Bostik Clear is a strong, fast drying, multi-purpose adhesive designed to give good adhesion to a wide variety of household materials. Exhibits excellent adhesion to many materials such as paper, cardboard, leather, ceramics, glass, wood, fabrics, rubber, felt, metal, and some plastics like rigid PVC and Perspex. This fast drying general purpose glue is a must have for home, school and office work, where it can be used for art and crafts, scrapbooking, photo albums, school projects, handicraft and decorative work, greeting cards, invitations, paper decorations and general DIY tasks where quick repairs are required. It is acid free and will not yellow or damage paper.

Not be used on painted or polished surfaces. Not suitable for use on some plastics like polyethylene, polypropylene, polystyrene plastics, rayon and acetate fabrics. Should not be used for the repair of pottery handles or any items that may contain hot liquids. Ensure that at least one of the two surfaces to be adhered is porous.

Bostik Clear is flammable. Always work in a ventilated area. Do not breathe in vapours. Avoid exposing product to any ignition sources and do not smoke when working with the product.

Bostik Clear Gel is a non-drip gel formulated fast drying, multi-purpose adhesive designed to give good adhesion to a wide variety of household materials. Exhibits excellent adhesion to many materials such as paper, cardboard, leather, ceramics, glass, wood, fabrics, rubber, felt, metal, and some plastics like rigid PVC and Perspex. Clear Gel Adhesive is a must have for home, school and office work, where it can be used for art and crafts, scrapbooking, photo albums, school projects, handicraft and decorative work, greeting cards, invitations, paper decorations, bonding of electrical/alarm cabling and general DIY tasks where quick repairs are required. It is acid free and will not yellow or damage paper.

Not be used on painted or polished surfaces. Not suitable for use on some plastics like polyethylene, polypropylene, polystyrene plastics, rayon and acetate fabrics. Should not be used for the repair of pottery handles or any items that may contain hot liquids. Ensure that at least one of the two surfaces to be adhered is porous.

Bostik Clear Gel is flammable. Always work in a ventilated area. Do not breathe in vapours. Avoid exposing product to any ignition sources and do not smoke when working with the product.

Bostik Clear Gel is a non-drip gel formulated fast drying, multi-purpose adhesive designed to give good adhesion to a wide variety of household materials. Exhibits excellent adhesion to many materials such as paper, cardboard, leather, ceramics, glass, wood, fabrics, rubber, felt, metal, and some plastics like rigid PVC and Perspex. Clear Gel Adhesive is a must have for home, school and office work, where it can be used for art and crafts, scrapbooking, photo albums, school projects, handicraft and decorative work, greeting cards, invitations, paper decorations, bonding of electrical/alarm cabling and general DIY tasks where quick repairs are required. It is acid free and will not yellow or damage paper.

Not be used on painted or polished surfaces. Not suitable for use on some plastics like polyethylene, polypropylene, polystyrene plastics, rayon and acetate fabrics. Should not be used for the repair of pottery handles or any items that may contain hot liquids. Ensure that at least one of the two surfaces to be adhered is porous.

Bostik Clear Gel is flammable. Always work in a ventilated area. Do not breathe in vapours. Avoid exposing product to any ignition sources and do not smoke when working with the product.

Bostik Clear is a strong, fast drying, multi-purpose adhesive designed to give good adhesion to a wide variety of household materials. Exhibits excellent adhesion to many materials such as paper, cardboard, leather, ceramics, glass, wood, fabrics, rubber, felt, metal, and some plastics like rigid PVC and Perspex. This fast drying general purpose glue is a must have for home, school and office work, where it can be used for art and crafts, scrapbooking, photo albums, school projects, handicraft and decorative work, greeting cards, invitations, paper decorations and general DIY tasks where quick repairs are required. It is acid free and will not yellow or damage paper.

Not be used on painted or polished surfaces. Not suitable for use on some plastics like polyethylene, polypropylene, polystyrene plastics, rayon and acetate fabrics. Should not be used for the repair of pottery handles or any items that may contain hot liquids. Ensure that at least one of the two surfaces to be adhered is porous.

Bostik Clear is flammable. Always work in a ventilated area. Do not breathe in vapours. Avoid exposing product to any ignition sources and do not smoke when working with the product.

Soudal Universal Silicone Sealant is an acetic cure silicone for sealing and bonding in bathrooms and kitchens which contains a high-performance fungicide.
The product will seal and bond to most sanitary surfaces such as tiles, glazed surfaces, glass, enamel, aluminium, bricks, gypsum board, timber, ceramics, porcelain etc. Acetic cure silicones are not suitable for bathroom plastics. Cannot be painted.

Applications:
Highly suitable for sealing and bonding applications in bathrooms, showers and kitchens with long term exposure to moisture.

Soudal Fill and Fix Polyurethane Foam 500ml. Quick and easy filling of all types of gaps and cracks in all types of construction materials.

Powr polyurethane foam is a multi-purpose polyurethane foam that can be used for filling around door and window frames, insulating hot and cold-water pipes, sealing, and general filling of gaps and cracks. Filfoam bonds to most building materials except silicone, teflon, polyethylene, and polypropylene.
It is resistant to all weather conditions and hardens in 2 to 4 hours in wet conditions. After hardening, excess filfoam can be cut away, cleaned, and painted.

Properties:
Excellent adhesion on most materials (except pe/pp)
High thermal and acoustic isolation
Very good filling capacity
Excellent mounting ability

Application details:
Assembling and sealing of windows and door frames.
Filling of cavities.
Sealing of all openings in roof constructions.
The creation of a soundproof screen.
Substrate: All substrates except pe, pp.
State of surface: Clean, free of dust and grease.
Preparation: Moistening of the surfaces improves adhesion, curing and cellular structure.
Application method: Shake the can approximately 20 times before use.

Packaging:
Shelf life:
Store the product in a cool and dry place.
The shelf life is 12 months at temperatures between 0°c and 25°c.

Caution:
Keep out of reach of children.
Use in a well-ventilated area.
Don’t smoke near the application -flammable.
Take the usual industrial hygiene precautions.
Wear gloves and safety goggles.
Remove cured foam by mechanical means only, never burn away.

Universal strong dual-component epoxy adhesive for repairing metal, pottery, porcelain, glass, pearls, precious stones and various synthetics. Temperature resistant, water resistant, chemical resistant and paintable.

Application
Suitable for: Repairs to metal, ceramics, porcelain, crystal, glass, pearls, precious stones and various synthetics (polyester, bakelite, formica, rigid polystyrene and acrylic glass (Perspex®).
Not suitable for: Polyethylene (PE), polypropylene (PP), PTFE and silicone rubber.

Handling
Before use: Working conditions- Only apply at temperatures between +10 °C and +35 °C. Product cures by mixing the resin and the hardener.
Surface requirements: The surface must be dry, clean and free of dust and grease.
Preliminary surface treatment: Degrease parts to be bonded with methylated spirit. Roughen smooth surfaces (sandpaper).
Tools: Mix the components by means of the supplied mixing bowl and spatula.
Mixture ratio: 1:1
Coverage: 1 ml = approx 10 cm² at a film thickness of 1 mm

Directions For Use:
Press out an equal amount of both components onto the enclosed mixing tray.
Mix these two equal parts well with a spatula until a mixture is obtained with a homogeneous colour.
Apply the mixture, which at room temperature (+20 °C) remains toolable for about 1.5 hours, as a thin layer on one of the two materials.
Join the materials and keep them in place for 7 hours.
Be careful not to move the parts before the adhesive has cured.
Resin and hardener must not come into contact with each other unless for usage.

Advice
Some types of synthetics can not be joined such as polyethylene and polypropylene. Use a piece of adhesive tape in order to keep the parts in place while the adhesive is curing.

Points of attention
Close well after use.
For optimum performance it is important to create a larger amount of adhesive and mix it very well.
Curing time depends on the temperature.
Adhesive does not cure below +5 °C.
Stains/residue: Remove wet stains immediately with warm water and soap. Cured adhesive residue can only be removed mechanically.

Storage conditions: Store in tightly closed packaging in a dry, cool and frost-free place.

Super-strong universal contact adhesive based on neoprene rubber. For innumerable repair and DIY jobs that require immediate bonding. Extremely suitable for materials under strain. Moisture and frost proof. Resistant to temperatures between -15 °C and +70 °C.

Suitable for:
Ideally suited for surface bonding or laminating of many materials that require immediate bonding, loading or processing.
Bonds wood, board, veneer, plastic and metal panel boards (HPL, Formica®, for example), (foam) rubber, leather, cork, canvas, linoleum and polyether foam (sound insulation), among other things, to itself as well as to many other surfaces.
Also for repairing shoes, bags, toys and carpets, or for doing (hobby) handicraft work.

Not suitable for: Polystyrene foam (Tempex®), PE, PP, PTFE and vinyl.

Working conditions: Use adhesive and parts to be bonded at room temperature only. The relative humidity must be below 65 %. This is to avoid formation of bubbles in the final product. Once attached, adjustment is no longer possible. Always test on an (inconspicuous) part of the surface first.
Surface requirements: Surfaces must be dry, clean, dust- and grease-free and a good fit.
Preliminary surface treatment: Clean and degrease the surfaces to be bonded for optimal results.
Tools: Use a solid brush or fine-toothed (1 mm) glue spreader to cover large surfaces. Use a roller or rubber mallet to join the materials firmly.
Preparation of product: Stir well before use. Should preferably not be diluted
Coverage: 2 - 2.5 m²/litre, applied on both sides, depending on the nature of the materials to be bonded.

Directions For Use
Parts must be clean, dry and free of grease.
Coat both substrates completely.
Allow to dry for a minimum of 10 - 40 minutes.
In case of porous materials, apply a second coat and let dry.
Then join parts and roll or tap firmly (with a rubber mallet).

Points of attention
For optimum results, both the adhesive and the parts to be bonded must be at room temperature (definitely do not use below +10 °C).
The final bonding strength depends on the pressure applied.
Therefore, press as firmly as possible across the entire surface.
Should the adhesive joint between porous materials be exposed to long-lasting contact with water, the adhesive may detach from the wet surface.
Stains/residue: Remove fresh adhesive residue immediately with Acetone. Dried adhesive residue can only be removed mechanically or with a paint remover (test first).

Storage conditions: Store properly closed in a cool and frost-free place. Shelf life is a minimum 24 months.

- Ponal Wood Glue is suitable for DIY, hobby, craft and school projects.
- Dries faster, clearer and stronger

The original, high quality PVA (polyvinyl acetate) glue and has been the best selling glue in SA for over 50 years. It sets quickly and is a universal glue that can be used for woodworking, furniture manufacture and other joinery work, or every day use, for bonding wood, leather, felt, cloth, board and paper. Excellent adhesion to medium woods, soft woods,processed board, leather, cloth, felt, paper, cardboard, cork and most other porous materials.

High modulus PU sealant-adhesive with excellent mechanical performance and chemical resistance for a wide range of bonding and sealing applications on concrete (i.e. floors and walls) and metals.


Applications
Sealing and bonding applications in the manufacturing and construction industries. Structural bondings on materials subject to vibration and movement. Sealing applications including concrete flooring joints.

The Chemical Anchor Vinylester 420ml Styrene-Free (700405) by Domin is a high-performance adhesive solution designed for anchoring applications in construction and industrial settings. This styrene-free vinylester resin provides strong bonding for concrete, masonry, and other solid materials, offering superior load-bearing capacity and durability. Its fire-rated properties make it an excellent choice for environments where fire resistance is critical. The 420ml cartridge is easy to use with a suitable applicator, making it ideal for professional installations and repairs. This chemical anchor is perfect for securing bolts, rods, or other fixtures in high-demand applications.

The Chemical Anchor Polyester 300ml Styrene Free Dynamic 700406 is a high-performance anchor resin designed for use in construction and anchoring applications. It is a styrene-free, polyester-based adhesive, providing strong bonding for various materials like concrete and masonry. This product is ideal for setting rebar, bolts, and other fixtures, offering improved safety and environmental benefits due to its lack of styrene. With a 300ml volume, it is suitable for both small and medium-scale projects.

The Chemical Anchor Vinylester 300ml Styrene Free (700526) is a high-performance adhesive used for anchoring applications in concrete, masonry, and brick. It features a vinylester-based formula that provides strong bonding and is styrene-free, making it more environmentally friendly and safer to use. This product is fire-rated, offering added protection in fire-sensitive areas. The 300ml cartridge is easy to apply and is typically used in construction and engineering applications, providing a durable, reliable anchor for heavy-duty fixtures.

Bulk Pack x 4 Pratley - 40ml Quickset Steel

High modulus PU sealant-adhesive with excellent mechanical performance and chemical resistance for a wide range of bonding and sealing applications on concrete (i.e. floors and walls) and metals.


Applications
Sealing and bonding applications in the manufacturing and construction industries. Structural bondings on materials subject to vibration and movement. Sealing applications including concrete flooring joints.