WORKS WITH Xbox One AND PC
Enhance your console experience
Driving Force is designed for the latest Xbox One™ console racing game titles. You may never race with a regular controller again after you experience G920 Driving Force.

G920 Driving Force also works on PC with select titles using Logitech Gaming Software.

Dual-Motor Force Feedback
Experience every weight shift, and tire slip
Feel your tires on every turn and type of terrain, sense under- or over-steer drifting. Powerful dual-motor force feedback realistically simulates force effects for precision response.

Designed for distance
Race-ready materials that can handle it all
Driving Force handles the stress of racing action and is built for long-lasting reliability. Solid steel ball bearings in the wheel shaft and stainless steel paddle shifters and pedals make G920 the long-distance race wheel. It’s covered in high-quality, hand-stitched leather, with the look and feel of a high-performance racecar wheel and it gives you a more comfortable, durable experience.

Helical Gearing with Anti-Backlash
Precision control
Helical gears are modeled after gears used in automotive transmissions to reduce unwanted noise and vibration. Anti-backlash keeps the wheel and pedals tight, maximizing your control. This steering wheel delivers exceptionally smooth, quiet steering action. G920 Driving Force Racing Wheel features a long lasting, reliable hall-effect steering sensor, using magnetic fields to sense the position of the wheel.

Easy-Access Game Controls
Control where you need it
Get even more control over your car’s setup. G920 Racing Wheel incorporates the D-Pad and console buttons into the wheel so all your controls are right where you can reach them, while the semi-automatic paddle shifters help you execute smooth, accurate gear transitions on hairpin turns and straightaways.

Responsive Pedal Unit
Adjustable for maximum control
Maintain a more realistic driving body position with the separate floor pedal unit with integrated throttle, brake, and clutch pedals. G920 Driving Force lets you comfortably accelerate, brake and change gears with the feel of an actual car.

The nonlinear brake pedal mimics the performance of a pressure-sensitive brake system for a more responsive, accurate braking feel. For even finer control, reposition the pedal faces to make heel-toe maneuvers easier to perform.

Rubber feet for hard surfaces and a patented retractable carpet grip system help your pedals stay right where you put them.

Mounts Securely
Performance that stays where you want it
Drive fearlessly knowing the wheel won’t shift during aggressive maneuvers. The racing wheel mounts securely to your table or racing rig via built-in clamps or screw mounting points.
Take your racing to the next level with a Playseat® racing simulation cockpit.

900° Steering
For realistic turns on the track
The 900-degree lock-to-lock rotation of the G920 Driving Force means you can turn the wheel around two and a half times, hand over hand on wide turns. It’s the same degree of motion as a steering wheel inside a car.

Steering Wheel Stripe
Stay oriented in the right direction
Easily see if your steering is dialed in using a visual cue within your peripheral vision. The steering wheel stripe is a visual indicator of which direction the wheel is pointing.

Works with Driving Force Shifter Attachment
Pinpoint gear selection
Complete your racing rig for the most realistic experience. Add the 6-speed manual Driving Force shifter to your racing wheel setup.

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your Xbox Console:

This skin will fit the Standard Xbox Console. (Will not fit the Xbox S or X console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:
• Covers complete console, two controllers and the Kinect
• Thin and tough protects from minor scratches
• Easy, bubble-free installation and sticky free removal
• No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

SKIN-NIT Just got better! New high quality Vinyl used for better results. Our skins will not lift or come off unless you take it off. Please make sure you follow the installation instructions below to avoid issues. If you have any issues with the skin please contact our support team at CC Entertainment.

Skin-Nit the easiest way to protect and style your Xbox Console:

This skin will fit the Standard Xbox Console. (Will not fit the Xbox S or X console)

Description:

Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional printers.

Specifications:
• Covers complete console, two controllers and the Kinect
• Thin and tough protects from minor scratches
• Easy, bubble-free installation and sticky free removal
• No Cutting required

What is a skin?

Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Don’t be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!

Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG

SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt or Gloss finish depending on material availability. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN

SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN

The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT

SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide

1. Prep your work table: You need a flat area. Make sure it’s clean. Avoid any dust, stray hairs and food from last night’s dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure there’s no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. We’ve found it’s best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. You’re done! You’ve just installed your first custom skin. Now go show off your newly skinned device to the world!

* Physical Console and Controllers not included

*Console not included!!!

The easiest way to protect and style your Xbox One Standard Console:
This skin will fit the Xbox One Standard Console. (Will not fit the S or X console)

Description:
Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a matt finish. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional inkjet printers.

Specifications:
• Covers complete console, two controllers and the Kinect
• Thin and tough protects from minor scratches
• Easy, bubble-free installation and sticky free removal
• No Cutting required

What is a skin?
Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Dont be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!
Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG
SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt finish. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN
SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN
The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT
SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide
1. Prep your work table: You need a flat area. Make sure its clean. Avoid any dust, stray hairs and food from last nights dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure theres no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. Weve found its best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. Youre done! Youve just installed your first custom skin. Now go show off your newly skinned device to the world!

*Console not included!!!

The easiest way to protect and style your Xbox One Standard Console:
This skin will fit the Xbox One Standard Console. (Will not fit the S or X console)

Description:
Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a matt finish. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional inkjet printers.

Specifications:
• Covers complete console, two controllers and the Kinect
• Thin and tough protects from minor scratches
• Easy, bubble-free installation and sticky free removal
• No Cutting required

What is a skin?
Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Dont be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!
Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG
SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt finish. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN
SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN
The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT
SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide
1. Prep your work table: You need a flat area. Make sure its clean. Avoid any dust, stray hairs and food from last nights dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure theres no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. Weve found its best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. Youre done! Youve just installed your first custom skin. Now go show off your newly skinned device to the world!

*Console not included!!!

The easiest way to protect and style your Xbox One Standard Console:
This skin will fit the Xbox One Standard Console. (Will not fit the S or X console)

Description:
Our decal skins are made from premium vinyl that has a special no bubble, no residue adhesive back making them easy to apply and remove. The Vinyl is protected with a cold lamination film that comes in a matt finish. Every sticker is measured, to ensure our skins are cut to your devices exact specifications and will fit perfectly first time. Excellent print quality. Skins are printed with full color ink on state of the art professional inkjet printers.

Specifications:
• Covers complete console, two controllers and the Kinect
• Thin and tough protects from minor scratches
• Easy, bubble-free installation and sticky free removal
• No Cutting required

What is a skin?
Think of a skin as a kind of armor for your device. Not only will it protect your device from scratches, it will make your device stand out and reflect your personality. Dont be like the rest of the crowd and own a boring standard device. SKIN-NIT and stand out like never before!
Why skin your device with SKIN-NIT?

OUR SKINS ARE STRONG
SKIN-NIT skins are made from premium vehicle grade vinyl. The same vinyl they use on cars. The Vinyl is then protected with a cold lamination film that comes in a Matt finish. Our skins are super strong will stand the test of time.

APPLYING YOUR SKIN
SKIN-NIT skins have a special no bubble, no residue adhesive back making them easy to apply. If you can apply a sticker to a sticker book, then you can apply a SKIN-NIT Skin. Its really that simple! Ez Pz (Easy Peazy)

REMOVING YOUR SKIN
The only reason you would want to do this is so you can change the design of your skin. We at CC Entertainment cant think of another reason why you would want to remove your awesome skin. But yes removing your SKIN-NIT skin is simple and we promise no residue will be left behind.

SKIN CUT
SKIN-NIT skins are super thin and wont cause any damage or overheating to your device. Our Skins are perfectly cut every time to ensure no air-vents, cable inputs or docking stations are affected in anyway.

SKIN-NIT Step-By-Step Installation Guide
1. Prep your work table: You need a flat area. Make sure its clean. Avoid any dust, stray hairs and food from last nights dinner.
2. Prep your hands: Get up and wash your hands with soap and warm water to remove any natural oils and grease from your hands. Dry your hands thoroughly.
3. Prep your device: The surface of your device needs to be clean, so grab your damp towel and wipe your device down to remove any dirt and grit. Do not use any cleaning detergents as they may affect the glue from bonding – only use water.
4. Dry your device: Using your dry towel, make sure theres no water left on your device. Let it sit for a few minutes to make sure any leftover water has evaporated.
5. Get the skin ready: Using your safety pin or paperclip, carefully remove any cutouts of the skin. Weve found its best to do this while the skin is still on the backing.
6. Peel & Apply: Now you can gently peel your skin off its backing and apply it to your device. Start at one edge and use the other edges as a guide to get your skin perfectly lined up. Take your time. If you come across any air bubbles or wrinkles during the process, gently run your finger over them and the channeled adhesive will allow the bubbles to be pressed out. Pressure will help bond your skin so be sure to push down hard on all areas especially on the corners to ensure your skin has bonded correctly.
7. Youre done! Youve just installed your first custom skin. Now go show off your newly skinned device to the world!

Features:
Designed for imitation Xbox One wireless controllers.
Two controllers can be charged simultaneously.
Powered through any USB port on your PS4, personal computer, AC adapter, etc.
Distinct dual colored LED light indicator showing charge status. Charging:red, charged:green.
It takes about 4 hours to be Fully charged.

Specifications:
Output: DC 5V
Charging current: 400mA
Color: Black
Material: Plastic

NOTE:
This is a imitational Xbox One charging dock, please charge with the imitation battery.

Package content:
1 * Charging Station
1 * USB Cable

Enhance your gaming experience with these simple grip add-ons for your Xbox One official controller.

These thumbstick grips are must for any gamer to provide comfort and ensure your thumbs do not slip during gameplay.

Each pack contains 4 grips, two dotted pattern and two diamond pattern grips.
 
Specifically engineered to exactly fit Xbox one controllers, not suitable for any other games controller.

The caps are made from high quality TPU - A hybrid material between plastic and silicone giving the following qualities:

- A hybrid medium softness rating similar to silicone but more durable
- The perfect snap on fit to your thumb sticks
- Resistance against oil, grease and dust
- Added grip and control during game play thanks to the raised dotted texture

Each pack contains 4 grips, two dotted pattern and two diamond pattern grips.

Specifically engineered to exactly fit official Xbox One controllers, not suitable for any other games controller.
Ask Question

Blaze past your enemies in a flaming ball of glory with the FPS Freek Inferno. Perfect for any type of shooter or action-based gameplay, the vibrant red-on-black color scheme showcases the distinct spiral pattern pulled straight from our best-selling FPS Freek Vortex.

Unlike the Vortex, FPS Freek Inferno thumbsticks are both the same, tall height (10.4 mm) ideal for first- and third-person shooters. The tall height boosts range of motion by more than 115% for increased accuracy and precision, and Inferno’s laser-etched, spiral design ensures comfort and grip during long gaming sessions or for gamers with big hands.

Whether your shooting ‘em up in CoD or exploring lost empires in Tomb Raider, the FPS Freek Inferno will be the best tool in your arsenal.

Protect your Xbox One with this anti-scratch Tottenham Hotspur skin.
- Easy application
- No residue when removed
- Official licensed product

Designed for G29 and G920 Driving Force Wheels
Lock in the right gear at the right time.
Driving Force™ Shifter is designed for both G29 and G920 Driving Force racing wheels, to enhance the latest PC and console racing titles. Add Driving Force Shifter to your racing wheel setup to complete your racing rig for a more realistic experience.

Quality Construction
Race comfortably and with confidence
With a solid steel gear shaft, Driving Force Shifter is built for precision racing and long-lasting reliability. The knob and boot are covered in high-quality, hand-stitched leather, giving it a look and feel similar to a high-performance race shifter and giving you a more comfortable, durable experience.

Six-Speed Shifter with Push-Down Reverse
Maintain acceleration through every gear
The six-speed “H”-pattern shifter moves fluidly and solidly clicks into each gear, helping you execute smooth, accurate gear transitions on hairpin turns and straightaways.

Secure Mounting
Won’t shift while you’re shifting
Durable built-in clamps allow Driving Force Shifter to be mounted securely to a table or racing rig to minimize shifting or wobbling during aggressive race maneuvers.