Quality:

Transparent, intense and very bright colours. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Quality:

Transparent, intense and very bright colours. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Properties: QUALITY: Opaque effect, luminous colours. Solvent based, ready to use colours. Brush and sponge application. Good light fastness. COLOUR MIXABILITY: Colours can be mixed together. DRYING: Tack-free in one hour, fully dry in 8 hours. SURFACES: Glass, mirror, polyester, acetate, canvas, metal.THINNER: Odourless mineral spirit or white-spirit. Opacity: Opaque colours. Finish: Brilliant, glass paste effect. CARING (decorated surfaces): After drying, the colour bears a light wash without soaking. NUMBER OF COLOURS: 10 colours. Product Usage: • PEBEO’s Vitrail opaque is applied with a brush or a sponge to all carefully degreased surfaces. • Mix the colours thoroughly with a stick prior to use. • Can be used with Vitrail transparent colours for creating contrasts between transparency and opacity. • Vitrail Opaque colours may also be used with the bowl technique. • Can be used with VITRAIL Cerne Relief outliners. • Objects decorated with Vitrail colours should not be considered for practical usage and are intended for decorative purposes only. Furthermore only surfaces not destined to be put in contact with food should be decorated. • Keep out of reach of children. If swallowed seek prompt medical attention and present the packaging or label.

The Porcelain Painter Range offers shades within a colour system. Basic and fashion colours can be always combined with the corresponding Metallic and Glitter shades.
Whether tastefully colour-matched creations or extravagant colour combinations are desired – everything is possible with the wide colour range from Marabu.
Various kinds of painting techniques can be easily achieved with the painters.

Porcelain Painters are offered in 4 different tip shapes/sizes: from large paint applications with the brush tip, fine painting with the outline & Fineliner tip and decorative writing with the calligraphy tip.
The universal tip with a tip width of 1-2 mm is used as a practical all-rounder: it is ideal for painting and writing.

Note: Despite manufacturer claims, products painted with this pen require baking for the paint to set.

Studio Essentials Clay Modelling Tools are designed for shaping and molding with clay, plasticine, encaustic wax, as well as other soft sculptable material.Available with different wire shapes at each end, these tools are excellent for forming a variety of shapes and patterns. Made with treated wood and stainless steel ferrules, they are durable tools that are great value.Each tool measures approximately 16.5cm in length.

STAEDTLER FIMO Soft is a modelling clay that is ideal for adult beginners and amateur artists. It’s soft and pliable, making it really easy to shape.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

A fine and natural modeling clay. Highly malleable, it is recommended for modelling, sculpture and pottery. Fire in a kiln at 980˚C.

Properties:QUALITY: Opaque and very bright, solvent based colours, ideal for decorating ceramics. Very good lightfastness.COLOUR MIXABILITY: YesDRYING: Oxidation in air. The colours are dry "dust free" in 3 hours at heart after 48 hours.SURFACES: Terracotta, ceramicTHINNER: Odourless mineral spirit or white spiritOpacity: Opaque Finish: BrilliantCARING (decorated supports): After drying, the colours are resistant to scratching and washing in cold water without soaking.BRUSHES: Pébéo Cobra deco or Iris brushesBRUSH CLEANING: Odourless mineral spirit or white spirit.Product Usage:The Ceramic colours are ideal on terracotta and earthenware. To maximize the brightness on porous surfaces it is recommended to apply, prior to painting, a filler undercoat. On rounded surfaces, be careful not to overload to avoid runs. Ceramic colours can be applied with brush, sponge, screen or bath. A sufficiently thick layer of colour can be combined with another material like sand or engraved with a stick. Objects decorated with Ceramic colours are for decorative use only. Always clean brushes thoroughly with white spirit or odourless mineral spirit, then rinse with soapy water.

Properties:QUALITY: Opaque and very bright, solvent based colours, ideal for decorating ceramics. Very good lightfastness.COLOUR MIXABILITY: YesDRYING: Oxidation in air. The colours are dry "dust free" in 3 hours at heart after 48 hours.SURFACES: Terracotta, ceramicTHINNER: Odourless mineral spirit or white spiritOpacity: Opaque Finish: BrilliantCARING (decorated supports): After drying, the colours are resistant to scratching and washing in cold water without soaking.BRUSHES: Pébéo Cobra deco or Iris brushesBRUSH CLEANING: Odourless mineral spirit or white spirit.Product Usage:The Ceramic colours are ideal on terracotta and earthenware. To maximize the brightness on porous surfaces it is recommended to apply, prior to painting, a filler undercoat. On rounded surfaces, be careful not to overload to avoid runs. Ceramic colours can be applied with brush, sponge, screen or bath. A sufficiently thick layer of colour can be combined with another material like sand or engraved with a stick. Objects decorated with Ceramic colours are for decorative use only. Always clean brushes thoroughly with white spirit or odourless mineral spirit, then rinse with soapy water.

Properties:QUALITY: Opaque and very bright, solvent based colours, ideal for decorating ceramics. Very good lightfastness.COLOUR MIXABILITY: YesDRYING: Oxidation in air. The colours are dry "dust free" in 3 hours at heart after 48 hours.SURFACES: Terracotta, ceramicTHINNER: Odourless mineral spirit or white spiritOpacity: Opaque Finish: BrilliantCARING (decorated supports): After drying, the colours are resistant to scratching and washing in cold water without soaking.BRUSHES: Pébéo Cobra deco or Iris brushesBRUSH CLEANING: Odourless mineral spirit or white spirit.Product Usage:The Ceramic colours are ideal on terracotta and earthenware. To maximize the brightness on porous surfaces it is recommended to apply, prior to painting, a filler undercoat. On rounded surfaces, be careful not to overload to avoid runs. Ceramic colours can be applied with brush, sponge, screen or bath. A sufficiently thick layer of colour can be combined with another material like sand or engraved with a stick. Objects decorated with Ceramic colours are for decorative use only. Always clean brushes thoroughly with white spirit or odourless mineral spirit, then rinse with soapy water.

Properties:QUALITY: Opaque and very bright, solvent based colours, ideal for decorating ceramics. Very good lightfastness.COLOUR MIXABILITY: YesDRYING: Oxidation in air. The colours are dry "dust free" in 3 hours at heart after 48 hours.SURFACES: Terracotta, ceramicTHINNER: Odourless mineral spirit or white spiritOpacity: Opaque Finish: BrilliantCARING (decorated supports): After drying, the colours are resistant to scratching and washing in cold water without soaking.BRUSHES: Pébéo Cobra deco or Iris brushesBRUSH CLEANING: Odourless mineral spirit or white spirit.Product Usage:The Ceramic colours are ideal on terracotta and earthenware. To maximize the brightness on porous surfaces it is recommended to apply, prior to painting, a filler undercoat. On rounded surfaces, be careful not to overload to avoid runs. Ceramic colours can be applied with brush, sponge, screen or bath. A sufficiently thick layer of colour can be combined with another material like sand or engraved with a stick. Objects decorated with Ceramic colours are for decorative use only. Always clean brushes thoroughly with white spirit or odourless mineral spirit, then rinse with soapy water.

QUALITY: Water-based paste in 20ml tube with nozzle. Finish: Brilliant. DRYING: 1 hour to the touch, 24 hours to dry completely. CLEANING DECORATED ITEMS: After drying, the dimensional paint may be lightly washed without soaking. Resistant to window cleaners. CLEANING THE BRUSHES: With soap.

Properties:QUALITY: Opaque and very bright, solvent based colours, ideal for decorating ceramics. Very good lightfastness.COLOUR MIXABILITY: YesDRYING: Oxidation in air. The colours are dry "dust free" in 3 hours at heart after 48 hours.SURFACES: Terracotta, ceramicTHINNER: Odourless mineral spirit or white spiritOpacity: Opaque Finish: BrilliantCARING (decorated supports): After drying, the colours are resistant to scratching and washing in cold water without soaking.BRUSHES: Pébéo Cobra deco or Iris brushesBRUSH CLEANING: Odourless mineral spirit or white spirit.Product Usage:The Ceramic colours are ideal on terracotta and earthenware. To maximize the brightness on porous surfaces it is recommended to apply, prior to painting, a filler undercoat. On rounded surfaces, be careful not to overload to avoid runs. Ceramic colours can be applied with brush, sponge, screen or bath. A sufficiently thick layer of colour can be combined with another material like sand or engraved with a stick. Objects decorated with Ceramic colours are for decorative use only. Always clean brushes thoroughly with white spirit or odourless mineral spirit, then rinse with soapy water.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

The Porcelain Painter Range offers shades within a colour system. Basic and fashion colours can be always combined with the corresponding Metallic and Glitter shades.
Whether tastefully colour-matched creations or extravagant colour combinations are desired – everything is possible with the wide colour range from Marabu.
Various kinds of painting techniques can be easily achieved with the painters.

Porcelain Painters are offered in 4 different tip shapes/sizes: from large paint applications with the brush tip, fine painting with the outline & Fineliner tip and decorative writing with the calligraphy tip.
The universal tip with a tip width of 1-2 mm is used as a practical all-rounder: it is ideal for painting and writing.

Note: Despite manufacturer claims, products painted with this pen require baking for the paint to set.

Smooth and soft modelling clay

Easy to blend: Modelling fun for the entire family

Vibrant colours

Ready to use

Standard block divided into 8 segments for easier portioning

56 g, 55 x 55 x 15 mm

Available in 24 colours

Smooth and soft modelling clay

Easy to blend: Modelling fun for the entire family

Vibrant colours

Ready to use

Standard block divided into 8 segments for easier portioning

56 g, 55 x 55 x 15 mm

Available in 24 colours

A natural seaweed based powder. Suitable Alginate for moulding complete items, soft or delicate objects or the human body.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

FIMO soft is particularly smooth and ready to use. Creative ideas can be modelled into shape in no time at all.

Get inspired by the wide range of colours and discover your creativity!

The 24 vibrant colours can transform even the most everyday of objects into unique designer pieces.

Decorative ideas - easy to make:

FIMO soft is

Easy to blend

Ready to use

Available in 24 trendy colours

Properties:QUALITY: Opaque and very bright, solvent based colours, ideal for decorating ceramics. Very good lightfastness.COLOUR MIXABILITY: YesDRYING: Oxidation in air. The colours are dry "dust free" in 3 hours at heart after 48 hours.SURFACES: Terracotta, ceramicTHINNER: Odourless mineral spirit or white spiritOpacity: Opaque Finish: BrilliantCARING (decorated supports): After drying, the colours are resistant to scratching and washing in cold water without soaking.BRUSHES: Pébéo Cobra deco or Iris brushesBRUSH CLEANING: Odourless mineral spirit or white spirit.Product Usage:The Ceramic colours are ideal on terracotta and earthenware. To maximize the brightness on porous surfaces it is recommended to apply, prior to painting, a filler undercoat. On rounded surfaces, be careful not to overload to avoid runs. Ceramic colours can be applied with brush, sponge, screen or bath. A sufficiently thick layer of colour can be combined with another material like sand or engraved with a stick. Objects decorated with Ceramic colours are for decorative use only. Always clean brushes thoroughly with white spirit or odourless mineral spirit, then rinse with soapy water.

Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.