This title includes a number of Open Access chapters. This important book presents a selection of new research on wind turbine technology, including aerodynamics, generators and gear systems, towers and foundations, control systems, and environmental issues. This informative book: * Introduces the principles of wind turbine design * Presents methods for analysis of wind turbine performance * Discusses approaches for wind turbine improvement and optimization * Covers fault detection in wind turbines * Describes mediating the adverse effects of wind turbine use and installation

This title includes a number of Open Access chapters. Carbon capture and storage (CCS) refers to a set of technologies and methods for the mitigation, remediation, and storage of industrial CO2 emissions, the most imminent and virile of the greenhouse gases (GHG). The book addresses the methods and technologies currently being applied, developed, and most in need of further research. The book: * Discusses methods of carbon capture in industrial settings * Presents biological and geological approaches to carbon sequestration * Introduces ionic liquids as a method of carbon capture * Introduces new approaches to capturing CO2 from ambient air

The large-scale production of chemicals to meet various societal needs has created environmental pollution, including pollution from byproducts and improper disposal of waste. With the world facing adverse consequences due to this pollution, green chemistry is increasingly being viewed as a means to address this concern. Since most organic syntheses require toxic solvents, more reaction time, and drastic conditions of temperature, conventional methods of organic synthesis are less preferred. Microwave-assisted organic synthesis is considered to be a promising green chemical approach because it reduces reaction time from days or hours to minutes or even seconds, and has many other advantages. It helps reduce side reactions and increase yields, uses fewer solvents or is almost solvent-free, has solid supported reactions, and improves purity. This book's main focus is microwave-assisted organic synthesis processes, particularly various reactions such as cycloaddition, rearrangement, elimination, substitution, oxidation, reduction, condensation, coupling, polymerization, nanomaterials, synthesis of heterocycles, and industrial applications under microwave irradiation. The time is not far off when this methodology will virtually replace existing and cumbersome methods of organic synthesis.

Energy is one of the prime needs of the modern world, and energy demands have been rapidly increasing in the recent years owing to rapid advancements in industrialization and population explosion. Conventional fossil fuels are being depleted at rapid rates, and the use of conventional sources such as coal or nuclear sources cause several hazards to the environment. New sources of fuel, such as bioenergy, are an ideal option for fulfilling ever-increasing energy demands. This important book offers an exploration of these alternate fuel sources, including biohydrogen, microbial fuel cells, bioethanol, and biodiesel production, focusing on the challenges and factors hindering the real-time application of these bioenergy sources. Researchers all over the world are working in this energy sector, and this has led to drastic improvements in bioenergy research. However, the technology gap between research and industrial application still exists. This important book offers engineers and technologists from different disciplines valuable information on this multifaceted field. The field of bioenergy is interdisciplinary, requiring the knowledge of biologists, chemists, physicists, and engineers. Exploring the current trends and future prospects for biofuels, the information presented in this book will be valuable to the international industrial community for identifying new options to circumvent problems that exist in bioenergy applications. Topics include: * Thermophilic biohydrogen production * Bio-hydrogen production * Microbial fuel cells as a promising alternative energy source * Microbial fuel cell applications * Potential of Pscillatoria annae in producing bioethanol * Potential of lignocellulosic biofuels * Biodiesel production * Reactor designs for biodesel production * Long-term storage stability of Pongamia pinnata and Jatropha curcus biodiesel

Biofuel production from waste biomass is increasingly being focused on due to due to several advantages of lignocellulosic biomass, such as availability in abundance from several sources, cost-effectiveness, little competition with food sources, etc. This new volume, Sustainable Biofuel and Biomass: Advances and Impacts, provides an abundance of in-depth information on many types of biofuels from lignocellulosic biomass and also describes biomass sources and their availability for biofuel production. This compiled book features 17 chapters that discuss the different aspects of biofuel production from lignocellulosic biomass. Chapters deal with different types lipase-mediated biofuel production, biohydrogen production from lignocellulosic biomass, triacylglycrol biosynthetic pathways in plants for biofuel applications, the industrial prospects of lignocellulosic bioethanol production, biofuel cell production, potential feedstocks availability for bioethanol production, biofuel production from algal biomass, and many other important topics.

This title includes a number of Open Access chapters. The practice of converting corn to ethanol is controversial, with debates currently being raged in both public policy and science. While biofuels from corn have important implications in alleviating some of the global energy crisis, critics argue that it takes away from vital agricultural products needed to feed the world's growing population. The current volume maintains there is a third way, a method of producing biofuel that only uses biomass that is left behind after all agricultural and nutritional products have been harvested from corn. This biomass is referred to as corn stover. The book serves as an important introduction to this method of producing biofuels from agricultural waste. Edited by a professor from the State University of New York, Geneseo, this reference is important not only for research scientists, but for students and public policy makers who wish to learn more about this alternative method of producing ethanol from corn. The sections found in Fuel Production from Non-Food Biomass: Corn Stover describe the following topics: An overview of why corn stover is a good alternative use of power The technology that makes this process possible on various scales Considerations for policy formation, including economic, land-use, and environmental arguments for and against using corn stover as a biofuel Although controversy still exists about the use of corn stover-with some critics saying that it will cause food shortages, particularly for developing nations-the research in this book focuses on using corn's already existing, non-food biomass and argues that food and biofuel could potentially be produced from the same fields.

This title includes a number of Open Access chapters. Toward a Sustainable Wine Industry: Green Enology in Practice takes a broad look at the emerging trend of using sustainable wine production methods and business practices. It covers a multitude of aspects of the sustainable wine industry, including production methods, recycling efforts, customer behavior, sustainable business practices, and more. The wine sector, which plays a big role in the agricultural industry around the world, has been facing increasing pressure to fulfill legal environmental requirements while maintaining a competitive position in a global market. Concern for the environment and rising costs have led to an increased interest in sustainable wine production practices. This valuable compendium addresses this trend and looks at different sectors within the wine industry. In all, the book provides a multi-faceted examination of the important aspects of the increasingly necessary and growing sustainable movement. The book aims to shed valuable light on how to build an integrated sustainable business and development system in the wine industry.

This title includes a number of Open Access chapters. As the world's energy hunger grows ever larger, fossil fuel reserves are diminishing-and concerns about climate change remind us that our love affair with fossil fuels cannot continue much longer. This has inspired intense research into sustainable energy sources. Biofuels seemed initially promising, but the world soon realized that food-based biofuel has its own dangers. Second-generation biofuels, however, use biomass from crops' inedible parts-such as the stalks and leaves of sugarcane-offering a far more practical, sustainable, and commercially viable solution. In this book, researchers from around the world review some of the most important and timely topics related to using sugarcane feedstock for biofuel. After a basic overview, topics such as these are included: Pretreatment methods The use of various microbial technologies, including bacteria and yeast, to enhance biofuel production Environmental impacts Economic feasibility The viability of electricity being produced side by side with biofuel Essential reading for graduate students and research scientists investigating second-generation biofuels, this book is also recommended for environmentalists, environmental engineers, and microbiologists.

This title includes a number of Open Access chapters. The world needs renewable and clean forms of energy. Biofuels offer an alternative to fossil fuels, but first-generation biofuels had many challenges to be overcome. One strategy that second-generation biofuels are employing is microbial technology. This compendium volume gathers together recent investigations within this vital field of research. It offers: An overview of the topic Investigations into the varieties of microorganisms useful for this technology Pretreatment methodologies Genetic engineering research that will further this technology Internationally recognized experts contribute chapters on their individual areas of research within this vital field of study. The book offers an authoritative platform from which graduate students and scientists can build future investigations that will create still more advanced biofuels.

This title includes a number of Open Access chapters. The world's interest in reducing petroleum use has led to the rapid development of the biofuel industry over the past decade or so. However, there is increasing concern over how current food-based biofuels affect both food security and the environment. Second-generation biofuels, however, use widely available sources such as non-food lignocellulosic-based biomass and fats, oils, and greases. They make practical consideration of how land use can simultaneously support both the world's food needs and some of its energy needs. This volume consolidates some of the most recent investigations into these issues. The chapters focus on these categories of research: The problems currently connected with biofuels relating to land use and the environment Investigations into the potential for land use to be managed more effectively and sustainably Research that focuses on new and developing options for second-generation biofuels This volume is recommended for all biofuel researchers, from the PhD student to the experienced scientist. It also offers an essential foundation to anyone interested in how biofuels relate to the future of our world.

Green Polymers and Environment Pollution Control examines the latest developments in the important and growing field of producing conventional polymers from sustainable sources. Presenting cutting-edge research from a group of leading international researchers from academia, government, and industrial institutions, the book explains what green polymers are, why green polymers are needed, which green polymers to use, and how manufacturing companies can integrate them into their manufacturing operations. It goes on to provide guidelines for implementing sustainable practices for traditional petroleum-based plastics, biobased plastics, and recycled plastics. With recent advancements in synthesis technologies and the discovery of new functional monomers, research shows that green polymers with better properties can be produced from renewable resources. The book describes these advances in synthesis, processing, and technology. It provides not only state-of-the-art information but also acts to stimulate research in this direction. Green Polymers and Environment Pollution Control offers an excellent resource for researchers, upper-level graduate students, brand owners, environment and sustainability managers, business development and innovation professionals, chemical engineers, plastics manufacturers, agriculture specialists, biochemists, and suppliers to the industry to debate sustainable, economic solutions for polymer synthesis.

This title includes a number of Open Access chapters. Sustainability demands that we meet the needs of our present world without compromising the needs of future generations. As a result, sources and methodologies for renewable energy are being urgently investigated. Biomassoffers one of the most readily implemented, low-cost alternatives to fossil fuels. First-generation biofuels proved to have limited sustainability, but today's advanced biofuels are developing more efficient processes. This book contains the latest research on catalytic processing, a promising technology for making biofuel production truly sustainable. Included here are: Several overview chapters, describing analytic methods for assessing catalytic sustainability. Chapters that investigate several reaction routes for sustainable catalytic conversion. A final chapter on methodologies for optimizing catalytic reactions. Written for readers with university-level understanding of chemistry, biology, and engineering, this compendium volume offers evidence that catalytic processing is a flexible and sustainable methodology for the conversion ofbiomass platforms. The editor, one of the leading figures in this area of study, has collected research that covers key issues of interest to fuel and energy technologists and engineers. The comprehensive coverage of current research will also offer scientists a solid foundation for future research in this critical field of investigation.

This title includes a number of Open Access chapters. Wind power is one of the fastest developing sources of renewable energy. It makes substantial contributions to power grids around the globe, and it promises to play a prominent role in the world's future energy security. Given that reality, there is an ongoing need for research that investigates the potential of specific regions for wind-farm development, combined with the social, economic, and environmental impacts of that development. This compendium contains the most recent research on these topics from around the world. The chapters are organized into three parts: The potential of wind power in selected regions of the world Social, economic, and environmental factors that influence wind development Current trends within the wind industry and the challenges it must face to contribute to the world's future energy security With its distinguished editor and international team of contributors, this book is a valuable resource for researchers and university-level students investigating this expanding field of study. It will also be a useful reference book for wind-power engineers, technicians, and planners.

This title includes a number of Open Access chapters. The information contained in this compendium volume sets the stage for the future's large-scale production of biofuels. Biomass is an abundant carbon-neutral renewable feedstock for producing fuel. First-generation biofuels gained attention for their problems, but the authors of this book demonstrate that they are well on their way to creating practical and sustainable second-generation biofuels. The book begins with an introduction to synthetic biology. Next, it covers pretreatment technologies, advanced microbial technologies, genetic engineering as it relates to biofuel technologies, and nanotechnology and chemical engineering in relation to biofuels. Well-respected in his field, the editor's firsthand experience gives him the perspective to create a thorough review of the relevant literature. Each chapter is written by experts in biotechnologies, offering graduate and post-doctorate students, as well as other scientific researchers, a wide-angle look at biofuel technologies. At the same time, this volume points to promising directions for new research.

This title includes a number of Open Access chapters. The number of tight oil and shale gas wells continues to rise primarily in the US, but also worldwide. The US has vast reserves of oil and natural gas, which now are commercially reachable as a result of advances in horizontal drilling and hydraulic fracturing technologies. But as hydraulic fracturing is increasingly used, concerns have been raised about potential stress on surface water and groundwater supplies from the withdrawal of water used in the process. Equally important is the growing volume of wastewater generated from hydraulically fractured oil and gas wells, requiring recycling, treatment, and disposal. Wastewater and Shale Formation Development: Risks, Mitigation, and Regulation examines four major issues, taking a scientific look from different perspectives at water use in shale gas development, potential environmental effects of wastewater from fracking, how to mitigate potential risks associated with wastewater from shale development, and regulatory approaches to the wastewater management problem With chapters from researchers in the field, this compendium volume sheds light on the important issues and challenges surrounding natural gas extraction using hydraulic fracturing and may be of interest to researchers and public policymakers alike.

This title includes a number of Open Access chapters. The quantity and quality of waste generated and discharged into natural water bodies is a topic of serious concern. Consequently, there is a need for different strategies to address wastewater treatment and subsequent reuse, especially in arid and semi-arid areas where water shortages are the rule. Biological treatment processes constitute crucial tools in the biodegradation of organic matter, transformation of toxic compounds into harmless products, and nutrient removal in wastewater microbiology. Edited by a professor of genetics and microbiology with extensive research, this compendium provides an overview of the most current research into many facets of wastewater bioremediation. The book is broken into three sections: microbial communities for wastewater treatment, environmental factors, and treatments. It provides discussions on biological treatment processes for different types of wastewater, such as municipal wastewater and wastewater from tanneries; how environmental factors such as season dynamics affect the diversity of bacteria; and applications and treatment. The range of topics presented will be valuable for biological engineers and others involved with wastewater management. Researchers will find a wealth of studies that will prove fruitful for future investigation.

This important new book covers recent advancements, innovations, and technologies in industrial biotechnology, specifically addressing the application of various biomolecules in industrial production and in cleaning and environmental remediation sectors. The goal of industrial biotechnology is to develop new techniques and technologies to transform renewable raw materials into chemicals, materials, and fuels by the substitution of fossil fuels. With the increase in the world's population and the resultant growing energy demand, the need for more energy can be successfully met with the advancements in industrial biotechnology. Currently across the globe significant research has been undertaken in the production of cleaner fuels, materials, and semi-synthetic chemicals, with environmental benefits. Developing countries have huge agricultural resources that could be utilized for production of value-added byproducts for the sustainable development of bio-based economy. The book opens with the chapter on the production of exopolysaccharides from halophilic microorganisms, a polymer that is normally very useful in various production sectors of the food, pharmaceutical, and petroleum industries. The book goes on to cover: The production of antimicrobial compounds from alkaliphilic bacteria Thermophilic actinomycetes Food, agro, and pharmaceutical potential and biotechnological applications of biosurfactants, halophiles, cyclodextrin glycosyl transferease, fungal chitinase, proteases, yeasts and yeast products Also covered in the book are the environmental aspects of industrial biotechnology such as the genetic enhancement for biofuel production, the production of biodegradable thermoplastics, advancements in the synthesis of bio-oil, ecofriendly treatment of agro-based lignocelluloses, and anaerobic bio reactors for hydrocarbon remediation. The international roster of chapter authors have been chosen for their renowned expertise and contribution to the various fields of industrial biotechnology. This book is suitable to chemists, biotechnologists from research institutes, academia, and students as well as for industry professionals

This title includes a number of Open Access chapters. Edited by a leading researcher in the field, this book provides an overview of waste valorization and includes the editor's research in addition to other experts and recent and relevant studies on this critical topic. It covers treatment and pretreatment technologies and methodologies, energy recovery from solid wastes, recycling and reuse, additional cutting-edge valorization methodologies. Primarily aimed at researchers and advanced students in biochemical, engineering, and environmental fields, this book should also provide a valuable reference for municipal legislators and industry practitioners.

This book covers three main types of agricultural systems: the use of robotics, drones (unmanned aerial vehicles), and satellite-guided precision farming methods. Some of these are well refined and are currently in use, while others are in need of refinement and are yet to become popular. The book provides a valuable source of information on this developing field for those involved with agriculture and farming and agricultural engineering. The book is also applicable as a textbook for students and a reference for faculty.

In this valuable volume, new and original research on various topics on chemical engineering and technology is presented on modeling and simulation, material synthesis, wastewater treatment, analytical techniques, and microreactors. The research presented here can be applied to technology in food, paper and pulp, polymers, petrochemicals, surface coatings, oil technology aspects, among other uses. The book is divided into five sections: modeling and simulation environmental applications materials and applications processes and applications analytical methods Topics include: modeling and simulation of chemical processes process integration and intensification separation processes advances in unit operations and processes chemical reaction engineering fuel and energy advanced materials CFD and transport processes wastewater treatment The valuable research presented here will be of interest to researchers, scientists, industry practitioners, as well as upper-level students.

This title includes a number of Open Access chapters. This compendium volume contains the most current technical and economic analyses of emerging waste disposal strategies. The editor, a well-respected researcher in this field, has selected articles that will be valuable to readers who range from engineers and academics to decision-makers in both the public and private sectors. Several international case studies give practical applications and examples of the various technologies and approaches. A final section discusses policy planning for the future.

This volume covers a diverse array of alternative technologies and their development with particular attention to the utilization of bioresources for the achievement of a sustainable environment. The book presents a selection of alternative technologies being used in developing and developed countries that can be indigenous to the region, cost-effective, and often driven by dominant societal interest and geographical status. Several engineering and technological processes are included to mark their importance in product performance and preservation of the environment. Topics cover: * strategies for the management of rain and ground water for consumption * wastewater treatment using indigenous techniques of phytoremediation * scientific and engineering approaches to the prevention of flood and landslides in the tropics * wind power generation * soil evaluation of contamination due to heavy metals * green and sustainable building approaches * bioethanol production * energy conservation techniques Refreshing and informative, Engineering and Technical Development for a Sustainable Environment revisits conventional approaches of managing natural agents (such as wind, rain and groundwater resources as well as wastewater treatment) in light of current sustainableoriented techniques using modern scientific concepts and strategies. It presents in-depth evaluations and analyses using systematic up-to-date scientific and engineering tools.

This book highlights advances in sustainable wastewater treatment technologies, particularly biological wastewater treatment, cavitation-based treatment, hybrid water treatment, membrane technologies, advance oxidation processes, and adsorption. The book focuses on a variety of advanced treatment techniques that are useful for the degradation of organic components, dyes, heavy metals effluent, etc. in wastewater. Industrial wastewater consists of variety of discharges based on the type of industry, such as the dairy/food industries, which generate more fats and high BOD value with variation in the pH value, while the electroplating industry may expel more inorganic matter and dissolved solids. The oil extraction industries will have more solvents contained in the effluent, and dyes and textiles industry create a higher organic load with high TDS. Hence, every type of manufacturing industry needs a different method for the treatment of its effluents. Looking at the use of intensified chemical processes in order to make cleaner environment, Innovative Technologies for the Treatment of Industrial Wastewater explores the new and innovative methods for pollutant removal that will prove useful for a variety of industries. Conventional wastewater treatment processes require a significant amount of energy and involve expensive equipment and maintenance. Sustainable wastewater treatment technologies, however, involve less generation of energy and employ more economically feasible treatment methods, requiring less equipment and fewer maintenance costs. Looking at the use of intensified chemical processes in order to make a cleaner environment, this volume explores new and innovative methods for pollutant removal that will prove useful for a variety of industries. This book highlights advances in sustainable wastewater treatment technologies, particularly biological wastewater treatment, cavitation-based treatment, hybrid water treatment, membrane technologies, advanced oxidation processes, and adsorption.

This title includes a number of Open Access chapters. Meteorological data are essential for both day-to-day energy management and for planning for the world's future energy security. The editor of this compendium, a mechanical engineer with international experience, has collected articles that will encourage more productive dialogue between the energy and meteorology communities. Included are chapters on how to generate a typical meteorological year, followed by articles that discuss the impact of meteorology on wind energy production, solar energy production, and hydropower operations. The book concludes with chapters on seasonal energy management.

This book provides technological and socio-economic coverage of renewable energy. It discusses wind power technologies, solar photovoltaic technologies, large-scale energy storage technologies, and ancillary power systems. In this new edition, the book addresses advancements that have been made in renewable energy: grid-connected power plants, power electronics converters, and multi-phase conversion systems. The text has been revised to include up-to-date material, statistics, and current technology trends. Three new chapters have been added to cover turbine generators, AC and DC wind systems, and recent advances solar power conversion. Discusses additional renewable energy sources, such as ocean, special turbines, etc. Covers system integration for solar and wind energy Presents emerging DC wind systems Includes coverage on turbine generators Updated sections on solar power conversion It offers students, practicing engineers, and researchers a comprehensive look at wind and solar power technologies. It is designed as a reference and can serve as a textbook for senior undergraduates in a one-semester course on renewable power or energy systems.