The MTD8 is a 30A 16 On/Off Digital Programmable Timer that is easy-to-use, quick to set and will maximize your savings. When installing the MTD8 for the first time, press the reset button to activate the timer. The introduction of a timer will improve your energy savings up to 66%. Switching the geyser off/on manually is not good practice as circuit breakers are not designed to be switched often and will eventually damage which can be costly to replace.

Features:
•    Din Rail Mounted
•    Advanced weekly settings
•    Repeat programs with 16 ON/OFF settings, 18 pulse settings, and a manual ON/OFF switch
•    Lithium battery back up in the event of a power failure
•    MANUAL button changes between Manual ON/OFF, ON AUTO and AUTO OFF
•    Terminology: ON (Always ON), OFF (Always OFF), AUTO ON (Timer remains ON until the next OFF programmed setting) / AUTO OFF (Timer remains OFF until next programmed ON setting and turns OFF as per programmed OFF settings)
•    AUTO OFF – Automatically turns the timer ON and OFF as per the programmed settings
•    While programming any function, 30 seconds of inactivity will exit all setting menu

*NOTE: Press Reset Button to activate timer (only required when first installed).

ADDITIONAL INFORMATION:
•    Voltage Rating:    220V – 240V AC 50/60Hz
•    Voltage Limit: ±10%
•    Resistive Loads (Max): 30A (4400W)
•    Minimum Interval: 1 minute
•    Countdown Interval: 1 second – 99 minutes & 59 seconds
•    18 Pulse Intervals: 1 second – 59 minutes & 59 seconds
•    Ambient temperature: -10°C ~ 40°C
•    Ambient Humidity: 35%RH ~ 85%RH
•    Weight:     150g
•    Certification: IEC60730-1, IEC60730-2-7

Choose from a variety of programmable timers that are easy to use, quick to set, and will maximize your savings. The introduction of a timer will improve your energy savings by up to 66%.

Choose from a variety of programmable timers that are easy-to-use, quick to set and will maximise your savings. The introduction of a timer will improve your energy savings up to 66%. Switching the geyser off/on manually is not good practice as circuit breakers are not designed to be switched often and will eventually damage which can be costly to replace.

Choose from a variety of programmable timers that are easy-to-use, quick to set and will maximise your savings. The introduction of a timer will improve your energy savings up to 66%. Switching the geyser off/on manually is not good practice as circuit breakers are not designed to be switched often and will eventually damage which can be costly to replace.

The MTS22 Smart programmable timer is specifically designed for users to gain full control of their timer via a smart device. This timer is equipped with Wi-Fi and Bluetooth connectivity, allowing users to utilize the free “Major Tech Hub” Smart App for remote monitoring and control. It adheres to Wi-Fi 802.11b/g/n standards for seamless data communication.

The VFM1 is a Flush Mount Power Tower that is the ideal solution for a compact design combination of sockets, Type-A and Type-C USB charging outlets which sit flush to the surface of any counter. When installed there is a slight protrusion of 2mm above the flat surface to ensure the sockets are accessible yet flush to the table. The compact height means they can be installed in tight spaces and there is very limited interference under the counter once installed.

Experience next-level power management with the MTS11 Smart Wi-Fi Socket. Setting up is a breeze with its plug-and-play installation. This device transforms a regular appliance into a smart one effortlessly. Simply insert the socket into an outlet, connect your device, sync it with your Wi-Fi, and unlock its potential through the intuitive app. Seamlessly power your device on or off remotely and take charge of your energy consumption. Dive into the app to monitor your device’s real-time energy usage, providing you with the insights you need to optimize your efficiency such as current draw, power consumption, and total kWh. With a robust 16 Amps at 220-240V you can tailor your schedule with precision, whether it’s weekly, daily, hourly or per minute. Experience simplicity, efficiency, and personalization with MTS11, your key to smart living.

Major Tech’s Pull Up Power Towers have a patented design with a spring loaded handle and made from strong aluminium housing which allows the tower to be out of sight when in use. Easy to install 1-2-3-4 step guide. Ideally suited for homes, offices, hotels, conference rooms and more.

The VDMG2 is a Wireless Charging Pop Up Power Tower that has a press and pop up system with wireless charging function, USB A & USB C charging ports and multiple socket outlets for the perfect solution in one unit. The eye-catching glass top finish with blue LED power indication brings elegance and practicality to any location. The Wireless Charging function is built into the top of the power tower which is available when the tower is in both the up and down position. Smartphones must be compatible with wireless charging.

The 8 sockets are arranged so the plug tops do not interfere with one another allowing for all outlets to be used simultaneously. The 2 USB A and 2 USB C charging sockets are ideal for tablets, smartphones and the like. Using the simple push function, the sockets can be raised powerlessly from the tabletop and pushed down out of site when not in use. Installation is quick and simple by tightening the ring nut below the counter when the VDM is mounted in the 121mm cut out hole with a max depth of 180mm.

16A Three- pin appliance connector. Manufactured from rubber, top screw fixed.

The Brass Conical Strainer 6mm x 1/2" M is a filtration device used to remove debris or particles from fluids or gases in various systems. It features a 6mm inlet and a 1/2" male thread, allowing it to easily connect to compatible piping or equipment. The conical design helps to filter out contaminants while allowing efficient flow. Made from brass, it provides durability, corrosion resistance, and long-lasting performance, making it suitable for use in plumbing, pneumatic, or hydraulic systems where clean fluid or air flow is essential.

The Brass Conical Strainer 6mm x 3/8" M is a filtration component designed to remove debris or particles from liquids or gases in plumbing, pneumatic, or hydraulic systems. It features a 6mm inlet and a 3/8" male thread, allowing it to be easily installed into compatible systems. The conical shape ensures efficient flow and filtration, while the durable brass construction offers resistance to corrosion and wear. This strainer is ideal for applications where clean flow is essential, helping to protect downstream components from damage or clogging.

The Brass Male Quick Coupler 1/2" M is a durable and reliable fitting designed to quickly connect and disconnect hoses or pipes in various systems, such as pneumatic or fluid transfer applications. The "1/2" M" indicates a 1/2-inch male thread, allowing it to easily connect to female-threaded components. Made from brass, it offers excellent resistance to corrosion, wear, and damage, making it suitable for use in industrial, automotive, or workshop environments. This quick coupler ensures secure connections and efficient fluid or air flow, making it ideal for applications requiring frequent coupling and decoupling.

A brass conical straight 6mm x 1/4" M is a type of fitting or connector made from brass, designed for use in fluid, air, or gas systems. The 6mm refers to the outer diameter of the conical (tapered) end, which is typically used to connect hoses or tubing, while the 1/4" male (M) thread on the opposite end is designed to fit into female-threaded components. The conical design helps create a tight, leak-proof seal when the parts are connected. Made of durable brass, it is resistant to corrosion and commonly used in plumbing, pneumatic, or hydraulic applications.

Bulk Pack x 10 U-Part Autoshop Positive Terminal - D4052

A Brass Conical Straight Joint 6mm is a fitting used to connect 6mm tubing in pneumatic, hydraulic, or fluid systems. The conical design provides a secure, tight fit, reducing the risk of leaks. Made from brass, the joint is durable, corrosion-resistant, and suitable for high-pressure applications. This straight connector is typically used to join two pieces of tubing or pipes in a direct, linear configuration, providing a reliable and long-lasting connection in various industrial or plumbing applications.

Veti’s Pull Up Tower has a patented design with a spring-loaded handle and made from strong aluminium housing which allows the tower to be out of sight when in use. Easy to install 1-2-3-4 step guide. Ideally suited for homes, offices, hotels, conference rooms and more.
Components :
2 x USB Chargers (2.1 Amp Output)
2 X RSA V-Slim Socket Outlets
2 x RSA Standard Socket Outlets
1 x Thermal Overload Switch
1.6m Standard SA plug extension
Certification :
IEC60884-1 + IEC60884-2-7
SANS164-0 + SANS164-1 + SANS164-2 + SANS1661
VC802

The MTS21 Smart energy meter & timer is specifically designed to measure active and reactive energy for single-phase two-wire systems and various parameters. This smart device is equipped with Wi-Fi connectivity, allowing users to utilize the free “Major Tech Hub” Smart App for remote monitoring and control. It adheres to Wi-Fi 802.11b/g/n standards for seamless data communication. When installing the smart device, ensure that this is done by a qualified professional in accordance with South African regulations and making sure it is placed in an appropriate environment with an ambient temperature range of -25°C to 55°C. The relative humidity should be kept below 75%. The manufacturing of this device aligns with international standards, including IEC62052-11 for General Requirements for Electricity Metering Equipment (AC) and IEC62053-21 for Static meters/timers for Active Energy (Classes 1 and 2). With the MTS21 and Major Tech Hub App, you can easily track your energy consumption by selecting custom date ranges to view data for any specific period. Whether you want to monitor your usage over several days or 2 months, the app provides the flexibility to tailor your insights. Plus, you can download your energy consumption data in Excel format for further analysis or share it seamlessly via third-party apps. Stay on top of your energy habits with the ability to track both daily usage and any custom date range that fits your needs.

A Brass Conical Straight Joint 12mm is a pipe fitting made from brass designed to connect two pipes of 12mm diameter in a straight line. The conical shape of the joint ensures a secure, leak-resistant connection by providing a tapered fit that helps create a strong seal between the pipes. This fitting is commonly used in plumbing, pneumatic, or hydraulic systems, where a reliable and durable connection is essential. The brass construction offers resistance to corrosion and wear, making it suitable for a variety of environments.

Bosch type positive terminal used to attach the wire to the terminal of the battery.

A Brass Conical Straight Joint 10mm is a type of pipe fitting made from brass and designed to connect two pipes in a straight line. The conical shape helps provide a secure, tight connection by offering a tapered fit that improves the seal between the pipes. With a 10mm size, this joint is typically used for smaller diameter pipes in applications like plumbing, hydraulic, or pneumatic systems. The brass material ensures durability, corrosion resistance, and reliability, making it ideal for both indoor and outdoor installations.

The Brass Conical Straight Joint (8mm) is a durable fitting used to connect 8mm hoses or tubing in fluid or pneumatic systems. Made from high-quality brass, it provides strength, corrosion resistance, and long-lasting performance in both high and low-pressure applications. The conical design ensures a secure, tight seal for leak-free connections, making it ideal for air, water, and other fluid transfer systems. This fitting is commonly used in industrial, automotive, and DIY pneumatic setups.

Manufactured from metal with brass contact points. Complete with rubber shroud.

The VDMG2 is a Wireless Charging Pop Up Power Tower that has a press and pop up system with wireless charging function, USB A & USB C charging ports and multiple socket outlets for the perfect solution in one unit. The eye-catching glass top finish with blue LED power indication brings elegance and practicality to any location. The Wireless Charging function is built into the top of the power tower which is available when the tower is in both the up and down position. Smartphones must be compatible with wireless charging.

The 8 sockets are arranged so the plug tops do not interfere with one another allowing for all outlets to be used simultaneously. The 2 USB A and 2 USB C charging sockets are ideal for tablets, smartphones and the like. Using the simple push function, the sockets can be raised powerlessly from the tabletop and pushed down out of site when not in use. Installation is quick and simple by tightening the ring nut below the counter when the VDM is mounted in the 121mm cut out hole with a max depth of 180mm.

The Safety Valve 1/2" Preset 12 Bar is a pressure relief valve designed to protect systems from excessive pressure. With a 1/2" connection and a preset pressure setting of 12 bar, this valve automatically opens to release pressure when it exceeds the 12 bar threshold, ensuring the safety and integrity of the system. It is commonly used in compressed air systems, boilers, and hydraulic systems to prevent damage caused by overpressure. Made from durable materials, it provides reliable, automatic pressure relief to maintain safe operation and protect equipment.