The Porcelain Painter Range offers shades within a colour system. Basic and fashion colours can be always combined with the corresponding Metallic and Glitter shades. Whether tastefully colour-matched creations or extravagant colour combinations are desired – everything is possible with the wide colour range from Marabu. Various kinds of painting techniques can be easily achieved with the painters.Porcelain Painters are offered in 4 different tip shapes/sizes: from large paint applications with the brush tip, fine painting with the outline & Fineliner tip and decorative writing with the calligraphy tip. The universal tip with a tip width of 1-2 mm is used as a practical all-rounder: it is ideal for painting and writing.

Paint, allow to dry (3 days), then it's finished

Dishwasher-safe without oven fixing (maximum 50°C)

Paint tips: calligraphy, brush, Fineliner and universal tip

Water based, odourless, lightfast. For children from 6 years on

Application:Clean the crockery with a scouring agent and a small sponge before painting. Afterwards it should be wiped with Marabu-Cleaner or White Spirit so that it is dust and grease-free. Before use, shake the painters well with the cap closed. Press onto the tip repeatedly until the ink is visible in it (do not continue once the ink appears in the tip as this may overload it). Try using the painter on a piece of scrap paper first (not on the object to be painted until you are sure the flow is smooth). Draw free-hand outlines with the outline painter or copy the motif using carbon paper. For this, put the tracing paper on the paper design of the motif, fix with masking tape on the crockery and go over the motif using a pencil while putting sufficient pressure on it to trace the drawing. Allow the outlines to dry briefly, then paint the motif with the chosen colours. Decorate the design with letters (e.g. name) just as you like. Allow the painted porcelain to dry for 3 days. Now everything is dishwashersafe at a maximum 50°C. After use, close the cap well (until it clicks). Store in a horizontal position.

Quality:

Transparent, intense and very bright colours. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

These colours offer excellent permanency and lightfastness. There are no fillers, extenders, opacifiers, toners, or dyes added, and they have an exceptionally smooth, thick buttery consistency.

Pigment Classification: Inorganic Chemical Description: Natural Mica Flakes Opacity/Transparency: N/A Lightfastness Rating: N/A Permanency: Exc Colour index name: - Colour index number: - Munsell Notation Listing: Hue N/A Value N/A Chroma N/A

Viscosity Range: 5000-6000 CPS Gloss Average: N/A CIE L*a*b* Values: L* a* b* Tint Strength: N/A

These durable and attractive brushes are perfect for hobby or school painting, and offer surprising value for money. • Excellent colour absorbing capacity • Very elastic grey synthetic fibres • Seamless aluminium ferrules • Green matt handles

These durable and attractive brushes are perfect for hobby or school painting, and offer surprising value for money. • Excellent colour absorbing capacity • Very elastic grey synthetic fibres • Seamless aluminium ferrules • Green matt handles

These durable and attractive brushes are perfect for hobby or school painting, and offer surprising value for money. • Excellent colour absorbing capacity • Very elastic grey synthetic fibres • Seamless aluminium ferrules • Green matt handles

Eli-Glow Photoluminescent Pigments will release light for up to 8 hours in darkness and 'charge up' after only 30 minutes exposure to daylight. By day the powder crystals absorb UV light and after dark they release energy in the form of a long-lasting ambient glow. The technology behind the Eli-Glow pigments shows no sign of any reduction in the ability to rejuvenate daily. The long-lasting glow offers functional and decorative solutions, ranging from workplace and road safety to visual applications, art, sculpture and interior/exterior design. Eli-Glow is harmless, non-toxic, non-radioactive and non-hazardous.

The pigments will recharge themselves an infinite number of times and will last indefinitely. The pigments absorb radiant U.V energy from sunlight (or indoor lighting) and convert it into longer wavelengths in the visible spectrum, thereby emitting it as light with the sensation of colours. By day the pigment is a pale straw-coloured substance. When mixed in a ratio of 10-20% with a binder it becomes invisible and will not affect the optical clarity of your coating.

How do I use Eli-Glow Pigment Powder?

Mix the powder into any non-waterbased binder (Eli Glow TotalCast Resin., PVA glues, clear varnishes, acrylic paints, oil paints, enamel paints, solvent-based paints, concrete sealers, inks etc.)

The binder needs to be clear/transparent or light in colour so as to allow the passage of U.V light to activate the Eli-Glow crystals.

Mix 10-20% powder into your binder to achieve a general glow colour across the finished article. Alternatively the powder can be sprinkled/scattered in some areas to highlight in a line, spot or even trace a curved section.

Eli-Glow Photoluminescent Pigments will release light for up to 8 hours in darkness and 'charge up' after only 30 minutes exposure to daylight. By day the powder crystals absorb UV light and after dark they release energy in the form of a long-lasting ambient glow. The technology behind the Eli-Glow pigments shows no sign of any reduction in the ability to rejuvenate daily. The long-lasting glow offers functional and decorative solutions, ranging from workplace and road safety to visual applications, art, sculpture and interior/exterior design. Eli-Glow is harmless, non-toxic, non-radioactive and non-hazardous.

The pigments will recharge themselves an infinite number of times and will last indefinitely. The pigments absorb radiant U.V energy from sunlight (or indoor lighting) and convert it into longer wavelengths in the visible spectrum, thereby emitting it as light with the sensation of colours. By day the pigment is a pale straw-coloured substance. When mixed in a ratio of 10-20% with a binder it becomes invisible and will not affect the optical clarity of your coating.

How do I use Eli-Glow Pigment Powder?

Mix the powder into any non-waterbased binder (Eli Glow TotalCast Resin., PVA glues, clear varnishes, acrylic paints, oil paints, enamel paints, solvent-based paints, concrete sealers, inks etc.)

The binder needs to be clear/transparent or light in colour so as to allow the passage of U.V light to activate the Eli-Glow crystals.

Mix 10-20% powder into your binder to achieve a general glow colour across the finished article. Alternatively the powder can be sprinkled/scattered in some areas to highlight in a line, spot or even trace a curved section.

This Painting On Glass Discovery Set contains:

6 x 20ml Assorted Vitrail Colours (crimson, lemon, orange, chartreuse green, sky blue and gold).

Product Usage: • PEBEO’s Vitrail opaque is applied with a brush or a sponge to all carefully degreased surfaces. • Mix the colours thoroughly with a stick prior to use. • Can be used with Vitrail transparent colours for creating contrasts between transparency and opacity. • Vitrail Opaque colours may also be used with the bowl technique. • Can be used with VITRAIL Cerne Relief outliners. • Objects decorated with Vitrail colours should not be considered for practical usage and are intended for decorative purposes only. Furthermore only surfaces not destined to be put in contact with food should be decorated. • Keep out of reach of children. If swallowed seek prompt medical attention and present the packaging or label.

Quality:

Transparent, intense and very bright colour. Solvent based, ready to use. Good lightfastness. Use with the cerne relief.

Colour mixability:

Colours can be mixed together.

Drying:

Tack-free in one hour, fully dry in 8 hours if led in thin coats.

Surfaces:

Glass, polyester, acetate ..

Thinner:

Odourless mineral spirit or white spirit.

Opacity:

Transparent and opaque colours

Finish:

Brilliant.

Pébéo's Vitrail is applied with a brush to all carefully degreased transparent surfaces : glass, acetate, polyester, plexiglas.

Product Usage: • Objects decorated with Vitrail colours should not be considered for practical usage and are intended for decorative purposes only. Furthermore only surfaces not destined to be put in contact with food should be decorated. • Keep out of reach of children. If swallowed seek prompt medical attention and present the packaging or label.

The Montana Acrylic Marker Fine is a high quality water based paint marker available in 24 vibrant colours that match to corresponding colours in the Montana Gold spray paint series. The highly pigmented paint is light-fast, high covering, water proof and abrasion proof allowing application to almost any surface. The optimum flow control pump-valve system allows accurate handling and application. The transparent marker bodies allow for easy assesment of remaining marker content. Replacement tips are seperately available. The solvent free Acrylic Marker range is ACMI approved and carries the AP mark of non-toxicity. Use on almost any surface. Ideal for interior use - for exterior use, please use Montana Gold Varnish for sealing.

* Color matching: Due to a different paint base between Acrylic markers (water-based) and Montana GOLD spray paint (solvent-based), for best colour matching results apply a coat of Montana Gold 400ml Gloss Varnish for one even finish. Slight differences may appear due to used substrate or ground. 100% colour match is not guaranteed. Always test before use.

The Montana Acrylic Marker Fine is a high quality water based paint marker available in 24 vibrant colours that match to corresponding colours in the Montana Gold spray paint series. The highly pigmented paint is light-fast, high covering, water proof and abrasion proof allowing application to almost any surface. The optimum flow control pump-valve system allows accurate handling and application. The transparent marker bodies allow for easy assesment of remaining marker content. Replacement tips are seperately available. The solvent free Acrylic Marker range is ACMI approved and carries the AP mark of non-toxicity. Use on almost any surface. Ideal for interior use - for exterior use, please use Montana Gold Varnish for sealing.

* Color matching: Due to a different paint base between Acrylic markers (water-based) and Montana GOLD spray paint (solvent-based), for best colour matching results apply a coat of Montana Gold 400ml Gloss Varnish for one even finish. Slight differences may appear due to used substrate or ground. 100% colour match is not guaranteed. Always test before use.

Roberson Liquid Metals have a rich deep colour and are ideal for a range of applications and surfaces. All colours are intermixable and can be used on surfaces such as plaster, wood, paper & canvas. The paint gives the appearance of metal but will not tarnish and is not required to be varnished.

Roberson Liquid Metals are creamy acrylic colours that can be used on most surfaces including plaster, wood, paper & canvas. The rich, deep colour gives the appearance of metal but it will not tarnish and is not required to be varnished.

The 24 colour range includes 13 shades of gold, brass and bronze; eight shades of silver, pewter and platinum; a steel, a graphite and an interference, glittery colour (called Twinkle).
All colours are intermixable with each other and other acrylic paints. When mixed they add both their colour and their sparkle to other acrylic paints.

The colours are all transparent but in thicker applications they can cover quite well. The paints can be thinned with water and as the paint becomes more transparent the metallic shimmer is still visible. Clean up is with soap and water. If you intend to paint large things, the pots list the paint’s coverage as: 7 square metres per litre

Speciality Colours
Two of the 24 colour range are slightly different to the rest and have slightly different prices:

Twinkle: This variation of liquid metals produces colour changing effects with a hint of glitter. The use of different backgrounds will change the effects, for example dark backgrounds will show the glitter properties whereas light backgrounds provide a colour changing effect dependant on angle of view. It can be added to other colours to create a range of interesting effects.

Solid Silver: This variation of Liquid Metals differs from other silver shades within the range as it contains aluminium particles – this makes the liquid metal more opaque to provide excellent coverage.

Similar to the white stencil brushes but the black bristle is slightly coarser. A wide range of sizes for the stenciller.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

The Porcelain Painter Range offers shades within a colour system. Basic and fashion colours can be always combined with the corresponding Metallic and Glitter shades.
Whether tastefully colour-matched creations or extravagant colour combinations are desired – everything is possible with the wide colour range from Marabu.
Various kinds of painting techniques can be easily achieved with the painters.

Porcelain Painters are offered in 4 different tip shapes/sizes: from large paint applications with the brush tip, fine painting with the outline & Fineliner tip and decorative writing with the calligraphy tip.
The universal tip with a tip width of 1-2 mm is used as a practical all-rounder: it is ideal for painting and writing.

Note: Despite manufacturer claims, products painted with this pen require baking for the paint to set.

Handover series 61 represents an economical alternative to the larger series 610 badger hair softeners and are ideal for softening or blending on small areas and panels.

Round badger brushes with a domed head which are ideal for blending or softening smaller areas such as picture frames.

Similar to the black stencil brushes but the white bristle is slightly less coarse. A wide range of sizes for the stenciller.

These durable and attractive brushes are perfect for hobby or school painting, and offer surprising value for money. • Excellent colour absorbing capacity • Very elastic grey synthetic fibres • Seamless aluminium ferrules • Green matt handles

QUALITY: Water based Gutta, pearly and opaque is used to draw outlines in silk painting. MIXABILITY OF COLOURS: No.DRYING: Air dry in 30 minutes. SURFACES: All kinds of silk. DILUTION: Useless. Opacity: Opaque. Finish: Pearly. FIXING: 3-4 minutes on the back side of the fabric with a hot iron. CARE (Surfaces decorated) : 48 hours after fixing, the gutta is resistant to hand washing with water and dry cleaning. Water-based Gutta:Water-based Guttas have a thick consistency and are ideal for drawing outlines. Pearlescent, they can be applied directly from the nozzle tube. They penetrate perfectly through the fibres of the fabric, thus creating a barrier to the Setasilk colours which are applied afterwards. Once they are set with an iron, these Guttas are wash resistant.

The Montana Acrylic Marker Fine is a high quality water based paint marker available in 24 vibrant colours that match to corresponding colours in the Montana Gold spray paint series. The highly pigmented paint is light-fast, high covering, water proof and abrasion proof allowing application to almost any surface. The optimum flow control pump-valve system allows accurate handling and application. The transparent marker bodies allow for easy assesment of remaining marker content. Replacement tips are seperately available. The solvent free Acrylic Marker range is ACMI approved and carries the AP mark of non-toxicity. Use on almost any surface. Ideal for interior use - for exterior use, please use Montana Gold Varnish for sealing.

* Color matching: Due to a different paint base between Acrylic markers (water-based) and Montana GOLD spray paint (solvent-based), for best colour matching results apply a coat of Montana Gold 400ml Gloss Varnish for one even finish. Slight differences may appear due to used substrate or ground. 100% colour match is not guaranteed. Always test before use.

Properties :QUALITY: Deep and glossy, transparent or opaque, with a superb enamelled appearance after baking. The range includes 10 shimmering colours, twinkling and iridescent effects, particularly opaque and covering. Excellent lightfastness.COLOUR MIXABILITY: Colours can be mixed together.DRYING: Tack free in a few minutes, fully dry in a minimum of 24 hours. Baking all colours and auxiliary products in the range : 35 minutes at 150°C (300°F) in domestic oven, after minimum 24 hours drying. For the markers: Allow to air dry 72 hours for decorative use with light washing and no soaking.Product Usage :Porcelaine 150 can be applied to all heat-stable bases that are able to withstand a temperature of 150°C (300°F), such as porcelain, china, glazed earthenware, terracotta, metal, enameled sheet steel, copper and glass. The choice of base enables numerous effects to be produced and experiments to be made with the transparency and intensity of the colours. Porcelaine 150 makes professional enameling available to all, with a new generation of 46 colours, glazed by simply baking at 150°C (300°F) in any domestic oven. In bottle, tube and marker, which can be mixed together, deep and glossy, transparent or opaque, with a superb enameled appearance after baking. Many applications are possible with Porcelaine 150: with brushes and also with sponge and stencil. The Porcelaine 150 outliners, in tube with nozzle, can be used for outlining work and screen printing. The markers are recommended for lines and writing. Shake well before use. Press tip repeatedly to start ink flow. Allow to air dry 72 hours for decorative use with light washing and no soaking. For dishwasher resistance, allow to air dry 24 hour after application then bake in oven for 35 minutes at 150°C (300°F). Store flatwise. Keep away from freezing.

Handover’s natural sea sponges measure 5 inches across for the “medium” up to 7 inches across for the extra large. They are perfect for the sponging effects achieved by specialist decorators.