Dala Glass Stain is a solvent-based, transparent colour product with a high viscosity that is ideal for working on flat, smooth surfaces such as glass, perspex or acetate. The glaze dries to a flat, glossy finish that is level with the horizontal surface it's used on.

Use in conjunction with Dala Glass Liners.

 Please Note: Glass Stain is permanent.

Dala Glass Glaze is a water-based, transparent colour product (that can be made opaque by applying many layers) with a low viscosity that is ideal for working on smooth surfaces like glass, perspex or acetate.

The glaze reproduces the surface of the substrate perfectly, giving you a glass-like finish with no brush marks.

Dala Glass Glaze is a water-based, transparent colour product (that can be made opaque by applying many layers) with a low viscosity that is ideal for working on smooth surfaces like glass, perspex or acetate.

The glaze reproduces the surface of the substrate perfectly, giving you a glass-like finish with no brush marks.

Dala Glass Glaze is a water-based, transparent colour product (that can be made opaque by applying many layers) with a low viscosity that is ideal for working on smooth surfaces like glass, perspex or acetate.

The glaze reproduces the surface of the substrate perfectly, giving you a glass-like finish with no brush marks.

Dala Glass Glaze is a water-based, transparent colour product (that can be made opaque by applying many layers) with a low viscosity that is ideal for working on smooth surfaces like glass, perspex or acetate.

The glaze reproduces the surface of the substrate perfectly, giving you a glass-like finish with no brush marks.

Dala Glass Glaze is a water-based, transparent colour product (that can be made opaque by applying many layers) with a low viscosity that is ideal for working on smooth surfaces like glass, perspex or acetate.

The glaze reproduces the surface of the substrate perfectly, giving you a glass-like finish with no brush marks.

Dala Glass Glaze is a water-based, transparent colour product (that can be made opaque by applying many layers) with a low viscosity that is ideal for working on smooth surfaces like glass, perspex or acetate.

The glaze reproduces the surface of the substrate perfectly, giving you a glass-like finish with no brush marks.

Dala Glass Glaze is a water-based, transparent colour product (that can be made opaque by applying many layers) with a low viscosity that is ideal for working on smooth surfaces like glass, perspex or acetate.

The glaze reproduces the surface of the substrate perfectly, giving you a glass-like finish with no brush marks.

Dala Metallic Glass Liners are flexible, water-based glass paint products that are an accompaniment product to Dala Glass Stain and Glass Glaze colour products. Together these products can be used to create a "stained glass" effect.

Create outlines with Dala Glass Liners and then fill in the colour using either Glass Stain or Glass Glaze. Can be used to fill in detail work as well.

Dala Glass Glaze is a water-based, transparent colour product (that can be made opaque by applying many layers) with a low viscosity that is ideal for working on smooth surfaces like glass, perspex or acetate.

The glaze reproduces the surface of the substrate perfectly, giving you a glass-like finish with no brush marks.

Dala Glass Glaze is a water-based, transparent colour product (that can be made opaque by applying many layers) with a low viscosity that is ideal for working on smooth surfaces like glass, perspex or acetate.

The glaze reproduces the surface of the substrate perfectly, giving you a glass-like finish with no brush marks.

Dala Glass Glaze is a water-based, transparent colour product (that can be made opaque by applying many layers) with a low viscosity that is ideal for working on smooth surfaces like glass, perspex or acetate.

The glaze reproduces the surface of the substrate perfectly, giving you a glass-like finish with no brush marks.

Dala Glass Glaze is a water-based, transparent colour product (that can be made opaque by applying many layers) with a low viscosity that is ideal for working on smooth surfaces like glass, perspex or acetate.

The glaze reproduces the surface of the substrate perfectly, giving you a glass-like finish with no brush marks.

Dala Glass Glaze is a water-based, transparent colour product (that can be made opaque by applying many layers) with a low viscosity that is ideal for working on smooth surfaces like glass, perspex or acetate.

The glaze reproduces the surface of the substrate perfectly, giving you a glass-like finish with no brush marks.

Dala Glass Glaze is a water-based, transparent colour product (that can be made opaque by applying many layers) with a low viscosity that is ideal for working on smooth surfaces like glass, perspex or acetate.

The glaze reproduces the surface of the substrate perfectly, giving you a glass-like finish with no brush marks.

Dala Glass Glaze is a water-based, transparent colour product (that can be made opaque by applying many layers) with a low viscosity that is ideal for working on smooth surfaces like glass, perspex or acetate.

The glaze reproduces the surface of the substrate perfectly, giving you a glass-like finish with no brush marks.

Dala Glass Glaze is a water-based, transparent colour product (that can be made opaque by applying many layers) with a low viscosity that is ideal for working on smooth surfaces like glass, perspex or acetate.

The glaze reproduces the surface of the substrate perfectly, giving you a glass-like finish with no brush marks.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

Quality:

Transparent, intense and very bright colour. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Product Usage: • Objects decorated with Vitrail colours should not be considered for practical usage and are intended for decorative purposes only. Furthermore only surfaces not destined to be put in contact with food should be decorated. • Keep out of reach of children. If swallowed seek prompt medical attention and present the packaging or label.

Quality:

Transparent, intense and very bright colours. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Quality:

Transparent, intense and very bright colours. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Product Usage: • Objects decorated with Vitrail colours should not be considered for practical usage and are intended for decorative purposes only. Furthermore only surfaces not destined to be put in contact with food should be decorated. • Keep out of reach of children. If swallowed seek prompt medical attention and present the packaging or label.

Quality:

Transparent, intense and very bright colour. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Product Usage: • Objects decorated with Vitrail colours should not be considered for practical usage and are intended for decorative purposes only. Furthermore only surfaces not destined to be put in contact with food should be decorated. • Keep out of reach of children. If swallowed seek prompt medical attention and present the packaging or label.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

Quality:

Transparent, intense and very bright colours. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Quality:

Transparent, intense and very bright colours. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Product Usage: • Objects decorated with Vitrail colours should not be considered for practical usage and are intended for decorative purposes only. Furthermore only surfaces not destined to be put in contact with food should be decorated. • Keep out of reach of children. If swallowed seek prompt medical attention and present the packaging or label.