This Airgun shoots both 4.5 mm BB pellets and 4.5mm Diabolo lead pellets.
Stock - adjustable, ergonomic and impact resistant. The handle profiled at a greater than usual angle improves the comfort and control of the rifle for shooters with smaller hands.
PCA system - designed to inflate and regulate the pressure in the chamber, necessary to start shooting. Typically, 5 to 10 punches are sufficient for recreational shooting.
Fuse - Safe-T-Matic type, activated during pumping, preventing an uncontrolled shot. Before pressing the trigger, it is necessary to release the fuse.
Magazine - for 250 BB pellets. Effective security measures ensure that recreational shooting will be safe.

The Snowpeak Artemis P35 Regulated PCP Bullpup Air Rifle - 5.5mm is an extremely light, compact PCP air rifle in bullpup configuration. Dubbed an upgraded version to the Artemis P15 rifle, this PCP offers a centre position FX style full metal roller side-lever above the pistol grip and trigger. This allows much easier and faster cocking as you need not take your eye off the target.

The smooth, ambidextrous synthetic stock features a comfortable thumbhole for great stability and ease of handling in any weather and is outfitted with a rubber butt-pad and cheekpiece for increased comfort. Also present are the two-stage adjustable metal trigger and a Cross Trigger manual safety.

The appearance of this airgun is very tactical and it has a solid 22mm metal Picatinny rail ready to take any type of scope or red dot optic. The rifle comes with a barrel shroud sound moderator and is not threaded for an additional silencer.

The air cylinder has a capacity of 265CC, delivering massive shots per fill and the pressure gauge is located on the front of the air cylinder. The gauge is spring-loaded and when pulled away, reveals the filling port. This is especially handy to prevent dirt and moisture entering while the rifle is in use or stored. With a fill pressure of 250BAR this bullpup can be filled easily with a cylinder or high pressure compressor.

Features:

• Compact PCP air rifle in bullpup configuration
• Centre position FX style full metal roller side-lever
• Smooth, ambidextrous synthetic stock features a comfortable thumbhole for great stability and ease of handling
• Solid 22mm metal picatinny rail ready to take any type of scope or red dot optic
• Air cylinder has a capacity of 265cc
• Pressure of 250bar

Specification:

• Calibre 5.5mm / .22
• Air Capacity 265CC
• Regulator Yes
• Magazine 9 Shot rotary, removable
• Cocking Mid position FX style roller side-lever, full metal
• Trigger Two-stage adjustable metal trigger
• Trigger Pull 1-5 Lbf
• Safety Manual, Cross Trigger, 1-6Lbf
• Barrel Length 450mm
• Overall Length 675mm
• Max Pressure 250BAR / 25 MPa
• Stock Synthetic, Ambidextrous
• Overall Weight 2.4kg
• Optics Rail 22mm Picatinny

Package includes blades and triggers lanyard

Caution: This product should be used for lawful purposes and handled safely. Follow recommended and appropriate use of ammunition. Using this product for unlawful purposes to cause death or serious bodily harm is an offence.

The Artemis CP2 Camo is actually an air pistol and air rifle in one! The CP2 comes as a pistol with an additional ‘conversion’ set to convert it to an air rifle. This allows you to easily slide/screw the stock to the back of the pistol grip. The barrel can easily be replaced by a longer rifle barrel, which is included.

The Artemis CP2 Camo work on Co2 cartridges (not included)

SPECIFICATIONS
Caliber: 4.5 mm / .177
Power Source: CO2
Pistol:153 – 4.5 mm / .177
Rifle: 183 – 4.5 mm / .177
Cocking System: Bolt Action
Magazine Capacity: 7, 9
Safety: Yes
Weight {g}: 925 {pistol}, 1385 {refile}
Barrel Length {mm}: 210 {Pistol}, 450 {Refile}
Total Length {mm}: 360 {Pistol}, 860 {Refile}
Sights: Open Sights
Mounting Rail: Dovetail {11mm}
Stock: Ambidextrous

Package includes a free Blades & Triggers Lanyard.

CAUTION: This product should be used for lawful purposes and handled safely. Follow recommended and appropriate use of ammunition. Using this product for unlawful purposes to cause death or serious bodily harm is an offence.

Model MOD 125

Model MOD 85

Model MOD 125

The JT Splatmaster Z18 paintball markers are great entry .50 cal paintball markers for for kids. The Z18 is spring powered and primed with the comfortable pump grip. The blaster has an adjustable stock. The magazine holds 25 50cal rounds.

Description:
TR16 MBR 308 M-LOK
40 Round Magazine
Pre-installed mosfet
Wired to Deans
Full Metal Rail and Receiver
Electronic Trigger Unit
Receiver Metal
Rail CNC Hard-Anodizing
Overall Length 940mm
Weight 6.88 lbs
Bushings/Bearings 8mm Ball Bearings
Motor Strong Motor 25000RPM
Battery 9.6v Ni-MH
Inner Barrel Length 6.08mm Brass Inner Barrel 463mm
Hop Up Chamber Plastic Rotary Type
Magazine 40R
Type AEG
Blowback No
Wire 16 AWG
Cylinder Brass
Cylinder Head Aluminum
Piston Head Plastic
Electronic Trigger Yes
Mosfet Yes
Spring Guide Ball Bearing
Package Includes Manual, Jamming Rod, Mini Catalog, Magazine

ASG Dan Wesson Revolver 715 4inch Silver 4.5mm - 18612Product without Variants
Length:242mm/9,7inch
Barrel Length:80mm/3,1inch
Mag. Capacity:6 Rounds
Hop up type: None
Weight:1060gr/2,3lb

CAUTION: This product should be used for lawful purposes and handled safely. Follow recommended and appropriate use of ammunition. Using this product for unlawful purposes to cause death or serious bodily harm is an offence.

This NiMH battery pack, is recommended for standard AEG’s, and will fit inside most AEG’s with small tube shaped battery compartments.

A NiMH battery offers you a hassle free, reliable and robust power source.
They offer a flatter discharge rate, than traditional batteries, Providing a stable rate of fire during their use. Other advantages of NiMH batteries are, that they don’t need to be completely discharged before charging. And they can be rapidly charged in as little as one hour.
It is recommended that the battery, be fully discharged once in a while to keep the battery at peak performance.
ASG’s many NiMH batteries are all ROHS certified. Each cell, as well as each pack, have been tested for voltage, capacity and internal resistance, to ensure that they comply with the high performance standard, airsoft users request and deserve.

The L85 series has a unique bullpup design where the bolt group and magazine are placed in the stock behind the trigger. This design allows the weapon to be shorter and lighter than a conventional rifle design, while keeping the same barrel length and effective range. These advantages improve the maneuverability in narrow spaces while retain with the same power and accuracy needed for open field battles. Gun length 786.5mm .Barrel length 480mm .Weight 3652g. Battery type 9.6v mah or 11.1v li-po connector size small connector mag. Capacity 450 motor axle short spring m120 material full metal.

CAUTION: This product should be used for lawful purposes and handled safely. Follow recommended and appropriate use of ammunition. Using this product for unlawful purposes to cause death or serious bodily harm is an offence.

Features:

• Manual loading, side lever action, pre-charged pneumatic (PCP) air rifle.
• Detachable 12-shot magazine in 5.5mm Fully shrouded, precision rifled, and choked barrel for accuracy.
• ½” UNF threaded muzzle for a sound moderator.
• Genuine Turkish high-grade walnut ambidextrous stock with thumbhole.
• Elevation adjustable comb and Picatinny rail beneath the forearm.
• Elevation & cast adjustable rubber butt pad. 480cc carbon fibre air bottle.
• Spare magazine carrying slot in the stock for 1 spare magazine.
• Includes 2 magazines and quick-fill nozzle.
• Picatinny rail milled receiver for both 11mm and 22mm scope mounts.
• Overall blued finish, black anodized receiver.
• Manual Safety.
• Patented anti-knock system to prevent gas wastage when the rifle is knocked or bounced.
• Quattro Trigger: 2-stage full adjustable match trigger for trigger travel and trigger load.
• Gold plated metal trigger & metal trigger guard Model Nova Star calibre 5.5mm

CAUTION: This product should be used for lawful purposes and handled safely. Follow recommended and appropriate use of ammunition. Using this product for unlawful purposes to cause death or serious bodily harm is an offense.

The receivers of the M.A.R.S. are machined by CNC milling process, giving it an aggressive look and geometrical surfaces, a design that complies with the standards of AR-15 components. The logo is made by an expert laser engraving technique. All components are made in Taiwan. Lightweight Keymod Hand guard The MARS Lightweight Keymod Handguard is a modern-looking design built in high-quality aluminum alloy and engineered to handle the hardest and most demanding use of tactical and competitive shooting. It is also CNC machined and coated by hard anodizing for added durability Ambidextrous Controls the ambidextrous selector lever and magazine release button are convenient for both right-handed and lefthanded players. This ambidextrous design will be found extremely handy in those unpredictable situations.EBB System The ICS EBB (Electric Blow Back) system increases the realistic feeling of a real firearm without reducing durability and shooting accuracy.? Lightweight Keymod Hand guard ICS Split Gearbox QD Spring Guide One-piece Metal H-UP Chamber EBB System Integrated MOSFET Safety to Release Spring Function

G&Gs new ETU includes technology that will automatically stop the gun from operating if it detects the battery voltage is too low. Once you disconnect the battery it will likely still operate in guns without this technology, as those products will allow the battery to drain completely flat. Velocity Feet Per Second (FPS): 1 Joule G & G reference: G2H-016-WHL-BNB-NCM Body: Metal Handguards: CNC metal - Hard anodized Total length: 920mm · Weight: 3090g Bearings: 8mm Motor: 25000rpm Cannon internal: Aluminum 463mm (diameter 6.08mm) Hop Up Chamber: Rotary type plastic Type: AEG Blowback: No Electronic trigger: Yes MOSFET: Yes

G&G Cobalt Kinetics BAMF Stealth
9.5 inch polymer M-LOK rail with iconic BAMF styling
Uniqued cobalt kinetics designed receiver in G&G polymer
Version 2 G2 gearbox with quick change spring
Pre-installed MOSFET and electronic trigger unit (E.T.U.) with empty magazine cut-off
Fully abidextrous controls, including selector switch, charging handle, and magazine catch
Includes 90R auto-drop advance magazine (ADAM)
Includes GOS-V9 PDW stock

Blow Back: Yes
Hop Up: Yes
Weight: 770 g
Length: 220 mm
Material: Polymer
Magazine: 22rds
Spare magazine: EG08-167

Specifications:

- Blow Back: NO
- HOP UP: YES
- Weight: 2000 g
- Length: 497 mm
- Body: Reinforced Polymer
- Bearings: 8 mm
- Inner Barrel: 128 mm 6.08mm
- FPS: 335-350
- Magazine: 300 Rounds
- Battery: 7.4v not included
- Spare magazine: EG08-159

Material: Polymer / Metal / Aluminum
Motor: Ifrit 25K Motor-Long Axis orange (25000rpm) *Lower RPM motor will be installed based on local regulations on velocity.
Gear box bearing: Ball Bearing Bushing- 8x3x2.5mm (G2 Gearbox only)
Inner Barrel Length: 128 mm
Magazine: 68 Rounds
Overall Length: 582.5mm
Weight: 1940g
Electronic Trigger: Yes
MOSFET: Yes

The G&G GR4 G26 femme fatal combat machine GR4 AEG is the perfect balanced rifle between performance and manoeuvrability. This M4 variant has polymer furniture that makes this a very lightweight but durable rifle. Also equipped is an ergonomic handguard with a top receiver rail, which gives players ample amount of mounting space for an aftermarket accessory. The CQB length of the rifle also makes it easy to manoeuvre around corners. Internally, G&G has equipped the GR4 with an 8mm reinforced Version 2 gearbox with steel gears, ported piston head, and a polycarbonate piston to make this a very well rounded reliable gearbox. This rifle is internally and externally built perfect for any type of airsoft player. Features: – Polymer receivers – 8mm reinforced gearbox – CQB-style design – Upper rail system – Retractable stock – Electric Blowback – Integrated front rail folding sight – Ergonomic furniture Specifications: Operation: Electric Automatic Build: Polymer Upper & Lower Receiver, Stock, Grip Firing Modes: Semi-automatic and Full-automatic, w/ Functional Safety Muzzle Velocity: 330 – 350 FPS (w/ 0.20g BBs) Gearbox: 8mm Metal Version 2 Magazine: 300rd High Capacity (gear wind-up) Battery: 8.4V Nunchuck (not included) Inner Barrel Length: 260 mm Inner Barrel Diameter: 6.08 mm Hop-Up: Adjustable Weight: 5.4 pounds Overall Length: 27.5″ in. / 31″ in. (Retracted / Extended) Ammo type: Seamless 0.20g or heavier (0.23g, 0.25g, 0.26g, 0.28g, etc) BBs. For maximum performance and accuracy. Color: Black/purple

G&G SSG-1 USR-BLUE Airsoft Rifle EGC-SSG-USR-INB-NCMProduct without Variants
Elevate your airsoft gameplay with the G&G EGC-SSG-USR-BNB-NCM SSG-1 USR Airsoft Rifle. Designed for precision, power, and versatility, this high-performance airsoft gun is a game-changer on the battlefield. Whether you’re a seasoned pro or a beginner looking to step up your game, the SSG-1 USR delivers unrivaled performance and reliability.

The G&G SSG-1 USR is built to last, with a robust construction that can withstand intense skirmishes and rough handling. Its ergonomic design ensures a comfortable grip, allowing for prolonged use without fatigue. Dominate the competition with confidence as you wield this exceptional airsoft rifle in your hands.

At the heart of the SSG-1 USR lies an innovative internal system, featuring a high-quality gearbox and a precise hop-up mechanism. Experience consistent and accurate shots with each pull of the trigger, giving you a decisive advantage over your opponents. The adjustable hop-up allows you to fine-tune your shots for maximum range and precision, making it ideal for various engagement scenarios.

Model: SpeedFire1250

Specifications:

Operation: electric automatic
Construction: nylon polymer frame / metal barrel assembly
Firing Modes: semi-automatic, full-automatic and functioning safety
Magazine: 130 round high speed mid-capacity magazine
Battery: 11.1v stick Lipo recommended (battery and charger not included)
Handguard Length: 11.5 inches
Thread Direction: 14mm CCW
Inner Barrel Diameter: 6.03mm
Overall Weight: 4.3 lbs
Color: Black

Features:

This newest line of Lancer Gen 3 is the same LT-25 that you love except it now comes preinstalled with a red dress up kit to spice up the look of the rifle from the factory
The Lancer Tactical Gen 3 is Lancer Tactical's newest innovation.
Majority of the internal parts will be similar to Lancer Tactical's Proline series AEGs with a few new features and upgraded parts.
The Gen 3 is a high strength full polymer AEG construction that is very lightweight, yet extremely durable.
Lancer's Gen 3 uses a new built-in zion arms fully programmable electronic trigger unit that can be programmed to shoot in varying burst modes.
Paired with the Lancer fast trigger the Gen 3 are going to be shooting a barrage of BBs down range.
Unlike the Gen 2, the Gen 3's are now equipped with a deans connector that helps with saving more space for higher capacity batteries.
The Gen 3s come out of the box shooting at around 380 - 400 FPS but we have also included a low FPS spring right in the box.
This allows the users to be able to switch their springs on the fly with Lancer Tactical's quick change spring system that is accessed through the buffer tube.
Reinforced metal Gen 2 gearbox with ultra smooth 8mm ball bearings, 18:1 steel gear set, steel teeth polycarbonate piston, bearing spring guide, rotary hop-up, 19,000 RPM high torque motor for consistent performance.
The Lancer Tactical Gen 3 now comes with a high speed 130 round mid capacity magazine that ensures proper feeding and helps prevents jams.
The polished 6.03mm tightbore inner barrel improves range and accuracy.
Full length 20mm top picatinny rail that allows users to mount optics, lights, lasers, and PEQ boxes.
Upgraded flip-up front and rear iron sights with quick deploy release.
Lightweight polymer free float M-LOK rail handguard with ample space for M-LOK attachments.
Retractable stock adjusts to meet comfort of any battle situations.

Features:

• Calibre 5.5MM
• Barrel Overall Length: 550MM
• Snow Peak M25 PCP speed 900fps/Cal 5.5 1.03g pellets
• Magazine Overall Capacity: 10
• Overall Trigger Pull: 0.5-5Lbf
• Safety Force :Adjustable & manual,1-6Lbf
• LWH 123018565MM
• Overall Weight: 3.8/4.0kg.
• Picatinny rail
• Bolt-action cocking lever
• Two-stage adjustable trigger
• Large overall capacity air tube
• Very powerful

Package includes free blades and triggers landyard

CAUTION: This product should be used for lawful purposes and handled safely. Follow recommended and appropriate use of ammunition. Using this product for unlawful purposes to cause death or serious bodily harm is an offence.

The Duty One is fully licensed by the famous high-end small arms manufacturer, STI® International, based in Texas, USA. The pistol is semi-automatic Gas blow-back and based on the classic model 1911 but STI® has upgraded and changed the design and many of the functions. The frame has an integrated front waiver rail for mounting light and laser. The grip is marked with STI® logo and the high rise beavertail grip secures a perfect hold on the pistol. The BB’s are stored in the drop-out magazine and powered by a 12g Co2 capsule which is cleverly kept away in the pistol grip thanks to the easy load system. The pistol has a unique serial number and the metal slide has the authentic STI® logo engraved. Specification Length: 220mm/8,8inch Barrel Length: 115mm/4,6inch Mag. Capacity: 16 Rounds Standard mag: 16723 Hop up type: Adjustable Weight: 820gr/1,8lb CAUTION: This product should be used for lawful purposes and handled safely. Follow recommended and appropriate use of ammunition. Using this product for unlawful purposes to cause death or serious bodily harm is an offence.

Crosman Rifle Company is an American manufacturer and supplier of shooting sports gear, was founded in 1923. They are the manufacturer of popular Air guns, air rifles, pellets, and BB guns. They also produce a large and diverse variety of airsoft ammunition co2 cartridges. Moreover, Crosman Company sells licensed and branded sports gear and products and airsoft guns.

Today the company has more than 300 employees domestically. They are one of the leaders in the world of the air gun industry. In fact, Crosman is the designer and producer of copperhead ammunition, premium quality Benjamin pellets rifles, and air guns and pistols.

DESCRIPTION

DPMS SBR FULL AUTO COMPACT 4.5MM – BB RIFLE is an accurate CO2 replica of an AR-15/M4 platform that fires 25 BBs in either semi or full automatic mode at 1400 rounds per minute and can be stripped down just like a typical AR. Crosman started with a DPMS PDW (Personal Defense Weapon) and added other tactical features like an angled foregrip, BUIS (Backup Iron Sights), and a mock suppressor while preserving the fully-functioning controls and features of a real AR.

SPECIFICATIONS
Over 1400 rounds per minute!
Blowback action
Adjustable 6 position buttstock
AR compatible pistol grip
Quad Rail forearm for accessory mounting
Unique muzzle end cap
25 round drop-out magazine
Flip-up back up iron sights (BUIS)
Angled foregrip
Realistic weight and functions

Package includes a free Blades & Triggers Lanyard.

CAUTION: This product should be used for lawful purposes and handled safely. Follow recommended and appropriate use of ammunition. Using this product for unlawful purposes to cause death or serious bodily harm is an offence.