The Spark Plug 21mm x 1/2" Drive CRV is a spark plug socket designed for use with a 1/2" drive ratchet or wrench. The 21mm size refers to the socket's internal diameter, which is specifically sized to fit standard spark plugs. Made from CRV (Chrome Vanadium) steel, this socket is durable, resistant to wear, and provides high torque capabilities. It is commonly used for installing and removing spark plugs in automotive engines and other small engine repairs. The 1/2" drive ensures compatibility with most standard ratchets or breaker bars.

Alternator (Freewheel) Socket & Bit set 13 Piece
Allows for easy removal of over running alternator pulley either on or off the vehicle.
Insert allows alternator shaft to be held while the pulley retainer is removed with the key nut.
Contents:
Combined Socket Bits: 1/2" Drive: Male-Star - T50-33T x 113mm,
Combined Socket Bits: Spline - M10-33T x 113mm, Spline - M10-33T x 113mm
Spline Adaptors: 15mm x 33T, 22mm x 33T
Hex Adaptor: 22 x 28mm
Round Adaptor: 35mm-4 pin
Bits: 10mm Hex Drive; Male-Star - T40, T50, Spline - M8, M10, Hex - H8, H10
Adaptor: 1/2" Drive x 10mm Hex
For use on: Alfa Romeo, Audi, BMW, Citroen, Fiat, Mercedes Benz, Mitsubishi, Renault,
Seat, Skoda, Vauxhall/Opel, Volvo, VW, Audi, Porsche, Ford etc...

Combination Wrench 22mm
European slimline type
Size : Metric
15° open ended angle
15° ring end offset from shaft
12 point ring
Thin design
Polished and chrome plated finish
Size (mm): 22
L (mm): 265
Weight (g): 225

Combination Ratchet Ring Flat Wrench
Professional Duty, chrome vanadium
Double heat treated for extra strength and extended life
Slimline Design
Thin walled to allow access to confined spaces
Cold stamped
72 Teeth Ratchet

Size (mm): 13
L (mm): 180
Weight (g): 90

Ring Offset Combination Wrench 
Heavy Duty, Chrome Vanadium
Double heat treated for extra strength and extended life
Cold Stamped
Polished Thin walled rings with 75 degree offset
Slimline design to work in confined spaces
Ring and open end same size
Size (mm): 23
Length (mm): 320
Weight (g): 360

Combination Wrench 16mm
European slimline type
Size : Metric
15° open ended angle
15° ring end offset from shaft
12 point ring
Thin design
Polished and chrome plated finish
Size (mm): 16
L (mm): 205
Weight (g): 111

Combination Wrench 21mm
European slimline type
Size : Metric
15° open ended angle
15° ring end offset from shaft
12 point ring
Thin design
Polished and chrome plated finish
Size (mm): 21
L (mm): 255
Weight (g): 203

A Socket Adaptor 1/2"F x 3/4"M is a tool accessory designed to convert a 1/2-inch female drive into a 3/4-inch male drive. It allows compatibility between different socket sizes, enabling the use of 3/4-inch drive sockets with a 1/2-inch drive ratchet or power tool. Made from durable materials like chrome vanadium steel, it ensures strength and longevity.

The Socket Adaptor 3/4"F x 1/2"M is a high-quality, durable tool designed to convert a 3/4" female drive to a 1/2" male drive, allowing for the use of 1/2" drive sockets with a 3/4" drive tool or ratchet. Made from robust materials, this adaptor ensures a secure and reliable connection, enabling you to use different socket sizes with ease. It's perfect for automotive, mechanical, and general maintenance tasks where a 1/2" socket is needed but only a 3/4" drive tool is available. This adaptor is a must-have for enhancing the versatility of your toolset.

King Tony Power Bar (3/4" x 450mm)

Torque Wrench
Square Drive: 1/4"
Torque Range Nm: 5-25
Overall Length (mm): 280
Weight (g): 850
A high quality torque wrench which is best used in light automotive, industrial and engineering applications
Calibrated to within 3% Supplied with Calibration Certificate
Durable construction
Blow mold case


1/4" Torque Wrench Repair Kit

The 9mm 1/2" Drive Deep Socket CRV 12 Point is a durable socket designed for use with a 1/2-inch drive ratchet or wrench. Made from chrome vanadium (CRV) steel, it provides strength, toughness, and resistance to wear and corrosion. The 12-point design allows for better grip and greater flexibility when attaching to fasteners, reducing slippage. The deep socket enables easy access to recessed bolts or nuts in tight spaces, making it ideal for automotive, mechanical, and general repair applications.

King Tony Socket Deep 6P (1/2" x 19mm)

King Tony Socket Deep 12P (1/2" x 30mm)

King Tony Socket Standard 12P (1/2" x 21mm)

Combination Wrench 15mm
European slimline type
Size : Metric
15° open ended angle
15° ring end offset from shaft
12 point ring
Thin design
Polished and chrome plated finish
Size (mm): 15
L (mm): 195
Weight (g): 93

King Tony Socket Deep 6P (1/2" x 13mm)

Combination Ratchet Ring Flat Wrench
Professional Duty, chrome vanadium
Double heat treated for extra strength and extended life
Slimline Design
Thin walled to allow access to confined spaces
Cold stamped
72 Teeth Ratchet

Size (mm): 24
L (mm): 325
Weight (g): 470

King Tony Socket Set In Eva Foam (17 Piece) (1/4")

Combination Ratchet Ring Flat Wrench
Professional Duty, chrome vanadium
Double heat treated for extra strength and extended life
Slimline Design
Thin walled to allow access to confined spaces
Cold stamped
72 Teeth Ratchet

Size (mm): 21
L (mm): 285
Weight (g): 340

Kaufmann - 30cm Adjustable Wrench - Green

Bulk Pack x 2 Kaufmann Pipe Wrench Ridgit Type 350mm

A 17mm 1/2" Drive Deep Socket CRV 12 Point is a durable, high-quality socket designed for use with a 1/2-inch drive ratchet or wrench. Made from chrome vanadium (CRV) steel, it provides strength and resistance to wear. The deep design allows for easier access to bolts or fasteners that are recessed or deeper in place. The 12-point socket ensures a better grip on fasteners, providing more torque and preventing rounding. Ideal for automotive and mechanical applications.

The 13mm 1/2" Drive Deep Socket CRV 12 Point is a high-performance socket designed for use with a 1/2-inch drive ratchet or wrench. Made from chrome vanadium (CRV) steel, it offers exceptional strength, durability, and resistance to wear. The 12-point design provides a secure and versatile fit on fasteners, reducing slippage and offering greater flexibility in hard-to-reach areas. The deep socket allows access to recessed or deep-set bolts or nuts, making it ideal for automotive, mechanical, and general repair tasks.

The Ratchet 250mm 1/2" Drive with a Steel Handle is a sturdy and reliable tool designed for fastening and loosening bolts and nuts with ease. The 250mm length provides excellent leverage for high-torque applications, making it ideal for automotive, mechanical, and heavy-duty tasks. The 1/2" drive ensures compatibility with a wide range of sockets, while the steel handle offers durability and strength for extended use. This ratchet is perfect for professionals and DIY enthusiasts who require a tool that provides both comfort and power for efficient fastening and unfastening.