Super-strong universal contact adhesive based on neoprene rubber. For innumerable repair and DIY jobs that require immediate bonding. Extremely suitable for materials under strain. Moisture and frost proof. Resistant to temperatures between -15 °C and +70 °C.

Suitable for:
Ideally suited for surface bonding or laminating of many materials that require immediate bonding, loading or processing.
Bonds wood, board, veneer, plastic and metal panel boards (HPL, Formica®, for example), (foam) rubber, leather, cork, canvas, linoleum and polyether foam (sound insulation), among other things, to itself as well as to many other surfaces.
Also for repairing shoes, bags, toys and carpets, or for doing (hobby) handicraft work.

Not suitable for: Polystyrene foam (Tempex®), PE, PP, PTFE and vinyl.

Working conditions: Use adhesive and parts to be bonded at room temperature only. The relative humidity must be below 65 %. This is to avoid formation of bubbles in the final product. Once attached, adjustment is no longer possible. Always test on an (inconspicuous) part of the surface first.
Surface requirements: Surfaces must be dry, clean, dust- and grease-free and a good fit.
Preliminary surface treatment: Clean and degrease the surfaces to be bonded for optimal results.
Tools: Use a solid brush or fine-toothed (1 mm) glue spreader to cover large surfaces. Use a roller or rubber mallet to join the materials firmly.
Preparation of product: Stir well before use. Should preferably not be diluted
Coverage: 2 - 2.5 m²/litre, applied on both sides, depending on the nature of the materials to be bonded.

Directions For Use
Parts must be clean, dry and free of grease.
Coat both substrates completely.
Allow to dry for a minimum of 10 - 40 minutes.
In case of porous materials, apply a second coat and let dry.
Then join parts and roll or tap firmly (with a rubber mallet).

Points of attention
For optimum results, both the adhesive and the parts to be bonded must be at room temperature (definitely do not use below +10 °C).
The final bonding strength depends on the pressure applied.
Therefore, press as firmly as possible across the entire surface.
Should the adhesive joint between porous materials be exposed to long-lasting contact with water, the adhesive may detach from the wet surface.
Stains/residue: Remove fresh adhesive residue immediately with Acetone. Dried adhesive residue can only be removed mechanically or with a paint remover (test first).

Storage conditions: Store properly closed in a cool and frost-free place. Shelf life is a minimum 24 months.

Couture Creations Glue Spots are perfect for use in adhering paper, photos, plastic, metals and more!

Couture Creations Glue Spots are perfect for use in adhering paper, photos, plastic, metals and more!

A viscous hydrocarbon based adhesive remover formulated for the fast, and easy removal of sticky, gummy adhesive residue from non-porous surfaces and some fabrics. The gel formula is non drip and holds to surfaces allowing the proprietary solvent and surfactant blend to penetrate the adhesive residue. Bostik Glu GO acts by softening the adhesive residue allowing for its easy removal. Effective on a wide variety of adhesive and sealant technologies, including solvent based and urethane adhesives. Removes Contact Adhesive, Prestik, wax, chewing gum, correction fluid and tacky residues from labels and tapes. Has a mild solvent odour with a citrus undertone.

PATTEX contact adhesives are heat resistant, flexible ,spread easily and bond fast. It is suitable for use on most materials and is Toluene free , creating a safer working environment.

Dala Glitter Paper Liners are professional quality, sparkly, concentrated glitter products. Perfect for outines and fine detail work on paper, cardstock and canvas.

Hot Melt Glue Guns work in conjunction with Glue Gun Cartridges. The cartridges are cylindrical sticks of solid glue that melt when pushed through the glue gun.

The glue is tacky when hot, and solidifies in a few seconds to one minute. Hot melt adhesives can also be applied by dipping or spraying, and are popular with hobbyists and crafters both for affixing and as an inexpensive alternative to resin casting.

Once heated, the glue squeezed out of the nozzle is initially hot enough to burn and even blister skin. 

In general, hot melts are applied by extruding, rolling or spraying, and the high melt viscosity makes them ideal for porous and permeable substrates. The melted glue will bond to an array of different substrates including: rubber, ceramics, metals, plastics, glass and wood. 

Dala Jewel bond is a liquid, white glue that sets clear. It is a flexible embellishing glue for the adhesion of glitter, sequins, rhinestones, beads and other materials to fabric.

Dala Paper Glue is a non-toxic, clear, liquid glue that is suitable for all school and office paper and cardstock projects. Can be further diluted with water for paper mache and similar projects.

Hot Melt Glue Guns work in conjunction with Glue Gun Cartridges. The cartridges are cylindrical sticks of solid glue that melt when pushed through the glue gun.

The glue is tacky when hot, and solidifies in a few seconds to one minute. Hot melt adhesives can also be applied by dipping or spraying, and are popular with hobbyists and crafters both for affixing and as an inexpensive alternative to resin casting.

Once heated, the glue squeezed out of the nozzle is initially hot enough to burn and even blister skin. 

In general, hot melts are applied by extruding, rolling or spraying, and the high melt viscosity makes them ideal for porous and permeable substrates. The melted glue will bond to an array of different substrates including: rubber, ceramics, metals, plastics, glass and wood. 

A ready to use wood glue for most kinds of woods, for assembling and repair jobs. The bonds produced are slightly flexible and have a clear glue line. Suitable for DIY, hobby, craft and school projects. Dries fast, clear and strong.

ELMERS White Liquid School Glue 225ml Bottle Perfect for SLIME

ELMERS White Liquid School Glue 946ml Bottle Perfect for SLIME

Electrify arts, crafts, and slime with the neon shine of Elmer’s Glow-in-the-Dark Liquid Glue. While bright in the day, this craft glue truly comes to life at night, lighting up with a luminous neon glow. It’s also great for making glue slime—just mix with a few common household ingredients like baking soda and contact solution. Washable, safe, and nontoxic, Elmer's glue is an easy, mess-free way to get creative for arts and craft projects. Whether used for decorating, painting, gluing, or making slime, the possibilities are endless.

ELMERS Glitter Glue 177ml Orange Perfect for SLIME

Couture Creations is the culmination of 20 years of experience in the scrapbooking industry. From its final inception in 2010, Couture Creations has been devoted to producing expertly designed, high quality products overseen by veteran designers & crafters for a result that is both simple and elegant.