Compatible Part for the PC-T80 Work Bench.

Thermal Flow
Cool air is pulled in through the three left 120mm fans, and warm air is pushed out by the two rear 120mm fan.

Tool-less HDD bay system
DK-Q1 has four HDD bays. Each HDD bay allows for either 2.5″ or 3.5″ drives.
ODD rack can be mounted a 2.5″ HDD and two 2.5″ Drive space on the bottom.

Compatibility
VGA Card length:
390mm

CPU Cooler height:
150mm

PSU length:
260

Radiator length:
240mm

Padded Column
Padded columns are used to increase the height of your desk if it is too low.
Each column is 30mm in height.

Monitor arms & stands support
Opening to monitor arms or stands.It’s size can be adjusted.

Thermal Flow
Cool air is pulled in through the four left 120mm fans, and warm air is pushed out by the four right 120mm fan.

Radiator length:
120mm x 480mm ; 120mm x 360mm ; 120mm x 240mm ; 120mm x 120mm 。

HDD holes:
- Five HDD holes are located on the system tray, each hole can install a 3.5″ or 2.5″ drives.
- Use HDD bracket can hold more drives on a HDD hole.(3.5″ x3 or 2.5″ x4)

Height adjustable legs
Approximately within the range of 0~30mm.

Compatibility
VGA Card length: 280~440mm / PSU length: 140~440mm / CPU Cooler height: 90mm.

A Good Design is to make the life simpler, the Mini-Q PC-Q11 is in minimalism style, it is a combination of art and technolog

A Good Design is to make the life simpler, the Mini-Q PC-Q11 is in minimalism style, it is a combination of art and technolog

Lian Li Fine Craftmanship Product: T1 is a Mini-ITX spider test bench, four lags and M/B tray's angle are all adjustable for hardware display and it absolutely catch people's eyes. To ensure user can put everything together easily, Lian Li designer decided to use only standard PC component inside the T1, 5.25” slim CD-Rom, standard 3.5” hard drives, standard ATX PS/2 power supply units. The parts are easy to get on current market, and it would be easy to upgrade and server in the future. T1 is a Mini-ITX TEST BENCH system, it supports standard Mini-ITX motherboard on the top, therefore install this tiny board can be very easy. The power supply has rubber pads for both insulation and support. reduce vibrations and also secure the PSU without scratching the painted surface. There is a space for slim 5.25” CD-Rom below the motherboard tray. T1 supports one standard 3.5" HDD, simply un-do the screw, ideal for easy HDD installation and services. At the bottom, there is a patented cable management clamp for cables to pass through, allow uesr convenient manage the cables.

New Tool-less HDD Tray System
Hard disk installation is quick and easy.
Supports nine 3.5″ or 2.5″ HDDs.
The HDD trays can be removed to accommodate build preferences, including more room for high-end graphics cards or water cooling radiators.

3.5″/2.5″ drive bays behind the MB tray
3.5″ HDD x1 / 2.5″ HDD x2

Wheels for Easy Maneuverability
Wheels with rubberized grips allows the chassis to be easily moved when fully loaded. A locking mechanism on the rear wheels prevents the chassis moving when set in place.

Maximum Compatibility
VGA Card length: 360mm – 480mm(Max) / PSU length: 200mm / CPU cooler height:180mm / Radiator 240mm or 280mm.

A hinge on the front of the chassis allows for easy access to the internal components.

Two Compartment Design
The PC-V33 features a two compartment design. The top section holds the ATX motherboard, graphics card, while the bottom compartment holds the HDD and the PSU.

Dual HDD tray
A HDD tray with two drive bays,each drive bay allows for either 2.5″ or 3.5″ drives.

Maximum Compatibility
CPU cooler height：190mm / PSU length：300mm / Expansion Card length：330mm

Support Liquid cooling kit and Fan
Radiator (120mm x 120mm or 120mm x 240mm) or 120mm Fan x2 (PC-V33 does not include radiator and fan).

A hinge on the front of the chassis allows for easy access to the internal components.

Two Compartment Design
The PC-V33 features a two compartment design. The top section holds the ATX motherboard, graphics card, while the bottom compartment holds the HDD and the PSU.

Dual HDD tray
A HDD tray with two drive bays,each drive bay allows for either 2.5″ or 3.5″ drives.

Maximum Compatibility
CPU cooler height：190mm / PSU length：300mm / Expansion Card length：330mm

Support Liquid cooling kit and Fan
Radiator (120mm x 120mm or 120mm x 240mm) or 120mm Fan x2 (PC-V33 does not include radiator and fan).

A hinge on the front of the chassis allows for easy access to the internal components.

Two Compartment Design
The PC-V33 features a two compartment design. The top section holds the ATX motherboard, graphics card, while the bottom compartment holds the HDD and the PSU.

Dual HDD tray
A HDD tray with two drive bays,each drive bay allows for either 2.5″ or 3.5″ drives.

Maximum Compatibility
CPU cooler height：190mm / PSU length：300mm / Expansion Card length：330mm

Support Liquid cooling kit and Fan
Radiator (120mm x 120mm or 120mm x 240mm) or 120mm Fan x2 (PC-V33 does not include radiator and fan).