DUX104GPS-2F-IS - 6-port Gigabit managed industrial PoE switch

• 4 Gigabit PoE+ ports and 2 Gigabit SFP ports
• Support IEEE802.3af/at, single port output maximum power 46W
• L2 Managed
• RUN-Ring technology Ring network
• 48-56V DC redundant dual supply voltage input, DIN Rail Support
• Support reverse connection protection, over current protection
• IP40 level protection
• Operating temperature:-40~ 75°C
• 4 AI Modes

• Support 4 additional modes, AI VLAN, AI Extend, AI PoE and AI QoS
• AI Extend: support 250 Meters distance power supply (recommended Cat5e or 6 network cable) @ 10Mbps.
• AI VLAN: Isolating ports 1-8 . Each port effectively suppress network storms and improve network performance.
• AI QoS: Prioritize identified video data to make video transmission smoother.
• AI POE: Automatically detect the power receiving port, find the dead device, power off and restart the device

Duxbury 8-port Gigabit PoE+ Unmanaged Switch with 2x Gigabit SFP/Uplink Combo ports DUX1012P

The Duxbury 8-port Gigabit PoE+ Unmanaged Switch with 2x Gigabit SFP/Uplink Combo ports DUX1012P is a powerful and versatile networking device designed for small to medium-sized businesses. This switch offers reliable and efficient connectivity for multiple devices in your network, such as IP cameras, access points, and VoIP phones.

With eight Gigabit PoE+ ports and two Gigabit SFP/Uplink Combo ports, this switch enables you to connect up to eight PoE-enabled devices and two non-PoE devices simultaneously.

The Duxbury DUX1012P is an unmanaged switch, which means that it is easy to install and requires no configuration. The switch also features plug-and-play functionality, which means that you can start using it right out of the box without any additional setup.

In addition to its performance and ease of use, the DUX1012P also features a compact design that is perfect for small offices or home networks. It is built to last, with a sturdy metal housing that protects the switch from accidental damage.

Overall, the Duxbury 8-port Gigabit PoE+ Unmanaged Switch with 2x Gigabit SFP/Uplink Combo ports DUX1012P is an ideal networking device for small to medium-sized businesses that need reliable and efficient connectivity for multiple devices. Its PoE+ capabilities and plug-and-play functionality make it a versatile and cost-effective solution for powering and connecting your network devices.

Technical Specifications
Product: Duxbury 8-port Gigabit PoE+ Switch with 2x Gigabit SFP/Uplink Combo ports
Switch Type: Unmanaged Desktop Switch
Interfaces: 8-port PoE+ Gigabit, 2-port Gigabit SFP, 2-port Gigabit (Combo) Uplink
Total PoE budget: 120W
PoE Digital Display: Yes
AI Mode support 4 additional modes:

• AI VLAN
• AI Extend
• AI PoE

Smart. Secure. Easy. Install Anywhere with Long Battery Life Smart Wire-Free Security Camera System 180-Day Long Battery Life The rechargeable and removable battery with low power protocol can largely extend your usage time. *Battery life of up to 180 days is based on TP-Link’s laboratory testing triggering 10-20 events per day. Actual battery life may vary based on device settings, use, and environmental factors. 2K QHD Crystal Clear View Now with 1.7 times more pixels than 1080p, providing clearer videos and more crisp photos. Smart AI Detection and Notification Smart AI identifies people, pets, and vehicles, notifying users as needed. Sound and Light Alarm Trigger the sound and light alarm to frighten away the unwanted visitors. Set the Camera On the Table Set your camera anywhere(Indoor / Outdoor) you want. Two-Way Audio Communicate directly with the outdoors. Customizable Activity Zone See what matters most to you. Secure Local Storage Save recorded videos on the hub-installed microSD card (Up to 256GB) or using Tapo Care cloud storage service. Cloud Storage Tapo Care supported. Enjoy your cloud storage with unlimited spaces. Water & Dust Resistant - IP65 Resistant to outdoor weather-related factors.

What This Product Does The TP-Link 16-Port 10/100/1000Mbps Desktop Switch provides you an easy way to make the transition to Gigabit Ethernet. Increase the speed of your network server and backbone connections, or make Gigabit to the desktop a reality. Plug and Play design, with no configuration required, makes the product easy to use. Moreover, TL-SG116 adopts lower power consumption design. With the innovative energy-efficient technology, the TL-SG116 can save power consumption, making it an eco-friendly solution for your home or office network. Gigabit Switch Featured with 16 10/100/1000Mbps ports, TL-SG116 greatly expands your network capacity, enabling instant large files transferring. So, power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly. Go Green With Your Ethernet You now have the choice to go green when upgrading to a gigabit network! This new generation TL-SG116 16-Port 10/100/1000Mbps Desktop Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network. Traffic Optimization 802.1p and DSCP QoS enable smooth latency-sensitive traffic such as voice and video, and IGMP Snooping optimizes the Multicast data stream. Easy to use The auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminate the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance. Moreover, fanless design ensures quiet operation.

What This Product Does
The TL-SF1005D 5-Port 10/100Mbps desktop switch provides an easy way to expand your wired network. All 5 ports support auto-MDI/MDIX, eliminating the need to worry about the type of cable to use. Featuring full duplex mode, the TL-SF1005D can process data at a rate of up to 200Mbps making it an ideal choice for expanding your high performance wired network. Moreover, with innovative energy-efficient technology, the TL-SF1005D can save up to 60% of power consumption, making it an eco-friendly solution for your home or office network.

High Performance
TL-SF1005D Fast Ethernet Switch provides 5 10/100Mbps Auto-Negotiation RJ45 ports. All ports support Auto MDI/MDIX function, eliminating the need for crossover cables or Uplink ports..Featuring non-blocking switching architecture,TL-SF1005D forwards and filters packets at full wire-speed for maximum throughput. With 10K Jumbo frame, the performance of large files transfers is improved significantly. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make TL-SF1005D work reliably.

Easy to Use
The auto features of this ethernet switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100 Mbps) and intelligently adjusts for compatibility and optimal performance.

or professionals who need fundamental wire identification tools without the extra cost, the 3PK-NT023N basic Tone and Probe Kit is the answer. Use it on de-energized AC wire, telephone/twisted pair wire, all voice and data category rated cable, speaker wire, virtually any cable or wire!

What This Product Does 8-Port Gigabit Desktop Switch with 4-Port PoE provides the seamless network connection. It integrates 1000Mbps Gigabit Ethernet and 10/100Mbps Fast Ethernet network capabilities. How This Product Works 4 of the 8 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc. Overload Arrangement TL-SG1008P has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 53W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port. Port Priority Function Priority (port-1>port-2>port-3>port-4): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2 and 4 are using 15.4w (maximum power per port is 15.4W), the system power is 46.2w in total (PoE max LED is red ). If there is an additional PD inserted to Port 3 with 10w then the system will cut off Port 4 to protect the system, this means Port 1, 2 will use 15.4w, and Port3 will use 10w, and no power will be supplied to Port 4. Easy To Use TL-SG1008P is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance and quality, the TP-LINK TL-SG1008P 8-Port Gigabit Desktop Switch with 4-Port PoE is a great selection for expanding your home or office network.

1000BASE-T RJ45 SFP Module Extend your copper connection by up to 100 meters Gigabit Port for a High-Speed Connection Transmit data seamlessly up to 100 meters between your SFP interface and the copper gigabit port. Plug and Play A plug-and-play design makes for easy deployment, no technician needed. Durable Metal Casing High-quality metal casing ensures strength and reliability for a long time, maintaining a stable connection in a wide range of environments. Ensured Compatibility TL-SM331T is compatible with various optic fiber equipment from different vendors, such as TP-Link, Cisco, Huawei, Ubiquiti, D-link, Netgear and Mikrotik.

System Overview DH-PFS3110-8ET-96 is an unmanaged Hardened PoE Switch with 8 × 10/100Mbps PoE Ports. It provides 8 × 10/100 Mbps Ethernet ports , 1 × 1000M SFPand 1× 10/100/1000 Mbps uplink ports. The product is equipped with two types of transmission modes (Extend Mode On/ Extend Mode Off). The red port supports the IEEE802.3bt and the Hi-PoE standards. The maximum power consumption is 90W. It also supports PoE watchdog to avoid manually maintenance and device restart, which can realize the intelligent management and reduce the cost. Functions Intelligent PoE Provides control over power consumption and offers real-time monitoring to ensure power supplies receive priority with important ports and to prevent malfunctions caused by changes in power consumption. Supports ultra wide power supplies and is able to adapt to IPC power fluctuations. BT 90W The red ports support IEEE802.3af, IEEE802.3at, IEEE802.3bt and Hi-PoE standards, with a maximum output power consumption rate of 90W per port. Suitable for powering high-power devices. PoE Watchdog Adopts the innovative PoE Watchdog. PoE Watchdog can be switched on by dialing or turning on the WEB page switch. It enables the switch to automatically detect port status and restart failed ports to recover connection in case of IPC connection exception. This enables intelligent operation and maintenance management in its truest sense, effectively reducing manual maintenance costs. Long Distance PoE By dialing or enabling long-range transmission on the WEB interface, the transmission distance of a PoE port can be up to 250 m, meeting the requirements of wired transmission (bandwidth reduced to 10 Mbps). 8-pin Assignment PoE Power Supply Supports 8-pin simultaneous power supply (1/2/4/5 positive, 3/6/7/8 negative). Signal lines and idle lines supply power at the same time. Compatibility with IPC is enhanced. Cable loss is reduced. Loading capacity is increased. Scene The device is applicable for use in different scenarios, including home, office, server farm, and small mall.

The TL-SG1016 Gigabit Ethernet Switch provides you with a high-performance, low-cost, easy-to-use, seamless and standard upgrade to improve old network to 1000Mbps network. All 16 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SG1016 can save up to 15% of the power consumption and 80% of the packaging material can be recycled, making it an eco-friendly solution for your business network.

TP-LINK Green Technology
This new generation TL-SG1016 Gigabit Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status to limit the carbon footprint of your network. It also complies with the EU’S RoHS, prohibiting the use of certain hazardous materials. Besides, 80% of the packaging material can be recycled.

High Performance
All 16 ports are Gigabit RJ-45 ports which can provide large file transferring and also be compatible with 10Mbps and 100Mbps Ethernet devices. Featuring non-blocking switching architecture, TL-SG1016 forwards and filters packets at full wire-speed for maximum throughput. With 10KB Jumbo frame, the performance of large files transfers is improved significantly. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the tra­ffic congestion and make The TL-SG1016 work reliably. It’s a perfect choice to update your network to Gigabit while protecting your previous investment properly.

Easy to Use
The auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal performance.

300Mbps Wireless N Speed – Extend Wireless Coverage
With wireless speeds of up to 300Mbps and advanced MIMO technology, the TL-WN823N provides you with a fast, reliable wireless connection for lag-free online gaming and video streaming. Better still, TL-WN823N achieves the best performance with wireless N devices, but also works seamlessly with existing IEEE 802.11b/g networks.

What This Product Does
TP-LINK's 300Mbps Mini Wireless N USB Adapter TL-WN823N is designed to connect your laptop or desktop to a wireless network and enjoy high speed wireless performance. The fingertip design makes the adapter convenient and easy to carry around. What’s more, the TL-WN823N features SoftAP Mode, one-button security setup, easy-to-use configuration software, making it a great choice for enjoying fast wireless network.

PoE15F can realize the synchronous transmission of network data and power through an Ethernet cable (Cat.5 or better). The output power of each port is as high as 15W, which can be exported as PoE equipment (via RJ45 port)

Delivers power and data through one Ethernet cable for easy network extension
Compatible with IEEE 802.3af compliant powered devices
PoE Port Delivers power up to 100 meters
Plug and Play, no configuration required

What It Does PoE30G-AT PoE Injector delivers up to 30W output power per port. By using this device, both data and electrical power can be simultaneously delivered through a single CAT5 (or better) Ethernet cable to a non-PoE Ethernet-enabled device, eliminating the trouble to connect it to an outlet nearby with an external power cord. You can connect it to a wireless AP, Web cam (IP Camera), IP telephone, or other devices for the purpose of reducing installation cost and improving your network performance. PoE Feature: - Support IEEE802.3af, IEEE802.3at standard; - Auto-detects and provide power supply to PD equipment which compliant with IEEE802.3af at standard; - Power consumption one port up to 30W. Interface Features: - Compliant with IEEE802.3,IEEE802.3u,IEEE802.3ab,IEEE802.3af,IEEE802.3at Ethernet standard; - 2 RJ-45 Gigabit ports support 10/100/1000Mbps connecting rate; - Date&Power Out port support PoE. Product Features: - Integrated design and easy installation; - Plug and play, no need to setup; - GE transmission rate for wide use. Fireproofing Features: - Fireproofing level of case up to 94V0.

Having trouble getting a solid, reliable WiFi signal in some parts of your home? A WiFi extender is the solution for you.

The Mtech wifi extender is used to extend the coverage area of your WiFi network. It works by receiving your existing WiFi signal, amplifying it and then transmitting the boosted signal. With a WiFi extender you can effectively double the coverage area of your WiFi network - reaching far corners of your home or office, different floors, or even extend coverage to your yard.

5-Port Switch Gigabit Unmanaged PoE switch with 4 PoE+ ports and 63W power budget to power Wireless AP, IP Cameras, IP Phones and more

What This Product Does
The TP-Link 8-Port Gigabit desktop switch TL-SG1008D provides you an easy way to make the transition to Gigabit Ethernet. Increase the speed of your network server and backbone connections, or make Gigabit to the desktop a reality. Moreover, TL-SG1008D adopts lower power consumption design. With the innovative energy-efficient technology, the TL-SG1008D can save up to 80%* of the power consumption, making it an eco-friendly solution for your home or office network.

Gigabit Switch
Featured with 8 10/100/1000Mbps ports, TL-SG1008D greatly expands your network capacity, enabling instant large files transferring. So，power users in the home, office, workgroup, or creative production environment can now move large, bandwidth-intensive files faster. Transfer graphics, CGI, CAD, or multimedia files across the network instantly.

Go Green With Your Ethernet
You now have the choice to go green when upgrading to a gigabit network! This new generation TL-SG1008D 8-Port Gigabit Desktop Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network.

Power down Idle Ports
When a computer or network equipment is off, the corresponding port of a traditional switch will continue to consume considerable amounts of power. The TL-SG1008D can automatically detect the link status of each port and reduce the power consumption of ports that are idle, resulting in up to an 80% reduction in power use.

Power Budget According to Cable Length
Ideally, shorter cable would use less power because of less power degradation over their length; this is not the case with most devices as they will use the same amount of power across the cable regardless of the length.

Easy to Use
The auto features of this gigabit switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminate the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (either 10, 100, or 1000 Mbps) and intelligently adjusts for compatibility and optimal Performance.

JetStream 52-Port Gigabit L2+ Managed Switch with 48-Port PoE+

No Configuration Needed Simply Plug and Play! With an integrated 4G LTE modem and a built-in SIM card slot, all you need to do is insert a SIM card and turn on the TL-MR6400. Enjoying fast, stable Wi-Fi on a 4G LTE network has never been easier. Share Your 4G LTE Network Take full of advantage of your cutting-edge 4G LTE network, which can achieve download speeds of up to 150 Mbps. The TL-MR6400 shares your 4G LTE network with multiple Wi-Fi devices, so you can enjoy uninterrupted HD movies, rapid file downloads, and smooth video chats. It is also fully compatible with FDD-LTE and TDD-LTE, which are supported by most operators around the world. Wi-Fi Where You Need It The TL-MR6400 offers unmatched convenience and versatility. Whether you’ re at hom or working in a remote location, the TL-MR6400 is the perfect solution. Just plug it in to boost on-site productivity and stay connected in a diverse range of environments. From the exhibition center to the RV, the TL-MR6400 always has you covered. Internet Access for up to 32 Devices simultaneously The TL-MR6400 can easily share a 3G/4G connection with up to 32 wireless devices, such as tablets, laptops and mobile phones at the same time. The LAN ports are also ready to provide internet for wired devices like desktop computers. Easy Management Set up the TL-MR6400 in minutes thanks to its intuitive web interface and the powerful Tether app. Manage network settings from any Android or iOS device. Control your home network anytime and anywhere.