Polyvinyl acetate based adhesive, which has been developed to provide superior performance for art and crafts and school projects where it bonds a wide variety of substrates and dries to a touch glue- that meets SANS 10183:2009 D2 standard.

Bostik Paper Glue is a clear, non-toxic, odourless multi-purpose craft glue. This polyvinyl acetate (PVA) based adhesive dries clear and bonds paper, cardboard and small wooden objects and is perfect for craft, scrapbooking and school projects. It provides excellent adhesion to porous materials such as paper, wood, felt, cardboard, cellophane, photographic paper, and cork. Fair adhesion of above materials to metals and glass.

Can be mixed with powder paints for finger painting.

Not suitable for bonding plastics and some coated papers e.g. wax coated, polyethylene laminated paper.

Bostik Clear is a strong, fast drying, multi-purpose adhesive designed to give good adhesion to a wide variety of household materials. Exhibits excellent adhesion to many materials such as paper, cardboard, leather, ceramics, glass, wood, fabrics, rubber, felt, metal, and some plastics like rigid PVC and Perspex. This fast drying general purpose glue is a must have for home, school and office work, where it can be used for art and crafts, scrapbooking, photo albums, school projects, handicraft and decorative work, greeting cards, invitations, paper decorations and general DIY tasks where quick repairs are required. It is acid free and will not yellow or damage paper.

Not be used on painted or polished surfaces. Not suitable for use on some plastics like polyethylene, polypropylene, polystyrene plastics, rayon and acetate fabrics. Should not be used for the repair of pottery handles or any items that may contain hot liquids. Ensure that at least one of the two surfaces to be adhered is porous.

Bostik Clear is flammable. Always work in a ventilated area. Do not breathe in vapours. Avoid exposing product to any ignition sources and do not smoke when working with the product.

Bostik Clear Gel is a non-drip gel formulated fast drying, multi-purpose adhesive designed to give good adhesion to a wide variety of household materials. Exhibits excellent adhesion to many materials such as paper, cardboard, leather, ceramics, glass, wood, fabrics, rubber, felt, metal, and some plastics like rigid PVC and Perspex. Clear Gel Adhesive is a must have for home, school and office work, where it can be used for art and crafts, scrapbooking, photo albums, school projects, handicraft and decorative work, greeting cards, invitations, paper decorations, bonding of electrical/alarm cabling and general DIY tasks where quick repairs are required. It is acid free and will not yellow or damage paper.

Not be used on painted or polished surfaces. Not suitable for use on some plastics like polyethylene, polypropylene, polystyrene plastics, rayon and acetate fabrics. Should not be used for the repair of pottery handles or any items that may contain hot liquids. Ensure that at least one of the two surfaces to be adhered is porous.

Bostik Clear Gel is flammable. Always work in a ventilated area. Do not breathe in vapours. Avoid exposing product to any ignition sources and do not smoke when working with the product.

Little circles of double-sided, clear adhesive which stick almost anything including paper, wood, plastic, metal, glass and painted surfaces. These non-yellowing dots are easy to use, acid and lignin free, making them ideal for use in the home, office and school as an alternative to drawing pins, staples or tape. They are solvent free and non-toxic. Bostik Glu Dots are also available in an EXTRA STRENGTH version, for permanent applications.

Bostik Clear is a strong, fast drying, multi-purpose adhesive designed to give good adhesion to a wide variety of household materials. Exhibits excellent adhesion to many materials such as paper, cardboard, leather, ceramics, glass, wood, fabrics, rubber, felt, metal, and some plastics like rigid PVC and Perspex. This fast drying general purpose glue is a must have for home, school and office work, where it can be used for art and crafts, scrapbooking, photo albums, school projects, handicraft and decorative work, greeting cards, invitations, paper decorations and general DIY tasks where quick repairs are required. It is acid free and will not yellow or damage paper.

Not be used on painted or polished surfaces. Not suitable for use on some plastics like polyethylene, polypropylene, polystyrene plastics, rayon and acetate fabrics. Should not be used for the repair of pottery handles or any items that may contain hot liquids. Ensure that at least one of the two surfaces to be adhered is porous.

Bostik Clear is flammable. Always work in a ventilated area. Do not breathe in vapours. Avoid exposing product to any ignition sources and do not smoke when working with the product.

Bostik Clear Gel is a non-drip gel formulated fast drying, multi-purpose adhesive designed to give good adhesion to a wide variety of household materials. Exhibits excellent adhesion to many materials such as paper, cardboard, leather, ceramics, glass, wood, fabrics, rubber, felt, metal, and some plastics like rigid PVC and Perspex. Clear Gel Adhesive is a must have for home, school and office work, where it can be used for art and crafts, scrapbooking, photo albums, school projects, handicraft and decorative work, greeting cards, invitations, paper decorations, bonding of electrical/alarm cabling and general DIY tasks where quick repairs are required. It is acid free and will not yellow or damage paper.

Not be used on painted or polished surfaces. Not suitable for use on some plastics like polyethylene, polypropylene, polystyrene plastics, rayon and acetate fabrics. Should not be used for the repair of pottery handles or any items that may contain hot liquids. Ensure that at least one of the two surfaces to be adhered is porous.

Bostik Clear Gel is flammable. Always work in a ventilated area. Do not breathe in vapours. Avoid exposing product to any ignition sources and do not smoke when working with the product.

Dala Craft Glue is a liquid, white glue that dries slightly opaque. It is an acid free, non-toxic multi-purpose adhesive that adheres to most surfaces. Ideal for crafting and scrapbooking.

Polyvinyl acetate based adhesive, which has been developed to provide superior performance for art and crafts and school projects where it bonds a wide variety of substrates and dries to a touch glue- that meets SANS 10183:2009 D2 standard.

The perfect way to create sparkling decorations and cards. Glitter is supplied premixed in a glue pen enabling it to be applied and stuck onto paper in one simple action. The product dries clear with uniformly and finely dispersed glitter. Bostik Rainbow Glitter Glue is acid free and will not yellow or damage paper.

Dala Glitter Paper Liners are professional quality, sparkly, concentrated glitter products. Perfect for outines and fine detail work on paper, cardstock and canvas.

Little circles of double-sided, clear adhesive which exhibit high tack, offering secure bonds to almost anything including paper, wood, plastic, metal, glass and painted surfaces. These non-yellowing dots are designed to provide a permanent hold and the bond strength will increase over time. They are easy to use, acid and lignin free, making them ideal for use in the home, office and school as an alternative to drawing pins, staples or tape. They are solvent free and non-toxic. Bostik Glu Dots are also available in a REMOVABLE version, for non-permanent applications.

High quality, moisture resistant (EN 204 D2) white wood adhesive for internal use. Dries transparent. Stronger than wood. For bonding and laminating of practically all hard, soft and exotic types of wood.

Suitable for:
For moisture resistant joining and laminating of practically all hard, soft and exotic types of wood.
Well-fitting, non-load bearing wooden structures using, for example, finger joints, dovetail joints, mortise and tenon joints, dowels and springs.
Indoor applications such as doors and furniture in, for example, living rooms and offices.
Surface bonding wood, hard and softboard, chipboard, multiplex plywood, MDF, paper, cardboard and hardboard.
Laminating veneer and hard plastic sheet (HPL, Formica, Duropal, Resopal) on a wooden surface.

EN 204 D2: Interior spaces in which increased relative humidity occurs occasionally and for a short time, whereby the level of wood humidity remains below 18%.

Working conditions: The ambient temperature, the adhesive and the materials to be bonded should be no less than +5°C. Relative humidity of up to 65%. Level of wood humidity between 8% and 12%.
Surface requirements: The surfaces to be bonded need to be clean, dry and free of dust. Ensure a well-fitting joint.
Preliminary surface treatment: Degrease oily types of wood with thinner.

Tools: Fine-toothed glue spreader (1 mm), brush or roller, clamp or press.
Dilute: Dilute only with water.
Coverage: 2-4 m²/kg, applied on both sides, depending on the nature of the materials.

Directions For Use:
Apply the adhesive with a brush or some other tool in an even and thin layer on one or both parts.
Let penetrate for a few minutes, assemble the parts within 10 minutes and clamp or press for 4-15 minutes.
The desired pressure is 2-5 kg/cm².
Stains/residue: Remove adhesive residues immediately with water. Dry adhesive residue can only be removed mechanically.

Storage conditions: Close container properly and store in a dry, cool and frost-free place.

Bostik Clear is a strong, fast drying, multi-purpose adhesive designed to give good adhesion to a wide variety of household materials. Exhibits excellent adhesion to many materials such as paper, cardboard, leather, ceramics, glass, wood, fabrics, rubber, felt, metal, and some plastics like rigid PVC and Perspex. This fast drying general purpose glue is a must have for home, school and office work, where it can be used for art and crafts, scrapbooking, photo albums, school projects, handicraft and decorative work, greeting cards, invitations, paper decorations and general DIY tasks where quick repairs are required. It is acid free and will not yellow or damage paper.

Not be used on painted or polished surfaces. Not suitable for use on some plastics like polyethylene, polypropylene, polystyrene plastics, rayon and acetate fabrics. Should not be used for the repair of pottery handles or any items that may contain hot liquids. Ensure that at least one of the two surfaces to be adhered is porous.

Bostik Clear is flammable. Always work in a ventilated area. Do not breathe in vapours. Avoid exposing product to any ignition sources and do not smoke when working with the product.

Features:
- Provides strong adhesive power that keeps the content stuck together for a long time
- Solvent-free formula promotes safe use
- Ideal for arts and crafts projects
- Quickly dries up for an instant result
- Non-toxic
- Rotate-open applicator for precise and smooth glue dispensing
- 500ml Bottle

What's in the box
1 x 500ml Glue

Fast Bonding: Hot melt glue sticks provide a quick bond

Versatility: They work well with various materials such as wood, plastic, metal, fabric, and ceramics

Ease of Use: The glue is easy to apply with a glue gun

Strong Adhesion: Once cooled, the glue forms a strong, durable bond that can withstand stress and strain, ensuring long-lasting results.

Cost-Effective: Glue sticks are generally affordable, providing a cost-effective solution for both small and large projects.

Clean Application: The glue is designed to be non-toxic and less messy than some other adhesive options, making it safer and easier to handle.

Minimal Waste: Since hot melt glue sticks can be precisely applied, there's less wasted adhesive compared to liquid glues.

What's in the box
10 x Hot Melt Glue Stick (11mmx200mm)

Universal strong dual-component epoxy adhesive for repairing metal, pottery, porcelain, glass, pearls, precious stones and various synthetics. Temperature resistant, water resistant, chemical resistant and paintable.

Application
Suitable for: Repairs to metal, ceramics, porcelain, crystal, glass, pearls, precious stones and various synthetics (polyester, bakelite, formica, rigid polystyrene and acrylic glass (Perspex®).
Not suitable for: Polyethylene (PE), polypropylene (PP), PTFE and silicone rubber.

Handling
Before use: Working conditions- Only apply at temperatures between +10 °C and +35 °C. Product cures by mixing the resin and the hardener.
Surface requirements: The surface must be dry, clean and free of dust and grease.
Preliminary surface treatment: Degrease parts to be bonded with methylated spirit. Roughen smooth surfaces (sandpaper).
Tools: Mix the components by means of the supplied mixing bowl and spatula.
Mixture ratio: 1:1
Coverage: 1 ml = approx 10 cm² at a film thickness of 1 mm

Directions For Use:
Press out an equal amount of both components onto the enclosed mixing tray.
Mix these two equal parts well with a spatula until a mixture is obtained with a homogeneous colour.
Apply the mixture, which at room temperature (+20 °C) remains toolable for about 1.5 hours, as a thin layer on one of the two materials.
Join the materials and keep them in place for 7 hours.
Be careful not to move the parts before the adhesive has cured.
Resin and hardener must not come into contact with each other unless for usage.

Advice
Some types of synthetics can not be joined such as polyethylene and polypropylene. Use a piece of adhesive tape in order to keep the parts in place while the adhesive is curing.

Points of attention
Close well after use.
For optimum performance it is important to create a larger amount of adhesive and mix it very well.
Curing time depends on the temperature.
Adhesive does not cure below +5 °C.
Stains/residue: Remove wet stains immediately with warm water and soap. Cured adhesive residue can only be removed mechanically.

Storage conditions: Store in tightly closed packaging in a dry, cool and frost-free place.

Super-strong universal contact adhesive based on neoprene rubber. For innumerable repair and DIY jobs that require immediate bonding. Extremely suitable for materials under strain. Moisture and frost proof. Resistant to temperatures between -15 °C and +70 °C.

Suitable for:
Ideally suited for surface bonding or laminating of many materials that require immediate bonding, loading or processing.
Bonds wood, board, veneer, plastic and metal panel boards (HPL, Formica®, for example), (foam) rubber, leather, cork, canvas, linoleum and polyether foam (sound insulation), among other things, to itself as well as to many other surfaces.
Also for repairing shoes, bags, toys and carpets, or for doing (hobby) handicraft work.

Not suitable for: Polystyrene foam (Tempex®), PE, PP, PTFE and vinyl.

Working conditions: Use adhesive and parts to be bonded at room temperature only. The relative humidity must be below 65 %. This is to avoid formation of bubbles in the final product. Once attached, adjustment is no longer possible. Always test on an (inconspicuous) part of the surface first.
Surface requirements: Surfaces must be dry, clean, dust- and grease-free and a good fit.
Preliminary surface treatment: Clean and degrease the surfaces to be bonded for optimal results.
Tools: Use a solid brush or fine-toothed (1 mm) glue spreader to cover large surfaces. Use a roller or rubber mallet to join the materials firmly.
Preparation of product: Stir well before use. Should preferably not be diluted
Coverage: 2 - 2.5 m²/litre, applied on both sides, depending on the nature of the materials to be bonded.

Directions For Use
Parts must be clean, dry and free of grease.
Coat both substrates completely.
Allow to dry for a minimum of 10 - 40 minutes.
In case of porous materials, apply a second coat and let dry.
Then join parts and roll or tap firmly (with a rubber mallet).

Points of attention
For optimum results, both the adhesive and the parts to be bonded must be at room temperature (definitely do not use below +10 °C).
The final bonding strength depends on the pressure applied.
Therefore, press as firmly as possible across the entire surface.
Should the adhesive joint between porous materials be exposed to long-lasting contact with water, the adhesive may detach from the wet surface.
Stains/residue: Remove fresh adhesive residue immediately with Acetone. Dried adhesive residue can only be removed mechanically or with a paint remover (test first).

Storage conditions: Store properly closed in a cool and frost-free place. Shelf life is a minimum 24 months.