High quality, moisture resistant (EN 204 D2) white wood adhesive for internal use. Dries transparent. Stronger than wood. For bonding and laminating of practically all hard, soft and exotic types of wood.

Suitable for:
For moisture resistant joining and laminating of practically all hard, soft and exotic types of wood.
Well-fitting, non-load bearing wooden structures using, for example, finger joints, dovetail joints, mortise and tenon joints, dowels and springs.
Indoor applications such as doors and furniture in, for example, living rooms and offices.
Surface bonding wood, hard and softboard, chipboard, multiplex plywood, MDF, paper, cardboard and hardboard.
Laminating veneer and hard plastic sheet (HPL, Formica, Duropal, Resopal) on a wooden surface.

EN 204 D2: Interior spaces in which increased relative humidity occurs occasionally and for a short time, whereby the level of wood humidity remains below 18%.

Working conditions: The ambient temperature, the adhesive and the materials to be bonded should be no less than +5°C. Relative humidity of up to 65%. Level of wood humidity between 8% and 12%.
Surface requirements: The surfaces to be bonded need to be clean, dry and free of dust. Ensure a well-fitting joint.
Preliminary surface treatment: Degrease oily types of wood with thinner.

Tools: Fine-toothed glue spreader (1 mm), brush or roller, clamp or press.
Dilute: Dilute only with water.
Coverage: 2-4 m²/kg, applied on both sides, depending on the nature of the materials.

Directions For Use:
Apply the adhesive with a brush or some other tool in an even and thin layer on one or both parts.
Let penetrate for a few minutes, assemble the parts within 10 minutes and clamp or press for 4-15 minutes.
The desired pressure is 2-5 kg/cm².
Stains/residue: Remove adhesive residues immediately with water. Dry adhesive residue can only be removed mechanically.

Storage conditions: Close container properly and store in a dry, cool and frost-free place.

Little circles of double-sided, clear adhesive which exhibit high tack, offering secure bonds to almost anything including paper, wood, plastic, metal, glass and painted surfaces. These non-yellowing dots are designed to provide a permanent hold and the bond strength will increase over time. They are easy to use, acid and lignin free, making them ideal for use in the home, office and school as an alternative to drawing pins, staples or tape. They are solvent free and non-toxic. Bostik Glu Dots are also available in a REMOVABLE version, for non-permanent applications.

Little circles of double-sided, clear adhesive which stick almost anything including paper, wood, plastic, metal, glass and painted surfaces. These non-yellowing dots are easy to use, acid and lignin free, making them ideal for use in the home, office and school as an alternative to drawing pins, staples or tape. They are solvent free and non-toxic. Bostik Glu Dots are also available in an EXTRA STRENGTH version, for permanent applications.

Pritt Multi Tack is the ideal alternative to pins or tape as they are non-permanent and guarantee the easy removal of posters, paper, greeting cards or other light items of up to 250g (per adhesive strip) adhered to walls, doors, or windows.

Applications: Paper, cardboard, photos.

Features:
- Provides strong adhesive power that keeps the content stuck together for a long time
- Solvent-free formula promotes safe use
- Ideal for arts and crafts projects
- Quickly dries up for an instant result
- Non-toxic
- Rotate-open applicator for precise and smooth glue dispensing
- 500ml Bottle

What's in the box
1 x 500ml Glue

Fast Bonding: Hot melt glue sticks provide a quick bond

Versatility: They work well with various materials such as wood, plastic, metal, fabric, and ceramics

Ease of Use: The glue is easy to apply with a glue gun

Strong Adhesion: Once cooled, the glue forms a strong, durable bond that can withstand stress and strain, ensuring long-lasting results.

Cost-Effective: Glue sticks are generally affordable, providing a cost-effective solution for both small and large projects.

Clean Application: The glue is designed to be non-toxic and less messy than some other adhesive options, making it safer and easier to handle.

Minimal Waste: Since hot melt glue sticks can be precisely applied, there's less wasted adhesive compared to liquid glues.

What's in the box
10 x Hot Melt Glue Stick (11mmx200mm)

Ultra-fast and extremely strong liquid super glue in 3 single mini tubes. The originally sealed tubes always provide the right dose of perfect, ready-to-use glue quality. Packed in a solid storage box. The liquid adhesive flows into smallest corners and joints. Dishwasher proof and water resistant.

Suitable for:
Ideal for small-area bonds.
Glues almost all solid and flexible materials like many plastics (such as rigid PVC, ABS, PS, Plexiglas®, polycarbonate (Makrolon®), and phenolic resins (Bakelite®)), porcelain, ceramics, leather, metal, wood, cork, felt, cloth (check suitability first), and rubber.
Only partly suitable for glass (over a certain period of time the bond becomes brittle, causing it to weaken).

Not suitable for: PE, PP, silicone resins, PTFE, Styrofoam®, fabrics and leather clothing.

Working conditions: Do not use at temperatures below +10 °C. The glue responds best to an air humidity level of 50-70 %.
Surface requirements: Surfaces to be glued must be clean, dry, and free of dust and grease, and must fit exactly.
Preliminary surface treatment: Any dust, oil, grease, wax or separating agent should be thoroughly removed from the surfaces to be stuck together. The best way to achieve this is to rub the parts a number of times with appropriate solvents, such as acetone (if suitable for the material – check first!). For metals and metal alloys it is usually sufficient to roughen the surface using emery paper or by grinding or brushing.

Directions For Use
1. To pierce the membrane, turn the cap clockwise firmly onto the tube. Tip: do not press the tube while piercing.
2. Unscrew the cap to reveal the applicator. Apply the adhesive directly from the tube, using the nozzle, as thinly as possible onto one side (too much glue slows down the curing process significantly).
3. Press parts together immediately.

After use (if tube not yet empty), clean nozzle with a dry tissue and replace cap.

Advice
When glueing at low humidity, curing time can be shortened by briefly breathing onto one of the parts to be assembled. The best glueing results are reached at room temperature.

Points of attention
Contains cyanoacrylate. Bonds skin and eyelids together in seconds.
If product comes into contact with the eyes, rinse immediately with plenty of water and seek medical advice.
In case of contact with skin, glue can be dissolved by soaking in warm soapy water.
Then apply a skin cream.
May cause respiratory irritation.
Avoid breathing vapours.
Keep out of the reach of children.
Stains/residue: Wipe off excess glue immediately with a dry cloth. After curing, glue residue is very difficult to remove. Acetone will dissolve glue but very slowly (check suitability first).

Storage conditions: Store in a dry, cool, frost-free place. Storage below +5 °C (in refrigerator) ensures maximum shelf life.

Features:
- Short heat-up period.
- EU plug standard.
- 3 Free glue sticks.
- Precise nozzle to apply evenly.
- Trigger mechanism which helps the glue to be applied easily.
- Plastic covered nozzle to avoid injury from heat.

What's in the box
1 x Glue gun
3 x Glue sticks

ELMERS Clear Glue 147ml Bottle Perfect for SLIME

Dala Construction Glue is a non-toxic liquid, white glue that dries to an opaque finish. It is a heavy duty craft glue and is ideal for school project use.

Dala Supersize Glitter Glue is filled with beautiful, rich glitter and an acid free adhesive making it perfect for paper and cardstock projects, scrapbooking applications, collage and craft embellishment.

Teddy Glitter Glue is a craft favourite. It's acid free and non toxic, available in these handy 5 x 10ml glue pen packs. Perfect for adding the finishing touch to most craft projects. Metallic Glitter Glue Pack: Silver, Gold and Rich Gold

Dala Paper Glue is a non-toxic, clear, liquid glue that is suitable for all school and office paper and cardstock projects.
Can be further diluted with water for paper mache and similar projects.

Dala Art Mount Spray is a clear spray adhesive and is best suited to bonding lightweight materials instantly. It offers a temporary OR a permanent bond, depending on your desired result. Ideal for paper projects (collage); scrapbooking and artwork or photograph mounting.