The MTD8 is a 30A 16 On/Off Digital Programmable Timer that is easy-to-use, quick to set and will maximize your savings. When installing the MTD8 for the first time, press the reset button to activate the timer. The introduction of a timer will improve your energy savings up to 66%. Switching the geyser off/on manually is not good practice as circuit breakers are not designed to be switched often and will eventually damage which can be costly to replace.

Features:
•    Din Rail Mounted
•    Advanced weekly settings
•    Repeat programs with 16 ON/OFF settings, 18 pulse settings, and a manual ON/OFF switch
•    Lithium battery back up in the event of a power failure
•    MANUAL button changes between Manual ON/OFF, ON AUTO and AUTO OFF
•    Terminology: ON (Always ON), OFF (Always OFF), AUTO ON (Timer remains ON until the next OFF programmed setting) / AUTO OFF (Timer remains OFF until next programmed ON setting and turns OFF as per programmed OFF settings)
•    AUTO OFF – Automatically turns the timer ON and OFF as per the programmed settings
•    While programming any function, 30 seconds of inactivity will exit all setting menu

*NOTE: Press Reset Button to activate timer (only required when first installed).

ADDITIONAL INFORMATION:
•    Voltage Rating:    220V – 240V AC 50/60Hz
•    Voltage Limit: ±10%
•    Resistive Loads (Max): 30A (4400W)
•    Minimum Interval: 1 minute
•    Countdown Interval: 1 second – 99 minutes & 59 seconds
•    18 Pulse Intervals: 1 second – 59 minutes & 59 seconds
•    Ambient temperature: -10°C ~ 40°C
•    Ambient Humidity: 35%RH ~ 85%RH
•    Weight:     150g
•    Certification: IEC60730-1, IEC60730-2-7

Choose from a variety of programmable timers that are easy to use, quick to set, and will maximize your savings. The introduction of a timer will improve your energy savings by up to 66%.

Choose from a variety of programmable timers that are easy-to-use, quick to set and will maximise your savings. The introduction of a timer will improve your energy savings up to 66%. Switching the geyser off/on manually is not good practice as circuit breakers are not designed to be switched often and will eventually damage which can be costly to replace.

Choose from a variety of programmable timers that are easy-to-use, quick to set and will maximise your savings. The introduction of a timer will improve your energy savings up to 66%. Switching the geyser off/on manually is not good practice as circuit breakers are not designed to be switched often and will eventually damage which can be costly to replace.

Electrical extension cord, ideal for use around the home and DIY projects. 16 AMP Current draw.

Galvanised Hollow Plug - 15mm (10 Piece Pack)

The Brass Conical Strainer 6mm x 1/2" M is a filtration device used to remove debris or particles from fluids or gases in various systems. It features a 6mm inlet and a 1/2" male thread, allowing it to easily connect to compatible piping or equipment. The conical design helps to filter out contaminants while allowing efficient flow. Made from brass, it provides durability, corrosion resistance, and long-lasting performance, making it suitable for use in plumbing, pneumatic, or hydraulic systems where clean fluid or air flow is essential.

The Brass Conical Strainer 6mm x 3/8" M is a filtration component designed to remove debris or particles from liquids or gases in plumbing, pneumatic, or hydraulic systems. It features a 6mm inlet and a 3/8" male thread, allowing it to be easily installed into compatible systems. The conical shape ensures efficient flow and filtration, while the durable brass construction offers resistance to corrosion and wear. This strainer is ideal for applications where clean flow is essential, helping to protect downstream components from damage or clogging.

A brass conical straight 6mm x 1/4" M is a type of fitting or connector made from brass, designed for use in fluid, air, or gas systems. The 6mm refers to the outer diameter of the conical (tapered) end, which is typically used to connect hoses or tubing, while the 1/4" male (M) thread on the opposite end is designed to fit into female-threaded components. The conical design helps create a tight, leak-proof seal when the parts are connected. Made of durable brass, it is resistant to corrosion and commonly used in plumbing, pneumatic, or hydraulic applications.

Veti’s Pull Up Tower has a patented design with a spring-loaded handle and made from strong aluminium housing which allows the tower to be out of sight when in use. Easy to install 1-2-3-4 step guide. Ideally suited for homes, offices, hotels, conference rooms and more.
Components :
2 x USB Chargers (2.1 Amp Output)
2 X RSA V-Slim Socket Outlets
2 x RSA Standard Socket Outlets
1 x Thermal Overload Switch
1.6m Standard SA plug extension
Certification :
IEC60884-1 + IEC60884-2-7
SANS164-0 + SANS164-1 + SANS164-2 + SANS1661
VC802

A Brass Conical Straight Joint 6mm is a fitting used to connect 6mm tubing in pneumatic, hydraulic, or fluid systems. The conical design provides a secure, tight fit, reducing the risk of leaks. Made from brass, the joint is durable, corrosion-resistant, and suitable for high-pressure applications. This straight connector is typically used to join two pieces of tubing or pipes in a direct, linear configuration, providing a reliable and long-lasting connection in various industrial or plumbing applications.

Corner Units are installed using screws to ensure a sturdy and strong positioning. The corner units can be installed horizontally or vertically. Ideally suited for homes, offices, hotels, conference rooms and more!
Components :
2 x USB Chargers (2.1 Amp Output)
2 X RSA V-Slim Socket Outlets
2 x RSA Standard Socket Outlets
1 x Thermal Overload Switch
1.6m Standard SA plug extension
Installation :
Drill and partially tighten screws to wall as per dimensions provided in diagram above
Place unit over screws and slide unit left or right for horizontal installation or slide down for vertical installation to fasten securely
Certification :
IEC60884-1 + IEC60884-2-7
SANS164-0 + SANS164-1 + SANS164-2 + SANS1661
VC802

A Brass Conical Straight Joint 12mm is a pipe fitting made from brass designed to connect two pipes of 12mm diameter in a straight line. The conical shape of the joint ensures a secure, leak-resistant connection by providing a tapered fit that helps create a strong seal between the pipes. This fitting is commonly used in plumbing, pneumatic, or hydraulic systems, where a reliable and durable connection is essential. The brass construction offers resistance to corrosion and wear, making it suitable for a variety of environments.

Manufactured from metal with brass contact points. Complete with rubber shroud.

The Brass Conical Straight Joint (8mm) is a durable fitting used to connect 8mm hoses or tubing in fluid or pneumatic systems. Made from high-quality brass, it provides strength, corrosion resistance, and long-lasting performance in both high and low-pressure applications. The conical design ensures a secure, tight seal for leak-free connections, making it ideal for air, water, and other fluid transfer systems. This fitting is commonly used in industrial, automotive, and DIY pneumatic setups.

A Brass Conical Straight Joint 10mm is a type of pipe fitting made from brass and designed to connect two pipes in a straight line. The conical shape helps provide a secure, tight connection by offering a tapered fit that improves the seal between the pipes. With a 10mm size, this joint is typically used for smaller diameter pipes in applications like plumbing, hydraulic, or pneumatic systems. The brass material ensures durability, corrosion resistance, and reliability, making it ideal for both indoor and outdoor installations.

Introducing the EcoFlow MC4 to XT60 Connector Cable, connect a Solar Panel to an EcoFlow Portable Power Station for clean, efficient, and reliable power wherever you go.

The MC4 to XT60 Connector Cable allows for easy charging of your EcoFlow Portable Power Station via solar power thanks to this charging cable. Simply connect it to your EcoFlow Solar Panel via the standard MC4 port and connect it to your Portable Power Station via the XT60 connection. The EcoFlow Solar to XT60 Charging Cable is ideal for use on camping trips, a day at the beach, and family barbecues

The Solar to XT60 Charging Cable lets you link the DELTA or RIVER series power stations to a solar panel. That includes EcoFlow or third-party panels.
Use Case: If you want to charge the DELTA or RIVER series power stations with solar panels, use the Solar to XT60 cable to connect the two. Perfect for use on campsites, beach trips, and family barbecues.

A PU Hose Fitting Valve 6mm-6mm is a pneumatic valve designed for use in PU (polyurethane) tubing systems, commonly found in air and fluid transfer applications.

Specifications:
Size: 6mm on both ends, typically referring to the inner diameter of the tubing or fittings that the valve connects to
Material: Usually made from durable plastic or metal, providing strength and resistance to wear
Design: A valve fitting that controls the flow of air or fluids within a pneumatic system, allowing for on/off control or regulating the flow
Function: Used for connecting and disconnecting tubing while maintaining pressure and controlling the flow, commonly used in pneumatic tools, automation systems, or fluid handling applications
Applications:
Commonly used in pneumatic control systems, air tools, fluid delivery systems, and automated machinery. The 6mm-6mm valve ensures secure connections and precise control over the flow of air or fluids.

The MTD6 surge protector is ideal for use on computers, printers, televisions, home centres and equipment that require protection against surges.

16A Three-pin appliance connector. Manufactured from PVC, top screw fixed. Solid copper pins.

Cassette reel can be used to extend an electrical connection in your house, campsite or office to connect appliances or devices.

Electrical extension cord with 10A double janus coupling.

A PU Hose Fitting Valve 8mm-8mm is a valve designed to connect 8mm polyurethane (PU) tubing in pneumatic systems, allowing control over the flow of air or fluid.

Specifications:
Size: 8mm on both ends, typically referring to the inner diameter of the tubing or fittings that the valve connects to
Material: Usually made from durable plastic or metal, offering strength and resistance to wear
Design: The valve allows for on/off control, flow regulation, or quick disconnection of tubing within pneumatic or fluid systems
Function: Primarily used for regulating or controlling air or fluid flow in pneumatic tools, air compressors, or fluid systems
Applications:
Common in industrial applications, automated systems, pneumatic tools, and fluid control systems, this valve ensures secure connections, precise flow control, and reliable performance in environments that require consistent air or fluid delivery.

A Taper Adapter MT3 - JT4 is a precision tool used to connect machines with different taper sizes, specifically Morse Taper (MT3) and Jacobs Taper (JT4).

MT3 (Morse Taper 3): A standard taper used in toolholders, drills, and other machine tools for a secure and precise fit. JT4 (Jacobs Taper 4): A type of taper commonly used for chuck mounting and drill bit installations
Material: Typically made from high-strength steel for durability and precision. Function: The adapter allows the use of tools or accessories designed for Jacobs Taper 4 (JT4) with a machine that uses Morse Taper 3 (MT3) sockets
This adapter is useful in machining, tool setups, and lathe operations, enabling the use of a broader range of tools and chucks on machines with different taper systems. Ideal for workshops and industrial settings requiring quick tool changes and precise, secure fittings.

The Taper Adapter MT2 - JT4 is a tool designed to adapt one type of taper to another, typically used in machining and tool-holding applications. Its key features include:

MT2 (Morse Taper 2): This is the size of the male taper, commonly used in drilling machines, lathes, and other equipment. MT2 is a medium-size Morse taper, typically used for medium-sized tools and spindles. JT4 (Jacobs Taper 4): This refers to the female taper, which is used to securely hold drill chucks and other accessories in place on machinery. JT4 is a specific size of Jacobs taper, often used in drill chucks for larger drilling applications. This adapter allows you to connect an MT2 spindle to a JT4 chuck or tool holder, making it versatile for different types of machinery and tasks. It’s commonly used in lathe or drill press setups where you need to switch between different tool or chuck systems while maintaining precision and a secure fit.