A quick, inexpensive substitute for drop cloth. This paper can absorb spills and provide a protective barrier.

Frisket : Masking Film : Roll : 38.1x366cm : Gloss

Frisket : Masking Film : Roll : 38.1x366cm : Matt

Translucent white plastic bottle, with sealable flip top.Ideal for storing water, mediums, mixed colours etc.Capacity: 8oz (250ml)This plastic bottle has a plastic teat measuring 5mm in diameter at the tip and a length of 40mm. The plastic bottle is 137mm in length and 50mm in diameter and a volume capacity of 250ml.

Frisket : Masking Film : Roll : 63.5x366cm : Matt

Frisket : Masking Film : Roll : 25.4x366cm : Matt Original Frisket Film is a new name, but the same product that has been acknowledged as the best by artists and designers since 1970. Until October 1995, when the manufacturing plant was taken over by SimAir, it was distributed by Frisk Products Ltd, and has always enjoyed an enviable reputation for both the quality  and consistency of performance required by discerning professionals.

SimAir continue to use the same specially formated adhesive that gives the low-tack characterics, essential to airbrush artists and others requiring control of colour application. The fine vinyl, in either matt or gloss, cuts cleanly with minimal pressure, thus protecting the work surface to be painted underneath.

An essential tool for airbrush artists, graphic designers and architects, it works on almost all surfaces. Easy to handle, cut, and peel without leaving any residue behind.

XL Crackle Paste is designed for adding textural effects and impasto to artworks on a range of surfaces.

The kit consists of two parts, a white base (primer) and the XL Crackle paste for the top layer. The primer adheres well to materials such as canvas, wood, styrofoam, plastic, glass or metal. It is not suitable for materials made of silicone. The primer adheres perfectly to the crackle paste and can be pigmented before application.

The XL Crackle Paste is a structural paste for the production of cracks, which appear as the paste dries. These cracks are deeper and wider the thicker you apply the XL Crackle Paste - a layer of up to 50mm thick is possible. Paint can be sprayed or painted over the crackle paste after application - please see below for more information.

Base Layer: Component 1 : Base / primer (small container). Apply the white primer paste as a base coat on your surface / substrate. Apply a thin and uniform layer. The primer adheres well to canvas, wood, styrofoam, plastic, glass or metal. It will not bond well to silicone or materials with silicone content.

XL Crackle Paste: The XL Crackle Paste is a structure paste for the creation of cracks. Cracks will appear as the paste dries. The cracks will be deeper and wider the thicker you apply the XL Crackle Paste. A layer thickness up to 50 mm is possible. Adhesion of the XL paste to the Base / primer (component 1) is excellent. Optimum results are achieved at temperatures of 18–25°C.

Tinting the base layer: The Base primer is white by default. When you apply the XL Crackle Paste on top, cracks will appear in the paste and the white colour of the
primer will be visible underneath and show through the cracks. Use regular acrylic paint or acrylic inks as a pigment to get the colour shade you desire.
Simply mix them into the Base primer by adding a maximum of 20% pigment. For example, if you need a total of 100g to prime your painting surface, you can use 80g of primer and 20g of paint (or more primer and less paint). You can introduce more flashy colours by mixing
shimmering pigments into the primer or use EliGlow Photo Luminescent pigment powders to provide a radiance to your crackle art. You are limited only by your own imagination!

Pigmenting the XL Crackle paste: By default the XL crackle paste is beige in colour. The paste itself cannot be coloured before application, but you can still colour your cracks afterwards. You have two options for doing this:
Option A: Spray the XL Crackle Paste with spraypaint immediately after application (i.e. when still wet). The paste will break apart and as it dries and you will obtain coloured cracks.
Option B: Let the XL crackle paste dry, then paint the surface as desired. You can either select individual cracks or paint the entire surface. With this technique take care not to let the paint run into the cracks otherwise you will no longer have a colour contrast

Frisket : Masking Film : 8 Sheet Pack : 25.4x38.1cm : Gloss

Slows the drying time of acrylic paint and allows easy blending of colours.