Soudal Tile Adhesive 24A 5kg is a strong, flexible, solvent-free adhesive paste, suitable for the bonding of all types of tiles onto horizontal and vertical surfaces. Can be used to bond tiles over old tile surfaces.

Applications:
For the bonding of all types of wall- and floor tiles. Tile-on-tile bonding is possible. Highly suitable for applications in humid areas (bathrooms, kitchens)

Soudal Calofer Extreme High Temperature is a high-quality sealing paste based on sodium silicate that can be used in conditions where temperatures can get extremely high – up to 1500°C. Perfect for sealing applications in ovens, fireplaces, and other hot areas.


Applications:
Sealing of joints and openings in high-temperature areas
Installation of heating systems, furnaces, etc.


Direction for use:
Type: concrete, metal, bricks
State of Surface: clean, free of dust and grease
Preparation: slight moistening of the surface increases adhesion
We recommend a preliminary compatibility test.

Bulk Pack x 3 Kaufmann Multi Purpose Adhesive Foam 750ml

Flash Harry Waterproofing Membrane - 250mm x 10m

Bulk Pack x 3 Kaufmann Silicone 280ml Black

Flash Harry Waterproofing Membrane - 200mm x 10m

The Chemical Anchor Polyester 300ml Styrene Free Dynamic 700406 is a high-performance anchor resin designed for use in construction and anchoring applications. It is a styrene-free, polyester-based adhesive, providing strong bonding for various materials like concrete and masonry. This product is ideal for setting rebar, bolts, and other fixtures, offering improved safety and environmental benefits due to its lack of styrene. With a 300ml volume, it is suitable for both small and medium-scale projects.

Glue-Devil Silicone Marine 2 Pack (90ml) (Clear)

Soudal Universal Silicone Sealant is an acetic cure silicone for sealing and bonding in bathrooms and kitchens which contains a high-performance fungicide.
The product will seal and bond to most sanitary surfaces such as tiles, glazed surfaces, glass, enamel, aluminium, bricks, gypsum board, timber, ceramics, porcelain etc. Acetic cure silicones are not suitable for bathroom plastics. Cannot be painted.

Applications:
Highly suitable for sealing and bonding applications in bathrooms, showers and kitchens with long term exposure to moisture.

THE POWR RANGE OF WATERPROOFING PRODUCTS ARE IDEAL FOR THE HARSH SOUTH AFRICAN CLIMATE.

POWR now provides you with all your high quality, eco-friendly, waterproofing products under one trusted brand.

Introducing our dynamic waterproofing range – the ultimate solution to protect your surfaces against moisture, leaks, and water damage. Our range of high-performance waterproofing solutions include POWR Rubber Seal, POWR Bonding Liquid, POWR Membranes and POWR Waterproofing Tapes. They are specially formulated to provide a reliable barrier against the elements, keeping your walls, floors, and structures waterproof and pristine. POWR Waterproofing products that offer both a variety of functional solutions and easy application.



PERFORMANCE BENEFITS:
•Bonds to most construction materials
•Elongates 100% with 95% recovery - Highly stretchable and contracts to its original form.
•Withstands thermal cycling
•Puncture resistant
•Strong UV exposure
•Withstands exposure to industrial chemicals
•Improves lifespan of coated substrates.
•Corrosion control.
•Encapsulation (Asbestos).
•Environmentally Friendly and can be applied were rainwater is harvested.
•Waterproofing that can withstand ponding of water.
•Can be applied to all construction materials
•Spray, paint or roller applied.
•Total ambient temperature application - No heating or propane flame heating required.
•Seals joints and covers fine cracks

PRODUCT USES:

•For all roof types/structures including:
•Fibre cement roof sheets
•Cement roof tiles
•Chromadek
•Zinc Alum and AluZinc
•Exterior trims such as facias, gutters, window sills and cement garden pots

APPLICATION:
•Always Mix POWR Rubber Seal well before use.
•Make sure all substrates are completely clean, sound, dry, and free from any laitance (a white film that forms on the surface of drying concrete), fungus, grease, oil, or loose and flaking particles.
•Do not dilute POWR Rubber Seal (application ready)
•Apply two coats by brush or roller
•A third coat is recommended for coastal areas.
•Determined by the condition, allow approximately an hour drying time between coats.
•Touch dry time is approximately 2 hours in hot dry conditions (25°C)


POWR WATERPROOFING MEMBRANE APPLICATION:
•Apply a generous coat of POWR Rubber Seal.
•Press membrane into wet POWR Rubber Seal surface.
•Apply a generous coat of POWR Rubber Seal over membrane until covered and allow to dry for 90 minutes
•Apply a final coat of POWR Rubber Seal over coated surfaces.


GALVANIZED METAL ROOF SHEETING APPLICATION:
Wash all fungi-infested areas and cracks with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose flaking and powdery paint or surface laitance by pressure washing. Prime all rust-affected areas ( if any ) with Triple Red Rust Converter.



NEW METAL SURFACES:
Apply one coat of Anti Corrosion Metal Primer to entire surface and allow to dry for 2-3 hours before overcoating. The area must be overcoated within 24 hours to prevent a loss in adhesion. Apply two coats of POWR Rubber Seal (0.8kg - 1kg / m2)


WEATHERED METAL SURFACES:
Apply one coat of Anti Corrosion Metal Primer to entire surface and allow 2-3 hours drying time before overcoating. The area must be overcoated within 3 days to prevent a loss in adhesion. Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg / m2)


PROBLEMATIC METAL AND BITUMEN SURFACES:
An Acid Metal Etch Primer is advisable to use as a substitute for Anti Corrosion Metal Primer under the following circumstances: Where flaking of factory-coated metal sheeting is observed. Over areas that were coated with bituminous products apply Bitumen Barrier Primer.


METAL AND CHROMADECK ROOF SHEETING:
Wash all fungi-infested areas with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose flaking and powdery or surface laitance by pressure washing. Prime all rust-affected areas (if any) with Triple Red Rust Converter. Scour the entire surface with a scouring pad to promote adhesion of the subsequent coatings.
APPLICATION:
•Apply a coat of Anti Corrosion Metal Primer.
•Prime all areas (full primer) and allow to dry for +- 8 hours.
•Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg /m)


ASBESTOS, NUTEC ROOF SHEETING AND CEMENT TILES:
Wash all fungi-infested areas with a Fungi Wash and leave for 24 hours to react. This will kill spores and limit fungal growth. Remove all loose, flaking and powdery or surface laitance by pressure washing. Prime all rust-affected areas (if any) with Triple Red Rust Converter.
Scour the entire surface with a scouring pad to promote adhesion of the subsequent coatings.
APPLICATION:
•Apply one coat of POWR Bonding Liquid to all areas (full primer), and allow to dry for +- 8 hours.
•Apply two coats of POWR Rubber Seal ( 0.8kg - 1kg/m2)


COVERAGE:
•Coverage will vary depending on the substrates/surface porosity.
•Coverage must be between 0.8kg - 1kg / m2


MAINTENANCE COAT:
To ensure warranty a maintenance coat must be applied every 3 - 4 years

WHAT MAKES IT UNIQUE:
•Spray or brush applied at ambient temperature
•Cures into a seamless membrane
•Excellent Waterproofing
•Corrosion resistance
•Chemical resistance
•Encapsulation


ROOF COVER APPLICATION:
•Waterproofing
•Encapsulating
•Rust Prevention
•Rust Rehabilitation
•Chemical protection

ROOF SURFACES:
•Metal Sheeted Roofs
•Tiled Roofs
•Asbestos / Nutech Roofs
•Concrete Slab Roofs


CLEAN UP:
Clean equipment with warm, soapy water


TRANSPORTING PAINT:
It is important to make sure that your paint products are properly and safely secured upright when transporting them.


SAFETY PRECAUTIONS:
•Keep out of reach of children.
•Read the label before use
•Ensure good ventilation during application and drying.
•In case of skin contact, wash with soap and water or a recognized skin cleaner. Avoid contact with eyes - in case of contact, rinse your eyes immediately with plenty of water and seek medical advice if symptoms persist. If ingested, drink plenty of water/milk. Do not induce vomiting. Seek medical attention.
•Store in a closed container.
•Store in a well-ventilated place.
•Keep cool.
•Dispose of contents/containers by local regulations
•Refer to safety data sheets and technical data sheets for further information

Soudal Adhesive Fix All High Tack White 290ml super strong sealant and adhesive with high initial tack and end strength (320kg/10cm²). Based on SMX Polymer Technology, High Tack achieves high-performance flexible bonding and sealing of all types of materials onto almost any surface, both porous and non-porous, even if wet or humid. Contains XS1 fungicide providing ultimate resistance against mould growth.

Applications:

For all bonding, sealing and filling applications where initial grab and final bond strength is important. Heavy duty bonding and sealing in all weather conditions and on most surfaces. Also suitable for bonding porous natural stone surfaces, such as marble and limestone. Sanitary sealing and bonding.

High grade zinc spray (98% zinc content). Has a galvanizing action. Protects zinc and unprocessed iron and steel against corrosion. Due to its cathodic action, the spray is very economical and effective. Shiny finish. 400ml aerosol can.

Application:

Alu-Zinc Spray has a galvanizing effect that protects zinc and unprocessed iron or steel against corrosion. To be used for coachwork, gutter braces, weld joints and spot welding. Can be used on rust.

Soudal Filler Polyurethane Foam Genius 600ml. An all purpose, hand-held gap filling expanding PU Foam with patented "Genius Gun" application system. Reusable up to 6 weeks, the Genius Gun applicator enables high precision, single-handed use.
Ideally suited for the installation of doors and windows, the sealing of pipe penetrations and for the creation of sound-proof sealing.
Free of CFC's and HCFC's.
Very low emission value once fully cured.

Applications:
General all-purpose filling of holes, gaps and joints. Adheres to all common building materials, resistant to water, heat and ageing. Can be cut, sanded, plastered and painted after full cure.

Instructions:

Shake the can for at least 30 seconds before use. Open the cover and fold the tube horizontally. Hold the can upside down and extrude the foam. Gaps are to be filled by approximately 1/3. Repeat shaking regularly during application. If you have to work in layers repeat moistening after each layer. Application temperature: + 5°C - + 30°C. For storage: detach the bung, close nozzle with bung, close the cap and store can upright

Soudal Sealant Fix All Crystal Clear 290ml Cartridge for all bonding and sealing applications both inside and outside where transparency is important.
100% crystal clear sealant, adhesive and filler, based on SMX Hybrid Polymer technology. Suitable for internal and external use. Can be applied in all weather conditions. Primerless adhesion on most construction materials, including wet and damp surfaces. Contains XS1 fungicides providing ultimate mould resistance.

Soudal Fix All High Tack Invisible 290ML is a high strength flexible adhesive which combines very high end strength with high initial tack. The product is 100% transparent and can be applied both outside and inside. It can be painted and used in sanitary areas.

Applications:
For bonding applications both inside and outside where a transparent product is needed and where initial grab and high end strength is important. Can be used on humid substrates.

Soudal Universal Silicone Sealant is an acetic cure silicone for sealing and bonding in bathrooms and kitchens which contains a high-performance fungicide.
The product will seal and bond to most sanitary surfaces such as tiles, glazed surfaces, glass, enamel, aluminium, bricks, gypsum board, timber, ceramics, porcelain etc. Acetic cure silicones are not suitable for bathroom plastics. Cannot be painted.

Applications:
Highly suitable for sealing and bonding applications in bathrooms, showers and kitchens with long term exposure to moisture.

Soudal Chemical Anchor Ca 1400kg 280ml is a two-component anchoring resin for the pressure-free securing of anchoring rods, studs, reinforcing bars, threaded collars, profiles etc… in various solid and hollow materials, such as concrete, cracked concrete, solid brick, hollow brick, porous concrete, natural stone, plasterboard walls, etc..

Application area:
Securing of heavy loads in solid and hollow building materials. Pressure free anchoring even close to edges. Can be used as repair mortar.

A durable, flexible multi-purpose filler ideal for filling and mending gaps or cracks both indoors and out.

Caulking Gun Standard Duty

Bulk Pack x 14 Q-Bond Adhesive 5ml