1/2" Female Star Bit Socket Set 9 Pc
Sizes: T20 - T25 - T27 - T30 - T40 - T45 - T50 - T55 - T60
Chrome Vanadium
Steel Box

Telescopic Magnetic Pick Up Tool
Pen design with 635mm extendable telescopic rod.
Ideal for picking up nuts, bolts and screws from inaccessible places.
Pick up tool can support 1kg vertically from the magnetic face when in flush contact with a mild steel surface of equal thickness.
Coated with three layers of nickel, copper and nickel to reduce corrosion and provide a smooth and clean finish.

Fluid Line Clamp Set 4 Piece
This tool is a convenient line clamp set that is essential for mechanics and car
specialists to pinch off fuel, vacuum, transmission, brake lines, heater lines and
other fluid lines safely and easily without damaging the hose.
Sizes: 3/8" - 1/2" - 1" and 1-3/4"

Bulk Pack x 2 U-Part Funnel Plastic Jumbo 250mm

Ring Squeezer Highest Grade Spring Steel
(Piston Ring Compressor with Safety Valve)
Positive Locking Action.
Band takes all rings at once, including skirt rings.
Specially designed for heavy-duty skirt ring pistons.
Compressor is equipped with two tension bands and friction brake
with trigger preventing premature release and ensuring smooth operation.
The two tension bands of the highest grade spring steel eliminate any bottom flare.
Capacity Metric (mm): 90 ~ 175
Capacity Imperial (inch): 3-1/2 ~ 7
Depth Metric (mm): 80
Depth Imperial (inch): 3-1/4

Ring Squeezer Highest Grade Spring Steel
(Piston Ring Compressor with Safety Valve)
Positive Locking Action.
Band takes all rings at once, including skirt rings.
Specially designed for heavy-duty skirt ring pistons.
Compressor is equipped with two tension bands and friction brake
with trigger preventing premature release and ensuring smooth operation.
The two tension bands of the highest grade spring steel eliminate any bottom flare.
Capacity Metric (mm): 90 ~ 175
Capacity Imperial (inch): 3-1/2 ~ 7
Depth Metric (mm): 165
Depth Imperial (inch): 6-1/2

CV Joint Tool With Cutter
Effective tool for installing CV clamps.
The standard banding tool works with the installer's ratchet
and 1/2" socket, or use the provided lever to tension the clamp.
When the boot clamp has been tightened to specs cut the band to
the correct length by flipping the lever forward.

Universal Ball Joint Separator
Universal tool for separation of ball joints.
Jaw opening adjusted in two positions for wider working areas.
Scissor type.
For passenger cars & trucks, for removal of ball pivots on tie rods & stabilisers.
Capacity up to 56mm by reversing the bottom part.
Jaw width (mm): 20
Jaw opening position 1 (mm): 30
Jaw opening position 2 (mm): 50

King Tony Tyre Lever (530mm)

Ring Squeezer Highest Grade Spring Steel
(Piston Ring Compressor with Safety Valve)
Positive Locking Action.
Band takes all rings at once, including skirt rings.
Specially designed for heavy-duty skirt ring pistons.
Compressor is equipped with two tension bands and friction brake
with trigger preventing premature release and ensuring smooth operation.
The two tension bands of the highest grade spring steel eliminate any bottom flare.
Capacity Metric (mm): 57 ~ 125
Capacity Imperial (inch): 2-1/4 ~ 5
Depth Metric (mm): 80
Depth Imperial (inch): 3-1/4

50 - 75 mm Bearing Separator 
For easy removal of bearings & gears.
Edges are beveled for insertion behind bearings.
Made from high grade steel, for maximum strength and durability.

Pitman Arm Puller
Used to Remove Pitman Arm from Shaft
Fits Majority of Cars & Light Trucks
Jaw Opening: 33mm
Pulling Jaw: 64mm
Blister Carded

Body Frame Repair Kit 4 Ton

Constructed of high-grade steel and built to exacting standards for quality and durability.
Lead-free paint finish is applied after a thorough chemical wash to ensure a long-lasting finish and to help prevent rust.
Paint is oil, grease and dirt-resistant for easy cleanup.
Pump has an automatic overload system to help prevent damage to rams and equipment.
Product Information
Portable Power Kits are designed to be used for pushing, spreading, and pressing
of vehicle body panels as well as various component parts and assemblies.

Capacity (Ton): 4
Min. Ram Height (mm): 330
Ram Lifting Height (mm): 120
Package Size (mm): 590 x 370 x 195
G.W (kg): 20
N.W (kg): 17

TOYOTA Oil Filter Cup
6 Specially Designed Notches to Engage Ears on Caps for Maximum Torque.
Guide Arrows are Embedded in Tool for Fast Alignment of Notches to Ears.
It is Built with a Single Piece die Cast Aluminium Construction for Strength.
Size: 64.5mm - Number of flutes 14 - Drive - 3/8" (10mm)
Applicable:
Most of 4 Cylinder (1800CC - 2000CC)
Special designed for plastic oil filter cap of

Fits & Vehicles with 4 Cylinders & some 6 : 2009~2015 Corolla /
2009~2015 Matrix / 2007~2015 Prius / 2010~2015 Rav4 / 2008~2015 Lexus CT200h /
2008~2015 Scion XD 1.8L / 2005~2015 Scion TC /  1990-2015 Camry 4 cyl, V6 (2007-2008)
/ Avalon (2005-2008) / Highlander 4 cyl (2001-2008) V6 (2008) / Tundra (2007-2008) /
Sienna (2007-2014)

King Tony Steel Line Stopper Set

Timing Tool Kit BMW N43

BMW N43 Timing Locking Setting Tool Kit, Engines 1.6 / 2.0, N43 Chain Drive Petrol Engine, Vanos Sensor Alignment
BMW Petrol Engine Timing Setting Locking Tool

Petrol Engine codes: N43 B16A/AA . N43 B20A . N43 B20AA . N43 B20AY . N43 B20KO . N43 B20U0

Fits Following Models:-
BMW: 1, 3, 5 (Engine type series E60-E61-E81-E82-E87-E88-E90-E91-E92-E93)
1 Series E81 . E82 . E87 . E88 ( 06 -12 )
3 Series E90 . E91 . E92 . E93 ( 06 -12 )
5 Series E60 . E61 ( 07-10 )

Kaufmann 3 Metre Chain Hoist - 2000kg

76mm diameter lens electro-plated metal flange.

Universal Valve Spring Compressor 35- 200mm
For multi-valve petrol and diesel engines, specially designed for difficult
access and deep-seated multi-valve cylinder heads.
Large throat clearance for larger engines
Collet Adaptors (mm): 25 & 30
Jaw Opening (mm): 35 ~ 200
Throat Clearance (mm): 250

Universal Valve Spring Compressor 55 – 175mm
Suitable for use on multi-valve petrol and diesel engines with deep-seated valves.
Suitable also for general use on OHC, OHV and CVH engines.
Reversible jaw and adaptor.
Twin cam action permits use from above or below valve.
Jaw Opening (mm): 55 ~ 175
Throat Clearance (mm): 165

2 Way Wheel Rim Wrenches
Chrome vanadium
Heavy duty for use on light and heavy motor vehicles
Tommy bar included
Size (mm): 27 x 32
Length (mm): 396
Weight (g): 3500

Oxygen Sensor Socket Set 7 Piece (O2 Sensor Oil Pressure Sending Unit)
For removal or replacement of heated and non-heated oxygen sensors.
Cut-away sections for use in tight spaces.
Includes:
1/2" x 27mm injector socket,
3/8" x 7/8" vacuum switch socket,
2 piece oxygen sensor sockets (1/2" x 29mm and 3/8" x 7/8"),
3/8" x 7/8" offset oxygen sensor wrench,
3/8" x 1-1/16" oil sensor unit socket,
1/2" x 22mm heated oxygen sensor socket.

Ball Joint Separator
Forged steel body with steel bolt.
Designed to speed up removal of ball-pins on steering and suspension systems.
Jaw width (mm): 19
Jaw opening (mm): 38

King Tony 3 In 1 Flexiable Bar And Inspection Mirror