Metal Foil Embossing and Engraving Tools

The pointed and blunt stylus are for drawing, the flat spatulas are for flattening and the curved tool ends are for raising metal.

This General Purpose Template stencil from Jakar features a range of geometric shapes including circles, squares, hexagons and triangles in an assortment of different metric sizes ranging from 2-38mm. It is made from a durable but flexible green IMA (impact modified acrylic). The pencil allowance is 0.4445mm on all openings and the thickness of the stencil measures 0.76mm.The size of the stencil measures 15.5cm x 12.1cm

Metal Foil Embossing and Engraving Tools

The pointed and blunt stylus are for drawing, the flat spatulas are for flattening and the curved tool ends are for raising metal.

This Jakar Combo Circles Template has a scale ranging from 2mm-39mm. From 2mm-15mm there are circles which go up in 0.5mm increments, between 15-39mm the circles increase by 1mm - the template features 50 circles in total. A versatile technical drawing tool which would be useful for many different drawing projects, from architectural drawings to students and pattern designers. The stencil is made from a durable, flexible green IMA (impact modified acrylic) and is approximately 0.75mm thick. There is a .4445mm pencil allowance on all openings.The entire stencil measures 183mm x 208mm (7.20 x 8.19 inches)

This Jakar Isometric Ellipse Master Template features ellipses ranging from 2mm-35mm at their widest point. A techincal drawing tool which would be useful for diagrams or plans, as well as architectural drawings. The stencil is made from a durable, flexible green IMA (impact modified acrylic) and is approximately 0.75mm thick. There is a .4445mm pencil allowance on all openings. The stencil also has a cm rule along one edge. The entire stencil measures 255mm x 125mm (10.04 x 4.92 inches)

This Jakar Metric Circles Template has a scale ranging from 2mm-30mm. From 2mm-10mm there are circles which go up in 0.5mm increments, between 10-30mm the circles increase by 1mm - the template features 41 circles in total. A versatile technical drawing tool which would be useful for many different drawing projects, from architectural drawings to students and pattern designers. The stencil is made from a durable, flexible green IMA (impact modified acrylic) and is approximately 0.75mm thick. There is a .4445mm pencil allowance on all openings. It has a mm rule along one edge of the stencil.The entire stencil measures 216mm x 126mm (8.5 x 4.96 inches)

Similar to the white stencil brushes but the black bristle is slightly coarser. A wide range of sizes for the stenciller.

Similar to the black stencil brushes but the white bristle is slightly less coarse. A wide range of sizes for the stenciller.

Metal Foil Sheets for Embossing and Tooling

Thin sheets of copper anodized aluminium (one side copper / one side silver) or pure copper (a medium-heavy foil, 6-7 times thicker than household foil) are a traditional thin sheet metal for tooling and embossing. This pure, soft metal takes high detail from tools, easily cuts with a scissors & can be drawn on, embossed or stamped to create raised designs. This great malleability allows you to easily get bas-relief depictions using the repoussage techniques of embossing and engraving. The copper/aluminium sheets come in sizes 10x15cm, 15x30cm, 30x30cm. The pure copper sheets come in sizes: 10x15cm, 20x30cm, 30x40cm.

Similar to the white stencil brushes but the black bristle is slightly coarser. A wide range of sizes for the stenciller.

This Jakar Female Human Figure Template features five different scales, 1:20, 1:25, 1:75, 1:100 and 1:1.25 that enables you to accurately draw female figures in a range of four different postures. A techincal drawing tool which would be useful for architectural drawings or students. The stencil is made from a durable, flexible green IMA (impact modified acrylic) and is approximately 0.75mm thick. There is a .4445mm pencil allowance on all openings.This stencil measures 212mm x 148mm (8.35 x 5.83 inches)

Set contains:

1 worktop with felt.

2 engraving tools for embossing.

12 copper anodized aluminium plates (10x15cm).

The blend of filaments used to to create Gold Nylon brushes is specially selected to ensure excellent snap, fine points and sharp edges. These brushes are extremely durable and easy to clean.

The HOT PEN is used to cut MYLAR to employ stencil designs. It is fitted with a standard UK plug to work directly off mains supply. The fine tip is perfect for cutting intricate patterns. Replacement tips available under product code HPT.

Similar to the white stencil brushes but the black bristle is slightly coarser. A wide range of sizes for the stenciller.

Similar to the white stencil brushes but the black bristle is slightly coarser. A wide range of sizes for the stenciller.

Use Mylar sheets to create your own stencils. It is a transparent film that is very flexible and good for bending around corners. We recommend using a Hot Pen to cut out your required patterns.Alternatively, you can use a craft knife or scalpel. Mylar is flexible like a thick piece of paper, washable, reusable, semi-transparent and suitable for use with all types of paint, including spray paint.

Metal Foil Embossing and Tooling Set

Plastic case containing everything you need to model copper foil. Contents: 4 embossing tools, 12 sheets of copper anodized aluminum foil 10x15cm (one side copper / one side silver), 1 piece of high-density felt 10x15cm, and instruction leaflet.

Metal Foil Sheets for Embossing and Tooling.

Thin sheets of pure copper (a medium-heavy foil, 6-7 times thicker than household foil) are a traditional thin sheet metal for tooling and embossing. This pure, soft metal takes high detail from tools, easily cuts with a scissors and can be drawn on, embossed or stamped to create raised designs.

This great malleability allows you to easily get bas-relief depictions using the repoussage techniques of embossing and engraving.

The pure copper sheets come in sizes: 10 x 15cm, 20 x 30cm, 30 x 40cm.

Use Mylar sheets to create your own stencils. It is a transparent film that is very flexible and good for bending around corners. We recommend using a Hot Pen to cut out your required patterns.Alternatively, you can use a craft knife or scalpel. Mylar is flexible like a thick piece of paper, washable, reusable, semi-transparent and suitable for use with all types of paint, including spray paint.

This Jakar Even Ellipse Template features 20º, 30º, 40º, 50º and 60º ellipses ranging from 5mm-25mm at their widest point. A techincal drawing tool which would be useful for diagrams or plans, as well as architectural drawings. The stencil is made from a durable, flexible green IMA (impact modified acrylic) and is approximately 0.75mm thick. There is a .4445mm pencil allowance on all openings.The entire stencil measures 278mm x 152mm (10.94 x 5.98 inches) 

Similar to the black stencil brushes but the white bristle is slightly less coarse. A wide range of sizes for the stenciller.

Memento™ dye ink is fast drying and fade resistant. The innovative pad delivers finer impressions and exceptionally even coverage.

Use Mylar sheets to create your own stencils. It is a transparent film that is very flexible and good for bending around corners. We recommend using a Hot Pen to cut out your required patterns. Alternatively, you can use a craft knife or scalpel. Mylar is flexible like a thick piece of paper, washable, reusable, semi-transparent and suitable for use with all types of paint, including spray paint.

Metal Foil Embossing and Engraving Tools

The pointed and blunt stylus are for drawing, the flat spatulas are for flattening and the curved tool ends are for raising metal.