|
|
Outdoor > Camping > Lighting > Torches
Size:
Tail Adapter: 1” (26.5mm) x 1.3” (32mm)
Thread: Tr24 x 1.5mm
Cable Length: 9.1” (23cm)
Overall Length: 13.4” (34cm)
Weight:
1.4 oz. (40g)
Material:
Cable: PU material
Tail Adapter: T6-grade aluminum
Compatible with:
TK26R
Noiseless pressure pad switch with a lifespan of 100,000 activations
Tactical round switch for momentary-on/constant-on
Tail adapter is made from T6-grade aluminum, type III hard-anodized anti-abrasive finish
Cable made from resilient PU material
IP68 rated dustproof and waterproof underwater to 2m.
BATTERY OPTION:
1. Internal battery with side USB charging
2. 3x 21700 battery in magazine (no charger)
3. 3x 21700 battery in magazine (Incl TF TR-018 charger)
Features
LED OPTION
- Option1: Utilizes 8x CREE XHP70.2 LEDs (6500K) with a max output of 41,500 lumens
Maximum beam intensity of 160,000 cd, and maximum throw distance of 800 meters
- Option2: Utilizes 8x CREE XHP70.2 LEDs (5000K) with a max output of 39,425 lumens
Maximum beam intensity of 144,400 cd, and maximum throw distance of 760 meters
- Option3: Utilizes 8x LUMINUS SFT40 LEDs (6500K) with a max output of 20,000 lumens
Maximum beam intensity of 360,000 cd, and maximum throw distance of 1,200 meters
Integrated precision digital optics technology provides extreme reflector performance
Utilizes dual-sided AR coated, 99% transmittance toughened glass lens
A step-down constant current circuit design with an efficiency rate up to 98%
Buil-in 10.8V / 4200mAh li-ion battery pack (made by 3x 3.6V/4200mAh 21700 battery cells) or
Power by 3x high drain 21700 batteries
Fast USB Type-C charging with discharging function available (not in 3x 21700 battery option)
Build in battery Features
1.8 hours for full charging, 1.5 hours for full charging over 90%
Built-in intelligent adaptive charging and discharging function and protocols of QC3.0 & PD3.0
With advanced intelligent temperature regulation module, MK38 regulates its output and adapts to the ambient environment, maintaining optimal performance
Electronic reverse polarity protection and over-discharge protection
Integrated power indicator under the side switch indicates remaining battery voltage
Integrated indicator near USB-C port indicates the status of charging & powerbank discharging
Multi-switches design, clear division:
- Stainless steel side switch control the light to turn on/off and change modes etc
- Front switch on handle control 2x waterproof cooling fans to turn on/off
- Rear switch on handle control the light to turn on/off and change modes etc
User interface is simple and friendly, easy one-hand operation:
- From OFF, long press to ECO modes.
- From OFF, single press to General modes.
- Double click to Turbo from any modes (except LOCK-OUT)
- From OFF, quick triple click to Special modes (Strobe / Beacon / SOS to select)
- From OFF, quick quadrple click to lock-out the light
CNC machined from durable aircraft-grade aluminum alloy
Surface finish (option): Premium type-III hard-anodized or Micro-arc oxidation
Stainless steel strike bezel is used to break windows in an emergency situation
Triple-interface on flashlight head: Stainless steel side switch, UNC1/4" triple hole, waterproof 4PIN connector socket
Built-in UNC1/4" tripod hole, MK38 can be directly mounted to a tripod, turning it into a camp light or a fixed supplementary light
Utilizes stainless steel side switch with CD pattern surface for good touch feelings
Detachable handheld handle meets various lighting demands
Triple-sided premium cooling fins improve heat dissipation performance
Built-in double-row cooling fans on the handle to blow effectively cooling fins through outside
Convenient tail-stand capacbility
IPX-7 waterproof standard (1 meters under water)
Impact resistant to 1 meter
What's package Included?
1x Manker MK38 flashlight (built-in battery pack or 3x 21700 as per top selection)
1x Detachable handle
1x USB Type-C cable (build in battery option)
1x Super charging adapter (Plug option: European) (build in battery option)
1x Quick release screw
1x Stainless steel tag tool
1x Lanyard
1x User manual Technical Data
MK38 with 8x CREE XHP70.2 LEDs 6500K:
Modes/Level Luminance Runtime
Turbo mode - Turbo level (Thermal regulation): 41,500 lumens 1 hours 30 minutes
General mode - High level (Thermal regulation): 20,000 lumens 1 hours 40 minutes
General mode - Mid3 level (Thermal regulation): 10,000 lumens 1 hours 50 minutes
General mode - Mid2 level: 5,000 lumens 2 hours 20 minutes
General mode - Mid1 level: 2,200 lumens 5 hours
General mode - Low level: 1,000 lumens 10 hours
ECO mode - L4 level: 400 lumens 20 hours
ECO mode - L3 level: 180 lumens 28 hours
ECO mode - L2 level: 80 lumens 50 hours
ECO mode - L1 level: 40 lumens 66 hours
Special mode - Strobe: 25,000 lumens -
Maximum light intensity: 160,000 cd
Maximum beam distance: 800 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
MK38 with 8x CREE XHP70.2 LEDs 5000K:
Modes/Level Luminance Runtime
Turbo mode - Turbo (Thermal regulation): 39,425 lumens 1 hours 30 minutes
General mode - High level (Thermal regulation): 19,000 lumens 1 hours 40 minutes
General mode - Mid3 level (Thermal regulation): 9,500 lumens 1 hours 50 minutes
General mode - Mid2 level: 4,600 lumens 2 hours 20 minutes
General mode - Mid1 level: 2,090 lumens 5 hours
General mode - Low level: 950 lumens 10 hours
ECO mode - L4 level: 400 lumens 20 hours
ECO mode - L3 level: 180 lumens 28 hours
ECO mode - L2 level: 80 lumens 50 hours
ECO mode - L1 level: 40 lumens 66 hours
Special mode - Strobe: 23,750 lumens -
Maximum light intensity: 144,400 cd
Maximum beam distance: 760 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
MK38 with 8x LUMINUS SFT40 LEDs 6500K:
Modes/Level Luminance Runtime
Turbo mode - Turbo (Thermal regulation): 20,000 lumens 2 hours
General mode - High level (Thermal regulation): 10,000 lumens 2 hours 15 minutes
General mode - Mid3 level (Thermal regulation): 5,000 lumens 2 hours 30 minutes
General mode - Mid2 level: 2,500 lumens 3 hours
General mode - Mid1 level: 1,300 lumens 6 hours
General mode - Low level: 650 lumens 12 hours
ECO mode - L4 level: 320 lumens 22 hours
ECO mode - L3 level: 160 lumens 33 hours
ECO mode - L2 level: 80 lumens 50 hours
ECO mode - L1 level: 40 lumens 66 hours
Special mode - Strobe: 12,000 lumens -
Maximum light intensity: 360,000 cd
Maximum beam distance: 1,200 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
More information, please check the table on the photo as belows:
(* Note: You can open this photo in new tab on your Google chrome to enlarge.). Note: The front switch on the handle can turn on/off the cooling fans. The stailess steel side swtich on flashlight head and the rear switch on the handle can control flashlight ON/OFF, mode operation etc.
Cooling Fan Operation
ON/OFF: In any state (except LOCK-OUT), single click the front switch on the handle to turn on 2x cooling fans. A single click after this turns the fans OFF.
△ Note: When the light is ON, Single click side switch (or rear switch) also to turn off the cooling fans.
Mode Operation
ON/OFF: When the light is OFF, any click the side switch (or the rear switch) to turn the light ON. When the light is ON, just single click the side switch (or the rear switch) to turn the light OFF.
ECO Modes: From OFF, simple press and hold down the side switch (or the rear switch) to activate ECO modes. press and hold down the side switch (or the rear switch) again after this activates. the light cycle through "L1->L2->L3->L4" (or "L4->L3->L2->L1"). When the light cycle to the last level "L4" (or "L1"), the light will stop to cycle and stay at last level. If you want to select one level you need, just release the side switch (or the rear switch) while the light cycling. If you press and hold down the side switch (or the rear switch) again, the light will be cycled through opposite direction.
△ Note: After activate ECO modes, single click to turn OFF the light; double click to activate Turbo mode; quickly triple click to activate Special modes.
General modes: Single click the side switch (or the rear switch) to activate General modes. Press and hold down the side switch (or the rear switch) agin after this activates. the light cycle through "Low->Mid1-Mid2 ->Mid3->High" (or "High->Mid3->Mid2->Mid1->Low"). When the light cycle to the last level "High" (or "Low"), the light will stop to cycle and stay at last level. If you want to select one level you need, just release the side switch (or the rear switch) while the light cycling. If you press and hold on the side switch (or the rear switch) again, the light will be cylced through opposite direction.
△ Note: After activate general modes, single click to turn OFF the light; Double click to activate Turbo mode; Quickly triple click to activate Special modes.
Turbo mode: Double click the side switch (or the rear switch) to activate Turbo from any other modes (except LOCK-OUT).
△ Note: After activate Turbo mode, single click to turn OFF the light; double click or long press to activate General modes; quickly triple click to activate Special modes.
Special modes: From OFF, quickly triple click the side switch (or the rear switch) to activate strobe. From strobe, press and hold down to cycle through the other safety modes; Beacon > SOS > back to strobe.
△ Note: After activate Special modes, single click to turn OFF the light; double click to activate Turbo mode; quickly triple click to activate General modes.
Breathing light mode: From OFF, click and hold for 3 seconds and release. LED indicator under the side switch will start to breath. There is nothing particular about this except that it is a cool mood light. Click once to turn off.
△ Note: While holding down the side switch (or the rear switch) for 3 seconds, MK38 will activate one level of ECO modes and turn off automatically, and then LED indicator under the side switch will turn on.
LOCK-OUT / UNLOCK: Locking out the light when not in use is highly recommended. From OFF, quickly quadruple click (simply click 4 times fast) to LOCK-OUT. The light will then a blink to indicate that it has been LOCKED. To UNLOCK, quickly quadruple click (simply click 4 times fast) again, the light will turn on to indicate it has been unlocked.
Memory function: From OFF, single click (or long press) the side switch (or the rear switch) to activate the light level at General modes (or ECO modes) last used.Battery pack charging:
1. Please switch off the light and plug the USB Type-C charging cable into the included standard adapter, then connect another USB Type-C socket of the charging cable to the light.
2. MK38 have intelligent identified charging function. When battery pack charging, the indicator near USB-C port will be red constant ON, the indicator will be OFF after battery pack charging is completed.
3. Be sure to close the anti-dust USB cover once battery pack charing is completed.
Power bank function:
1. Please switch off the light and connect the USB Type-C socket of the included charing cable to the light, then connect another USB Type-C socket of the charging cable to the digital device with a USB type-C charging port.
2. MK38 have intelligent identified discharging function. When battery pack discharging as power bank, the indicator will be red constant-ON.
3. Be sure to close the anti-dust USB cover once the battery pack discharging is completed.* Note:
A. You can turn the light ON / OFF and operate all modes when charging & discharging.
B. Battery pack can be full charged in approximately 1.8 hours with the included standard adapter and USB Type-C charging cable.
C. Recharge a stored every four months to maintain optimum performance of the battery.
D. When Connecting to the power bank with the same PD protocol, It might fail to be charged if the protocols are not compatible with the device. For example, Power bank is charging to MK38, or MK38 is charging to the power bank.
E. As a power bank, MK38 can charge only one digital device at a time. Please DO NOT use it to charge a digital device through any multi-port USB hub or charge two or more digital devices at the same time.
Battery Voltage Indicator
When the light is turned on, the built-in power indicator under the stainless steel side switch will show different color light to indicate remaining battery voltage:While battery voltage > 10.2V, blue light turn on and last 3s.
While battery voltage 9.6V-10.2V, purple light turn on and last 3s.
While battery voltage 8.7V-9.6V, red light constant-on.
While battery voltage < 8.7V, the light turn off authomatically.
* Low voltage warning
When the battery voltage level drops below the present level, the light is programmed to downshift to a lower brightness level until lowest output is reached. When the battery voltage level still drops low under lowest output, it will shut off authomatically.
Intelligent Overheat Protection
Advanced intelligent temperature regulation technology allows MK38 to dynamically adjust output performance according to its body temperature.The light will accumulate a lot of heat when you use it at high-output levels for extended periods. When the light reaches the temperature of 65°C or above, the light will automatically step down its output to reduce the temperature. at the same time we also make more premium cooling fins on flashlight head and built-in duable-row fans to blow effectively these cooling fins through the outside to protect flashlight overheat.
* Note: DO NOT submerge the flashlight into any liquid when it is hot. Doing so may cause irrepareable damage to the light due to the difference of air pressure inside and outside of tube.Note: We also high recommend the oridinary users to purhcase Samsung 40T unprotected flat-top 21700 batteries or Modell P42A unprotected flat-top 21700 batteries to drive MK38.
Battery Installation
1. Loose the tailcap counterclockwise and take it away.
2. As shown in the graph, insert batteries with the positive (+) to connect the glod plated copper positive round conductive plate on tailcap PCB, the nagative (-) to connect the glod plated copper spring on PCB.
3. Tighten the tailcap by aligning the two metal pins on the tailcap with the corresponding holes on the flashlight body, and rotate clockwise.
* Warning: 1. DO NOT mix rechargeable and non-rechargeable batteries
2. DO NOT mix batteries of different types/brands
3. DO NOT mix batteries of different power levels
4. DO NOT mix old and new batteries Battery Voltage Indicator
When the light is turned on, the built-in power indicator under the stainless steel side switch will show different color light to indicate remaining battery voltage: While battery voltage > 10.2V, blue light turn on and last 3s.
While battery voltage 9.6V-10.2V, purple light turn on and last 3s.
While battery voltage 8.7V-9.6V, red light constant-on.
While battery voltage < 8.7V, the light turn off authomatically.
* Low voltage warning
When the battery voltage level drops below the present level, the light is programmed to downshift to a lower brightness level until lowest output is reached. When the battery voltage level still drops low under lowest output, it will shut off authomatically.
Intelligent Overheat Protection
Advanced intelligent temperature regulation technology allows MK38 to dynamically adjust output performance according to its body temperature.The light will accumulate a lot of heat when you use it at high-output levels for extended periods. When the light reaches the temperature of 65°C or above, the light will automatically step down its output to reduce the temperature. at the same time we also make more premium cooling fins on flashlight head and built-in duable-row fans to blow effectively these cooling fins through the outside to protect flashlight overheat.
* Note: DO NOT submerge the flashlight into any liquid when it is hot. Doing so may cause irrepareable damage to the light due to the difference of air pressure inside and outside of tube.How to disassemble the handle?
1.Switch off flashlight and use tag tool (included accessory) to press the quick release screw on the counterbored hole, loose the screw counterclockwise, and then twist out the screw with your hand.
2.Lift up the handle, 4PIN connectors on the handle will take off from the connector socket on flashlight head. then you can place the handle to somewhere.
3. Please insert quick release screw into the connector socket and tighten it. At last please use tage tool (included acccessory) to press the screw to tighten it fully to get a waterproof, and then you can switch on flashlight as usual.
How to install the handle?
1.Switch off flashlight and use tag tool (included accessory) to press the quick release screw on the connector socket, loose the screw counterclockwise, and then twist out the screw with your hand.
2.Lift up the handle, make sure the the counterbored hole align the screw hole on flashlight body and 4PIN connectors on the handle will also align the connector socket on flashlight head.
3.Put the screw through the counterbored hole and make the screw tip into the screw hole on flashlight body, and then take tag tool (included accessory) to press the screw to tighen.
Warning
1. The flashlight is locked out default by us. Please quickly four-click to unlock it for the first use.
2. The flashlight is high-intensity lighting device capable of causing eye damage or other harms, so please avoid shining the light directly into anyone's eyes. 3. The flashlight is recommended use for adult or under adult supervision. Please keep this flashlight away from children.
4. Please take off the dustproof filme from lens immediately for the first use.
5. This flashlight is capable of emitting intense heat when turning on for a long period of time. Remember to install the handle before using. Avoid touching the appearance of the flashlight.
6. DO NOT shine a object at close range, cover the flashlight, or place the head to face down when it is turn on. The heat bilt-up may objects to burn or even result in unexpected disasters.
7. After the cooling fans ON, DO NOT push your fingers into fans and force them to stop working as it will demage the fans.
8. DO NOT immerse the flashlight in seawater or other correosive media as it will damage the flashlight.
9. Please turn the flashlight off and make sure that its lock out if it is left unused, carried or transproted. The heat built-up due to accidental activation may melt the lens of the flashlight, cause close objects to urn, or even result in unexpected disasters.
10. The built-in battery pack is charged to approximately 50% by default and will not support maximum output and maximum runtime.
11. To maintain waterproof rating, please lubricate the o-ring with silicone safe lubricant and replace worn o-rings as needed.
12. Please recharge the product every 4 months when left unused for a prolonged time.
13. DO NOT disassemble or modify this product which can cause damage and will void the warranty.
14. When battery pack are full charged, led indicator will turn OFF. at the same time please don't forget to take off USB Type-C charging cable and close the anti-dust USB cover immediately.
15. After uninstall the handle, please put the quick release screw into the connector socket on the flashlight head and tighten it to get a better waterproof.
16.After discharge as power bank is complete, please don't forget to close the anti-dust USB cover immediately
BATTERY OPTION:
1. Internal battery with side USB charging
2. 3x 21700 battery in magazine (no charger)
3. 3x 21700 battery in magazine (Incl TF TR-018 charger)
Features
LED OPTION
- Option1: Utilizes 8x CREE XHP70.2 LEDs (6500K) with a max output of 41,500 lumens
Maximum beam intensity of 160,000 cd, and maximum throw distance of 800 meters
- Option2: Utilizes 8x CREE XHP70.2 LEDs (5000K) with a max output of 39,425 lumens
Maximum beam intensity of 144,400 cd, and maximum throw distance of 760 meters
- Option3: Utilizes 8x LUMINUS SFT40 LEDs (6500K) with a max output of 20,000 lumens
Maximum beam intensity of 360,000 cd, and maximum throw distance of 1,200 meters
Integrated precision digital optics technology provides extreme reflector performance
Utilizes dual-sided AR coated, 99% transmittance toughened glass lens
A step-down constant current circuit design with an efficiency rate up to 98%
Buil-in 10.8V / 4200mAh li-ion battery pack (made by 3x 3.6V/4200mAh 21700 battery cells) or
Power by 3x high drain 21700 batteries
Fast USB Type-C charging with discharging function available (not in 3x 21700 battery option)
Build in battery Features
1.8 hours for full charging, 1.5 hours for full charging over 90%
Built-in intelligent adaptive charging and discharging function and protocols of QC3.0 & PD3.0
With advanced intelligent temperature regulation module, MK38 regulates its output and adapts to the ambient environment, maintaining optimal performance
Electronic reverse polarity protection and over-discharge protection
Integrated power indicator under the side switch indicates remaining battery voltage
Integrated indicator near USB-C port indicates the status of charging & powerbank discharging
Multi-switches design, clear division:
- Stainless steel side switch control the light to turn on/off and change modes etc
- Front switch on handle control 2x waterproof cooling fans to turn on/off
- Rear switch on handle control the light to turn on/off and change modes etc
User interface is simple and friendly, easy one-hand operation:
- From OFF, long press to ECO modes.
- From OFF, single press to General modes.
- Double click to Turbo from any modes (except LOCK-OUT)
- From OFF, quick triple click to Special modes (Strobe / Beacon / SOS to select)
- From OFF, quick quadrple click to lock-out the light
CNC machined from durable aircraft-grade aluminum alloy
Surface finish (option): Premium type-III hard-anodized or Micro-arc oxidation
Stainless steel strike bezel is used to break windows in an emergency situation
Triple-interface on flashlight head: Stainless steel side switch, UNC1/4" triple hole, waterproof 4PIN connector socket
Built-in UNC1/4" tripod hole, MK38 can be directly mounted to a tripod, turning it into a camp light or a fixed supplementary light
Utilizes stainless steel side switch with CD pattern surface for good touch feelings
Detachable handheld handle meets various lighting demands
Triple-sided premium cooling fins improve heat dissipation performance
Built-in double-row cooling fans on the handle to blow effectively cooling fins through outside
Convenient tail-stand capacbility
IPX-7 waterproof standard (1 meters under water)
Impact resistant to 1 meter
What's package Included?
1x Manker MK38 flashlight (built-in battery pack or 3x 21700 as per top selection)
1x Detachable handle
1x USB Type-C cable (build in battery option)
1x Super charging adapter (Plug option: European) (build in battery option)
1x Quick release screw
1x Stainless steel tag tool
1x Lanyard
1x User manual Technical Data
MK38 with 8x CREE XHP70.2 LEDs 6500K:
Modes/Level Luminance Runtime
Turbo mode - Turbo level (Thermal regulation): 41,500 lumens 1 hours 30 minutes
General mode - High level (Thermal regulation): 20,000 lumens 1 hours 40 minutes
General mode - Mid3 level (Thermal regulation): 10,000 lumens 1 hours 50 minutes
General mode - Mid2 level: 5,000 lumens 2 hours 20 minutes
General mode - Mid1 level: 2,200 lumens 5 hours
General mode - Low level: 1,000 lumens 10 hours
ECO mode - L4 level: 400 lumens 20 hours
ECO mode - L3 level: 180 lumens 28 hours
ECO mode - L2 level: 80 lumens 50 hours
ECO mode - L1 level: 40 lumens 66 hours
Special mode - Strobe: 25,000 lumens -
Maximum light intensity: 160,000 cd
Maximum beam distance: 800 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
MK38 with 8x CREE XHP70.2 LEDs 5000K:
Modes/Level Luminance Runtime
Turbo mode - Turbo (Thermal regulation): 39,425 lumens 1 hours 30 minutes
General mode - High level (Thermal regulation): 19,000 lumens 1 hours 40 minutes
General mode - Mid3 level (Thermal regulation): 9,500 lumens 1 hours 50 minutes
General mode - Mid2 level: 4,600 lumens 2 hours 20 minutes
General mode - Mid1 level: 2,090 lumens 5 hours
General mode - Low level: 950 lumens 10 hours
ECO mode - L4 level: 400 lumens 20 hours
ECO mode - L3 level: 180 lumens 28 hours
ECO mode - L2 level: 80 lumens 50 hours
ECO mode - L1 level: 40 lumens 66 hours
Special mode - Strobe: 23,750 lumens -
Maximum light intensity: 144,400 cd
Maximum beam distance: 760 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
MK38 with 8x LUMINUS SFT40 LEDs 6500K:
Modes/Level Luminance Runtime
Turbo mode - Turbo (Thermal regulation): 20,000 lumens 2 hours
General mode - High level (Thermal regulation): 10,000 lumens 2 hours 15 minutes
General mode - Mid3 level (Thermal regulation): 5,000 lumens 2 hours 30 minutes
General mode - Mid2 level: 2,500 lumens 3 hours
General mode - Mid1 level: 1,300 lumens 6 hours
General mode - Low level: 650 lumens 12 hours
ECO mode - L4 level: 320 lumens 22 hours
ECO mode - L3 level: 160 lumens 33 hours
ECO mode - L2 level: 80 lumens 50 hours
ECO mode - L1 level: 40 lumens 66 hours
Special mode - Strobe: 12,000 lumens -
Maximum light intensity: 360,000 cd
Maximum beam distance: 1,200 meters
Waterproof standard: IPX-7, 1Meters under water
Impact resistant: 1 meters
More information, please check the table on the photo as belows:
(* Note: You can open this photo in new tab on your Google chrome to enlarge.). Note: The front switch on the handle can turn on/off the cooling fans. The stailess steel side swtich on flashlight head and the rear switch on the handle can control flashlight ON/OFF, mode operation etc.
Cooling Fan Operation
ON/OFF: In any state (except LOCK-OUT), single click the front switch on the handle to turn on 2x cooling fans. A single click after this turns the fans OFF.
△ Note: When the light is ON, Single click side switch (or rear switch) also to turn off the cooling fans.
Mode Operation
ON/OFF: When the light is OFF, any click the side switch (or the rear switch) to turn the light ON. When the light is ON, just single click the side switch (or the rear switch) to turn the light OFF.
ECO Modes: From OFF, simple press and hold down the side switch (or the rear switch) to activate ECO modes. press and hold down the side switch (or the rear switch) again after this activates. the light cycle through "L1->L2->L3->L4" (or "L4->L3->L2->L1"). When the light cycle to the last level "L4" (or "L1"), the light will stop to cycle and stay at last level. If you want to select one level you need, just release the side switch (or the rear switch) while the light cycling. If you press and hold down the side switch (or the rear switch) again, the light will be cycled through opposite direction.
△ Note: After activate ECO modes, single click to turn OFF the light; double click to activate Turbo mode; quickly triple click to activate Special modes.
General modes: Single click the side switch (or the rear switch) to activate General modes. Press and hold down the side switch (or the rear switch) agin after this activates. the light cycle through "Low->Mid1-Mid2 ->Mid3->High" (or "High->Mid3->Mid2->Mid1->Low"). When the light cycle to the last level "High" (or "Low"), the light will stop to cycle and stay at last level. If you want to select one level you need, just release the side switch (or the rear switch) while the light cycling. If you press and hold on the side switch (or the rear switch) again, the light will be cylced through opposite direction.
△ Note: After activate general modes, single click to turn OFF the light; Double click to activate Turbo mode; Quickly triple click to activate Special modes.
Turbo mode: Double click the side switch (or the rear switch) to activate Turbo from any other modes (except LOCK-OUT).
△ Note: After activate Turbo mode, single click to turn OFF the light; double click or long press to activate General modes; quickly triple click to activate Special modes.
Special modes: From OFF, quickly triple click the side switch (or the rear switch) to activate strobe. From strobe, press and hold down to cycle through the other safety modes; Beacon > SOS > back to strobe.
△ Note: After activate Special modes, single click to turn OFF the light; double click to activate Turbo mode; quickly triple click to activate General modes.
Breathing light mode: From OFF, click and hold for 3 seconds and release. LED indicator under the side switch will start to breath. There is nothing particular about this except that it is a cool mood light. Click once to turn off.
△ Note: While holding down the side switch (or the rear switch) for 3 seconds, MK38 will activate one level of ECO modes and turn off automatically, and then LED indicator under the side switch will turn on.
LOCK-OUT / UNLOCK: Locking out the light when not in use is highly recommended. From OFF, quickly quadruple click (simply click 4 times fast) to LOCK-OUT. The light will then a blink to indicate that it has been LOCKED. To UNLOCK, quickly quadruple click (simply click 4 times fast) again, the light will turn on to indicate it has been unlocked.
Memory function: From OFF, single click (or long press) the side switch (or the rear switch) to activate the light level at General modes (or ECO modes) last used.Battery pack charging:
1. Please switch off the light and plug the USB Type-C charging cable into the included standard adapter, then connect another USB Type-C socket of the charging cable to the light.
2. MK38 have intelligent identified charging function. When battery pack charging, the indicator near USB-C port will be red constant ON, the indicator will be OFF after battery pack charging is completed.
3. Be sure to close the anti-dust USB cover once battery pack charing is completed.
Power bank function:
1. Please switch off the light and connect the USB Type-C socket of the included charing cable to the light, then connect another USB Type-C socket of the charging cable to the digital device with a USB type-C charging port.
2. MK38 have intelligent identified discharging function. When battery pack discharging as power bank, the indicator will be red constant-ON.
3. Be sure to close the anti-dust USB cover once the battery pack discharging is completed.* Note:
A. You can turn the light ON / OFF and operate all modes when charging & discharging.
B. Battery pack can be full charged in approximately 1.8 hours with the included standard adapter and USB Type-C charging cable.
C. Recharge a stored every four months to maintain optimum performance of the battery.
D. When Connecting to the power bank with the same PD protocol, It might fail to be charged if the protocols are not compatible with the device. For example, Power bank is charging to MK38, or MK38 is charging to the power bank.
E. As a power bank, MK38 can charge only one digital device at a time. Please DO NOT use it to charge a digital device through any multi-port USB hub or charge two or more digital devices at the same time.
Battery Voltage Indicator
When the light is turned on, the built-in power indicator under the stainless steel side switch will show different color light to indicate remaining battery voltage:While battery voltage > 10.2V, blue light turn on and last 3s.
While battery voltage 9.6V-10.2V, purple light turn on and last 3s.
While battery voltage 8.7V-9.6V, red light constant-on.
While battery voltage < 8.7V, the light turn off authomatically.
* Low voltage warning
When the battery voltage level drops below the present level, the light is programmed to downshift to a lower brightness level until lowest output is reached. When the battery voltage level still drops low under lowest output, it will shut off authomatically.
Intelligent Overheat Protection
Advanced intelligent temperature regulation technology allows MK38 to dynamically adjust output performance according to its body temperature.The light will accumulate a lot of heat when you use it at high-output levels for extended periods. When the light reaches the temperature of 65°C or above, the light will automatically step down its output to reduce the temperature. at the same time we also make more premium cooling fins on flashlight head and built-in duable-row fans to blow effectively these cooling fins through the outside to protect flashlight overheat.
* Note: DO NOT submerge the flashlight into any liquid when it is hot. Doing so may cause irrepareable damage to the light due to the difference of air pressure inside and outside of tube.Note: We also high recommend the oridinary users to purhcase Samsung 40T unprotected flat-top 21700 batteries or Modell P42A unprotected flat-top 21700 batteries to drive MK38.
Battery Installation
1. Loose the tailcap counterclockwise and take it away.
2. As shown in the graph, insert batteries with the positive (+) to connect the glod plated copper positive round conductive plate on tailcap PCB, the nagative (-) to connect the glod plated copper spring on PCB.
3. Tighten the tailcap by aligning the two metal pins on the tailcap with the corresponding holes on the flashlight body, and rotate clockwise.
* Warning: 1. DO NOT mix rechargeable and non-rechargeable batteries
2. DO NOT mix batteries of different types/brands
3. DO NOT mix batteries of different power levels
4. DO NOT mix old and new batteries Battery Voltage Indicator
When the light is turned on, the built-in power indicator under the stainless steel side switch will show different color light to indicate remaining battery voltage: While battery voltage > 10.2V, blue light turn on and last 3s.
While battery voltage 9.6V-10.2V, purple light turn on and last 3s.
While battery voltage 8.7V-9.6V, red light constant-on.
While battery voltage < 8.7V, the light turn off authomatically.
* Low voltage warning
When the battery voltage level drops below the present level, the light is programmed to downshift to a lower brightness level until lowest output is reached. When the battery voltage level still drops low under lowest output, it will shut off authomatically.
Intelligent Overheat Protection
Advanced intelligent temperature regulation technology allows MK38 to dynamically adjust output performance according to its body temperature.The light will accumulate a lot of heat when you use it at high-output levels for extended periods. When the light reaches the temperature of 65°C or above, the light will automatically step down its output to reduce the temperature. at the same time we also make more premium cooling fins on flashlight head and built-in duable-row fans to blow effectively these cooling fins through the outside to protect flashlight overheat.
* Note: DO NOT submerge the flashlight into any liquid when it is hot. Doing so may cause irrepareable damage to the light due to the difference of air pressure inside and outside of tube.How to disassemble the handle?
1.Switch off flashlight and use tag tool (included accessory) to press the quick release screw on the counterbored hole, loose the screw counterclockwise, and then twist out the screw with your hand.
2.Lift up the handle, 4PIN connectors on the handle will take off from the connector socket on flashlight head. then you can place the handle to somewhere.
3. Please insert quick release screw into the connector socket and tighten it. At last please use tage tool (included acccessory) to press the screw to tighten it fully to get a waterproof, and then you can switch on flashlight as usual.
How to install the handle?
1.Switch off flashlight and use tag tool (included accessory) to press the quick release screw on the connector socket, loose the screw counterclockwise, and then twist out the screw with your hand.
2.Lift up the handle, make sure the the counterbored hole align the screw hole on flashlight body and 4PIN connectors on the handle will also align the connector socket on flashlight head.
3.Put the screw through the counterbored hole and make the screw tip into the screw hole on flashlight body, and then take tag tool (included accessory) to press the screw to tighen.
Warning
1. The flashlight is locked out default by us. Please quickly four-click to unlock it for the first use.
2. The flashlight is high-intensity lighting device capable of causing eye damage or other harms, so please avoid shining the light directly into anyone's eyes. 3. The flashlight is recommended use for adult or under adult supervision. Please keep this flashlight away from children.
4. Please take off the dustproof filme from lens immediately for the first use.
5. This flashlight is capable of emitting intense heat when turning on for a long period of time. Remember to install the handle before using. Avoid touching the appearance of the flashlight.
6. DO NOT shine a object at close range, cover the flashlight, or place the head to face down when it is turn on. The heat bilt-up may objects to burn or even result in unexpected disasters.
7. After the cooling fans ON, DO NOT push your fingers into fans and force them to stop working as it will demage the fans.
8. DO NOT immerse the flashlight in seawater or other correosive media as it will damage the flashlight.
9. Please turn the flashlight off and make sure that its lock out if it is left unused, carried or transproted. The heat built-up due to accidental activation may melt the lens of the flashlight, cause close objects to urn, or even result in unexpected disasters.
10. The built-in battery pack is charged to approximately 50% by default and will not support maximum output and maximum runtime.
11. To maintain waterproof rating, please lubricate the o-ring with silicone safe lubricant and replace worn o-rings as needed.
12. Please recharge the product every 4 months when left unused for a prolonged time.
13. DO NOT disassemble or modify this product which can cause damage and will void the warranty.
14. When battery pack are full charged, led indicator will turn OFF. at the same time please don't forget to take off USB Type-C charging cable and close the anti-dust USB cover immediately.
15. After uninstall the handle, please put the quick release screw into the connector socket on the flashlight head and tighten it to get a better waterproof.
16.After discharge as power bank is complete, please don't forget to close the anti-dust USB cover immediately
Features:
High performance long-rang searching-level royal Flashlight
High efficiency constant current circuit and Integration optical lens
Large-diameter reflector cups make the light gathering ability stronger, and the light intensity is greatly improved
Memory function in brightness mode. When the flashlight is turned on again, the mode will stay in the mode which was last turned off
Intelligent temperature control design, automatically reduce lumen output when temperature is higher than 55℃ in turbo knurling design
Breathing switch function: Monitor working process of battery capacity and voltage
Added a PTZ screw hole on the head to fix standard 1/4 inch Tripod mount
Head fin adjustment and design to speed up heat emission
Configure a strap to make your trip more convenient
Handle, switch button and gravity control, is more ergonomic to facilitate your operation
Constructed from aero grade aluminum alloy with HAIII military grade hard-anodized finish
IPX-7 standard waterproof, can be used in rainstrorms
Operation:
Light on/off: Press the side switch to turn the light on/off
High mode: Normal mode clicks three times
Lockout mode: When the flashlight is off, long press to turn off the breathing light and lock out
Under the lockout mode, long press to unlock it
Click twice in Light off or Normal mode, to enter TURBO and clicks three times to enter TACTICAL STROBE
Normal mode will be memorized
Notes:
1. Battery Configurations: Sumsung 3500mAh 35E Batteries Recommended
(If the battery is not enough current, it won't drive the flashlight up or the light will be weaker)
2. Do not disassemble the lamp head, otherwise it is easy to destroy the bulb
Package List:
1 x MT35 Plus
1 x Back Strap
1 x lanyard
1 x Tripod Mount Screw
2 x Orings
1 x Manual
4 x 18650 Batteries
1 x Soshine charger
Specification
Product Name Mateminco MT35 Plus
Brand MATEMINCO
LED Cree Xhp35 Hi
Material Aluminum Alloy
Mode
1. Moon, Mid, High, Turbo, Tactical Strobe, SOS, Location Beacon
2. Any Mode (including turn off): Click twice to Turbo or Click three times to Strobe, Then single click to SOS, Location Beacon
3. Breathing Light Lock Out Design
Switch Type Clicky Switch
Switch Location Body Side Of The Flashlight
Battery 4*18650 battery
Max Output 2700 Lumens
Max Beam Distance 2416m
Max Beam Intensity 1460000cd
Color Black
Impact Resistance 1.5 Meters
Waterproof IPX7
Weight 1290g (without battery)
Size 234mm*136mm*54mm (Length * Head Diameter * Body Diameter)
The upgraded Fenix LD22 V2.0 is a multi-use flashlight with a slim body design, multiple power options and great performance perfect for just about every lighting task. This AA battery powered flashlight now includes a rechargeable li-ion battery pack. You not only get a great USB Type-C rechargeable power source, but you also get increased performance with a maximum 800 lumens of light. As an alternative, you can use two AA alkaline (included) or NiMH AA batteries (not included) for a maximum 350 lumens. The LD22 V2.0's slim design, 0.7" round, and reversible clip make it a great every day carry choice. Made of durable A6061-T6 aluminum, the LD22 V2.0 is impact resistant and waterproof underwater to 2 meters. 7 lighting modes including a strobe, SOS round out this great daily-use flashlight.
The new Fenix E18R is truly an impressive flashlight. You get a maximum 750 lumens from a 2.36-inch flashlight, weighing only 1.17 ounces (without the battery) AND it is rechargeable via an included magnetic charging cable. You can always trust the construction of a Fenix flashlight. The oxidation-resistant aluminum body and the ultra-thin optical lens are built to withstand every-day use as well as the harshest elements. The E18R operates with two battery sources: the recommended rechargeable 16340 battery or a CR123A battery as a backup source or a source when in below-freezing temperatures. You will want to add the E18R to your EDC lineup. The size and output make the E18R perfect for hiking, camping, fishing, and industrial use. Cree XP-L HI LED with a lifespan of 50,000 hours Lumen output based on one 16340 rechargeable battery Turbo: 750 lumens/45 min. (446 ft./136 meters) High: 150 lumens/2 hr. 35 min. (190 feet/58 meters) Med: 30 lumens/13 hr. 50 min. (82 feet/25 meters) Low: 5 lumens/70 hr. (46 feet/14 meters) Magnetic charging in the neck Lockout function and multiple ways to avoid accidental activation Battery-level indicatorThe automobile-type optical lens coating process Side switch for one-switch operation Magnetic tail Reverse polarity protection to protect from improper battery insertion Intelligent overheat protection Low-voltage warning to remind when the battery needs to be recharged Digitally-regulated output maintains constant brightness Durable high-strength, oxidation-resistant aluminum Operates on a rechargeable 16340 battery or non-rechargeable CR123A battery IP68 -Rated: totally protected against dust and foreign objects and submersible to 6.5 feet for 30 minutes
The Fenix LD22 Flashlight 2015 G2 is an updated version of our best-selling LD22 model. The LD22 2015 Edt. still features the compact size while receiving new operation features and a higher output of 300 lumens, all from two AA batteries. The four brightness levels plus Strobe and SOS well meet lighting demands for daily use, hiking, searching, etc. An exciting new feature is the unique Outdoor Mode. In this mode, the Fenix LD22 2015 allows for standard flashlight operation: the side switch controls all output modes and the tail switch simply turns the light on and off. For fast and simplified functionality, the new Tactical Mode turns off the side switch and activates the turbo, strobe, and mid modes through the tactical tail switch only. View all the LD22 Specs below. Utilizes a Cree XP-G2(R5) LED with a lifespan of 50,000 hours 4 Brightness Modes Plus Rapid Strobe and Hidden SOS Outdoor Mode Turbo: 300 Lumens (Ni-MH: 1 hr. 25 min.; Alkaline: 40 min.) High: 100 Lumens (Ni-MH: 7 hr. 10 min.; Alkaline: 5 hr. 5 min.) Mid: 30 Lumens (Ni-MH: 25 hr. 5 min.; Alkaline: 22 hr. 30 min.) Low: 5 Lumens (Ni-MH: 100 hr.; Alkaline: 90 hr.) Strobe: 300 Lumens SOS: 100 Lumens Tactical Mode Turbo: 300 Lumens (Ni-MH: 1 hr. 25 min.; Alkaline: 40 min.) Mid: 30 Lumens (Ni-MH: 25 hr. 5 min.; Alkaline: 22 hr. 30 min.) Strobe: 300 Lumens Tactical tail switch with momentary-on function Maximum beam throw: 394 feet (120 meters)Stainless steel switch for output selection under Outdoor mode Dual operation mode and Outdoor Mode is the factory default setting Intelligent memory circuit (when in Outdoor Mode), automatically enters previously used brightness level when turned on Digitally regulated output maintains constant brightness Reverse polarity protection, to protect from improper battery installation Made of durable aircraft-grade aluminium Premium type III hard-anodized anti-abrasive finish Toughened ultra-clear glass lens with anti-reflective coating Waterproof to IPX-8 standard. 3 meters/9.8 feet for 30 min. Size Length: 6.1-inch (156mm) Diameter: 0.8-inch (21.5 mm) Weight: 2.5 oz. (60-grams) Excluding batteries
The Fenix WT16R magnetic flashlight is a great all-purpose work light. A single switch allows you to choose between three brightness levels of a forward facing spotlight, two floodlight levels and a yellow flash. Magnets on the tail and back let you attach the light to most metal surfaces for hands-free lighting. The sturdy clip allows you to attach the light to your belt, pocket or pack. Check the built-in battery’s status with the battery level indicator and recharge it via the USB type-C charging port. Quality built with an IP66 rated dustproof and heavy rain resistant, the Fenix WT16R Rechargeable Magnetic Flashlight will be your trusted tool in the field or on the job.
King Guard Police Pepper Spray 110ml
Main Perfomances:
Spray Distance: >3m
Effective Spray time: >4s
Suitable Temperature: -30 -+50 degrees celsius
Specifications:
-12 Lumens
-3x LR44 (Included)
-15m Beam Distance
-20Hours Run Time
-Keychain
-Water resistant
-Bottle opener
The Fenix E-CP rechargeable power bank flashlight features a very bright 1600 lumen flashlight, but it also doubles as a power bank to charge other devices. Simply insert the included USB Type-C charging cable (or other compatible USB cable) into the tail of the light and let the 18W fast discharging quickly charge your device. The side switch activates the light and allows you to cycle through five brightness levels plus strobe. The octagonal shape prevents rolling and the lack of a tail switch allows you to tail stand the light for hands-free lighting. IP68 rated waterproof and dustproof, this flashlight with a power bank is a go-anywhere tool that will charge your next adventure.
The Fenix TK26R is a tactical flashlight packed full of features. Not only do you have five modes of white light, but you also have an independent red and green light. Powered by one included 18650 battery, this light can blast a maximum 1500 lumens 1148ft (350m).
The Fenix TK26R is a flashlight packed full of features. Not only do you have five modes of white light, but you also have an independent red and green light. Powered by one included 18650 battery, this light can blast a maximum 1500 lumens 1148ft (350m). Features include three independent switches that control all the lights functions, plus strobe, a battery level indicator and strike bezel. Built tough from premium aluminum, this tactical flashlight is also waterproof and dustproof.
Length: 5.9” (150mm)
Head: 1.6” (40mm)
Body: 1.0” (25.4mm)
5.5 oz. (157g) excluding battery
One (included) 18650 rechargeable Li-ion battery or two CR123A batteries
|
|
Welcome to Loot.co.za!
Sign in / Register |Wishlists & Gift Vouchers |Help | Advanced search
