, please touch the top switch and you will see the power indicator lights up and go out automatically after 2 seconds. Different colors show different remaining battery power, the corresponding relationship is as follows:

Green: 80%-100% Yellow: 20%-80% Red: 5%-20% Red flashing: 1%-5% IP66 level of protection
Up to 6 levels of dust- proof, completely prevent dust from entering, 6 levels of waterproof, can be used in rainy days. Product parameters

Mode，moonlight， Low ，Middle,  Red light/UV 
Brightness ,Runtime,Beam distance ,Candela,Impact Resistance,Waterproof,Additional Functio
Intelligent temperature control, low voltage warning,battery power indicator, Type-C rechargeable,  Short circuit protection.
Note: The above parameters are only approximate values, Tested in a laboratory environment. The value may change with changes in the use environment. 1. Using the international patent latest generation LED, life of 50000 hours.
2. Dual light source EDC flashlight, one-key dimming.
3. Max 320 lumens brightness and 86 meters longest beam distance.
4. Built-in 300mAh lithium polymer battery support Type-C charging directly.
5. Support 1 lumen moonlight mode, with memory modefunction.
6. With low voltage warning and intelligent temperature control downshift/step-down function
7. The shell is made of aviation aluminum alloy CNC finishing, and the surface is with anodized hard oxidation treatment.
8.size:51.8mm*24.5mm*12mm
9.Net weight: 22.5g
10.The 365nm band UV light source has a wide range of uses. The 620nm band red light source with strong penetrating power, suitable for a variety of scenes.

Trustfire MINIX white + red / UV light multi-purpose key light
Max lumens 320LM Max Beam distance  86m Dual light source design, one light for multiple uses

Available in four colors, each light is paired with two light sources, white + red light or white + UV light.

Cool black (white + red light), diamond blue (white + red light), the ultimate gray (white + UV light), luxury purple (white + UV light) Red light source, long range, strong penetration

MINI X uses 620nm wavelength red light source, strong penetration, suitable for warning lighting, early warning emergency, signal distress, and the effect of mosquito repellent. Warning lighting, early warning and emergency

Walk alone in the dark, turn on the red light mode, play a warning lighting, early warning emergency, etc., 620nm has a strong penetrating power, can be quickly discovered by teammates.
Wilderness survival necessary signal distress light Wilderness survival necessary signal distress light

In case of danger, turn on the MINI X red flashing mode in time to send SOS distress signal; MINI X with 3.7V 300mAh lithium polymer battery, red flashing up to 9 hours, the necessary flashlight for wilderness survival. Camping in the wild. Red light repels mosquitoes

When camping in the wild, the MINI X's red light also has a mosquito-repelling effect, repelling mosquitoes from the tent and keeping them away from bites.

Too many mosquitoes, can't sleep at all

MINI X's red light repels mosquitoes, so you can sleep through the night. MIN X uses 365nm wavelength UV light source

UV light is also called UV light source, UV light wavelength range in 200-400nm, 365nm wavelength belongs to the long-wave UV.

Bacteria detection

365nm is widely used to detect ringworm, acne, ringworm of the head, ringworm of white, ringworm of flowers, ringworm of red, ringworm of axillary hair; certain pigmented lesions such as chloasma, age spots, coffee spots, etc., as well as neurofibroma, skin tumors, vitiligo, etc. All are commonly used in dermatology.

Fluorescent agent detection

365nm ultraviolet light, in clean objects, irradiation shows white, only in the object fluorescent agent, shows blue; many products in life and fluorescent agent, are harmful to the human body, we can detect through MINI X, for example: diapers, saliva wipes, shoes, clothing, paper towels, toys, blankets, masks, lotions, nail polish, laundry detergent, face wash, sanitary napkins. etc. can be tested for the presence of fluorescent agents. Banknote inspection

365nm ultraviolet light can also detect the authenticity of banknotes; when collecting money and making change, shine a light at any time to avoid receiving counterfeit money.
Animal skin testing & Bathroom bacteria detection
Diaper fluorescent agent detection
& Mask fluorescence agent detection YPE-C fast charging

Charging instructions.
1. Turn off the flashlight, remove the waterproof cap on the side of the flashlight, and insert the Type-C interface of the charging cable into the charging socket of the flashlight.
2. When the flashlight receives a charging signal, the charging indicator will light up in red, and turn to green when the flashlight is fully charged.
3. After charging operation, you should unplug the charging cable and press the waterproof cover back tightly to ensure the waterproof performance of the flashlight, and then you can use the flashlight normally.   One-button operation

Single button independent control, can control the flashlight switch, white light intensity regulation, can switch to red light / UV light, red light / UV light flashing, also can lock the flashlight switch to prevent accidental touch.

Long press the switch for 0.5s to turn on/off the flashlight

Change modes

White light mode: click the switch to switch modes in sequence of moonlight mode → low mode → middle mode → high mode.
Red light mode and purple light mode: click the switch to switch modes in sequence of red light mode/purple light mode → red flashing/purple flashing.
◎ Memory Mode
When the flashlight is in any mode under white light mode, it will automatically memorize the current working mode. After it is turned off, it will start to work in the current memory mode.
Lock: When the flashlight is turned off, double click the switch quickly to enter lock mode, the flashlight will flash twice and then enter lock mode.
Lock: When the flashlight is turned off, double click the switch quickly to enter lock mode, the flashlight will flash twice and then enter lock mode. Power indicator
When the flashlight is turned off, please touch the top switch and you will see the power indicator lights up and go out automatically after 2 seconds. Different colors show different remaining battery power, the corresponding relationship is as follows:

Green: 80%-100% Yellow: 20%-80% Red: 5%-20% Red flashing: 1%-5% IP66 level of protection
Up to 6 levels of dust- proof, completely prevent dust from entering, 6 levels of waterproof, can be used in rainy days. Product parameters

Mode，moonlight， Low ，Middle,  Red light/UV 
Brightness ,Runtime,Beam distance ,Candela,Impact Resistance,Waterproof,Additional Functio
Intelligent temperature control, low voltage warning,battery power indicator, Type-C rechargeable,  Short circuit protection.
Note: The above parameters are only approximate values, Tested in a laboratory environment. The value may change with changes in the use environment. 1. Using the international patent latest generation LED, life of 50000 hours.
2. Dual light source EDC flashlight, one-key dimming.
3. Max 320 lumens brightness and 86 meters longest beam distance.
4. Built-in 300mAh lithium polymer battery support Type-C charging directly.
5. Support 1 lumen moonlight mode, with memory modefunction.
6. With low voltage warning and intelligent temperature control downshift/step-down function
7. The shell is made of aviation aluminum alloy CNC finishing, and the surface is with anodized hard oxidation treatment.
8.size:51.8mm*24.5mm*12mm
9.Net weight: 22.5g
10.The 365nm band UV light source has a wide range of uses. The 620nm band red light source with strong penetrating power, suitable for a variety of scenes.

BATTERY OPTION:
1. Internal battery with side USB charging
2. 3x 21700 battery in magazine (no charger)
3. 3x 21700 battery in magazine (Incl TF TR-018 charger)
Features
LED OPTION
- Option1: Utilizes 8x CREE XHP70.2 LEDs (6500K) with a max output of 41,500 lumens
              Maximum beam intensity of 160,000 cd, and maximum throw distance of 800 meters
- Option2: Utilizes 8x CREE XHP70.2 LEDs (5000K) with a max output of 39,425 lumens
              Maximum beam intensity of 144,400 cd, and maximum throw distance of 760 meters
- Option3: Utilizes 8x LUMINUS SFT40 LEDs (6500K) with a max output of 20,000 lumens
              Maximum beam intensity of 360,000 cd, and maximum throw distance of 1,200  meters
Integrated precision digital optics technology provides extreme reflector performance
Utilizes dual-sided AR coated, 99% transmittance toughened glass lens
A step-down constant current circuit design with an efficiency rate up to 98%

Buil-in 10.8V / 4200mAh li-ion battery pack (made by 3x 3.6V/4200mAh 21700 battery cells) or
Power by 3x high drain 21700 batteries

Fast USB Type-C charging with discharging function available (not in 3x 21700 battery option)
Build in battery Features
1.8 hours for full charging, 1.5 hours for full charging over 90% 
Built-in intelligent adaptive charging and discharging function and protocols of QC3.0 & PD3.0
With advanced intelligent temperature regulation module, MK38 regulates its output and adapts to the ambient environment, maintaining optimal performance
Electronic reverse polarity protection and over-discharge protection
Integrated power indicator under the side switch indicates remaining battery voltage
Integrated indicator near USB-C port indicates the status of charging & powerbank discharging
Multi-switches design, clear division:
- Stainless steel side switch control the light to turn on/off and change modes etc
- Front switch on handle control 2x waterproof cooling fans to turn on/off
- Rear switch on handle control the light to turn on/off and change modes etc
User interface is simple and friendly, easy one-hand operation:
- From OFF, long press to ECO modes.
- From OFF, single press to General modes.
- Double click to Turbo from any modes (except LOCK-OUT)
- From OFF, quick triple click to Special modes (Strobe / Beacon / SOS to select)
- From OFF, quick quadrple click to lock-out the light
CNC machined from durable aircraft-grade aluminum alloy
Surface finish (option): Premium type-III hard-anodized or Micro-arc oxidation
Stainless steel strike bezel is used to break windows in an emergency situation
Triple-interface on flashlight head: Stainless steel side switch, UNC1/4" triple hole, waterproof 4PIN connector socket
Built-in UNC1/4" tripod hole, MK38 can be directly mounted to a tripod, turning it into a camp light or a fixed supplementary light
Utilizes stainless steel side switch with CD pattern surface for good touch feelings
Detachable handheld handle meets various lighting demands
Triple-sided premium cooling fins improve heat dissipation performance
Built-in double-row cooling fans on the handle to blow effectively cooling fins through outside
Convenient tail-stand capacbility
IPX-7 waterproof standard (1 meters under water)
Impact resistant to 1 meter
What's package Included?
1x Manker MK38 flashlight (built-in battery pack or 3x 21700 as per top selection)
1x Detachable handle
1x USB Type-C cable (build in battery option)
1x Super charging adapter (Plug option: European) (build in battery option)
1x Quick release screw
1x Stainless steel tag tool
1x Lanyard
1x User manual Technical Data
MK38 with 8x CREE XHP70.2 LEDs 6500K:
Modes/Level                                                           Luminance             Runtime
Turbo mode - Turbo level (Thermal regulation):        41,500 lumens        1 hours 30 minutes
General mode - High level (Thermal regulation):       20,000 lumens        1 hours 40 minutes
General mode - Mid3 level (Thermal regulation):       10,000 lumens        1 hours 50 minutes
General mode - Mid2 level:                                     5,000 lumens        2 hours 20 minutes
General mode - Mid1 level:                                     2,200 lumens        5 hours
General mode - Low level:                                      1,000 lumens       10 hours
ECO mode - L4 level:                                                400 lumens       20 hours
ECO mode - L3 level:                                                180 lumens       28 hours
ECO mode - L2 level:                                                 80 lumens        50 hours
ECO mode - L1 level:                                                 40 lumens        66 hours
Special mode - Strobe:                                        25,000 lumens         -
Maximum light intensity: 160,000 cd
Maximum beam distance: 800 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
MK38 with 8x CREE XHP70.2 LEDs 5000K:
Modes/Level                                                            Luminance               Runtime
Turbo mode - Turbo (Thermal regulation):                39,425 lumens          1 hours 30 minutes
General mode - High level (Thermal regulation):       19,000 lumens          1 hours 40 minutes
General mode - Mid3 level (Thermal regulation):         9,500 lumens          1 hours 50 minutes
General mode - Mid2 level:                                      4,600 lumens          2 hours 20 minutes
General mode - Mid1 level:                                      2,090 lumens          5 hours
General mode - Low level:                                          950 lumens        10 hours
ECO mode - L4 level:                                                 400 lumens        20 hours
ECO mode - L3 level:                                                 180 lumens        28 hours
ECO mode - L2 level:                                                   80 lumens        50 hours
ECO mode - L1 level:                                                   40 lumens        66 hours
Special mode - Strobe:                                          23,750 lumens          -
Maximum light intensity: 144,400 cd
Maximum beam distance: 760 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
MK38 with 8x LUMINUS SFT40 LEDs 6500K:
Modes/Level                                                               Luminance          Runtime
Turbo mode - Turbo (Thermal regulation):                 20,000 lumens         2 hours
General mode - High level (Thermal regulation):        10,000 lumens         2 hours 15 minutes
General mode - Mid3 level (Thermal regulation):          5,000 lumens         2 hours 30 minutes
General mode - Mid2 level:                                       2,500 lumens         3 hours
General mode - Mid1 level:                                       1,300 lumens         6 hours
General mode - Low level:                                           650 lumens       12 hours
ECO mode - L4 level:                                                  320 lumens       22 hours
ECO mode - L3 level:                                                  160 lumens       33 hours
ECO mode - L2 level:                                                    80 lumens       50 hours
ECO mode - L1 level:                                                    40 lumens       66 hours
Special mode - Strobe:                                           12,000 lumens         -
Maximum light intensity: 360,000 cd
Maximum beam distance: 1,200 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
More information, please check the table on the photo as belows:
(* Note: You can open this photo in new tab on your Google chrome to enlarge.). Note: The front switch on the handle can turn on/off the cooling fans. The stailess steel side swtich on flashlight head and the rear switch on the handle can control flashlight ON/OFF, mode operation etc.
Cooling Fan Operation
ON/OFF: In any state (except LOCK-OUT), single click the front switch on the handle to turn on 2x cooling fans. A single click after this turns the fans OFF.
△ Note: When the light is ON, Single click side switch (or rear switch) also to turn off the cooling fans.
Mode Operation
ON/OFF: When the light is OFF, any click the side switch (or the rear switch) to turn the light ON. When the light is ON, just single click the side switch (or the rear switch) to turn the light OFF.
ECO Modes: From OFF, simple press and hold down the side switch (or the rear switch) to activate ECO modes. press and hold down the side switch (or the rear switch) again after this activates. the light cycle through "L1->L2->L3->L4" (or "L4->L3->L2->L1"). When the light cycle to the last level "L4" (or "L1"), the light will stop to cycle and stay at last level. If you want to select one level you need, just release the side switch (or the rear switch) while the light cycling. If you press and hold down the side switch (or the rear switch) again, the light will be cycled through opposite direction.
△ Note: After activate ECO modes, single click to turn OFF the light; double click to activate Turbo mode; quickly triple click to activate Special modes.
General modes: Single click the side switch (or the rear switch) to activate General modes. Press and hold down the side switch (or the rear switch) agin after this activates. the light cycle through "Low->Mid1-Mid2 ->Mid3->High" (or "High->Mid3->Mid2->Mid1->Low"). When the light cycle to the last level "High" (or "Low"), the light will stop to cycle and stay at last level. If you want to select one level you need, just release the side switch (or the rear switch) while the light cycling. If you press and hold on the side switch (or the rear switch) again, the light will be cylced through opposite direction.
△ Note: After activate general modes, single click to turn OFF the light; Double click to activate Turbo mode; Quickly triple click to activate Special modes.
Turbo mode: Double click the side switch (or the rear switch) to activate Turbo from any other modes (except LOCK-OUT).
△ Note: After activate Turbo mode, single click to turn OFF the light; double click or long press to activate General modes; quickly triple click to activate Special modes.
Special modes: From OFF, quickly triple click the side switch (or the rear switch) to activate strobe. From strobe, press and hold down to cycle through the other safety modes; Beacon > SOS > back to strobe.
△ Note: After activate Special modes, single click to turn OFF the light; double click to activate Turbo mode; quickly triple click to activate General modes.
Breathing light mode: From OFF, click and hold for 3 seconds and release. LED indicator under the side switch will start to breath. There is nothing particular about this except that it is a cool mood light. Click once to turn off.
△ Note: While holding down the side switch (or the rear switch) for 3 seconds, MK38 will activate one level of ECO modes and turn off automatically, and then LED indicator under the side switch will turn on. 
LOCK-OUT / UNLOCK: Locking out the light when not in use is highly recommended. From OFF, quickly quadruple click (simply click 4 times fast) to LOCK-OUT. The light will then a blink to indicate that it has been LOCKED. To UNLOCK, quickly quadruple click (simply click 4 times fast) again, the light will turn on to indicate it has been unlocked.
Memory function: From OFF, single click (or long press) the side switch (or the rear switch) to activate the light level at General modes (or ECO modes) last used.Battery pack charging:
1. Please switch off the light and plug the USB Type-C charging cable into the included standard adapter, then connect another USB Type-C socket of the charging cable to the light.
2. MK38 have intelligent identified charging function. When battery pack charging, the indicator near USB-C port will be red constant ON, the indicator will be OFF after battery pack charging is completed.
3. Be sure to close the anti-dust USB cover once battery pack charing is completed.
Power bank function:
1. Please switch off the light and connect the USB Type-C socket of the included charing cable to the light, then connect another USB Type-C socket of the charging cable to the digital device with a USB type-C charging port.
2. MK38 have intelligent identified discharging function. When battery pack discharging as power bank, the indicator will be red constant-ON.
3. Be sure to close the anti-dust USB cover once the battery pack discharging is completed.* Note:  
A. You can turn the light ON / OFF and operate all modes when charging & discharging.
B. Battery pack can be full charged in approximately 1.8 hours with the included standard adapter and USB Type-C charging cable.
C. Recharge a stored every four months to maintain optimum performance of the battery.
D. When Connecting to the power bank with the same PD protocol, It might fail to be charged if the protocols are not compatible with the device. For example, Power bank is charging to MK38, or MK38 is charging to the power bank.
E. As a power bank, MK38 can charge only one digital device at a time. Please DO NOT use it to charge a digital device through any multi-port USB hub or charge two or more digital devices at the same time.
Battery Voltage Indicator
When the light is turned on, the built-in power indicator under the stainless steel side switch will show different color light to indicate remaining battery voltage:While battery voltage > 10.2V, blue light turn on and last 3s.
While battery voltage 9.6V-10.2V, purple light turn on and last 3s.
While battery voltage 8.7V-9.6V, red light constant-on.
While battery voltage < 8.7V, the light turn off authomatically.
* Low voltage warning
When the battery voltage level drops below the present level, the light is programmed to downshift to a lower brightness level until lowest output is reached. When the battery voltage level still drops low under lowest output, it will shut off authomatically.
Intelligent Overheat Protection
Advanced intelligent temperature regulation technology allows MK38 to dynamically adjust output performance according to its body temperature.The light will accumulate a lot of heat when you use it at high-output levels for extended periods. When the light reaches the temperature of 65°C or above, the light will automatically step down its output to reduce the temperature. at the same time we also make more premium cooling fins on flashlight head and built-in duable-row fans to blow effectively these cooling fins through the outside to protect flashlight overheat.
* Note: DO NOT submerge the flashlight into any liquid when it is hot. Doing so may cause irrepareable damage to the light due to the difference of air pressure inside and outside of tube.Note: We also high recommend the oridinary users to purhcase Samsung 40T unprotected flat-top 21700 batteries or Modell P42A unprotected flat-top 21700 batteries to drive MK38.
Battery Installation
1. Loose the tailcap counterclockwise and take it away.
2. As shown in the graph, insert batteries with the positive (+) to connect the glod plated copper positive round conductive plate on tailcap PCB, the nagative (-) to connect the glod plated copper spring on PCB.
3. Tighten the tailcap by aligning the two metal pins on the tailcap with the corresponding holes on the flashlight body, and rotate clockwise.
* Warning: 1. DO NOT mix rechargeable and non-rechargeable batteries
                 2. DO NOT mix batteries of different types/brands
                 3. DO NOT mix batteries of different power levels
                 4. DO NOT mix old and new batteries Battery Voltage Indicator
When the light is turned on, the built-in power indicator under the stainless steel side switch will show different color light to indicate remaining battery voltage: While battery voltage > 10.2V, blue light turn on and last 3s.
While battery voltage 9.6V-10.2V, purple light turn on and last 3s.
While battery voltage 8.7V-9.6V, red light constant-on.
While battery voltage < 8.7V, the light turn off authomatically.
* Low voltage warning
When the battery voltage level drops below the present level, the light is programmed to downshift to a lower brightness level until lowest output is reached. When the battery voltage level still drops low under lowest output, it will shut off authomatically.
Intelligent Overheat Protection
Advanced intelligent temperature regulation technology allows MK38 to dynamically adjust output performance according to its body temperature.The light will accumulate a lot of heat when you use it at high-output levels for extended periods. When the light reaches the temperature of 65°C or above, the light will automatically step down its output to reduce the temperature. at the same time we also make more premium cooling fins on flashlight head and built-in duable-row fans to blow effectively these cooling fins through the outside to protect flashlight overheat.
* Note: DO NOT submerge the flashlight into any liquid when it is hot. Doing so may cause irrepareable damage to the light due to the difference of air pressure inside and outside of tube.How to disassemble the handle?
1.Switch off flashlight and use tag tool (included accessory) to press the quick release screw on the counterbored hole, loose the screw counterclockwise, and then twist out the screw with your hand.
2.Lift up the handle, 4PIN connectors on the handle will take off from the connector socket on flashlight head. then you can place the handle to somewhere.
3. Please insert quick release screw into the connector socket and tighten it. At last please use tage tool (included acccessory) to press the screw to tighten it fully to get a waterproof, and then you can switch on flashlight as usual.
How to install the handle?
1.Switch off flashlight and use tag tool (included accessory) to press the quick release screw on the connector socket, loose the screw counterclockwise, and then twist out the screw with your hand.
2.Lift up the handle, make sure the the counterbored hole align the screw hole on flashlight body and 4PIN connectors on the handle will also align the connector socket on flashlight head.
3.Put the screw through the counterbored hole and make the screw tip into the screw hole on flashlight body, and then take tag tool (included accessory) to press the screw to tighen.
Warning
1. The flashlight is locked out default by us. Please quickly four-click to unlock it for the first use.
2. The flashlight is high-intensity lighting device capable of causing eye damage or other harms, so please avoid shining the light directly into anyone's eyes. 3. The flashlight is recommended use for adult or under adult supervision. Please keep this flashlight away from children.
4. Please take off the dustproof filme from lens immediately for the first use.
5. This flashlight is capable of emitting intense heat when turning on for a long period of time. Remember to install the handle before using. Avoid touching the appearance of the flashlight.
6. DO NOT shine a object at close range, cover the flashlight, or place the head to face down when it is turn on. The heat bilt-up may objects to burn or even result in unexpected disasters.
7. After the cooling fans ON, DO NOT push your fingers into fans and force them to stop working as it will demage the fans.
8. DO NOT immerse the flashlight in seawater or other correosive media as it will damage the flashlight.
9. Please turn the flashlight off and make sure that its lock out if it is left unused, carried or transproted. The heat built-up due to accidental activation may melt the lens of the flashlight, cause close objects to urn, or even result in unexpected disasters.
10. The built-in battery pack is charged to approximately 50% by default and will not support maximum output and maximum runtime.
11. To maintain waterproof rating, please lubricate the o-ring with silicone safe lubricant and replace worn o-rings as needed.
12. Please recharge the product every 4 months when left unused for a prolonged time.
13. DO NOT disassemble or modify this product which can cause damage and will void the warranty.
14. When battery pack are full charged, led indicator will turn OFF. at the same time please don't forget to take off USB Type-C charging cable and close the anti-dust USB cover immediately.
15. After uninstall the handle, please put the quick release screw into the connector socket on the flashlight head and tighten it to get a better waterproof.
16.After discharge as power bank is complete, please don't forget to close the anti-dust USB cover immediately

18650 battery charger NOT included

Recommended charger: https://torchsa.com/chargers/969-trustfire-tr-018-charger.html?search_query=TR-018&results=5

LED option1:
12 x CREE XHP50.2 LED (Cool White)
Max output 26,000 lumens, max throw distance of 283 meters

LED option1:
12 x LUMINUS SST40 LED (Cool White)
Max output 20,000 lumens, max throw distance of 350 meters

LED option1:
12 x LUMINUS SST40 LED (Neutral White)
Max output 17,600 lumens, max throw distance of 330 meters

Utilizes 3 set micro-orange peel quad-core reflectors for uniform and softer extensive peripheral illumination
Toughened ultra-clear glass lens with anti-reflective coating
Power by 3x 18650 rechargeable li-ion batteries (Excluded)
Working voltage: 8.7V - 12.6V
High efficiency constant circuit provides stable output (Non-PWM)
With advanced intelligent temperature regulation module, MK34 II regulates its output and adapts to the ambient environment, maintaining optimal performance
Electronic reverse polarity protection and over-discharge protection
Integrated indicator in side switch indicates remaining battery voltage

User-friendly Interface, easy & fast one handed operation:
One button control all brightness levels and functions
Five user selectable moonlight mode(0.1 - 2 lm) to meet different requirement
Single click to general mode, friendly adjust 5 different brightness levels
Double click to enter Turbo from any modes (except lock-out mode)
Triple click to special mode:Strobe/Beacon/SOS
Memory function stores brightness level last used
Lockout mode prevents accidental activation
Constructed from aircraft-grade aluminum alloy
Premium type-III hard-anodized anti-abrasive finish
Body oxidation color: Gun grey
Triangle shaped flashlight head and ultra-compact flashlight body allow the end users to operate MK34II easy with one hand.
Integrated battery magazine design allows for a lighter and more compact body
Three-sided cooling fins improve heat dissipation performance
MK34 II can be directly mounted to a tripod, turning it into a camp light or a fixed supplementary light
Chrome plated stainless steel bezel ring protects core components from damage
Utilizes stainless steel button with CD pattern surface for good touch feelings
Immersion gold and gold plated connector to ensure an effective conductivity
Built-in lanyard hole (inner diameter: 0.157"/ 4mm)
Trapezoidal thread offer high strength and durability,allow taicap twists smoothly
Convenient tail-stand capacbility
IPX-8 waterproof standard (2 meters under water)
Lightweight and portable, weigh only 11.15oz / 316g
Compact and pocket size, Length is only 4.31"/109.5mm

Accessory: Quality holster, Lanyard, Waterproof O-ring, User manual, 3/8" to 1/4" Tripod Thread Adapter.

Output/runtime (12 x CREE XHP50.2 LED Cool White)
Moonlight: 0.1 Lumens - 68 hours
Low: 140 Lumens - 26 hours
Mid1: 650 Lumens - 7 hours 30 minutes
Mid2: 1600 Lumens - 2 hours 20 minutes
Mid3: 4500 Lumens - 1 hours 50 minutes
High: 10,000 Lumens - 1 hours 35 minutes
Turbo: 26,000 Lumens - 1 hours 20 minutes
Strobe: 26,000 Lumens

Peak beam intensity: 20,000 cd
Maximum beam distance: 283 meters
Impact resistance: 1 meters
Waterproof standard: IPX-8,2M.

ON / OFF
ON: When the light is off, single click, long press, double or triple click the switch to turn it on.
OFF: When the light is on, single click the switch to turn it off.

General mode
General mode: While OFF, single click switch to enter general mode. Press and hold on switch to adjust 5 general brightness levels (cycle through 'Low >Mid1 > Mid2 > High' or 'High > Mid2 > Mid1 > Low'). Release switch to select one level you want. Press and hold on switch again to cycle levels through opposite direction. While cycle to last level 'high' (or 'low'), the light will stay this level and stop cycle. After entering in general mode, single click switch to turn it off; double click to Turbo; triple click to special mode.

Moonlight mode
While OFF, long press 1 second to enter moonlight mode. there have 5 lower brightness levels from 0.1lm to 2lm. Press and hold on switch to cycle 5 different levels. Release switch to select one level you want as the similar operation in general mode. After entering moonlight mode, single click to turn it off; double click to Turbo; triple click to special mode.

Turbo mode
Double click to enter Turbo mode from any modes (except lock-out mode). After entering turbo mode, single click to turn it off; double click or long press to general mode; triple click to special mode.

Special mode
While OFF, triple click switch to enter special mode. Press and hold on switch to cycle through 'strobe - beacon - SOS' automatically. Release switch to select one level you want. After antering special mode, single click switch to turn it off; double click to Turbo; Triple click to general mode.

Button breath flash mode
While OFF, long press the switch for 3 seconds to enter button breath flash mode (firstly moonlight will turn on and then turn off).
While lock-out, single click switch to enter breath flash mode; single click again to leave breath flash mode.

Lock / unlock
While OFF, quick quadrple clicks will lock-out the flashlight (4 flickers show successful lock-out). While locked-out, quick quadrple clicks again will unlock.
Memory function
While OFF, single click (or long press) to enter general mode (or moonlight mode) last used.

Ultra Tec SLS Solar LED Silicone Water Proof Bottle Box - Green Ultra Tec Silicone Solar Lanterns offer the user a break resistant, silicone and tough ABS rechargeable light. It has a waterproof rating of IP66 and is rechargeable by Solar or USB

Features:
- Lighting modes: High-Turbo-flashing-off
- USB charge or solar charge
- Waterproof IP66 - Can be used as waterproof camping, emergency, storage lantern - With hanging handle, suitable for mountaineering, camping, hiking and traveling
- As a storage containers, use for survival gear, first-aid medicine, mobile phone, lighters etc. Main Technical Details:
- Lighting: - Solar charge Input voltage (750W ) 5.5V
- Output voltage (Resistance 500ª) 5.0V
- Output current (Resistance 500ª) 10mA
- Input voltage 5.0 0.2V
- Charging port Micro USB port
- The Max. Luminous Flux ( Turbo Mode) 100Lm
- The Max. Luminous Flux of High Mode 50Lm
- Run time(Turbo-brightness after fully charged) 5 hours
- Run time(High-brightness after fully charged) 12 hours
- Input charging Max current 180mA
- Fully charged time by external power adapter about 5 hours

Specification:
- Built-in battery 1000mAh 3.7V Lithium polymer battery
- Dimensions: 90mm x 90mm x 180mm
- Colour: Green
- Weight: 0.3kg
- Material: Silicone
- Warranty: 1 Year with proof of purchase excluding consumables

BATTERY OPTION:
1. Internal battery with side USB charging
2. 3x 21700 battery in magazine (no charger)
3. 3x 21700 battery in magazine (Incl TF TR-018 charger)
Features
LED OPTION
- Option1: Utilizes 8x CREE XHP70.2 LEDs (6500K) with a max output of 41,500 lumens
              Maximum beam intensity of 160,000 cd, and maximum throw distance of 800 meters
- Option2: Utilizes 8x CREE XHP70.2 LEDs (5000K) with a max output of 39,425 lumens
              Maximum beam intensity of 144,400 cd, and maximum throw distance of 760 meters
- Option3: Utilizes 8x LUMINUS SFT40 LEDs (6500K) with a max output of 20,000 lumens
              Maximum beam intensity of 360,000 cd, and maximum throw distance of 1,200  meters
Integrated precision digital optics technology provides extreme reflector performance
Utilizes dual-sided AR coated, 99% transmittance toughened glass lens
A step-down constant current circuit design with an efficiency rate up to 98%

Buil-in 10.8V / 4200mAh li-ion battery pack (made by 3x 3.6V/4200mAh 21700 battery cells) or
Power by 3x high drain 21700 batteries

Fast USB Type-C charging with discharging function available (not in 3x 21700 battery option)
Build in battery Features
1.8 hours for full charging, 1.5 hours for full charging over 90% 
Built-in intelligent adaptive charging and discharging function and protocols of QC3.0 & PD3.0
With advanced intelligent temperature regulation module, MK38 regulates its output and adapts to the ambient environment, maintaining optimal performance
Electronic reverse polarity protection and over-discharge protection
Integrated power indicator under the side switch indicates remaining battery voltage
Integrated indicator near USB-C port indicates the status of charging & powerbank discharging
Multi-switches design, clear division:
- Stainless steel side switch control the light to turn on/off and change modes etc
- Front switch on handle control 2x waterproof cooling fans to turn on/off
- Rear switch on handle control the light to turn on/off and change modes etc
User interface is simple and friendly, easy one-hand operation:
- From OFF, long press to ECO modes.
- From OFF, single press to General modes.
- Double click to Turbo from any modes (except LOCK-OUT)
- From OFF, quick triple click to Special modes (Strobe / Beacon / SOS to select)
- From OFF, quick quadrple click to lock-out the light
CNC machined from durable aircraft-grade aluminum alloy
Surface finish (option): Premium type-III hard-anodized or Micro-arc oxidation
Stainless steel strike bezel is used to break windows in an emergency situation
Triple-interface on flashlight head: Stainless steel side switch, UNC1/4" triple hole, waterproof 4PIN connector socket
Built-in UNC1/4" tripod hole, MK38 can be directly mounted to a tripod, turning it into a camp light or a fixed supplementary light
Utilizes stainless steel side switch with CD pattern surface for good touch feelings
Detachable handheld handle meets various lighting demands
Triple-sided premium cooling fins improve heat dissipation performance
Built-in double-row cooling fans on the handle to blow effectively cooling fins through outside
Convenient tail-stand capacbility
IPX-7 waterproof standard (1 meters under water)
Impact resistant to 1 meter
What's package Included?
1x Manker MK38 flashlight (built-in battery pack or 3x 21700 as per top selection)
1x Detachable handle
1x USB Type-C cable (build in battery option)
1x Super charging adapter (Plug option: European) (build in battery option)
1x Quick release screw
1x Stainless steel tag tool
1x Lanyard
1x User manual Technical Data
MK38 with 8x CREE XHP70.2 LEDs 6500K:
Modes/Level                                                           Luminance             Runtime
Turbo mode - Turbo level (Thermal regulation):        41,500 lumens        1 hours 30 minutes
General mode - High level (Thermal regulation):       20,000 lumens        1 hours 40 minutes
General mode - Mid3 level (Thermal regulation):       10,000 lumens        1 hours 50 minutes
General mode - Mid2 level:                                     5,000 lumens        2 hours 20 minutes
General mode - Mid1 level:                                     2,200 lumens        5 hours
General mode - Low level:                                      1,000 lumens       10 hours
ECO mode - L4 level:                                                400 lumens       20 hours
ECO mode - L3 level:                                                180 lumens       28 hours
ECO mode - L2 level:                                                 80 lumens        50 hours
ECO mode - L1 level:                                                 40 lumens        66 hours
Special mode - Strobe:                                        25,000 lumens         -
Maximum light intensity: 160,000 cd
Maximum beam distance: 800 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
MK38 with 8x CREE XHP70.2 LEDs 5000K:
Modes/Level                                                            Luminance               Runtime
Turbo mode - Turbo (Thermal regulation):                39,425 lumens          1 hours 30 minutes
General mode - High level (Thermal regulation):       19,000 lumens          1 hours 40 minutes
General mode - Mid3 level (Thermal regulation):         9,500 lumens          1 hours 50 minutes
General mode - Mid2 level:                                      4,600 lumens          2 hours 20 minutes
General mode - Mid1 level:                                      2,090 lumens          5 hours
General mode - Low level:                                          950 lumens        10 hours
ECO mode - L4 level:                                                 400 lumens        20 hours
ECO mode - L3 level:                                                 180 lumens        28 hours
ECO mode - L2 level:                                                   80 lumens        50 hours
ECO mode - L1 level:                                                   40 lumens        66 hours
Special mode - Strobe:                                          23,750 lumens          -
Maximum light intensity: 144,400 cd
Maximum beam distance: 760 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
MK38 with 8x LUMINUS SFT40 LEDs 6500K:
Modes/Level                                                               Luminance          Runtime
Turbo mode - Turbo (Thermal regulation):                 20,000 lumens         2 hours
General mode - High level (Thermal regulation):        10,000 lumens         2 hours 15 minutes
General mode - Mid3 level (Thermal regulation):          5,000 lumens         2 hours 30 minutes
General mode - Mid2 level:                                       2,500 lumens         3 hours
General mode - Mid1 level:                                       1,300 lumens         6 hours
General mode - Low level:                                           650 lumens       12 hours
ECO mode - L4 level:                                                  320 lumens       22 hours
ECO mode - L3 level:                                                  160 lumens       33 hours
ECO mode - L2 level:                                                    80 lumens       50 hours
ECO mode - L1 level:                                                    40 lumens       66 hours
Special mode - Strobe:                                           12,000 lumens         -
Maximum light intensity: 360,000 cd
Maximum beam distance: 1,200 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
More information, please check the table on the photo as belows:
(* Note: You can open this photo in new tab on your Google chrome to enlarge.). Note: The front switch on the handle can turn on/off the cooling fans. The stailess steel side swtich on flashlight head and the rear switch on the handle can control flashlight ON/OFF, mode operation etc.
Cooling Fan Operation
ON/OFF: In any state (except LOCK-OUT), single click the front switch on the handle to turn on 2x cooling fans. A single click after this turns the fans OFF.
△ Note: When the light is ON, Single click side switch (or rear switch) also to turn off the cooling fans.
Mode Operation
ON/OFF: When the light is OFF, any click the side switch (or the rear switch) to turn the light ON. When the light is ON, just single click the side switch (or the rear switch) to turn the light OFF.
ECO Modes: From OFF, simple press and hold down the side switch (or the rear switch) to activate ECO modes. press and hold down the side switch (or the rear switch) again after this activates. the light cycle through "L1->L2->L3->L4" (or "L4->L3->L2->L1"). When the light cycle to the last level "L4" (or "L1"), the light will stop to cycle and stay at last level. If you want to select one level you need, just release the side switch (or the rear switch) while the light cycling. If you press and hold down the side switch (or the rear switch) again, the light will be cycled through opposite direction.
△ Note: After activate ECO modes, single click to turn OFF the light; double click to activate Turbo mode; quickly triple click to activate Special modes.
General modes: Single click the side switch (or the rear switch) to activate General modes. Press and hold down the side switch (or the rear switch) agin after this activates. the light cycle through "Low->Mid1-Mid2 ->Mid3->High" (or "High->Mid3->Mid2->Mid1->Low"). When the light cycle to the last level "High" (or "Low"), the light will stop to cycle and stay at last level. If you want to select one level you need, just release the side switch (or the rear switch) while the light cycling. If you press and hold on the side switch (or the rear switch) again, the light will be cylced through opposite direction.
△ Note: After activate general modes, single click to turn OFF the light; Double click to activate Turbo mode; Quickly triple click to activate Special modes.
Turbo mode: Double click the side switch (or the rear switch) to activate Turbo from any other modes (except LOCK-OUT).
△ Note: After activate Turbo mode, single click to turn OFF the light; double click or long press to activate General modes; quickly triple click to activate Special modes.
Special modes: From OFF, quickly triple click the side switch (or the rear switch) to activate strobe. From strobe, press and hold down to cycle through the other safety modes; Beacon > SOS > back to strobe.
△ Note: After activate Special modes, single click to turn OFF the light; double click to activate Turbo mode; quickly triple click to activate General modes.
Breathing light mode: From OFF, click and hold for 3 seconds and release. LED indicator under the side switch will start to breath. There is nothing particular about this except that it is a cool mood light. Click once to turn off.
△ Note: While holding down the side switch (or the rear switch) for 3 seconds, MK38 will activate one level of ECO modes and turn off automatically, and then LED indicator under the side switch will turn on. 
LOCK-OUT / UNLOCK: Locking out the light when not in use is highly recommended. From OFF, quickly quadruple click (simply click 4 times fast) to LOCK-OUT. The light will then a blink to indicate that it has been LOCKED. To UNLOCK, quickly quadruple click (simply click 4 times fast) again, the light will turn on to indicate it has been unlocked.
Memory function: From OFF, single click (or long press) the side switch (or the rear switch) to activate the light level at General modes (or ECO modes) last used.Battery pack charging:
1. Please switch off the light and plug the USB Type-C charging cable into the included standard adapter, then connect another USB Type-C socket of the charging cable to the light.
2. MK38 have intelligent identified charging function. When battery pack charging, the indicator near USB-C port will be red constant ON, the indicator will be OFF after battery pack charging is completed.
3. Be sure to close the anti-dust USB cover once battery pack charing is completed.
Power bank function:
1. Please switch off the light and connect the USB Type-C socket of the included charing cable to the light, then connect another USB Type-C socket of the charging cable to the digital device with a USB type-C charging port.
2. MK38 have intelligent identified discharging function. When battery pack discharging as power bank, the indicator will be red constant-ON.
3. Be sure to close the anti-dust USB cover once the battery pack discharging is completed.* Note:  
A. You can turn the light ON / OFF and operate all modes when charging & discharging.
B. Battery pack can be full charged in approximately 1.8 hours with the included standard adapter and USB Type-C charging cable.
C. Recharge a stored every four months to maintain optimum performance of the battery.
D. When Connecting to the power bank with the same PD protocol, It might fail to be charged if the protocols are not compatible with the device. For example, Power bank is charging to MK38, or MK38 is charging to the power bank.
E. As a power bank, MK38 can charge only one digital device at a time. Please DO NOT use it to charge a digital device through any multi-port USB hub or charge two or more digital devices at the same time.
Battery Voltage Indicator
When the light is turned on, the built-in power indicator under the stainless steel side switch will show different color light to indicate remaining battery voltage:While battery voltage > 10.2V, blue light turn on and last 3s.
While battery voltage 9.6V-10.2V, purple light turn on and last 3s.
While battery voltage 8.7V-9.6V, red light constant-on.
While battery voltage < 8.7V, the light turn off authomatically.
* Low voltage warning
When the battery voltage level drops below the present level, the light is programmed to downshift to a lower brightness level until lowest output is reached. When the battery voltage level still drops low under lowest output, it will shut off authomatically.
Intelligent Overheat Protection
Advanced intelligent temperature regulation technology allows MK38 to dynamically adjust output performance according to its body temperature.The light will accumulate a lot of heat when you use it at high-output levels for extended periods. When the light reaches the temperature of 65°C or above, the light will automatically step down its output to reduce the temperature. at the same time we also make more premium cooling fins on flashlight head and built-in duable-row fans to blow effectively these cooling fins through the outside to protect flashlight overheat.
* Note: DO NOT submerge the flashlight into any liquid when it is hot. Doing so may cause irrepareable damage to the light due to the difference of air pressure inside and outside of tube.Note: We also high recommend the oridinary users to purhcase Samsung 40T unprotected flat-top 21700 batteries or Modell P42A unprotected flat-top 21700 batteries to drive MK38.
Battery Installation
1. Loose the tailcap counterclockwise and take it away.
2. As shown in the graph, insert batteries with the positive (+) to connect the glod plated copper positive round conductive plate on tailcap PCB, the nagative (-) to connect the glod plated copper spring on PCB.
3. Tighten the tailcap by aligning the two metal pins on the tailcap with the corresponding holes on the flashlight body, and rotate clockwise.
* Warning: 1. DO NOT mix rechargeable and non-rechargeable batteries
                 2. DO NOT mix batteries of different types/brands
                 3. DO NOT mix batteries of different power levels
                 4. DO NOT mix old and new batteries Battery Voltage Indicator
When the light is turned on, the built-in power indicator under the stainless steel side switch will show different color light to indicate remaining battery voltage: While battery voltage > 10.2V, blue light turn on and last 3s.
While battery voltage 9.6V-10.2V, purple light turn on and last 3s.
While battery voltage 8.7V-9.6V, red light constant-on.
While battery voltage < 8.7V, the light turn off authomatically.
* Low voltage warning
When the battery voltage level drops below the present level, the light is programmed to downshift to a lower brightness level until lowest output is reached. When the battery voltage level still drops low under lowest output, it will shut off authomatically.
Intelligent Overheat Protection
Advanced intelligent temperature regulation technology allows MK38 to dynamically adjust output performance according to its body temperature.The light will accumulate a lot of heat when you use it at high-output levels for extended periods. When the light reaches the temperature of 65°C or above, the light will automatically step down its output to reduce the temperature. at the same time we also make more premium cooling fins on flashlight head and built-in duable-row fans to blow effectively these cooling fins through the outside to protect flashlight overheat.
* Note: DO NOT submerge the flashlight into any liquid when it is hot. Doing so may cause irrepareable damage to the light due to the difference of air pressure inside and outside of tube.How to disassemble the handle?
1.Switch off flashlight and use tag tool (included accessory) to press the quick release screw on the counterbored hole, loose the screw counterclockwise, and then twist out the screw with your hand.
2.Lift up the handle, 4PIN connectors on the handle will take off from the connector socket on flashlight head. then you can place the handle to somewhere.
3. Please insert quick release screw into the connector socket and tighten it. At last please use tage tool (included acccessory) to press the screw to tighten it fully to get a waterproof, and then you can switch on flashlight as usual.
How to install the handle?
1.Switch off flashlight and use tag tool (included accessory) to press the quick release screw on the connector socket, loose the screw counterclockwise, and then twist out the screw with your hand.
2.Lift up the handle, make sure the the counterbored hole align the screw hole on flashlight body and 4PIN connectors on the handle will also align the connector socket on flashlight head.
3.Put the screw through the counterbored hole and make the screw tip into the screw hole on flashlight body, and then take tag tool (included accessory) to press the screw to tighen.
Warning
1. The flashlight is locked out default by us. Please quickly four-click to unlock it for the first use.
2. The flashlight is high-intensity lighting device capable of causing eye damage or other harms, so please avoid shining the light directly into anyone's eyes. 3. The flashlight is recommended use for adult or under adult supervision. Please keep this flashlight away from children.
4. Please take off the dustproof filme from lens immediately for the first use.
5. This flashlight is capable of emitting intense heat when turning on for a long period of time. Remember to install the handle before using. Avoid touching the appearance of the flashlight.
6. DO NOT shine a object at close range, cover the flashlight, or place the head to face down when it is turn on. The heat bilt-up may objects to burn or even result in unexpected disasters.
7. After the cooling fans ON, DO NOT push your fingers into fans and force them to stop working as it will demage the fans.
8. DO NOT immerse the flashlight in seawater or other correosive media as it will damage the flashlight.
9. Please turn the flashlight off and make sure that its lock out if it is left unused, carried or transproted. The heat built-up due to accidental activation may melt the lens of the flashlight, cause close objects to urn, or even result in unexpected disasters.
10. The built-in battery pack is charged to approximately 50% by default and will not support maximum output and maximum runtime.
11. To maintain waterproof rating, please lubricate the o-ring with silicone safe lubricant and replace worn o-rings as needed.
12. Please recharge the product every 4 months when left unused for a prolonged time.
13. DO NOT disassemble or modify this product which can cause damage and will void the warranty.
14. When battery pack are full charged, led indicator will turn OFF. at the same time please don't forget to take off USB Type-C charging cable and close the anti-dust USB cover immediately.
15. After uninstall the handle, please put the quick release screw into the connector socket on the flashlight head and tighten it to get a better waterproof.
16.After discharge as power bank is complete, please don't forget to close the anti-dust USB cover immediately

Feature:
- LED option1: 1* LUMINUS SBT90 GEN2 LED
Max. 5,800 lumens output,Max beam intensity of 218,556cd and Max. 935 meters beam distance
- New optical grade PMMA TIR lens provides the higher quality and quantity of light in a soft and balanced beam
- Toughened ultra-clear glass lens with anti-reflective coating
- Power by 3x 18650 rechargeable li-ion batteries (included)
- Working voltage: 8.7V - 12.6V
- High efficiency constant circuit provides stable output (Non-PWM)
- With advanced intelligent temperature regulation module, MK37 regulates its output and adapts to the ambient environment, maintaining optimal performance
- Electronic reverse polarity protection and over-discharge protection
- Integrated power indicator in side switch indicates remaining battery power
- User-friendly Interface, easy & fast one handed operation
- One button control all brightness levels and functions
- Lockout mode prevents accidental activation
- Five user selectable moonlight mode(0.1 - 2 lm) to meet different requirement
- Intelligent memory function stores the brightness mode & mode cycle last used
- Constructed from aircraft-grade aluminum alloy
- Premium type-III hard-anodized anti-abrasive finish
- Body oxidation color option: Black or Sand
- Premium cooling fins Design
- MK37 can be directly mounted to a tripod, turning it into a camp light or a fixed supplementary light
- Diamond-pattern knurling provide a better gripping surface
- Immersion gold and gold plated connector to ensure an effective conductivity
- Built-in lanyard hole (inner diameter: 0.138in / 3.5mm)
- Convenient tail-stand capacbility
- IPX-8 waterproof standard (2 meters under water)
- Compact & lightweight, weigh only 10.51oz / 298g
- Size: 2.0 inch /52.2mm (head diameter) x 1.85inch /47mm (body diameter) x 5.1 inch / 128.57mm length
- Accessory: Holster *1, Lanyard *1, Waterproof o-ring *1, Manual *1, 3/8" to 1/4" Tripod Thread Adapter *1
Output/runtime/throw distance (LUMINUS SBT90.2)
Moonlight 0.1 lumens 70 hours
Low 70 lumens 30 hours 103 meters
Mid1 400 lumens 9 hours 30 minutes 226 meters
Mid2 1100 lumens 4 hours 400 meters
High 2800 lumens 1 hours 40 minutes 670 meters
Turbo 5800 lumens 1 hours 25 minutes 935 meters
Strobe 5800 lumens -
Peak beam intensity: 218,556 cd
Maximum beam distance: 935 meters
Impact resistance: 1 meters
Waterproof standard: IPX-8,2M.ON / OFF
ON: When the light is off, single click, long press, double or triple click the switch to turn it on.
OFF: When the light is on, single click the switch to turn it off.
General mode
While OFF, single click switch to enter general mode. Press and hold on switch to cycle through 'Low >Mid1 > Mid2 > High' (or 'High > Mid2 > Mid1 > Low'). Release switch to select one level you want. While cycle to last level 'high' (or 'low'),the light will stay this level and stop cycle. If turn to other level, release switch, and then press and hold on switch again, the light will cycle to opposite direction 'High > Mid2 > Mid1 > Low' (or 'Low > Mid1 > Mid2 > High'). After entering in general mode, single click switch to turn it off; double click to Turbo; triple click to special mode.
Moonlight mode
While OFF, long press 1 second to enter moonlight mode. there have 5 lower brightness levels from 0.1lm to 2lm. Press and hold on switch to cycle 5 different levels. Release switch to select one level you want as the similar operation in general mode. After entering moonlight mode, single click to turn it off; double click to Turbo; triple click to special mode.
Turbo mode
double click to enter Turbo mode from any modes (except lock-out mode). After entering turbo mode, single click to turn it off; double click or long press to general mode; triple click to special mode.
Special mode
While OFF, triple click switch to enter special mode. Press and hold on switch to cycle through 'strobe - beacon - SOS' automatically. Release switch to select one level you want. After antering special mode, single click switch to turn it off; double click to Turbo; Triple click to general mode.
Button breath flash mode
While OFF, long press the switch for 3 seconds to enter button breath flash mode (firstly moonlight will turn on and then turn off).
Lock / unlock
While OFF, quick quadrple clicks will lock-out the flashlight (4 flickers show successful lock-out). While locked-out, quick quadrple clicks again will unlock.
Intelligent Memory function
While OFF, single click (or long press) to enter general mode (or moonlight mode) last used. And then press and hold on switch, the light will be cycled to next level in same cycle direction last used.
Included:
-Manker MK37
-3x 18650 SAMUNG 30Q
-1x TrustFire TR-018 Charger

Size:

Tail Adapter: 1” (26.5mm) x 1.3” (32mm)
Thread: Tr24 x 1.5mm
Cable Length: 9.1” (23cm)
Overall Length: 13.4” (34cm)

Weight:

1.4 oz. (40g)

Material:

Cable: PU material
Tail Adapter: T6-grade aluminum

Compatible with:

TK26R

Noiseless pressure pad switch with a lifespan of 100,000 activations
Tactical round switch for momentary-on/constant-on
Tail adapter is made from T6-grade aluminum, type III hard-anodized anti-abrasive finish
Cable made from resilient PU material
IP68 rated dustproof and waterproof underwater to 2m.

The Fenix LD22 Flashlight 2015 G2 is an updated version of our best-selling LD22 model. The LD22 2015 Edt. still features the compact size while receiving new operation features and a higher output of 300 lumens, all from two AA batteries. The four brightness levels plus Strobe and SOS well meet lighting demands for daily use, hiking, searching, etc. An exciting new feature is the unique Outdoor Mode. In this mode, the Fenix LD22 2015 allows for standard flashlight operation: the side switch controls all output modes and the tail switch simply turns the light on and off. For fast and simplified functionality, the new Tactical Mode turns off the side switch and activates the turbo, strobe, and mid modes through the tactical tail switch only. View all the LD22 Specs below. Utilizes a Cree XP-G2(R5) LED with a lifespan of 50,000 hours 4 Brightness Modes Plus Rapid Strobe and Hidden SOS Outdoor Mode Turbo: 300 Lumens (Ni-MH: 1 hr. 25 min.; Alkaline: 40 min.) High: 100 Lumens (Ni-MH: 7 hr. 10 min.; Alkaline: 5 hr. 5 min.) Mid: 30 Lumens (Ni-MH: 25 hr. 5 min.; Alkaline: 22 hr. 30 min.) Low: 5 Lumens (Ni-MH: 100 hr.; Alkaline: 90 hr.) Strobe: 300 Lumens SOS: 100 Lumens Tactical Mode Turbo: 300 Lumens (Ni-MH: 1 hr. 25 min.; Alkaline: 40 min.) Mid: 30 Lumens (Ni-MH: 25 hr. 5 min.; Alkaline: 22 hr. 30 min.) Strobe: 300 Lumens Tactical tail switch with momentary-on function Maximum beam throw: 394 feet (120 meters)Stainless steel switch for output selection under Outdoor mode Dual operation mode and Outdoor Mode is the factory default setting Intelligent memory circuit (when in Outdoor Mode), automatically enters previously used brightness level when turned on Digitally regulated output maintains constant brightness Reverse polarity protection, to protect from improper battery installation Made of durable aircraft-grade aluminium Premium type III hard-anodized anti-abrasive finish Toughened ultra-clear glass lens with anti-reflective coating Waterproof to IPX-8 standard. 3 meters/9.8 feet for 30 min. Size Length: 6.1-inch (156mm) Diameter: 0.8-inch (21.5 mm) Weight: 2.5 oz. (60-grams) Excluding batteries

BATTERY OPTION:
1. Internal battery with side USB charging
2. 3x 21700 battery in magazine (no charger)
3. 3x 21700 battery in magazine (Incl TF TR-018 charger)
Features
LED OPTION
- Option1: Utilizes 8x CREE XHP70.2 LEDs (6500K) with a max output of 41,500 lumens
              Maximum beam intensity of 160,000 cd, and maximum throw distance of 800 meters
- Option2: Utilizes 8x CREE XHP70.2 LEDs (5000K) with a max output of 39,425 lumens
              Maximum beam intensity of 144,400 cd, and maximum throw distance of 760 meters
- Option3: Utilizes 8x LUMINUS SFT40 LEDs (6500K) with a max output of 20,000 lumens
              Maximum beam intensity of 360,000 cd, and maximum throw distance of 1,200  meters
Integrated precision digital optics technology provides extreme reflector performance
Utilizes dual-sided AR coated, 99% transmittance toughened glass lens
A step-down constant current circuit design with an efficiency rate up to 98%

Buil-in 10.8V / 4200mAh li-ion battery pack (made by 3x 3.6V/4200mAh 21700 battery cells) or
Power by 3x high drain 21700 batteries

Fast USB Type-C charging with discharging function available (not in 3x 21700 battery option)
Build in battery Features
1.8 hours for full charging, 1.5 hours for full charging over 90% 
Built-in intelligent adaptive charging and discharging function and protocols of QC3.0 & PD3.0
With advanced intelligent temperature regulation module, MK38 regulates its output and adapts to the ambient environment, maintaining optimal performance
Electronic reverse polarity protection and over-discharge protection
Integrated power indicator under the side switch indicates remaining battery voltage
Integrated indicator near USB-C port indicates the status of charging & powerbank discharging
Multi-switches design, clear division:
- Stainless steel side switch control the light to turn on/off and change modes etc
- Front switch on handle control 2x waterproof cooling fans to turn on/off
- Rear switch on handle control the light to turn on/off and change modes etc
User interface is simple and friendly, easy one-hand operation:
- From OFF, long press to ECO modes.
- From OFF, single press to General modes.
- Double click to Turbo from any modes (except LOCK-OUT)
- From OFF, quick triple click to Special modes (Strobe / Beacon / SOS to select)
- From OFF, quick quadrple click to lock-out the light
CNC machined from durable aircraft-grade aluminum alloy
Surface finish (option): Premium type-III hard-anodized or Micro-arc oxidation
Stainless steel strike bezel is used to break windows in an emergency situation
Triple-interface on flashlight head: Stainless steel side switch, UNC1/4" triple hole, waterproof 4PIN connector socket
Built-in UNC1/4" tripod hole, MK38 can be directly mounted to a tripod, turning it into a camp light or a fixed supplementary light
Utilizes stainless steel side switch with CD pattern surface for good touch feelings
Detachable handheld handle meets various lighting demands
Triple-sided premium cooling fins improve heat dissipation performance
Built-in double-row cooling fans on the handle to blow effectively cooling fins through outside
Convenient tail-stand capacbility
IPX-7 waterproof standard (1 meters under water)
Impact resistant to 1 meter
What's package Included?
1x Manker MK38 flashlight (built-in battery pack or 3x 21700 as per top selection)
1x Detachable handle
1x USB Type-C cable (build in battery option)
1x Super charging adapter (Plug option: European) (build in battery option)
1x Quick release screw
1x Stainless steel tag tool
1x Lanyard
1x User manual Technical Data
MK38 with 8x CREE XHP70.2 LEDs 6500K:
Modes/Level                                                           Luminance             Runtime
Turbo mode - Turbo level (Thermal regulation):        41,500 lumens        1 hours 30 minutes
General mode - High level (Thermal regulation):       20,000 lumens        1 hours 40 minutes
General mode - Mid3 level (Thermal regulation):       10,000 lumens        1 hours 50 minutes
General mode - Mid2 level:                                     5,000 lumens        2 hours 20 minutes
General mode - Mid1 level:                                     2,200 lumens        5 hours
General mode - Low level:                                      1,000 lumens       10 hours
ECO mode - L4 level:                                                400 lumens       20 hours
ECO mode - L3 level:                                                180 lumens       28 hours
ECO mode - L2 level:                                                 80 lumens        50 hours
ECO mode - L1 level:                                                 40 lumens        66 hours
Special mode - Strobe:                                        25,000 lumens         -
Maximum light intensity: 160,000 cd
Maximum beam distance: 800 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
MK38 with 8x CREE XHP70.2 LEDs 5000K:
Modes/Level                                                            Luminance               Runtime
Turbo mode - Turbo (Thermal regulation):                39,425 lumens          1 hours 30 minutes
General mode - High level (Thermal regulation):       19,000 lumens          1 hours 40 minutes
General mode - Mid3 level (Thermal regulation):         9,500 lumens          1 hours 50 minutes
General mode - Mid2 level:                                      4,600 lumens          2 hours 20 minutes
General mode - Mid1 level:                                      2,090 lumens          5 hours
General mode - Low level:                                          950 lumens        10 hours
ECO mode - L4 level:                                                 400 lumens        20 hours
ECO mode - L3 level:                                                 180 lumens        28 hours
ECO mode - L2 level:                                                   80 lumens        50 hours
ECO mode - L1 level:                                                   40 lumens        66 hours
Special mode - Strobe:                                          23,750 lumens          -
Maximum light intensity: 144,400 cd
Maximum beam distance: 760 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
MK38 with 8x LUMINUS SFT40 LEDs 6500K:
Modes/Level                                                               Luminance          Runtime
Turbo mode - Turbo (Thermal regulation):                 20,000 lumens         2 hours
General mode - High level (Thermal regulation):        10,000 lumens         2 hours 15 minutes
General mode - Mid3 level (Thermal regulation):          5,000 lumens         2 hours 30 minutes
General mode - Mid2 level:                                       2,500 lumens         3 hours
General mode - Mid1 level:                                       1,300 lumens         6 hours
General mode - Low level:                                           650 lumens       12 hours
ECO mode - L4 level:                                                  320 lumens       22 hours
ECO mode - L3 level:                                                  160 lumens       33 hours
ECO mode - L2 level:                                                    80 lumens       50 hours
ECO mode - L1 level:                                                    40 lumens       66 hours
Special mode - Strobe:                                           12,000 lumens         -
Maximum light intensity: 360,000 cd
Maximum beam distance: 1,200 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
More information, please check the table on the photo as belows:
(* Note: You can open this photo in new tab on your Google chrome to enlarge.). Note: The front switch on the handle can turn on/off the cooling fans. The stailess steel side swtich on flashlight head and the rear switch on the handle can control flashlight ON/OFF, mode operation etc.
Cooling Fan Operation
ON/OFF: In any state (except LOCK-OUT), single click the front switch on the handle to turn on 2x cooling fans. A single click after this turns the fans OFF.
△ Note: When the light is ON, Single click side switch (or rear switch) also to turn off the cooling fans.
Mode Operation
ON/OFF: When the light is OFF, any click the side switch (or the rear switch) to turn the light ON. When the light is ON, just single click the side switch (or the rear switch) to turn the light OFF.
ECO Modes: From OFF, simple press and hold down the side switch (or the rear switch) to activate ECO modes. press and hold down the side switch (or the rear switch) again after this activates. the light cycle through "L1->L2->L3->L4" (or "L4->L3->L2->L1"). When the light cycle to the last level "L4" (or "L1"), the light will stop to cycle and stay at last level. If you want to select one level you need, just release the side switch (or the rear switch) while the light cycling. If you press and hold down the side switch (or the rear switch) again, the light will be cycled through opposite direction.
△ Note: After activate ECO modes, single click to turn OFF the light; double click to activate Turbo mode; quickly triple click to activate Special modes.
General modes: Single click the side switch (or the rear switch) to activate General modes. Press and hold down the side switch (or the rear switch) agin after this activates. the light cycle through "Low->Mid1-Mid2 ->Mid3->High" (or "High->Mid3->Mid2->Mid1->Low"). When the light cycle to the last level "High" (or "Low"), the light will stop to cycle and stay at last level. If you want to select one level you need, just release the side switch (or the rear switch) while the light cycling. If you press and hold on the side switch (or the rear switch) again, the light will be cylced through opposite direction.
△ Note: After activate general modes, single click to turn OFF the light; Double click to activate Turbo mode; Quickly triple click to activate Special modes.
Turbo mode: Double click the side switch (or the rear switch) to activate Turbo from any other modes (except LOCK-OUT).
△ Note: After activate Turbo mode, single click to turn OFF the light; double click or long press to activate General modes; quickly triple click to activate Special modes.
Special modes: From OFF, quickly triple click the side switch (or the rear switch) to activate strobe. From strobe, press and hold down to cycle through the other safety modes; Beacon > SOS > back to strobe.
△ Note: After activate Special modes, single click to turn OFF the light; double click to activate Turbo mode; quickly triple click to activate General modes.
Breathing light mode: From OFF, click and hold for 3 seconds and release. LED indicator under the side switch will start to breath. There is nothing particular about this except that it is a cool mood light. Click once to turn off.
△ Note: While holding down the side switch (or the rear switch) for 3 seconds, MK38 will activate one level of ECO modes and turn off automatically, and then LED indicator under the side switch will turn on. 
LOCK-OUT / UNLOCK: Locking out the light when not in use is highly recommended. From OFF, quickly quadruple click (simply click 4 times fast) to LOCK-OUT. The light will then a blink to indicate that it has been LOCKED. To UNLOCK, quickly quadruple click (simply click 4 times fast) again, the light will turn on to indicate it has been unlocked.
Memory function: From OFF, single click (or long press) the side switch (or the rear switch) to activate the light level at General modes (or ECO modes) last used.Battery pack charging:
1. Please switch off the light and plug the USB Type-C charging cable into the included standard adapter, then connect another USB Type-C socket of the charging cable to the light.
2. MK38 have intelligent identified charging function. When battery pack charging, the indicator near USB-C port will be red constant ON, the indicator will be OFF after battery pack charging is completed.
3. Be sure to close the anti-dust USB cover once battery pack charing is completed.
Power bank function:
1. Please switch off the light and connect the USB Type-C socket of the included charing cable to the light, then connect another USB Type-C socket of the charging cable to the digital device with a USB type-C charging port.
2. MK38 have intelligent identified discharging function. When battery pack discharging as power bank, the indicator will be red constant-ON.
3. Be sure to close the anti-dust USB cover once the battery pack discharging is completed.* Note:  
A. You can turn the light ON / OFF and operate all modes when charging & discharging.
B. Battery pack can be full charged in approximately 1.8 hours with the included standard adapter and USB Type-C charging cable.
C. Recharge a stored every four months to maintain optimum performance of the battery.
D. When Connecting to the power bank with the same PD protocol, It might fail to be charged if the protocols are not compatible with the device. For example, Power bank is charging to MK38, or MK38 is charging to the power bank.
E. As a power bank, MK38 can charge only one digital device at a time. Please DO NOT use it to charge a digital device through any multi-port USB hub or charge two or more digital devices at the same time.
Battery Voltage Indicator
When the light is turned on, the built-in power indicator under the stainless steel side switch will show different color light to indicate remaining battery voltage:While battery voltage > 10.2V, blue light turn on and last 3s.
While battery voltage 9.6V-10.2V, purple light turn on and last 3s.
While battery voltage 8.7V-9.6V, red light constant-on.
While battery voltage < 8.7V, the light turn off authomatically.
* Low voltage warning
When the battery voltage level drops below the present level, the light is programmed to downshift to a lower brightness level until lowest output is reached. When the battery voltage level still drops low under lowest output, it will shut off authomatically.
Intelligent Overheat Protection
Advanced intelligent temperature regulation technology allows MK38 to dynamically adjust output performance according to its body temperature.The light will accumulate a lot of heat when you use it at high-output levels for extended periods. When the light reaches the temperature of 65°C or above, the light will automatically step down its output to reduce the temperature. at the same time we also make more premium cooling fins on flashlight head and built-in duable-row fans to blow effectively these cooling fins through the outside to protect flashlight overheat.
* Note: DO NOT submerge the flashlight into any liquid when it is hot. Doing so may cause irrepareable damage to the light due to the difference of air pressure inside and outside of tube.Note: We also high recommend the oridinary users to purhcase Samsung 40T unprotected flat-top 21700 batteries or Modell P42A unprotected flat-top 21700 batteries to drive MK38.
Battery Installation
1. Loose the tailcap counterclockwise and take it away.
2. As shown in the graph, insert batteries with the positive (+) to connect the glod plated copper positive round conductive plate on tailcap PCB, the nagative (-) to connect the glod plated copper spring on PCB.
3. Tighten the tailcap by aligning the two metal pins on the tailcap with the corresponding holes on the flashlight body, and rotate clockwise.
* Warning: 1. DO NOT mix rechargeable and non-rechargeable batteries
                 2. DO NOT mix batteries of different types/brands
                 3. DO NOT mix batteries of different power levels
                 4. DO NOT mix old and new batteries Battery Voltage Indicator
When the light is turned on, the built-in power indicator under the stainless steel side switch will show different color light to indicate remaining battery voltage: While battery voltage > 10.2V, blue light turn on and last 3s.
While battery voltage 9.6V-10.2V, purple light turn on and last 3s.
While battery voltage 8.7V-9.6V, red light constant-on.
While battery voltage < 8.7V, the light turn off authomatically.
* Low voltage warning
When the battery voltage level drops below the present level, the light is programmed to downshift to a lower brightness level until lowest output is reached. When the battery voltage level still drops low under lowest output, it will shut off authomatically.
Intelligent Overheat Protection
Advanced intelligent temperature regulation technology allows MK38 to dynamically adjust output performance according to its body temperature.The light will accumulate a lot of heat when you use it at high-output levels for extended periods. When the light reaches the temperature of 65°C or above, the light will automatically step down its output to reduce the temperature. at the same time we also make more premium cooling fins on flashlight head and built-in duable-row fans to blow effectively these cooling fins through the outside to protect flashlight overheat.
* Note: DO NOT submerge the flashlight into any liquid when it is hot. Doing so may cause irrepareable damage to the light due to the difference of air pressure inside and outside of tube.How to disassemble the handle?
1.Switch off flashlight and use tag tool (included accessory) to press the quick release screw on the counterbored hole, loose the screw counterclockwise, and then twist out the screw with your hand.
2.Lift up the handle, 4PIN connectors on the handle will take off from the connector socket on flashlight head. then you can place the handle to somewhere.
3. Please insert quick release screw into the connector socket and tighten it. At last please use tage tool (included acccessory) to press the screw to tighten it fully to get a waterproof, and then you can switch on flashlight as usual.
How to install the handle?
1.Switch off flashlight and use tag tool (included accessory) to press the quick release screw on the connector socket, loose the screw counterclockwise, and then twist out the screw with your hand.
2.Lift up the handle, make sure the the counterbored hole align the screw hole on flashlight body and 4PIN connectors on the handle will also align the connector socket on flashlight head.
3.Put the screw through the counterbored hole and make the screw tip into the screw hole on flashlight body, and then take tag tool (included accessory) to press the screw to tighen.
Warning
1. The flashlight is locked out default by us. Please quickly four-click to unlock it for the first use.
2. The flashlight is high-intensity lighting device capable of causing eye damage or other harms, so please avoid shining the light directly into anyone's eyes. 3. The flashlight is recommended use for adult or under adult supervision. Please keep this flashlight away from children.
4. Please take off the dustproof filme from lens immediately for the first use.
5. This flashlight is capable of emitting intense heat when turning on for a long period of time. Remember to install the handle before using. Avoid touching the appearance of the flashlight.
6. DO NOT shine a object at close range, cover the flashlight, or place the head to face down when it is turn on. The heat bilt-up may objects to burn or even result in unexpected disasters.
7. After the cooling fans ON, DO NOT push your fingers into fans and force them to stop working as it will demage the fans.
8. DO NOT immerse the flashlight in seawater or other correosive media as it will damage the flashlight.
9. Please turn the flashlight off and make sure that its lock out if it is left unused, carried or transproted. The heat built-up due to accidental activation may melt the lens of the flashlight, cause close objects to urn, or even result in unexpected disasters.
10. The built-in battery pack is charged to approximately 50% by default and will not support maximum output and maximum runtime.
11. To maintain waterproof rating, please lubricate the o-ring with silicone safe lubricant and replace worn o-rings as needed.
12. Please recharge the product every 4 months when left unused for a prolonged time.
13. DO NOT disassemble or modify this product which can cause damage and will void the warranty.
14. When battery pack are full charged, led indicator will turn OFF. at the same time please don't forget to take off USB Type-C charging cable and close the anti-dust USB cover immediately.
15. After uninstall the handle, please put the quick release screw into the connector socket on the flashlight head and tighten it to get a better waterproof.
16.After discharge as power bank is complete, please don't forget to close the anti-dust USB cover immediately

Fenix HP30R rechargeable headlamp employs power and versatility in rare form and design. The power comes in two forms. First, it is powered by two 18650 rechargeable batteries that allow for convenient extended runtimes in an easy to recharge case that has the unique ability to also charge your other USB rechargeable devices. The other “power” component comes from the sheer brute strength of it’s powerful beam. The 3 unique LED’s can all be used at once to disperse an amazing 1750 Lumens that reaches over 650 feet (200 meters) showing you items in the distance that few would imagine.
The versatility of this headlamp begins with the belt-worn (or backpack) battery case that allows for lightweight and comfortable design on the head. The rechargeable micro USB port in the battery case even allows you to utilize it as a power bank in those moments your cell phone might need a little extra charge. The versatility continues with 4 levels of spotlight and 4 levels of soft floodlight. The unique ability to utilize both flood and spot levels at once provide you 16 levels of adaptable light with runtimes lasting as long as 400 hours. Although the HP30R can be life saving tool to search and rescue professionals; it’s easy to use and affordability make it ideal for adventurists at all levels.

Fenix SD11 diving light is specifically designed for underwater photography and video shooting. The advanced “R+” mode is made for better color rendering with a combination of neutral white LED light and red LED light. R+ mode makes the SD11 an effective light for underwater viewing, photographing, video shooting and even photography on the shore since red light is extraordinarily scarce. Featuring a soft wide beam and R+, SD11 is fit for both illumination and photography on shore or in water. In addition, the 100m waterproof classification, maximum 1000 lumens and low battery warning makes the SD11 perfect for the demands of safe deep diving photography. Easily choose output selection with the magnetic rotating ring while you are diving. The included flashlight clip and camera mount are compatible with most of the sports cameras and DSLRs.
Uses Cree XM-L2 U2 neutral white LED and Cree XQE red LED, with a lifespan of 50,000 hours
Combined output of neutral white and red light -- ideal supplementary lighting for underwater photographing and video shooting
110° super wide beam angle for even and soft lighting effect
Specialized flashlight clip and camera mount for photographing; suitable for most sports and DSLR cameras
Magnetic rotating ring for one-handed operation
Low battery level warning
Illumination design for safe diving
Dual layer body structure; corrosion resistant
Tail cap with big buckle for fast and convenient extraction
Digitally regulated output maintains constant brightness
Reverse polarity protection to protect from improper battery insertion
Made of durable aircraft- grade aluminum
Premium type Ⅲ hard-anodized anti-abrasive finish
Max Lumens: 1000
Max Beam Distance: 148 feet (45 meters)
Max Runtime: 3 hours 40 min.
Lighting Modes: 2 brightness levels, and red
Bulb Type: Cree XM-L2 U2 neutral white LED and Cree XQE red LED
Size: Length: 5.43” (138mm) Diameter: 1.02” (26mm) Head: 1.34” (34mm)
Weight: 4.67 oz. (132.5g) excluding batteries
Battery: One 18650 rechargeable Li-ion batteries or two CR123A Lithium batteries
Included: Flashlight clip & camera mount, diving lanyard, two spare O-rings, brand ring

EN FUSION 2-IN-1 LED STANDING

5 Light Modes
- Turbo (1500 Lumens): 30 Seconds / 64 Meters
- High (750 Lumens): 2 Hours / 35 Meters
- Medium (250 Lumens): 6 Hours / 25 Meters
- Low (10 Lumens): 18 Hours / 8 Meters
- Red Cob (5 Lumens): 12 Hours / 1 Meters
*Runtime Is Reduced By About 20% When Using 2 X Cr123a Batteries

Design
- Compact And Lightweight
- Durable Abs Plastic
- Smart Power Control (Spc)
- Water Resistant (Ipx4)
- Flex Power
- Direct-To-Red

Operation
- Top-Positioned Buttons For Power And Mode Selection

Accessories
- Li-Ion 18650 Rechargeable Battery
- One Size Fits All Head Strap
- Usb Charging Cable

Batteries
- Powered By 1x Li-Ion 18650 2200mah 3.7v Or 2xcr123a Batteries

Specs
- Weight: 45g
- (L) 12.7cm X (W) 5.08cm X (H) 7.62cm

IMALENT MS06 is a can-sized super bright searching flashlight that blasts a max output of 25,000 lumens and a max beam distance of 513 meters. This 25,000 lumens flashlight can be quickly charged with the three included 4000 mAh 21700 Li-ion power batteries via the magnetical USB port. The amount of light that the IMALENT MS06 flashlight emits is truly remarkable, a wide beam angle and strobe function are quite ideal for Search and Rescue. Extremely small for a flashlight with this much power, only 4.68” long plus a flat light body, this flashlight is the perfect tool for exploring and search and rescue. The battery level indicator lets you know the status of your batteries. Additional features include intelligent memory circuit, lockout function and six output levels. Once you see the raw power of a 25,000-lumen flashlight, you will never feel troubled at night adventures, such as searching, caving, patrolling, etc.
PRODUCT DESCRIPTION
.Utilizes 6 pieces of American CREE XHP70 2nd LEDs.The lifespan up to 50000 hours with maximum output of 25,000lumens.
.Powered by three rechargeable 4000mAh 21700 Li-ion batteries
Instant turbo output by double press the power switch button while triple press the power switch button, can get lowest output
.Product size:56(head diameter)*51(body diameter)*119(length)mm
.Net weight：572g(battery included)
.High efficiency constant power circuit will maintain constant brightness.
.Built-in thermal control module will automatically adjust the brightness output according to the working state and outer temperature.
.Combination of toughened ultra-clear mineral and anti-reflective coating glass.
.Aluminum SMO reflector.
.Aerospace-grade aluminum alloy body,wear-resistant Type III hard-anodized surface treatment .
.IPX-8 standard waterproof(2 meters submersible).
.1.5m impact resistant.
.Tail stand capability

SD01 MINI GLOW TANK

FEATURING
* Powered by 1*AAA battery
* Runtime 108 hours
* Size: 77.5(Length)*19mm(Diameter)
* Net Weight:23.5g
* Accessories: O-rings, lanyard, AAA battery incl.
* Available Colors:Blue, Red, Green, White, Orange
* Waterproof underwater 150m(500 feet)

The Baldr IR is a rail-mounted light with a white light LED and a Class 1 eye-safe IR beam. Designed for Picatinny (MIL-STD-1913) and Glock rails, this professional lighting tool is highly durable and provenly recoil-proof. Select the white-light mode and activate with the ambidextrous tail switch, it produces a 1350-lumen or 300-lumen beam with a far-reaching spot and ample soft flood for situational awareness. Select and activate the IR mode, it emits a focused IR beam from the bottom, invisible to the naked eye but perfect for night vision goggles. Powered by two CR123A batteries, the light runs much longer than most products on the market. The nimble swing arm allows you to install and detach it with one hand instantly. The two adjustable screws are used to zero the IR beam accurately. Once set in place, it is hard to go loose or off calibration. Accurate, reliable, and invisible, the Baldr IR gives you a great advantage during stealth night operations.

GENERAL DATA
Beam Distance (ft)
853
Beam Distance (m)
260
Max. Performance (lumens)
1,350
Charge Type
Not Rechargeable
Powered By
2 x CR123A
Light Intensity (candela)
16,900
Light Form
Standard hotspot diameter with impressive distance. The perfect all-around beam profile.
Lens / Reflector Type
TIR Optic Lens
Mode Operation
Ambidextrous Rear Switch
Form/Size Factor
Small Size (car key / Zippo lighter)
Series
Series Baldr (handgun flashlight)
Unique Characteristics
Optimized by a TIR lens, the white beam is up to 1,350 lumens bright and 260 meters far, good for near and far situational awareness.
Commercially available Class 1 eye-safe IR beam sight <0.78mW (850 nm).
The quick mount/detach system matches well with Glock rails (adapter already installed) and Picatinny rails.
Simple mode switch to select White Light, OFF, or IR Beam; popular ambidextrous tail switch to access different outputs.
Powered by two CR123A batteries, the white light runs up to 4 hours, while the IR runs up to incredibly 80 hours.
Calibrated by two adjustable screws. It withstands strong impacts and recoils.
LIGHTING LEVELS
LEVEL 1 (lumens) 
1,350~500~300
Run-time LEVEL 1
1+78+20 minutes
LEVEL 2 (lumens)
300
Run-time LEVEL 2
4 hours
Strobe
Yes
SOS / BEACON
No
TECHNICAL CHARACTERISTICS
Body Material
Aluminum Alloy
Drop Test
1 Meter
Waterproof
IPX4
Weight (g / oz)
129g / 4.55oz
Length (mm / in)
84mm / 3.3in
Head Diameter (mm / in)
36.5mm / 1.44in
Light Source
One High-Performance Neutral White LED
One Class 1 Eye-safe IR Beam Emitter
Packaging
Carton box
Use
Police, Military, Tactical Use
In The Box
BALDR IR (batteries included) x 1; Picatinny (MIL-STD-1913) Rail Mount Adapter x 1; Rail Mount Adapter Screw x 2; H1.5 Allen Wrench x 1; Adjustable Screw x 2; User Manual x 1

Lumen LEVEL 1 - 25000 lumens (1h40min)(3min) LEVEL 2 - 12800 lumens (1h30min)(10min) LEVEL 3 - 6400lm (2h) LEVEL 4 - 3200lm (4h) LEVEL 5 - 1600lm (8h) LEVEL 6 - 800lm (12h) LEVEL 7 - 400lm (19h) LEVEL 8 - 200lm (27h)
Throw LEVEL 1 - 25000 lumens (630m) LEVEL 2 - 12800 lumens (450m) LEVEL 3 - 6400lm (315m) LEVEL 4 - 3200lm (215m) LEVEL 5 - 1600lm (160m) LEVEL 6 - 800lm (115m) LEVEL 7 - 400lm (85m) LEVEL 8 - 200lm (60m)
CD 99200
Waterproof Rating IPX7
LED 6 x Cree XHP70.2
Dimensions Length (mm) 320 Head Diameter (mm) 100 Body Diameter (mm)57
Weight 1855g
Compatible Batteries 6000mAh 14.4V 8x18650 Battery Pack
Included Accessories Flashlight Olight X9R x 1 Carrying Case: Waterproof, dustproof, shock-proof x 1 Shoulder Strap x 1 DC 16.8V 2A Wall Power Adapter x 1 DC 16.8V 1.5A Car Charger x 1 Instruction manual x 1
Battery Life LEVEL 1 - 25000 lumens (1h40min)(3min) LEVEL 2 - 12800 lumens (1h30min)(10min) LEVEL 3 - 6400lm (2h) LEVEL 4 - 3200lm (4h) LEVEL 5 - 1600lm (8h) LEVEL 6 - 800lm (12h) LEVEL 7 - 400lm (19h) LEVEL 8 - 200lm (27h)
MORE INFO

The X9R Marauder is the largest and highest output flashlight ever produced by Olight reaching an incredible 25,000 lumens.

The X9R flashlifght is equipped with six Cree XHP70.2 LED and is powered by a rechargeable battery pack combining eight high discharge rate 18650 batteries.

The custom heat dissipation system ensures that the flashlight provides constant and safe high output settings.

The output settings are controlled through a side switch surrounded by 8 blue indicators on each side displaying your output level, remaining battery capacity, or the charging status.

Ergonomic milled finger grooves ensure a comfortable grip no matter what size hands are holding it.

This high output flashlight is delivered in a large carrying case including a charging cable and comfortable shoulder strap for convenient carry.

The X9R Marauder is the best option for intense output, long runtimes, and sustainable use for years to come.

Highest brightness level Olight ever produced reaching a max output of 25,000 lumens..
Smart output control to prevent overheating - Proximity sensors that drop the output automatically when the flashlight head approaches a nearby object. Active thermal management system that reduces the output when the temperature gets too hot to prevent any damage or overheating.
Battery level display while indicating an 8-level output selection.
Improved built-in heat dissipation system design for more effective cooling of the flashlight body.
Ergonomic design - Milled finger grooves, shoulder strap and concealable strap hole for convenient and comfortable use.
Battery balance - The battery protection board can balance out the power of individual cells to maximize the performance of the entire battery pack and also increase each cell’s longevity.

The Fenix E05R Keychain Flashlight is a great flashlight to carry every day. Less than 3″ long and less than 1″ round, this flashlight only weighs 0.85 ounces (24g) making it a light weight option for your keys, pocket or purse. Four brightness levels are accessed by pressing the side switch, and when you need extra power, hold the switch down for a quick burst of a very bright 400 lumens. The built-in battery can be quickly charged by unscrewing the head to reveal the micro-USB charging port. Built for any situation, the Fenix E05R Keychain Flashlight is built tough, making it impact resistant, dustproof and waterproof. Trust this mini flashlight for your every day needs.

SPECIFICATIONS
Max Lumens: 400
Max Beam Distance: 210 feet ( 64 meters)
Max Runtime: 30 hours
Lighting Modes: 4 brightness levels including Burst mode
Bulb Type: Luminus SST20 Cold White LED
Size: Length: 2.68” (68mm) Head: 0.60” (15.3mm) Body: 0.59” (15mm)
Weight: 0.85 oz. (24g) including battery
Battery: Built-in rechargeable 320mAh Li-polymer battery